How to set a password for Windows 7 Ultimate. Set a password on the computer. Open the settings window

Please note: To follow most of the instructions in this article, you must use a local Windows account with administrator rights.

How to set a password on a Windows computer

If other people have access to your computer, it is wise to protect Windows with a password. This way, your settings and data will be safe: without special knowledge, no one will be able to view or change them. Windows will prompt you for a password when you turn on your computer, when you change your account, or after resuming from sleep mode.

1. Open Start → Settings (gear icon) → Accounts → Sign-in options.
2. Click "Add" under "Password".
3. Fill in the fields according to the system prompts and click “Finish”.

How to set a password on Windows 8.1, 8

1. In the right sidebar, click Settings (gear icon) → Change PC settings. In the menu of the window that opens, select “Accounts” (or “Users”), and then “Login Options”.
2. Click on the " " button.
3. Fill out the fields, click “Next” and “Finish”.

How to set a password on Windows 7, Vista, XP

1. Open the section “Start” → “Control Panel” → “User Accounts”.
2. Select the desired account and click “Create a password” or immediately click “Create a password for your account.”
3. Fill in the fields using the system prompts and click on the “Create password” button.

If strangers do not have physical access to your computer, it may be better to disable protection. This will eliminate the need to enter a password every time the system starts.

1. Use the Windows + R key combination and enter in the command line netplwiz(or control userpasswords2, if the first command does not work). Press Enter.
2. In the window that opens, select in the list the account for which you want to remove the password, and uncheck the box next to “Require username and password.” Click OK.
3. Enter the password, confirm it and click OK.

Windows will stop asking for a password only when you turn on the computer. But if you lock the screen (Windows keys + L), log out, or the computer goes into sleep mode, the password prompt will still appear on the display.

If the “Require username and password” option is not available, or you want to completely remove your Windows password rather than disable it, try another method for more experienced users.

To do this, open the account management section using one of the instructions at the beginning of this article.

If the open section says that you are using a Microsoft online profile (sign in with email and password), disable it. Then use the system prompts to create a local profile, but do not fill out the password fields during the process.

After you disable your Microsoft account, the system will no longer sync your settings and files across different computers. Some applications may refuse to work.

If the local profile is initially active in the account management menu, then simply change the current password, leaving the fields for the new password empty.

If you delete an old password, the system will never prompt you for it until you add a new one.

How to remove the password when resuming from sleep mode

If you disable the password prompt when Windows starts, the system may still prompt you for it when you wake up. But you can deactivate this feature separately using these instructions.

1. In the search bar in Windows, enter “Power Options” and click on the link found to the section with the same name. Or find it manually through the Control Panel.
2. Click "Require a password when you wake up," then "Change settings that are currently unavailable" and check the "Don't ask for a password" checkbox.
3. Save your changes.

How to remove password when waking up Windows XP

1. Open the “Control Panel” → “Power Options” section.
2. In the window that appears, open the “Advanced” tab and uncheck the box next to “Require a password when exiting standby mode.”
3. Save your changes.

If you have forgotten your password and cannot log into your local Windows administrator profile, there is no need to reinstall the OS. There is a simpler solution: resetting the password protection. To do this, you will need another computer, a USB drive, and a free password reset utility.

Create a bootable USB flash drive on another PC

1. Download the Lazesoft Recover My Password installer onto any available computer.
2. Run the downloaded file and complete the installation.
3. Connect the flash drive to your computer. If necessary, make a copy of the files stored on it, since all information will have to be deleted.
4. Open Lazesoft Recover My Password, click Burn Bootable CD/USB Disk Now! and create a bootable USB flash drive using the program prompts.

Boot your computer using a flash drive

1. Insert the prepared USB drive into the computer for which you have forgotten the password.
2. Turn on (or restart) the PC and, as soon as it starts to boot, press the key to go to the BIOS settings. Usually this is F2, F8, F9 or F12 - depending on the equipment manufacturer. Most often, the required key is displayed on the screen while loading the BIOS.
3. While in the BIOS menu, go to the Boot section if the system does not redirect you there right away.
4. In the Boot section, install the USB flash drive to the first place in the list of devices that appears on the screen. If you don't know how to do this, look around - there should be some control tips nearby.
5. Save your changes.

If the BIOS is also protected by a password that is unknown to you, then you will not be able to reset Windows password protection using Lazesoft Recover My Password.

Perhaps instead of the classic BIOS you will see a more modern graphical interface. In addition, even in different older BIOS versions, the settings may differ. But in any case, the procedure will be approximately the same: go to the Boot menu, select the desired USB drive as the source and save the changes.

After this, the computer should boot from the flash drive on which the Lazesoft Recover My Password utility is recorded.

Reset your password with Lazesoft Recover My Password

1. Select Lazesoft Live CD (EMS Enabled) and press Enter.
2. Reset your account password using Lazesoft Recover My Password tips.
3. Reboot.

After these steps, Windows will stop asking for the old password, and you can set a new one according to the instructions at the beginning of the article.

Today we will learn how to set a password on a computer where the Windows 7 operating system is installed.

In what cases might this be needed? Completely different.

So, for example, to limit the people who can sit at a given computer, or for the security of information that is on hard drives, or to prevent children from sitting at a PC for several hours while their parents are not at home, and so on.

We will bet computer password in Windows 7 using your account. Usually there is one account on the computer with your name and it gives all administrator rights. That is, if we turn on the computer and log in as an administrator, then we can view all files, install, remove programs, and so on. You need to set a password for this main account and when you turn it on you will need to enter it, otherwise you will not be able to access the data.

Video: Put a password on your computer

How to set a password for an account in Windows 7

To do this you need to do a few simple steps. Let's get started.

Let's go to " Start - Control Panel».

In the window that opens, in the right corner of the folder, change View from “Category" to "Small icons".

Now in the same folder we look for the item “ user accounts" Let's go there.

We come up with a password and enter it twice in the appropriate forms; we can also enter a password hint. There you can write what exactly this password is associated with, so that if you suddenly forget it, it will remind you. Once everything is ready, click the “Create password” button.

As we can see, we now have an account Password protected, and it became possible to either delete the password or change it.

Now, when we turn on the computer, when the system boots, Windows 7 will require us to enter a password, otherwise the system will not start.

After setting a password for your account try restarting your computer. I got this window where I need to enter my password:

With these simple steps you can put a password on your computer with the operating systemWindows 7. In the next lesson we will look at how to set a password on a computer running Windows XP.

For now, that’s all I have, and if you have already figured out the topic of passwords in Windows 7, now I recommend reading the article: “ “! I wrote this article just a couple of days ago. See you!

Necessity. But first, let’s answer the question - why do you need a password on a PC and when can it come in handy? What can he protect us from?

If you install it on Windows 7, it can protect you from many troubles:

• will not allow someone else, without knowing the code for the operating system, to use your computer.
• needed for the security of your personal or business information located on hard drives when you are not around.
• will limit the time your children spend on the computer while you are not at home.
• serves as the first step in protecting your machine from viruses.

Installing it will undoubtedly be useful.

How to place it correctly

Or a laptop with Windows 7 installed is not at all difficult using a user account. As a rule, almost all home machines and devices from small companies that are not concerned about information security use only one user account. It usually has your name and gives you full administrative rights for that computer. Thus, if we turn on a computer or laptop and log in under this account, we will be able to view all the files on the disk, documents, photos. And not only look, but also delete. It also gives all rights to install and remove any programs. Both useful and not very useful. It is on this main account that we will provide protection for you in such a way that when you turn on the device without entering a password, you will not be able to access data, install or delete the application.

Sequencing

So, setting a password on the Windows 7 operating system of your PC is not difficult at all. To do this, you need to perform certain actions in the sequence listed below.

First you need to click the “Start Menu” button (the check mark on the button in the left corner at the bottom of the desktop), then go to the “Control Panel” menu item. In the future, for brevity, this sequence of actions will be written as follows: “Start Menu - Control Panel -...”

A window with control panel elements will open; we will need to change its appearance a little. To do this, in the right corner of the folder you need to change the display type in the “View” item from “Category” to “small icons”.

The Windows window view has changed to full, listing all control panel elements.

We need the “User Accounts” item - look for it and go in by clicking on it once.

A user account management window will open, which is called “User Accounts”. Here we need to select the “Create a password for your account” link.

This step is one of the most important. You need to come up with a set of characters. To be more secure, it should be difficult for humans or malware to pick up. It is better if capital letters, numbers and special characters are used along with lowercase letters. For example, "Got5%4". The more symbols, the more reliable, but don’t get too carried away - usually 8-10 symbols are enough. It should be noted that passwords like “123” or “qwerty” and the like can only protect against a child, and not for long. In the future, he will definitely pick it up and use your computer uncontrollably. Moreover, a simple password will not protect against intruders or malware.

We came up with it and entered it twice the same way to confirm and put it, repeating it in the appropriate input fields. If you wish, you can enter a hint for it, but you should not write it there explicitly, especially since Windows 7 itself will not allow you to do this. After you write everything, click the “Create password” button and now you can finally set it.

Now your PC user account is under good protection - a password has been set, about which the corresponding message “Password protected” is displayed. Now you can either change it or delete it completely. Then, every time you turn on, when loading Windows 7, the system will require you to enter the necessary characters; without this, you will not be able to log in to the system under your account.

That's it, a password has been set for your Windows 7 computer.

Hello everyone who came to my blog, today I will talk about setting a computer password. The article will be useful to anyone who wants to set up privacy and protect personal data from strangers.

The computer operating system Windows 7 is still one of the most convenient and widespread among most users. It is quite stable and easy to use; it is also distinguished by a pleasant interface and variable settings. But it often happens that you have to share your own computer with work colleagues or with household members, and you don’t really want anyone other than you to have access to personal data.

detailed instructions

• First of all, click on the Start button.

• Then we look for the line Control Panel, inside which there are all the tools we need.

• For maximum convenience, you need to change the type of viewing icons by clicking on the Category line in the upper right corner of the screen that opens.

• We select the Small icons value.

• Then look for the phrase User Accounts in the list.

• Once inside, you will immediately notice the line Create an account password, which you should left-click on.

• In the new window there are 2 lines that are highlighted for writing and confirming the desired password, respectively. Did you come up with it? Confirm the action by pressing the Create password button.

• It is recommended to restart your computer to check. During the startup process, you will see a corresponding window for entering a password, without which the system will not boot.

• On a Windows 7 laptop, this procedure is performed in a similar way.

Additional Information

Microsoft took care of its users by providing the ability to set reminders. A small text message will help you remember even the most complex enable code. It is enough to come up with a not entirely obvious, but understandable, reminiscent sentence.

A password on a computer is primarily a security measure that helps you reliably protect unnecessary data from prying eyes. The operating system allows you to create several accounts at once and divide them according to their purpose. The work account most often protected is where documentation, important files, screenshots and photographs are often stored.

The password to turn on the system can affect not only Windows 7, but also the BIOS itself, through which experienced PC users make many settings. The fact is that any failure in its settings can cause a critical error in the operation of your device, and setting a password does not work on all BIOS versions. You also cannot do without professional knowledge.

A very good help when creating a password is the ability to write in capital and regular case letters. This way, you can come up with an extremely simple code consisting of just 1 word. But the variety of letters from capital to small will never allow anyone to hack the Windows 7 system just like that. The most important thing is not to forget where each letter goes, which can be easily indicated in the corresponding hint column.

If you have any questions or difficulties, feel free to write in the comments, we will definitely discuss it.

Many PC users are concerned about their data and want to install protection on their account. Then they have a question about how to set a password on the computer. Today we will look at this issue in detail.

What does the password do?

Probably, the question will immediately arise whether there is any point in protecting your account. Of course have. For example, if you have many users at home, but only one computer, it’s definitely worth creating each one’s own account in the system and putting a code so as not to interfere with each other and keep all important files safe.

However, keep in mind that this is not the best protection and is easy to bypass. In search engines you can find many solutions on how to log into a password-protected Windows account.

Setting a password

Now, in fact, let’s move on to how to set a password on a computer step by step. We will look at the example of two operating systems - Windows 7 and 10. They are very popular lately.

Windows 7

Let's start with a younger version of the Windows operating system. It’s easy to install a security code on it:

1. Go to menu Start and open Control Panel.



2. There we are interested in the section "User accounts".



3. You should click on the link "Change Windows Password".



4. Now to set the secret code, click on the inscription: “Creating a password for your account”.



5. Next, you need to enter the code twice, as well as some word or numbers, as a hint if the code is lost or forgotten.



Here's how to set a password on a Windows 7 computer. The instructions are quite simple, and even a “teapot” can handle it.

Windows 10

Now let’s write down instructions on how to set a password on a Windows 10 computer:





Find out the Windows password

Some people are interested in how to find out the password set on the computer. This cannot be done, but you can reset the security code.

Resetting the password on Windows 10

To do this, we need a flash drive with a recorded distribution of this operating system. If it is, then:

1. Boot from a USB drive.
2. In the installer window you need to click "System Restore".
3. A window will appear with various actions. Click on "Diagnostics".
4. There you need to choose "Extra options".
5. Next you should click on "Command line".
6. Then you need to make a copy of it. To do this, you need to enter the command copy D:\Windows\system32\cmd.exe D:\Windows\system32\sethc.exe /Y .
7. A message will then appear notifying you that the file has been copied. You need to reboot the system.
8. Now you need to press the key about 5-6 times SHIFT when the OS asks you to enter the code.
9. In the command line that opens, enter net user admin2 /add .
10. Then we register net localgroup Administrators admin2 /add to make the new account an administrator.
11. After this, you need to restart the computer system and log into Windows through a second account and delete the code on the old one.