In this article, we will look at setting up the D-Link DIR-300 router using the NetByNet provider as an example... Manual for setting up the D-Link DIR-300 router.
1. Authorization
2. Changing the factory password
3. Setting up Wi-Fi on the router
4. Setting up an Internet connection
5. Setting up the router in AP mode
6. Setup in router mode
7. Configuring PPPoE while automatically obtaining a local IP address (DHCP)
8. Configuring PPPoE with a static local IP address
9. Configuring PPtP (VPN) while automatically obtaining a local IP address (DHCP)
10. Configuring PPtP (VPN) with a static local IP address
11. NAT when automatically obtaining an IP address (DHCP)
12. NAT with a static IP address
13. Checking connection status
14. Saving/restoring settings
Resetting the router settings is done by pressing and holding the Reset button on the back panel of the router.
For ease of remote configuration, use the DIR-330 online emulator
(interfaces are similar)- http://support.dlink.com/Emulators/dir330/112/index.html
In order to get to the router’s web interface, you need to open your Internet browser and type in the address bar http://192.168.0.1, User Name admin , Password - leave blank (provided that the router has factory settings and its IP has not changed).
Changing the factory password.
Default: Login admin, password empty.
Courier installers must change the password in the settings to the Serial Number indicated on the box (S/N). When reconfiguring, it is also recommended to use S/N (serial number) as a password for the router and wi-fi.
In the router interface, you need to go to the MAINTENANCE tab, Device Administration menu.
In field New Password Enter a new password.
In field Cofirm Password repeat new password.
Then click the button Save Settings.
After this, the router will prompt you to re-enter its settings.
Setting up Wi-Fi on the router.
In the router interface, you need to go to the SETUP tab, Wireless Setup menu. Manual Wireless Connection Setup button.
1. In section "WI-FI PROTECTED SETUP" It is better to uncheck the Enable item, since not all wireless adapters support Wi-Fi Protected Setup technology.\”
2. Specify the identifier (SSID) of your wireless home network (NETBYNET-980-25-00) in field "Wireless Network Name"(default dlink).
3. Select a wireless channel, any channel from the drop-down list "Wireless Channel".
4. Select the wireless network security mode.
5. In the dropdown list "Security Mode" choose "Enable WPA/WPA2 Wireless Security (enhanced)" is the most secure way to protect your wireless network.
6. "Cipher Type > TKIP".
7. "PSK/EAP > PSK".
8. In the field "Network key" You must enter any set of numbers from 8 to 63. They are also must be remembered so that you can specify them when connecting to the network. It is recommended to use the device serial number as a key (indicated on the box as S/N ########).
9. Click on the button "Save Settings" to apply and save the settings.
Setting up an Internet connection.
Press the button Manual Internet Connection Setup
Setting up a router in Access Point mode.
Bridge mode (English bridge). in this case, to access the network, you will need to set up an Internet connection on your computer.
Before switching the router to Access Point Mode, be sure to configure the router settings (wi-fi, etc.). After changing the mode, control is impossible.
To change the mode, you need to check the Enable Access Point Mode checkbox in Access Point Mode. Then click the Save Settings button.
Manuals for setting up a connection on a computer - http://help.netbynet.ru/
Setting up in router mode.
Configuring PPPoE while automatically obtaining a local IP address (DHCP).
Russian PPPoE (Dual Access)
2. User Name: Your login from the contract
3. Password: Your password from the agreement
4. Confirm Password: repeat password
5. Press the button Clone MAC Address
6. Connect mode select \"Always\" for permanent connection.
7. Save the settings with the button Save Settings and wait until the router reboots.
Configuring PPPoE with a static local IP address.
1. My Internet Connection is: Russian PPPoE (Dual Access)
2. User Name: Your login from the contract
3. Password: Your password from the agreement
4. Confirm Password: repeat password
5. Press the button Clone MAC Address
6. Connect mode select- connection setup mode \"Always\" for permanent connection.
7. Select an item Static IP
1. IP Address
2. Subnet Mask- provider subnet mask.
3. Gateway- provider gateway.
4. Primary DNS Address (212.1.224.6)
.
5. Secondary DNS Address (212.1.230.111)
.
Save settings by pressing a key Save Settings.
Configuring PPtP (VPN) while automatically obtaining a local IP address (DHCP).
In field My Internet Connection is: select Russia PPTP Dual Access.
1. Select a connection with dynamic address assignment by your ISP Dynamic IP.
2. Press the button Clone MAC Address.
3. Server IP/Name- IP/Server name of the provider.
4. PPTP Account
5. PPTP Password PPTP Retype Password
6. Meaning MTU - 1372
7. Connect mode select \"Always\" Save Settings.
Setting up PPtP (VPN) with a static local IP address.
In field My Internet Connection is: select Russia PPTP Dual Access.
1. Select a connection with static address assignment by your ISP Static IP.
2. IP Address- IP Address issued to you by your provider.
3. Subnet Mask- provider subnet mask.
4. Gateway- provider gateway.
5. DNS- DNS Server provider (212.1.224.6)
.
6. MAC Address- press the button Clone MAC Address.
7. Server IP/Name-Provider server name (ppp.lan).
8. PPTP Account- username for authorization in the provider’s network.
9. PPTP Password- password for authorization in the provider’s network.
10. Meaning MTU - 1372
PPTP Retype Password- repeat the password to log in to the provider’s network.
11. Connect mode select- connection setup mode. Select \"Always\" for permanent connection. Save settings by pressing a key Save Settings.
NAT when automatically obtaining an IP address (DHCP).
In field My Internet Connection is: Select from the list Static IP.
1. Press the button Clone MAC Address.
2. Save the settings by pressing the key Save Settings.
NAT with static IP address.
In field My Internet Connection is: select Static IP.
1. IP Address- IP Address issued to you by your provider.
3. Subnet Mask- provider subnet mask.
4. Gateway- provider gateway.
5. MAC Address- press the button Clone MAC Address.
6. Primary DNS Address- preferred DNS Server provider (212.1.224.6)
.
7. Secondary DNS Address- alternative DNS server provider (212.1.230.111)
.
8. Meaning MTU - 1472.
9. Save settings by pressing a key Save Settings.
Checking Internet connection status.
Saving/restoring router settings.
After setting up, it is recommended to save them so that if problems arise, you can restore them. To do this you need to go to the tab Maintenance(MAINTENANCE), menu Save and Restore.
To save the current router settings, you must press the button Save(Save Settings To Local Hard Drive option). The settings file will be saved to the specified location on your hard drive.
To restore settings settings from a file, you must click the button Review, specify the path to the settings file, then click the button Upload Settings.
Attention! Pressing a button Restore Device will restore factory settings!
A WiFi access point is a device designed to obtain Internet access via Wi-Fi at any time, represented by a wifi router. In the modern world, we cannot imagine ourselves without the Internet, and such a useful thing makes life much easier.
Router adaptation
To work on the Netbynet network, any absolutely modern router can be configured in two ways: the provider will use a protocol with a dynamically issued IP address or a static one (it must be written down in your contract). As strange as it may sound, on a network “with VPN”, which is Netbynet, setting up a device on NetByNet is even faster than doing the same on a computer.
Advantages of wireless access
- You can deploy a network without laying a cable, for example, in places where it is impossible to lay it (in rooms of historical value or outside buildings);
- The existing router can easily be adapted into a wifi router for netbynet;
- http://beeline064.ru/tarifs the router will be reinstalled free of charge when moving;
- Netbynet provides a free connection to the Internet;
- Convenient tariff plans.
For example, in the tariff, the subscription fee includes the rental of a Wi-Fi router, and the “Connect” service provides the opportunity to buy a router and link 5 permanent IP addresses for the price of one (150 rubles/month).
Factors reducing speed
- WiFi NetByNet has a limited range. A typical home router of the typical 802.11b or 802.11g standard has a range of 45 m indoors and 90 m outdoors;
- A microwave oven or mirror located between NetByNet Wi-Fi devices weakens the signal level.
If for some reason the equipment model provided by NetByNet does not suit you, we suggest you purchase a Wi-Fi router in the online store. Ease of selection through the website and the lowest prices in Moscow.
TP-Link TL-WR702N great capabilities in small sizes
TP-Link TL-WR841N is enough power for a 2-room apartment
This is not at all difficult if you understand what exactly happens during our actions. All setup takes place on the company’s router TP-Link . Why exactly TP-Link? Having talked with various routers, I was pleasantly surprised by the stability of their operation: I set it up once and forgot about it for several years, without freezes, slowdowns and other unnecessary nonsense)
We turn on the router, if the lights do not start blinking, we begin to fumble around in search of the ON/OFF button, found in some models
On the back there is a sticker with the address, as well as Username (Username) and Password ( Password) to enter web—interface router, where the configuration will take place.
We connect the computer or laptop to the router with the cable included in the kit using YELLOW ports 1-4.
In the browser address bar enter the information we found out 192.168.0.1 and click Enter, appears authentication window(identification), in the fields username And password which we enter the data from the sticker, then OK
We get to the page state(tab Status).
Let's go from top to bottom, first comes firmware version (Firmware Version) And model edition (Hardware Version).
LAN she's the same The local network(Local Area Network) in our case, these are the network characteristics of the router - factory 48-bit address of the network device (MAC address), address in a network built using the IP protocol (set of agreements) (I internet P rotocol Address), subnet mask(Subnet Mask) is needed to determine the boundaries of [sub]networks, if any)
Wireless- everything related to Wi-fi - broadcasting wireless network(wireless radio), her Name (Name aka S service S et ID entifier), operating mode (Mode) supporting devices b, g, n IEEE 802.11 data transmission standard, channel width (Channel Width) radiation of electromagnetic waves, work channel(Channel) the most free one is selected automatically, maximum speed limit (Max Tx Rate), to secure again ( MAC address) and combining multiple access points to create wireless networks ( W ireless D istribution S system)
WAN — Global computer network (Wide Area Network) this is the most interesting thing, everything related to the Internet connection. Already familiar to us MAC And IP addresses, subnet mask Subnet Mask, and network gateway(Default Gateway) by default, traffic from the Internet to us passes through it, domain name server(DNS Server) converts clear and easy to remember site names, for example yandex.ru, in a way that network devices can understand IP addresses. Try entering this IP 87.250.250.3 into the address bar and you will immediately understand!) Completes the list connection duration (Online Time).
Traffic StatisticsInformation exchange statistics, this column records received (Received) And sent (Sent) bytes and packets.
System Up Time Time of continuous operation of the router, in 8 days there was never a need to reboot it)
Online
Here the number of body movements is minimal, you just need to go to the section Network —> WAN and in the field connection type(WAN Connection Type) choose Dynamic IP, takes care of network settings Online! Of course save the settings pressing a button Save at the bottom of the page)
After everything is set up, we connect it to the remaining socket ( WAN) router internet cable and enjoy life!
If you use the Internet Beeline
We also configure the network connection in the section Network —> WAN, only in this case connection type(WAN Connection Type) choose L2TP/RussiaL2TP. The situation with L2TP more interesting than simple Dynamic IP. So, our guest - Layer 2 tunneling protocol(L ayer 2 T unnel P rotocol) allows you to create virtual private network (V virtual P rivate N etwork) within the Internet.
In field username (User Name) write down the number from the contract with the provider starting with 0895 .
Password put in Password. Must be in the contract, may, for example, coincide with No.
We will also need to enter VPN server address (Server IP Address/Name), He tp.internet.beeline.ru
The router will receive the rest of the network settings automatically thanks to dynamic node configuration protocol (D dynamic H ost C onfiguration P rotocol) to the IP assigner address, Gateway(Gateway) domain name server(DNS).
Click Save and dive into the Internet, if it’s paid for, of course)
Provided that we still connect the Internet cable coming to the apartment in ( WAN) router socket!
If you use the Internet Netbynet or Akado
In this case, we need, the first section in the router settings where we should look is Networkthen-MAC Clone, there are only two fields here: MAC address of our computer (Your PC's MAC Address ) And MAC address of the router (WAN MAC Address). All we have to do is make them THE SAME, to do this press Clone MAC Addresses(copy MAC address) and then Save!
Now it remains only in the same section Network visit tab WAN and choose connection type (WAN Connection Type) Dynamic IP (Dynamic IP), the rest of the network settings will arrive automatically from the Internet provider’s server. Remember the button Save!
And also about connecting the cable with the Internet to the socket ( WAN) router to get the final result)
These internet providers are so different)
Connect the supplied cable to any LAN port on the back panel of the router and to the network adapter of your computer. Connect the ISP cable to the WAN (Internet) port on the back of the router. In the Windows XP operating system: Click “START”, then “Control Panel”, then “network connections”. Right-click on the local network connection and go to properties. Select the line “Internet Protocol (TCP/IP)” and go to properties. Configure your network connection to automatically obtain an IP address and DNS server address.
Or to static settings (For example, as shown in the figure).
Default: In the “User Name” field, enter in small Latin letters: admin The “password” field should be left empty. Click "Log In"
Before starting setup, update your router software to the latest version.
Http://ftp.dlink.ru/pub/Router/DIR-300/Firmware/Router/
Go to the web interface of the router. In the Setup – Internet menu, click the “Manual Configure” button.
In the Internet Connection Type field, select the connection type Russia PPTP (Dual Access).
Russia PPTP (Dual Access) is used to simultaneously connect to the Internet and local provider resources. Routes can be distributed automatically, but in the networks of some providers it is necessary to register static routes manually. This function is configured in the Advanced – Routing menu.
In the PPTP connection settings menu that appears below, select Dynamic IP.
In the Server IP/Name field, enter the address of the provider's VPN server. (On NetbyNet Moscow: ppp.lan)
In the PPTP Account field, enter the login issued by the provider.
In the PPTP Password and PPTP Confirm Password fields, enter the password issued by your provider.
Select Connect mode "Always-on".
Click the "Save Settings" button
It is problematic to choose a high-quality, reliable router for Netbynet. Here it is important to choose the best option and not spend a lot of money out of pocket. There are a sufficient number of technical characteristics, but the ones you need are purchased from them.
WAN ports
This connector is intended for connecting an Internet cable to the device. It affects how the Netbynet router interacts with the selected provider. Classically, there are two port options:
- Ethernet. A special channel of the communication service provider is used.
- DSL. Internet access is activated via a telephone line.
Certain models have a combination of these connectors. The difference lies in the technical characteristics and other parameters. But when setting up equipment for full operation, it is better to use the services of the provider’s specialists so that it is done at the highest level.
LAN ports
They are used to connect the computer to the device. Network access must always be maintained at the required level. Due to this, the router for Netbynet achieves maximum speed characteristics that will not change due to interference and distance.
Their number will influence the number of connected equipment. The classic version is four ports. Models with additional connectors may be available. Everything will depend on the needs of the user.
Model selection
Internet access is provided through selected, purchased equipment. This affects the manifestation of technical parameters. This applies, for example, to the maximum data transfer speed, which usually varies between 150-300 Mbit/s. In addition, you can select the necessary design, design of the router, number of antennas, connectors, ports and other data, which will subsequently affect the provision of a high-quality Internet connection.
- The provider recommends the Wifire Fastbox One router, you can view it at this link. Excellent combination of price and quality.
- And below you see models that may also be suitable.
- keenetic omni 2
- keenetic lite 3
- asus rt n11p
- asus dsl-n16u
- asus rt-g32 c1
- keenetic extra
- d-link 825
- upvel ur-315 bn
- upvel ur-325 bn
- asus dsl n66u
This is of course not the entire list, but it is the main one. Look, study, be sure to read reviews about each model.
Loading...
