We configure "Taxi" for ourselves in 4 steps (1C: Accounting 8.3, edition 3.0)

2016-12-07T18:49:42+00:00

In this article I will talk about how to make working in the new 1C: Accounting 8.3 “Taxi” interface truly convenient and comfortable for an accountant.

Follow just 4 steps to set up the Taxi interface for yourself and enjoy all its benefits. If you are still in doubt: to switch or not to switch, then my opinion is unequivocal - to switch. Taxi is better. Taxi is more convenient. And it’s very easy to adapt to it.

If the "Taxi" interface is not yet enabled, enable it:

Select the “Taxi” option and click the “Restart” button:

Then Necessarily go to the “Administration” section, “Interface” item:

And we also set the “Taxi” option here and press the “Restart” button again:

Step #2. Setting up the section panel.

Here, on the right side of the window, select sections that we rarely use or don’t use at all and click the delete button:

Most often, such “unloved” sections are “Manager”, “Production” and “OS and Intangible Materials”:

And finally, in the lower left part of the window, set to show “Picture and text”, if it’s easier for you to find sections with pictures:

Click OK and the section panel will change:

Result: All that was left was what was needed, pictures appeared.

Step #3. Setting up the open windows panel

In the new interface, you can't switch between open windows because the open windows panel is hidden by default. Let's display it.

After dragging, click OK and now the windows we open will be displayed at the bottom of the main 1C window:

Result: at the bottom of the main window, directories, documents, magazines, etc. that we open are displayed.

Step #4. Turn on the "All functions" menu.

A very useful feature when you tried to find some report or document, but could not do it through the sections panel. In this case, the “All functions” menu will help you out, from which you can open all reports, documents, reference books, etc.

This option is hidden by default, but is easy to display.

Check the box "Show All Functions" and click OK. Now any report, document, reference book, journal or processing can also be selected like this:

Result: it became possible to open reports, documents, journals, directories and processing that could not be found in the main menu of the system.

We're great, that's all

By the way, for new lessons...

Sincerely, Vladimir Milkin(teacher

The article continues the series “First steps in 1C development.” In it we will look at the new Taxi interface from both the user and programmer sides.

Applicability

The article discusses the “Taxi” interface of the configuration developed on the 1C 8.3.4.465 platform. The information is relevant for current platform releases.

New Taxi interface in 1C:Enterprise 8.3

In addition to the already familiar interface options “in separate windows” and “in bookmarks”, a new interface has appeared in the 1C:Enterprise 8.3 platform - Taxi.

When creating a new user interface, the platform developers set themselves a number of tasks.

Since it is now possible to work with configurations via the Internet using a regular web browser, the platform’s orientation towards working with mobile devices and entering information using a touch screen that responds to touches is noticeable.

The new interface has distinctive visual features - large sizes of controls, large font, significant spaces (indents) between elements, the color scheme has changed, activated controls are highlighted in color, etc.

In addition to making the user interface more user-friendly and convenient, much attention was paid to the application focus, making it easier to carry out daily operations.

Users received improved navigation capabilities throughout the application, a customizable workspace, work with history similar to the history of a web browser, and expanded selection options in input fields.

Let's take a closer look at the new Taxi interface.

When using the Taxi interface, the application is the main window, within the work area of ​​which all other windows open.

Windows are not displayed separately on the Windows taskbar, even if they are visually drawn on top of the main window (for example, a form for selecting a directory item).

The work starts from the initial page. This page cannot be closed. The most frequently used configuration forms should be located on it.

To enlarge, click on the image.

It is possible to customize the forms displayed on the home page in user mode. To do this, select the item in the main menu View– Setting up the home page.

The main application window consists of several panels and areas, each of which has its own functional purpose.

Using the key F6 You can switch focus between forms located on the home page.

The main application window consists of several panels and areas, each of which has its own functional purpose. The relative position of the panels can be configured by the developer in the configurator and by the user when working with the configuration.

1. Section panel

The Sections panel displays a list of top-level configuration subsystems.

Each section is designed as a separate button (bookmark). The section with the title Main is always displayed first on the left.

To enlarge, click on the image.

If the screen width is not enough to display all sections, a scroll button appears on the panel (in the form of an arrow):

To enlarge, click on the image.

When you click on a specific section in the function panel of the current section, we will see the commands of the selected section.

To enlarge, click on the image.

When you click the mouse again, a list of all commands in the selected section opens on the screen - the function menu.

To enlarge, click on the image.

2. Function panel of the current section

To enlarge, click on the image.

It displays the commands of the section selected by the user. When you click on the hyperlink, the corresponding command will be executed (for example, opening the document list form “Receipt of goods”).

3. System command area

On the left side of the area there is an access icon to the main menu containing the classic items File, Edit, View, etc. You can activate the main menu from the keyboard by pressing the F10 button.

On the right side of the area there are commands for saving to a file, printing, previewing, working with links, calculator, calendar, etc.

4. Toolbar

This panel contains buttons for opening the function menu of the current section, accessing favorites, viewing history, and searching for data.

Using the buttons on this panel you can speed up and simplify navigation through the configuration.

5. Panel open

To enlarge, click on the image.

This panel displays a list of currently open windows. Home page workspace forms do not appear as separate forms in the open pane.

6. History panel

In the Taxi interface, the history panel is close to the history of the web browser.

The history panel speeds up access to recently used objects - open, edited or added reference books, documents, etc.

The entries are divided by day, and the time of use is indicated opposite each line. Within one day, records are ordered by access time.

No more than 400 history entries are stored for a user. If the number of saved items is 400, then when new history items are added, old entries are deleted.

There is a search bar for history. By clicking on history lines, you can also switch between open application windows.

7. Favorites panel

The favorites bar is also “borrowed” from the web browser. Navigation links that the user has specifically marked as being used for quick access are saved here.

Now not only data, but also commands are stored in favorites.

You can add an item to your favorites by clicking on the star icon.

To enlarge, click on the image.

The favorites bar also has a search bar. The titles of items located in favorites can be edited.

There is a small button with a pencil on the right side of the favorites line for this purpose.

The platform implements a special form of full-text search. This form is only available if full text search is enabled.

To enlarge, click on the image.

You can call the search form from the keyboard using the keyboard shortcut Ctrl + Shift + F.

An information panel may exist at the bottom of the main application window.

It is designed to display performance indicators and indicate that the mode for simulating delays in server calls is enabled.

Now performance indicators are displayed not as a separate window, but as a separate panel of the main application window.

The panel is displayed if the “Display performance metrics” flag is set in the system parameters:

The message box is now located at the bottom of the form and is only visible when there are messages to display.

To enlarge, click on the image.

For form fields that have the form “checkbox field” and “selector field”, the ability to display them in the form of a toggle switch has been implemented (several buttons located next to each other, the current value is highlighted in color).

Another innovation in the Taxi interface is collapsible groups, which allow you to save space on the screen, receive primary information first, and only if you need to clarify something, expand the group, detailing the information.

Collapse is available for a regular group with a display title.

The Taxi interface uses larger fonts and sizes of control elements, and there are wide spaces between elements.

Forms designed for a regular managed interface will not look very convenient when switching to Taxi. Therefore, the VariantScale form property was implemented.

The work option of using the Compact scale option is a temporary solution that allows you to transfer the configuration to the new interface. And then modify large complex forms for the new interface.

With this option, a smaller font and indents are used, the form looks as close as possible to the one developed for the 8.2 platform.

The configuration designer can determine the layout of the panels. The editor can be opened by right-clicking on the root element in the configuration tree and selecting “Open client application interface” in the context menu that opens.

On the right side of the window there is a list of all panels present in the interface. Using the mouse or the Add button on the left side of the window, you can determine the relative position of the panels on the screen.

Each panel can appear in the tree only once. The editor does not allow you to add two identical panels to the tree. Panels already placed in the interface are marked in the right corner in the list of standard panels with an icon in the form of a gray square.

To enlarge, click on the image.

In the Taxi interface in user mode, you can configure the arrangement of panels on the screen. The Panel Editor is designed for this, which can be opened from the main menu View – Panel Settings.

Using the mouse, the user can move the icons corresponding to the sections, arranging them in the rows and columns of the panel editor so that the panels are visible in the desired parts of the screen.

To prevent a certain section from being displayed in the interface, you need to move it to the bottom in a field with a gray background.

If the user has a small monitor, then to save useful screen space, you can hide the display of all panels.

For this purpose, the main menu item View – Hide all panels is intended.

At the top of the forms, navigation buttons between open windows are displayed. In the appearance of these buttons we again see similarities with a web browser.

To enlarge, click on the image.

To return to the home page, press the Home button. To move between active forms, use the Back-Forward buttons.

In the Taxi interface, the navigation bar for the form is now located at the top, and not on the left, as it was before.

To enlarge, click on the image.

On platform 8.3, unlike platform 8.2, in the properties of the root configuration element, instead of the item “Open the desktop command interface” there is “Open the command interface of the main section”, and instead of the item “Open the desktop work area” there is “Open the start page work area”.

The appearance of the calendar has been changed. It implements separate lists in which you can select the year and month.

You can also move to the next and previous month using the left and right arrow buttons, as before.

The root configuration element has the “Interface Compatibility Mode” property:

• Version 8.2 – the client application runs in the 8.2 interface. Switching to the Taxi interface is not possible.
• Version 8.2. Allow Taxi – interface version 8.2 is used by default. It is possible to switch to the Taxi interface using the options dialog or the command line.
• Taxi. Allow Version 8.2 – the Taxi interface is used by default. It is possible to switch to the version 8.2 interface using the options dialog or the command line.
• Taxi – the client application runs in the Taxi interface. Switching to 8.2 interface mode is not possible.

When using the 8.2 interface, it is possible to switch between the interface in separate windows and the interface in tabs.

In conclusion, we will answer the main question about what advantages the use of the new Taxi interface provides. Perhaps the most important advantage is that working with the program has become much more convenient. The following points contributed to this:

• Modern app design
• Large font
• Wide range of possibilities for the user to customize their workspace
• Ease of navigation through the application when using the auxiliary panels Favorites, History, etc.
• Improved ergonomics of some interface elements
• Ability to create new directory items directly in the selection list.

For those who want to deepen their knowledge of the innovations of managed forms in the new Taxi interface, definitely

This is the second part of the article about setting up the Taxi interface that appeared in the 1C:Enterprise 8.3 application. In I talked about how to add new panels to the interface and change their layout according to your preferences. In the second part, I will teach you how to manage sections of the application and their content, as well as change the parameters of the initial interface page.

In the screenshot below, the interface looks like how we made it look in the last lesson. For me, this working view is not very convenient. I prefer the section bar to be on the left, as it is by default. And it's not just a matter of habit. It’s just that when all the sections are compactly collected on one side, they can all be covered at one glance, which cannot be said about the extended menu at the top of the interface.

But since the side menu takes up too much space in the screenshots, I will leave the sections in the place where we moved them. Although I recommend that you leave this menu where the developers themselves placed it.

Here and below, screenshots created using “1C: Salary and HR Management 3.0” are used, but, as I said in the previous article, these settings are relevant for all new configurations, since the “Taxi” interface is used in them too.

So, the next feature I want to tell you about is customizing section panels. It allows you to remove individual sections from the interface.

Here the question may arise as to why someone might want to remove entire sections of operations from a program. In fact, everything is very simple. Let's say you have a small company in which only one employee is responsible for personnel and salaries. Of course, in this case, nothing can be deleted, since from time to time he will use all available tools.

But let's assume that you have a human resources specialist on staff who keeps personnel records and a payroll accountant. A personnel officer does not need payroll calculations, just as an accountant does not need personnel operations. Therefore, each of these specialists can be left with only those sections that they really need, so that unnecessary elements do not distract your employees from their work.

Of course, some objects are used by both personnel officers and accountants within the scope of their powers. For example, sick leaves or vacations. But, as a rule, access to such objects is duplicated in the corresponding sections.

To delete or add a previously deleted section, you need to select the “Customize section panel” function in the “View” settings subsection.

In the window that opens, it is easy to remove any elements from the interface and return them back. This can be done in several ways.

First, you can use the "Add", "Add All", "Delete" and "Delete All" buttons. If you do not use a button that removes or adds all possible objects, the action will affect only the selected objects.

In order to select several consecutive menu items, you need to select the top one with the mouse, and then, holding Shift, click on the bottom object of the selected group.

In order to select several objects in random order, you need to mark them with the mouse while holding the Ctrl key.

Secondly, you can add or remove objects by simply dragging the mouse.

But the third method is closer to me. Following it, you just need to double-click on the desired object. If it is located among the available objects, it will immediately become selected, otherwise it will be moved from selected to available.

At the top right you see two blue arrows. They are needed to change the order of elements in the menu.

Now, using the knowledge we have gained, let’s remove the “Salary”, “Payments” and “Taxes and Contributions” items from the section panel, and raise the “Administration” section to the top of the list of selected sections.

Now let's accept the changes and see what form our menu has taken.

Everything turned out just as we planned. To quickly return everything back, you need to go back to the section panel settings, click the “More” button, select the “Set standard settings” option and accept the changes.

It is no coincidence that I spent so much time describing these actions, since they are widely used in all 1C:Enterprise 8.3 configurations and we will need them in the following examples.

The next thing I want to tell you about is setting up the home page. Now it displays an invitation to configure the system from scratch or transfer data from other configurations, but in the future, when the program is configured, other data will be displayed there. For example, if we talk about the “1C: Salary and HR Management 3.0” configuration, then this could be the staffing table and the history of accruals.

To manage the home page settings, you need to go to “View”, “Start Page Settings”.

As you can see, everything here is the same as in the section panel settings. The only difference is that the initial page also has a second column that can be activated by adding some of the available forms there. But you should only do this if you have a large enough display. Otherwise, the second column will only get in the way, eating away at the workspace.

You can experiment with customizing the Start screen yourself. You can return everything to the default settings in the same way as we did after setting up the section panel.

The workspace of each section is divided into a navigation panel and an action panel. Visually, they do not differ from each other, so for clarity, I marked the navigation bar in the next screenshot with a red outline.

Through the navigation panel, the user has access to lists of reports, documents, and so on. And using the action panel, he can immediately create a document, a report, and the same “so on.”

For clarity, let’s look again at the previous screenshot illustrating the “Salary” section. As you can see, in the navigation bar, which I surrounded with a red frame, there is a section “Sick Leaves”. If you click on it, a list of all sick leaves will open, which is currently empty. Here you can create a new sick leave by clicking the “Create” button.

But in the same “Salary” section, in the action menu, there is also the “Sick Leave” item, located under the eloquent heading “Create”. By selecting it, you will create exactly the same sick leave as in the previous example, but for this you will not have to go to their general list and click an additional button.

The content of the navigation and action bars can also be controlled. So if you are sure that a feature should be in a certain section, but it is not there, it may simply not have been added to the list. You can do this yourself using the Customize Navigation and Customize Actions features. This is done in the same way as the settings for sections and the home screen.

Look how this same section looked after I enabled all the features available for it.

It's just some kind of porridge, isn't it? All the actions do not fit on the screen, even if you expand it, and you have to use the scroll bar to see them all. Therefore, it is advisable to activate in the action menu only those functions that are really needed quite often. Those documents that you need much less often are better created by navigating to them through the navigation bar, and not including them in the action bar.

Here it would be useful to recall that access to any “1C:Enterprise 8.3” object in the “Taxi” interface can be obtained through the “All functions” option, which I wrote about in the first part of the article.

In the upper right corner of the Taxi interface there is a panel with buttons that duplicate some of the application’s functions. You can choose which buttons will be displayed in this panel. To do this, you need to use the “Add or remove buttons” function and tick those that you need most often, as shown in the screenshot below.

This concludes the article about customizing the “Taxi” interface. Next time I will tell you how to get started in the 1C: Salaries and Enterprise Management 3.0 configuration.

The information that the user can display on his home page is configured by the developer:

Any managed form can be added to the work area of ​​the home page:

Question 10.12 of exam 1C: Platform Professional. How is the home page working area determined?

1. Filled out with automatically generated forms based on standard commands
2. Typed from a list of common forms
3. Typed from a list of arbitrary forms
4. Typed from the list of basic forms
5. Typed from the list of any forms defined in the configurator
6. Typed from a list of managed forms

The correct answer is number six, see the post.

Question 10.13 of exam 1C: Platform Professional. You can place forms on the desktop area:

1. Horizontally in any quantity, vertically in any quantity
2. Horizontally no more than two, vertically no more than two
3. No more than two horizontally, any number vertically
4. Horizontally in any quantity, vertically no more than two

The correct answer is the third - you can make one or two columns, and each of them has an arbitrary number of forms.

Question 10.14 of exam 1C: Platform Professional. You can display the start page:

1. In the main window
2. In the auxiliary window, hold down the "Shift" key
3. Depends on configuration settings
4. Options 1 and 2 are correct

The correct answer is the first one. The start page can only be in the main window.

Question 10.19 of exam 1C: Platform Professional. A navigation bar can exist:

1. Only in the main window on the desktop
2. In the main window on the desktop and in sections
3. In the main window and auxiliary windows

The correct answer is third. The navigation panel is part of the form's command interface, and the form, in turn, can be opened in the main or in an auxiliary (pop-up) window.

Question 10.91 of exam 1C: Platform Professional. Interface panels can be located on the screen:

1. Only at the top
2. Only downstairs
3. Left only
4. Right only
5. Top, bottom, left, right

Question 10.124 of exam 1C: Platform Professional. Where in 1C:Enterprise mode are you able to configure the appearance of the interface?

1. In the home page settings dialog
2. In the panel settings dialog
3. In the options dialog
4. In the "All functions" menu

Question 10.127 of exam 1C: Platform Professional. What do you need to open to configure panels in the configuration?

1. Configuration command interface
2. Home page work area
3. Main section command interface
4. Client application interface

The correct answer is number four - panels are configured in Enterprise mode.

Setting up the Taxi interface

Setting up the Taxi interface in 1C: Accounting 8 edition 3.0

The materials of the article are current as of 08/20/2014.

Reproduction of the article is permitted with the author indicated and a link to the source.

Starting with version 3.0.33, the 1C: Accounting 8 program began to be supplied with two interfaces. The new interface is called “Taxi”. It is this that the developers recommend using when working with the program now, since in a few months the old interface will be removed from the program and only Taxi will remain.

But not all users liked Taxi at first after switching from version 2.0 and having received answers to the question: “What exactly do they not like?”, we can conclude that what they don’t like is basically simply not configured by the user.

This article discusses the main options for customizing the Taxi interface in 1C: Accounting 8 edition 3.0 in user mode.

When we launch the standard configuration of 1C:Accounting 8 edition 3.0, we open:

system command area (top)

toolbar (top left)

section panel (left)

the initial page (in which we see the Accountant’s Task List, Manager’s Monitor, a field for full-text search and links to go to reference information on various 1C company sites) (Fig. 1).

A window will periodically appear in the lower right corner with a recommendation to set up a backup; by clicking on it, you can go to the backup settings section. Please note that the backup settings are individual for each user, i.e. Having configured backup for one user, this window will still appear for other users until each of them enters the settings and unchecks the “Perform automatic backups” checkbox. If each user configures the "On shutdown" backup, then when they exit the program to create a backup, other users will be blocked from working while the backup is being created, which may create some inconvenience for other users, so I recommend that someone configure the backup - one of the users.

I will not dwell on setting up the “System command area”, since it is the same as in the Interface in the previous version of 1C: Accounting 8.

Many users who switched to the Taxi interface find it inconvenient because the Section Panel is on the left, not on the top (this was more common) and that the Taxi interface does not have the ability to display windows in Bookmarks so that they can return to a previously opened form.

Both of these inconveniences can be solved to some extent by adjusting the location of the panels.

To do this, turn to Menu - View - Panel Settings (Fig. 2).

Here you can configure by dragging areas which panels you want to see and where to place them. For example, we will place the Section Panel and the Toolbar at the top, and at the bottom we will place the Open Panel (Fig. 3). It is the Open Panel that will replace the bookmarks we are used to.

As a result, we will get a more familiar and, in my opinion, more convenient view of the program (Fig. 4).

Depending on the size of your monitor, you can position the Function Panel of the current section either on the left (Fig. 5) or on top under the Section Panel.

Or you can not display it at all, since the Taxi interface provides another option for accessing the Function Panel commands (in my opinion, more convenient) - this is by clicking on the Function Panel element, since in this case we will see all the available commands.

If, when placing the Panel of open windows at the bottom, we open many windows, then the inscriptions in the bookmarks become unreadable (Fig. 6).

Therefore, with wide-format monitors, some may find it more convenient to place these bookmarks on the right (Fig. 7).

You can also add visibility to the Favorites Panel and the History Panel, but in order not to load the monitor to the detriment of the workspace, I do not do this, and if necessary, you can use the buttons on the Toolbar to access these services (Fig. 8).

You cannot go to the Section Panel settings using the right mouse button as was the case in the previous interface. It is configured through Menu - View - Settings section panel (Fig. 10).

You can remove sections you don’t need, change the order in which they are displayed, and also select a display option (text, picture or picture and text) (Fig. 11).

To change the composition of the Function Panel of the current section, you need to click on the corresponding section of the Section Panel and select Navigation Settings, where you can add or remove the visibility of certain commands, as well as change the order in which these commands are displayed. Moving a command to the Important submenu means that the command will appear at the top of the list and in bold.

At the initial stage of getting used to the new interface, as well as after each update, I recommend adding all commands to the selected commands field. This way you will be able to find rarely used commands faster, so that you don’t get the impression that some commands are missing (Fig. 12).

To restore the default settings of commands that, according to developers, are used most often, you can use the More button - Set default settings (Fig. 13).

But even with setting the visibility of all available commands in all sections, you may encounter a situation where you cannot find the command you need.

And then the All functions command will help you. Unfortunately, by default this command is not visible. In order for it to appear, you need to go to Menu - Tools - Options - check the box “Display the command “All functions”” and then it will appear in the menu.

By calling All functions you will see a tree of all program objects from which you can find and open any reference book, document, report or processing (Fig. 14).

If you have a gray bar at the very bottom on which red inscriptions periodically appear with some current and accumulated calls and they bother you, then this performance panel can also be removed through Menu - Tools - Options - Display performance panel.

The Favorites Panel has been developed in the Taxi interface.

You can add any section, list, database object, report or processing, and even a command to this panel.

For example, we often look at:

Bank statements,

documents for the sale of goods and services,

SALT and SALT reports on the account

deleting marked objects.

Let's add these elements to Favorites and in the future, to open the Bank Statements or SALT journal, just open the Favorites panel and click this command (Fig. 15).

To add an element to the Favorites Panel, you need to click on the star that appears to the left of the element when you hover over it with the mouse.

Elements in the Favorites list can be moved by simply dragging, you can rename them, and we can mark the most significant elements for us as “important” and they are highlighted and displayed at the beginning of the list.

You can also mark even a specific document in the favorites panel (for example, so as not to look for it tomorrow if you still need to work with it) or, for example, if we often look at dollar rates, we can quickly access the dollar element from the Currencies directory.

With a widescreen monitor, the Favorites panel can be pinned on the screen and then the most frequently used commands will always be visible (Fig. 16).

There is also a History panel, which stores information about the last opened documents and directories, indicating the date and time of opening of these documents, through which you can also go to previously opened documents and directories (Fig. 17).

In total, no more than 200 lines are stored in the history. The History panel can also be docked in an area of ​​the screen.

Well, the last thing we will configure from the appearance of our interface is setting up the Start page.

It is configured through Menu - View - Home page settings (Fig. 18).

For example, you can remove the Desktop and the Information Center and place, for example, the Transaction Journal or the Bank Statements journal. Or if the manager is engaged, for example, only in issuing documents to customers, then you can place a journal of customers’ documents on the home page.

Often, users who have switched to the Taxi interface complain that the document forms do not have convenient buttons with texts, there are no buttons, for example, copy, edit, mark for deletion, and so on.

All these commands, of course, exist and you can see them by clicking on the More button. Some commands are also available from the right-click context menu.

But in Taxi you can configure which buttons, in what sequence and in what form you want to see them on the form screen.

To do this, click the More button and select Change form (Fig. 19).

Here you can specify which buttons should always be visible (to do this, you need to click on the command of this button and set the “Only in More” element property to No. The buttons will appear in the command panel.

Also, if you are already accustomed to icons, then in order to fit more buttons you can set the display of the “Picture” buttons. (although not all buttons have pictures).

After that, you can arrange the buttons in the order that is most convenient for you, using the arrows or simply dragging them with the mouse.

As a result, you can get, for example, this type of document Sales of goods and services:

Please note that documents with tabular parts have 2 More buttons. One is common for commands related to the entire document and the second is for commands related to the tabular part of the document.

Setting up the form, including the tabular part, is located in the More button, which applies to the commands of the entire document as a whole.

In the same way, you can customize the view of the document journal by changing the displayed columns of the list.

If you want, you can even change the date format if you don't like the time being shown after the date (but I don't recommend doing that).

Well, if you are already an experienced user, then to save space you can disable information links - tips at the bottom of the forms.

Well, if during the setup process you did something wrong and now you don’t know how to fix it, then you can always return to the standard settings.

Return is located in the More button of Form Settings (Fig. 21).

In addition to command buttons, forms can have their own navigation bars, which you can also customize as you see fit (Fig. 22).

This can be done through the View Menu - Setting the Form Navigation Panel (Fig. 23).

With the development of the platform and configuration, new possibilities for customizing the user interface will appear without the participation of programmers. I will try to keep you updated on the most interesting changes.

I wish you success,

Sergey Golubev