The touchpad on a laptop does not work, what should I do and where should I go?
First of all, you need to understand what a touchpad is and what the problem might be.
Touchpad (from the English touchpad - touch pad) - a device for controlling the cursor in .
The device was invented in 1988 by George Gerfeide, but gained popularity only 6 years later, after licensing and installation on PowerBook laptops from Apple.
Possible problems with the cursor control panel and solutions to them will be discussed below.
Most laptop owners prefer to use a mouse rather than a built-in touchpad for comfortable work.
The need to disable the touchpad may arise if you have a landline phone, or if you plan to type large amounts of text.
The fact is that when typing, there are often cases when you can accidentally touch the touchpad with your shirt cuff for hours, causing the cursor to move across the text.
In some laptop models, the process of disabling the touchpad is automated, but you have to enable it manually.
Asus: Fn + F 9
D ell: Fn + F 5
Fuj i tsu : Fn + F 4
G i g a byt e : Fn + F 1
L e n o v o : Fn + F 6
Hewlett-Packard (HP)
HP, as well as some other laptop manufacturers, prefer to move away from the standard key layout Fn + Fx and place the touchpad power button directly on the touch panel; it is located in the upper left corner and has a light indication for ease of operation.
To fix the problem, you should go into the laptop BIOS. You can go to the BIOS settings at the boot stage by pressing a specific key on the keyboard.
The name of the key depends on the BIOS manufacturer. Usually these are the keys Del, Esc, F1, F2, F10, etc.
The moment when you should press a key can be determined by the appearance of an inscription with the name of the key to go to BIOS. If you start pressing earlier or later, you will not be able to enter the BIOS.
Touchpad operation is possible if set to “Enabled”, i.e. “Enabled”, if the value is set to “Disabled” - the touchpad is disabled.
Good day, readers.
Some users encounter a situation where the mouse cursor gets stuck on a personal computer or laptop. To fix the problem, you need to find out the reasons why this is happening. And there are a lot of them. In this case, it is necessary to take into account all the nuances, including the device to which the manipulator is connected.
The first ones are usually associated with accompanying software - drivers. In addition, internal system errors and rare conflicts between connected devices affect correct operation. Or it was simply set up incorrectly.
While all of the above can be fixed relatively easily, hardware errors will be more difficult to “cure”. These include the following ailments:
wire damage;
poor or missing power at the connection port;
problems inside the manipulator.
Hardware errors - elimination()
Regardless of the version of the operating system installed on the computer, be it Windows 7 or Windows 10, the first thing you need to pay attention to is the integrity of the device itself. If suddenly external damage is clearly visible on the component being connected, there is a considerable probability that a chip or other contact failure could have occurred inside the board. Unfortunately, in the absence of the appropriate knowledge and necessary equipment, solving the problem will be extremely difficult.
Sometimes the manipulator turns off as a result of failure of the connected cable. If you know exactly where the break is, there is a chance to fix the problem on your own, although it will not be the most aesthetically pleasing. So, you need to disconnect the component and cut out the problematic section of the wire. Then expose the contacts on the two parts of the cord and connect the corresponding cores to each other. After this, it is imperative to cover each individual “twist” with insulating material - usually adhesive tape is used. And after that everything is hidden under shrink film. Although it would, of course, be more convenient to use the same electrical tape.
Personally, I have restored mice from different manufacturers in this way several times. Of course, this cannot guarantee a long “life” of the component in the future. So after such operations it is better to look for a new element. Well, until then you can get by with “ resurrected» manipulator.
In some cases, the computer automatically turns off the power to the USB port to which the mouse is connected. And this situation occurs more often on laptops than on desktop machines. As a result, the element we need does not perform all the prescribed functions. To check the situation in Windows 8 and other operating systems of upcoming versions, you need to perform a number of actions:
It is worth noting that the same method is also suitable for Windows XP.
Software errors - elimination()
It must be said right away that problems of this kind appear more often. The fact is that most modern manipulators are detected automatically by the operating system, which is not always an excellent option, since some gadgets have their own characteristics. Therefore, the standard drivers provided in the system are simply not suitable.
What to do in this case? You need to use the solution that is offered complete with the element. Or look for the necessary software on the official website. This usually helps solve the problem.
If you notice that the cursor on the screen continues to behave strangely, check your system for viruses. In some situations, malware is the problem. After removing it, everything should work normally.
Well, as you can see, there are many reasons why a cursor might not behave the way it used to. To restore full functionality, you must first find out the cause.
I hope you can solve the problems you are having with your mouse.
Hi all! The mouse freezes on the computer, what should I do? I will discuss this question below. The mouse is one of the main components in a computer. Without this device, working on it will be quite problematic. It often happens that a computer mouse stops functioning properly.
The most common “glitch” of a mouse is its freezing. If this happens, there is no need to be nervous and freak out. First you need to find out the cause of the malfunction of the manipulator. This is a rather complicated operation, but in this article I will tell you about everything that needs to be taken into account when repairing your favorite computer mouse.
Before you start repairing your mouse, you need to find out the reason why it is not functioning properly. There are two main types of freezes:
- Hardware;
- Software.
So, if the reason is software errors, then you need to look for problems in the drivers or within the operating system itself. In addition, do not forget about the equipment installed on the computer. Some devices may simply conflict with each other.
As for hardware errors, there are much more of them. Accordingly, fixing them will be a little more difficult than software “lags”.
Now let's look at what hardware errors can lead to slow and freezing operation of your computer:
- First of all, this is a damaged or non-working USB cable;
- If the connection port is not connected;
- Faulty computer mouse;
- Next, you need to remember about the full operation of the USB input. It’s just that some contacts may move away, and accordingly the mouse will work every other time. Until you move the cable or USB jack;
These are the main hardware reasons for the manipulator freezing. If after a step-by-step check the mouse still continues to work incorrectly, then most likely the problem is due to software errors. There may be several of them:
- First you need to check the availability of the necessary drivers. It often happens that the wrong version is installed, or even an old one;
- Next, check your mouse settings. It simply may not be configured correctly;
- Due to the presence of some connected devices, the functionality of the manipulator may be impaired.
VIDEO: MOUSE SETTING - BEGINNING
HARDWARE ERRORS: SOLUTIONS
We have reached the most basic thing - troubleshooting. Before you start accessing the system, make sure that your computer mouse is intact. If it was dropped or hit, it is possible that a contact on a special circuit board inside the device may have come loose. If you don’t have a special soldering machine and the ability to solder, it would be best to leave this mouse or give it to someone who can fix this problem.
One of the common reasons is the breakdown of the cable itself that connects the mouse to the computer. Repairing such a wire will cost you approximately the same price as a new manipulator. Therefore, it’s up to you to decide whether to repair or purchase a new working mouse.
It is also a common error where the computer automatically disconnects from the main USB hub. This is what can render the device inoperative. You can check this by following these instructions:
- You need to open the “Control Panel”. For those who don't know, it's located in the Start menu;
- In the shortcut called “System” you will need to find the “Hardware” tab. Enter this tab;
- Here click on “Device Manager”;
- Visually look for an item called “Universal USB Bus Controller”;
- In this tab, click on “USB hub”;
- Find "Power Management". Click on this item;
- In this tab, you will be able to see the option “Allow turning off the device to save money.” If there is a checkmark next to this item, remove it. The fact is that the computer system can often switch to power saving mode and, accordingly, turn off some devices.
SOFTWARE ERRORS: SOLUTIONS
Although hardware errors do occur, software is much more likely to be to blame for a sluggish computer mouse. Today, a huge number of mice are being created, and almost all of them are automatically detected by the Windows system. However, not all modern gadgets are equipped with the necessary driver and are ready to accept the conditions of a connected mouse. We shouldn’t forget about this either.
It is worth noting that when purchasing expensive manipulators, the kit includes a special disk with the necessary drivers. In addition, they can be downloaded from the official website of the mouse manufacturer. Usually such programs are distributed completely free of charge. After installing these utilities, the mouse can begin to function properly.
If this does not bring you positive results, you need to go to the “Device Manager” menu. If there are errors, some icons may have a question mark or an exclamation mark next to them. You will need to reinstall those drivers that have similar signs next to them.
Now let's talk about customizing the mouse. Many of the users have never encountered this operation before. Now I will tell you in detail and step by step how this is done.
The mouse is an integral part of almost any modern computer system. Without it, it is impossible to perform many actions. And it becomes even more unpleasant if The mouse cursor does not move, but the mouse works. That is, the power indicator is on, the device is connected to the computer, but no response to the user’s actions is observed.
And there may be several reasons for this, as well as solutions. All of them can be divided into:
- software problems;
- hardware problems.
Software problems
First of all, to answer the question, what to do if the mouse does not work, we can advise you to wait a little. It is quite possible that the computer simply froze and stopped responding to commands not only from the mouse, but also from other devices.
If this is not the problem, then you can try the following solutions:
- just restart your computer. You might be surprised how many problems can be solved by simply rebooting your PC;
- It is possible that the mouse drivers have crashed. The natural solution is to reinstall them;
- You also need to see if the mouse is detected by the system itself. To do this, by calling the context menu of the “My Computer” icon, select “Properties”. Then go to the “Device Manager” tab and in the window that opens, find “Mice and other pointing devices.” The user's mouse should be visible here. If it is not there, then you can try to reconnect it and, if necessary, reinstall the driver;
- If the problem occurs in a specific program, it makes sense to see if the mouse is set in the settings of that program.
Hardware problems
If all these problems have been tried by method of elimination, but have not brought any results, then the question: what to do if the mouse freezes on the computer remains open.
And in this case, you need to move on to the so-called “hardware” or hardware problems:
- The connecting cable is damaged. You can try to find and repair the gap;
- there is no contact in the computer port. The corresponding connection socket may have become loose. You can try connecting the mouse to another;
- if the mouse is wireless, then the reason may also be due to the accompanying electromagnetic interference. For example, if there is another wireless mouse nearby, or if a powerful source of electromagnetic radiation is operating nearby. It also makes sense to check if the batteries are dead;
- The reason for the non-working state of both a ball and an optical mouse may be contamination of the working surface of the device itself or the mouse pad (or other working surface). Accordingly, you need to clean the mouse, pad, etc.
Advice: if all else fails, the cause of the breakdown is much more serious, you need to take the device to a service center.
However, it can be much easier to simply buy a new mouse than to repair an old one.
Nowadays almost everyone has a computer or laptop. Agree, it’s quite difficult to imagine your life without this device. And if at home it is primarily a means of entertainment, then at work it is an extremely important tool. To make using desktop PCs and laptops more convenient, a keyboard and mouse were invented. The latter, for some reason, sometimes malfunctions or, to put it simply, freezes. Let's try to figure out what is the cause of this malfunction and how to fix it.
- Breaking.
The first and most obvious thing that comes to mind is a breakdown. Well, this is quite possible. The mouse itself could be broken, the cable (wireless adapter) could be damaged, and you need to understand whether this is really the case. Carefully inspect the manipulator and wire for integrity. If you have another mouse at home, try connecting it.
- Connection port.
It is quite possible that the cause of the malfunction is not in the mouse, but in the connector into which you connect it. If this is a standard (PS/2) port, that is, the only one of its kind on the back panel of your PC, the only solution to the problem is to buy a USB or wireless mouse, the signal source for which, again, is connected to the USB port. If your mouse is already plugged into this port, remove it from one port and insert it into the other. Perhaps that is where the problem lies.
- Pollution.
If your mouse has a ball drive (wheel), turn it over, remove the ball, and clean everything thoroughly. Over a long period of use of the manipulator, a huge amount of dirt, dust, hair and other debris accumulates there. All this, of course, has a negative impact on the operation of the mouse, even to the point of lack of response to user actions.
If you have an optical mouse, you can and should also clean it from time to time. True, the only thing you can do in this case is to clean the small depression where the optics are located. If this doesn't seem like enough, try taking the mouse apart, but only do this if you're confident you can put it back together. Otherwise, first set aside money to buy a new manipulator.
- Computer virus.
Perhaps you just picked up a virus on the Internet, which now seriously loads your operating system, thereby causing the mouse to freeze, and with it everything else happening on the computer. All you can do in this case is to check your PC for viruses and remove them, if any are found, using .
If the mouse freezes only when the system starts, and then goes away, perhaps the reason for this is a large number of programs in the startup menu that start when the OS starts. In fact, you don't need most of them, at least not immediately after turning them on. We suggest you turn off what you do not urgently need. The antivirus, of course, must be left active.
To do this, open " Task Manager» ( Ctrl+ Shift+ Esc) and go to the "" section.
- Weak system, demanding programs.
Perhaps the mouse freezes because your computer cannot cope with the tasks assigned to it. This often happens with older machines when trying to run some demanding program. While the startup process is ongoing, the mouse may well not respond to user actions. The solution to the problem in this case is not the most attractive - either it is necessary to improve the computer by upgrading it, or simply not to burden it with what it cannot handle.
That's all, now you know what to do if the mouse freezes on your computer, as well as all the reasons why this might happen.
In Windows 10, you may experience that the mouse cursor lags or freezes for some reason. In most cases, the problem is caused by some hardware or software that is interfering with the pointing device. What should be done to eliminate this phenomenon?
Before proceeding with solutions, check whether the mouse itself is working. If, after connecting a known working device or from the touchpad on a laptop, the pointer moves smoothly across the screen, then there is a problem with the device. But, if it continues to freeze for seconds, try reinstalling the driver. To do this, follow these steps:
Right-click the Start button to expand the context menu and select Device Manager.
Expand the Mouse and Pointing Devices tab. Place the cursor over the name of the mouse you are using, press Shift + F10 to bring up the menu and select “Delete”.
Restart your computer to allow Windows to automatically reinstall the driver during startup.
If it still lags after rebooting or you have a mouse with additional features, go to the vendor's website and download a driver that is compatible with Windows 10.
Video card driver update
Driver compatibility issues often occur after Windows updates. Go to your graphics card vendor's website and download the latest software.
Check if the pointer freezes after installing them.
If the cursor still lags, set the resolution and refresh rate in the graphics card settings instead of the default Windows 10 settings.
LAN Settings
Sometimes you can get rid of microfreezes and mouse cursor lags after disconnecting the local network.
Open the Run window using the Win + R key combination and type control panel to enter the Control Panel.
Switch the view to large or small icons and go to the Network and Sharing Center section.
In the left panel, click on the “Change adapter settings” button.
Right-click on the local network connection and select Disconnect.
Check how the mouse works. If the cursor does not lag when moving and you are using a laptop, try connecting to the Internet via Wi-Fi. Also, lags can be removed by updating the drivers of the network card, and if it is integrated, then the motherboard.
Changing the Mouse Settings
There may be a glitch in one mouse setting, after which the cursor begins to freeze for several seconds when moving around the screen. Try reinitializing this setting.
Expand the Start menu and click on the gear icon to enter Windows Settings. Go to "Devices" and open "Mouse" in the left pane.
Switch the option “Scroll inactive windows when hovering over them” to the “Off” position.
Click on it again to turn it on. Check whether the cursor then lags when moving around the desktop. Repeat this process several times.
Also, to fix the problem, open the Task Manager and check the CPU, memory and disk load of various applications. If a program overloads one of these resources, it may be causing the cursor to freeze. Try disabling it directly in the Task Manager. To do this, right-click on the problematic application and select “End task”.
What to do if the mouse cursor is glitchy? Below are 10 tips to solve this problem, which is annoying, but not fatal.
1. The right surface for the mouse
The mouse cursor may glitch if the mouse itself is optical, and the surface for it is too transparent/mirror-like. Use a rug, or at least a newspaper or book.
2. Low battery level
This advice applies to wireless mice. Make sure the battery is not low.
3. Special buttons
The keyboard has special buttons for changing the speed of cursor movement, check if they are jammed.
4. Plug into another USB port
Take this into account: this way you can test almost any device that works via USB. What if the problem is not with him at all, but with the computer? Try using it on another PC
5. Test your computer with a different mouse
Similar to the previous advice, the only difference is that here Mohammed is already going to the mountain. Instead of the buggy mouse, insert another, 100% working one. The cursor has stopped slowing down, huh?
6. Eliminate exposure to viruses.
Some malicious programs can hit such seemingly unobvious places as the cursor. Check your computer
7. High temperature, etc.
You know, it's like a person. If your hand hurts, there may be a heart problem. Obviously? Not at all! Same here: problems with the mouse cursor? It’s not that it’s buggy at all, it’s just that the temperature of the video card/other devices is too high. Test her with Everest or Aida.
8. Add speed, change settings
Sometimes increasing the speed of cursor movement helps. Go to the Control Panel - Mouse, in the “Pointer Options” tab, play with the settings.
9. Update your drivers
You should update/reinstall the drivers for both the video card and the mouse itself; there is a high probability that problems with the cursor will disappear. Please note that I don’t mention reinstalling Windows - it’s clumsy.
10. Get rid of dust
Both on the device itself and inside it. If it is not possible to disassemble the mouse, limit yourself to thoroughly cleaning the hole where the red LED lights up. After all, even a small hair can cause cursor glitches.
aswin.ru
Why does the mouse cursor slow down? Main causes and options for their elimination
Hello dear readers.
Often on the Internet you can find users who complain that their mouse cursor is slow. At the same time, problems appear both when working with simple and voluminous applications. It’s worth saying right away that there are many reasons for such symptoms. I will try to present all possible solutions in the article, and of course I will indicate different solutions.
Problems with the mouse (to contents)
As mentioned above, there are many reasons why the pointer on the screen slows down. The first thing to do is check the connected device itself. Or rather, find another device to connect it to the system. If the problems go away, they are in the manipulator himself. If not, in the main equipment or operating system.
If the mouse is wired, you should make sure that the cable has not been kinked. In addition, it is advisable to check the area where it is connected to the board - sometimes it is in this place that a small separation can be observed. This leads to malfunctions.
For wireless mice, it is important to monitor the charge level. Often problems arise precisely because of dead batteries.
There are also often situations when the optical element simply gets filled with dirt or hair from pets. Try to remove everything carefully. It is advisable, of course, in this case to unscrew the device itself and clean it inside. If this does not help, we move on.
Driver(to contents)
A mouse, like any other device connected to a computer, needs a driver. In most cases, the required program is located in the operating system itself. But in some situations it may not be present. Due to the lack of the required driver, the cursor moves jerkily.
The solution is simple - go to the official website of the manipulator manufacturer, download the required file and install it. You just need to choose the right operating system, be it Windows 7 or XP. This rarely happens in new versions.
Operating system(to contents)
When your cursor starts to freeze and get lost, go to the “Task Manager” by pressing “Ctrl+Alt+Del” and look at the “Performance” tab, which is definitely there in Windows 8 and Windows 10. We are interested in the tabs: “CPU” , “Memory”, “Disk”. If suddenly one of them shows close to 100%, this may well be the cause of the problem.
The solution is to unload the operating system. To do this, check “Startup”. Detailed information can be found in this article.
Also, review the apps you are using. Perhaps some of them are not needed for work - turn them off.
Additionally, review the Acceleration and Optimization section. In it you will find a lot of useful information that affects cleaning the system as a whole.
If nothing helps you, it may be time to reinstall the OS.
Video card driver (to contents)
The corresponding element is responsible for the picture on the computer, which also communicates with the system using its own program. And if the necessary drivers are not present, noticeable pauses in the cursor appear when the mouse moves sharply.
Installing suitable software will help, which can be downloaded from the official website. If you don’t know the manufacturer or model, use a program that allows you to find and update all the drivers yourself.
Sometimes the reason why the cursor slows down is poor heat dissipation as a result of contamination of the system unit or laptop. This is especially noticeable in games, for example, tanks and similar online projects. True, most often such problems are accompanied by graphics slowdown. The same thing is often observed in the browser.
Clean and lubricate the active elements.
Wi-Fi module(to contents)
Sometimes the problem may be the Wi-Fi module installed on the computer. It affects the wireless mouse, causing slight interference. Try turning it off. Or replace the mouse.
I hope here you will find the reason and its solution due to which you are having problems with the manipulator. Subscribe and tell your friends about us.
windwix.ru
Why does my wireless mouse slow down?
Wireless mice use a radio communication channel to connect to a computer. To do this, the mouse is equipped with a transmitter and battery, and a small receiving device is connected to the computer’s USB port. Most problems with wireless mice are related to the quality of the wireless communication channel.
A poor-quality communication channel leads to unexpected failures (the cursor freezes and does not respond to mouse button presses), the mouse cursor may twitch or unexpectedly jump across the screen, and temporary freezing of the cursor is also possible.
External radiation sources can affect the quality of the communication channel. These can be electromagnetic radiation devices: microwave ovens, Wi-Fi devices (routers), Wi-Fi modules built into a computer and other wireless devices, a CRT monitor or TV.
Sources of electromagnetic radiation have the greatest impact on cheap wireless mice; they use only one communication channel. More expensive models use several channels, that is, when interference occurs, the device automatically switches to another communication channel, where interference does not affect the quality of communication.
It is worth noting that the influence of other radiation sources largely depends on their location to the computer. The closer to the workplace, for example, a Wi-Fi router is located, the greater the impact it can have on the quality of communication. In this case, care must be taken to ensure that sources of possible radiation are located as far away as possible.
Another important feature of wireless mice is the presence of a rechargeable battery to ensure the operation of the device. Many users very often forget about this, so when the battery charge decreases, you can see the mouse cursor slowing down on the monitor screen. The same applies to using the mouse over long distances. Wireless devices work reliably at distances of up to 15 meters, but in this case, power consumption will most likely increase and the battery will drain faster.
It should also be remembered that regular alkaline batteries provide a 1.5V power supply, while rechargeable batteries only provide a 1.2V power supply. In this case, although the wireless mouse will work longer, its range will be reduced. There can only be one solution to power problems - replacing the battery. In some models, the battery may be built into the mouse and will require disassembly to replace it.
Low power issues can be encountered if you use a USB extension cable to connect the wireless receiver. The longer the cable is used, the less power can be transmitted through it. As a result, this negatively affects the work of the manipulator. Therefore, if it was discovered that the wireless mouse began to slow down, you should install the receiver directly into the USB port of the computer. Read about types of computers.
If the computer is located on a conductive surface, then you may encounter the problem of “shielding” the receiver and computer mouse. In this case, the signal from the mouse simply will not be perceived by the receiver. The way out of this situation is to use insulating pads made of rubber, wood and other dielectric materials; perhaps it’s even time to think about purchasing a mouse pad. Problems with the mouse can also arise due to incorrect drivers. When connecting a mouse to a computer, the system may not find a suitable driver for a given mouse model and will automatically install a driver for a compatible computer mouse. In this case, the functionality and quality of the manipulator may decrease.
You need to download from the official website the appropriate driver for a specific mouse model for the version of the operating system installed on your computer and install it yourself to eliminate possible problems with the software. Also included with the device is a disk with drivers and software, which you should definitely use.
The material describes the main reasons for the slowdown of a wireless mouse, but do not forget about cleaning it regularly. It, like a wired one, can simply become dirty, which is also the reason for its not working properly.
ProComputer.su
5 proven reasons why the mouse freezes on a computer or laptop
The mouse is an integral part of any computer system and since 1981, it has become the main tool for interacting with the operating system.
Therefore, it is not surprising when the mouse on a computer or laptop freezes and does not respond to anything, no matter for how long: it freezes for a second, for a few seconds, periodically or constantly, it is infuriating.
Unfortunately, such a problem exists and practically does not depend on the OS, be it windows xp, windows 7 or windows 10, especially if it is a wireless mouse.
Most often, the mouse cursor slows down and freezes due to its own fault. Why? Because consumers, as a rule, are guided by two criteria - price and wired or wireless.
It is not right. Choosing a mouse is even more important than choosing a keyboard and choosing one is not easy as a huge number of different types, shapes and models have flooded the market.
In this post I will partially touch on the choice, since you may need to buy a new one after reading this guide.
The main part will relate to the topic of the article - why a wireless mouse often or sometimes freezes on a computer or laptop.
What are the differences between computer mice?
There are two main types - optical and laser. Both technologies are very similar. Both use a beam of light that bounces off a surface and informs the computer of the mouse's position.
Laser technology allows for much more precise interaction, making it a popular choice for gamers and other users who need precise cursor targeting.
Laser also allows you to get a higher DPI, which is especially important for gamers.
For the average user, dots per inch above 1000 are more than enough, and there are practically only such models on the market.
The advantage of optical technology is that they are simply cheaper. Even in the case of gaming ones, the models are very similar to each other, differing only in the sensor and greatly in price.
If you want to use your mouse on almost any surface, you should look at one with a laser sensor.
It will also not work on just a sheet of glass or other transparent surfaces, although there are exceptions, for example, the Logitech Performance Mouse MX is equipped with Laser Tracking technology, which allows it to be used on glass (with a thickness of 4 mm above), since the laser is so precise, which can reflect the beam from microscopic imperfections in the glass.
An alternative to optical and laser sensors is provided by Microsoft with BlueTrack technology, using a wide beam of blue light.
It can work on any surface (except glass and mirror surfaces) while ensuring precision. Although it is not the best solution for hardcore gamers, office users will feel the difference in technology.
How I fixed the problem with my wireless mouse constantly freezing
It annoyed me to the point of fury that my mouse constantly began to freeze for several seconds - in the center of the monitor, in the upper left corner, in a word, this happened everywhere - it froze and did not move.
I repeat, it started to freeze, it worked fine before, only I used it on a laptop.
I analyzed the situation, the only thing I noticed a difference in was that when I was connected to the laptop I was next to it, but in the computer the distance increased to at least 1 meter and there were 2 obstacles in the way in the form of the wall of a bedside table and a computer desk.
Then I bought a USB extension cable, as in the picture below, connected the dongle to it and placed it near the mouse.
A miracle happened, the freezes stopped, the nerves calmed down, the work returned to normal, in a word, the mouse froze due to a bad pairing.
The first reason why a computer mouse freezes is a weak sensor.
If you have problems with your computer mouse freezing - it does not always respond to pressing a key, or changing its position, then the first thing you should check is the sensor.
The optical sensor reacts to objects that are sent by a beam of light - that is why the cursor moves and responds, which changes position on the screen.
Keep in mind that it should not be placed directly on glass or slippery surfaces.
In addition, it is worth cleaning the sensor, wheels and keys (you will need to disassemble them) - a can of compressed air and a toothpick are ideal for this.
The second reason why a computer mouse freezes is drivers.
Problems associated with the operation of a computer mouse can also be caused by a driver installed on your computer or laptop.
To remove and reinstall the pointing device driver, open Device Manager and look for the Mouse and Other Pointing Devices section.
Then select the HID-compatible mouse, and RMB select the "Uninstall" option. After this procedure, restart your computer - the system will automatically install the default driver.
The third reason why a computer mouse freezes is USB ports.
USB ports connected to the motherboard can also cause the problem. If you have not yet been able to solve the problem of your computer mouse freezing, you should check whether the device is damaged.
The easiest thing would be to connect the mouse to another computer. This way you can be sure that the problem is not with the device, but the cause should be looked for in the computer.
In addition, you can test your computer mouse in Safe Mode - to do this, at startup, press the F8 key and select the Safe Mode menu item.
If it turns out that the mouse works properly in Safe Mode, then the reason is likely to lie in the system settings.
If the mouse is connected to the front USB port of your computer, try connecting it to the rear USB port. That's all. Good luck.
vsesam.org
Why does the mouse cursor freeze?
While working on your computer, you may experience problems such as the mouse cursor freezing, shaking, or disappearing. This can be explained by the fact that the device itself is faulty or there are software failures.
If the mouse cursor freezes, the first thing that comes to mind is to check whether the device wire is properly inserted into the computer connector. It is possible that the USB port to which the mouse is connected is faulty, so you need to try inserting the plug into a different connector. To make sure that the device itself is faulty, you need to take another mouse and check how the cursor moves when working with it.
It often happens that the mouse cursor disappears when foreign objects, pet hair, or dust get into the optical connector. If they cannot be removed completely, the mouse must be disassembled and cleaned. To do this, you need to unscrew just one screw and remove the top cover. All dirt inside should be removed, especially in the area where the beam hits.
If the mouse is wireless, you need to make sure that its batteries are not dead and check the signal strength. Signals from other devices connected via USB ports may interfere with the pointer's operation. In this case, the mouse cursor either freezes, not reacting to movements, or periodically disappears and appears. In this case, you should connect devices, such as a USB modem and a mouse, from different sides of the computer. It is recommended to keep mobile phones away from a running PC.
If the mouse cursor slows down, this does not mean that the device itself is faulty. Perhaps you just need to increase the pointer speed. To do this, you need to go to “Control Panel” through “Start” and open the settings tab in the mouse settings. Here you can change the cursor speed to your liking, but be sure to save the settings.
The mouse cursor may freeze due to viruses damaging system files. In this case, you need to remove the USB driver through the “Control Panel” in the “Add or Remove Programs” section and install it again. You can find a USB driver on the Internet or download it from the disk that is sold with the mouse. After reinstallation, you need to restart your computer and check the operation of the device.
The mouse cursor may disappear or become unresponsive while using the browser. If this only happens in the browser, then first you need to try reinstalling it. 
If nothing has changed, then most likely the problem is with the Adobe Flash Player plugin, so it is suggested to replace the old version with a more recent one. In addition, you can disable plugins in your browser settings, but then you won’t be able to see flash images on websites.
It happens that the mouse cursor freezes when there are a lot of processes running on the computer, which greatly loads the memory and processor. In this case, it is recommended to disable unnecessary processes and remove them from automatic startup.
Sometimes the problem of cursor drawing can be solved by reinstalling the video card drivers, replacing them with newer versions.
In some cases, cursor freezing may be due to the use of animated pointers. To get rid of the problem, you need to select the standard cursor view.
Answers:
Muhomedianov:
There were similar problems with mice connected to USB, after using an adapter to PS/2 the problem was solved. Even after pulling the tail out of the USB, performance was usually restored. Windows found the device again.
TU-154:
There may actually be a problem with the mouse or its cable. Try another mouse that is known to work.
Basil:
Test the mouse on another computer (or another mouse on this one). The wire at the base of the mouse may have frayed.
Jonya:
I had the same thing. See if the mouse is in the list of devices. And then I poked my head in, and it turned out that I didn’t have a mouse on my computer at all. Disconnect and connect again, reinstall the driver.
Alex:
I went into the properties of the mouse and removed the checkbox in the property: \"Enable increased pointer precision\" - the freezes disappeared.
MBM:
For me it also freezes for 5-15 seconds approximately every minute, sometimes two, and then comes back. It's been like this for 2 months already! I have a DELL notebook. There is a touchpad and a USB mouse. I tried everything: changed mice, bought new ones, the simplest and the most complex ones, disabled and enabled the touchpad, set all parameters to Default, disabled and enabled all possible options, reinstalled drivers, stopped hot key options in all programs, re-read all English-language sites on this topic - tips: check your mouse. Can any of the Russians understand more?
Vipart:
If you are experiencing various problems with your mouse, it is possible that your computer is automatically turning off power to the USB root hub. 1. Open “Control Panel” > “System” > “Hardware” tab, and click on the “Device Manager” button. 2. In the "Device Manager", find the object or objects called "Universal Serial Bus Controllers", open them, and double-click on the first item called "USB Root Hub". 3. In the properties dialog that appears, go to the “Power Management” tab. 4. The “Allow the computer to turn off this device to save power” checkbox is selected by default. Uncheck the box and click OK.
Loading...
