Highscreen phone how to connect mobile internet. Phone operating modes. Restoring your Highscreen phone to working condition

How to set up the Internet on Highscreen.

In the modern world, almost every person has a mobile device, or rather a smartphone. A necessary condition for a modern smartphone user is the ability to connect to the Internet.

Highscreen devices provide this opportunity. But just purchasing a smartphone does not mean immediately connecting to the Internet. First you need to buy the service from your mobile operator. It is very important to choose the right tariff. Depending on your requests, you can choose either unlimited or tariffed access.

It is also important to know how to set up such a connection. As a rule, the settings come automatically, you just need to save them. In some cases, it is not possible to set up the Internet the first time; in such situations, manual setting.

If you don’t know how to manually set up the Internet on your Highscreen device, then this material is just for you. We will tell you in detail how to set up the Internet using GPRS. This process will not require much effort from you. Just carefully follow everything written in the instructions. It is also important to know why you were unable to gain access the first time. We will also provide a list of these reasons.

Before manual setup...

1) You need to activate the “data transfer” option in the settings. This is necessary to open access for data transfer from the network. You can find this option in the “mobile network settings” menu item.

2) If you do not have enough funds in your account, you should top it up, otherwise it will not be possible to go online.

To understand when you are connected to the network, look at the link indicator. There should be a letter symbol next to it, indicating an Internet connection. If you have taken into account all the above points, then move on to manual settings.

Setting up the Internet manually.

1) Go to the “Settings” menu.

2) Open the “more” item, and then go to the “mobile networks” column.

3) Here you need to select the “access point” option.

4) If the list of access points includes one that applies to your operator, then just activate it and access is obtained.

5) Otherwise, proceed to create a new access point. To do this, select the line “new...” in the list of functions.

6) A new window will open. There will be empty fields and they need to be filled in with certain information (). You must fill in the “APN” field without errors.

8) Save the created access point.

9) Pay attention to the connection indicator; if there is a letter next to it, then the connection was successful.

10) If the connection is not activated the first time, reboot the device.

There are several reasons why you cannot access the Internet. Among them are such as: incorrectly filling out fields when creating a new account, a faulty device, or being outside the network coverage area. Analyze all factors and identify the problem. If you yourself cannot determine what the reason is, contact a specialist.

Option 1

1. First turn off the gadget
2. Press for a few seconds Volume Up + Nutrition
3. Stop pressing the buttons when we see the Android logo or logo on the screen Highscreen
4. Press the button Nutrition to enter Recovery mode
5. In the menu that appears, select Wipe Data/Factory Reset and confirm

7. Confirm the reboot system now menu item in conclusion to complete the reset and reboot

8. Reset completed after reboot

Option 2

1. Go to Phone Settings

2. Next menu item Recovery and reset

3. Then click on Reset settings

4. Click the Reset button and agree to the loss of personal data
5. The reset process will be completed after the phone restarts

Highscreen Bay factory reset

Attention!

• After performing a hard reset, all your personal data and applications located in the internal memory of Highscreen Bay will be destroyed.
• For the factory reset to be successful, the battery must be charged to about 80%.
• Images or videos for some items may not match your specific phone model.

One of the first questions that plagues phone owners Highscreen Zera S, F- how to adjust sound volume in headphones and speakers when listening to music or making a phone call. The thing is that in models of this line the volume is calibrated according to the included headset, or not calibrated at all. Unfortunately, in pursuit of cheapness, smartphone users may not encounter such problems. But let's get to the point. The volume calibration method described in this article can be applied to phones Highscreen Zera S and F.

Engineering menu

In order to change one or another factory parameter, we will need to enter the so-called Engineering menu. There are two ways to do this.

Method 1. Dial the following combination on your phone: *2366*# . The advantage of this method is accessibility and simplicity.

Method 2. Install the application Mobileuncle MTK Tools. With this application you will have the opportunity to fine-tune and debug your smartphone.

ATTENTION! Permissions required for installation ROOT(for those who, of course, understand what we are talking about).

To go to the Engineering menu in the program MTK Tools click on the appropriate item - Engineer Mode ("Engineering Mode" in Russian program version).

Overview of sound parameters in the Engineering menu

So, in the engineering menu go to the tab Hardware Testing and select the item Audio. This page will display various parameters of the smartphone's sound system.

Points of interest to us:

1. Normal Mode— standard profile;
2. Headset Mode— Headset or Headphones mode;
3. Loud Speaker Mode— Loudspeaker mode (main speaker);
4. Headset_LoudSpeaker Mode— Loudspeaker operating mode when headphones/headsets are connected (for example, you are listening to music and they call you, you will hear the sound both from the speaker and in the headphones).

Let's use the example of the mode Normal Mode Let's look at the main parameters that we will configure in the future.

Click on the item Normal Mode on the tab Audio, There are four fields available to us here − Type(type), Level(level), Value is(value) and Max Vol. (maximum volume). Let's take a closer look at each point.

Type

Sound sources:

1. SIP - Internet telephony (most likely programs like Skype, Mail.Ru Agent, etc.)
2. Mic - microphone
3. FMR - FM receiver
4. Sph - conversational speaker
5. Sph2 - ?
6. Sid - sound card identifier
7. Media - multimedia (audio, video files)
8. Matv - ?

Level

Volume level. As you know, the volume in Android has 7 positions. Every time you press a key Volume +, you turn on the next volume mode. In the engineering menu we opened, you can assign volume parameters to each of the seven modes. Meaning Level indicated from 0 to 6.

Value is

Volume value of the source specified in the field Type. Specified within from 0 to 255.

Max Vol.

The maximum volume level, or rather the degree of amplification of the signal from the source specified in the field Type. The parameter is not associated with the Level field. Indicated in the range from 0 to 160.

Adjusting the headphone/headset/speaker volume

So, let's, for example, adjust the volume of music/movie playback in the device in headphone/headset mode. To begin, go to the menu item Headset Mode.

In field Type select " Media"(media files - mp3, avi, etc.).

In field Level select the volume level to be adjusted. For example, I didn’t like the too quiet playback at level 5. So we click on the item with the name in the drop-down list Level 5.

Meaning Value we select empirically. I recommend comparing the value of this item ( Level 5) with its value for the level Level 6 to have an idea of ​​how big the difference is between them. Next, click on the button Set. An information window will appear indicating that the parameter has been edited.

Sometimes it is enough just to set the desired value in the field Max Vol. and the volume level will go up/down proportionally for everyone Level-Oh.

After the parameter has been edited, restart media player/browser, etc. to hear the changes. Devices may be required.

Bottom line

Use this manual to similarly configure the parameter you need. I hope I explained everything clearly. If anything is unclear, write comments and be sure to like!)

Sometimes the phone stops showing signs of life. What is this connected with? There are many options, from hardware problems to firmware and software. How to figure it out? Consistently follow the instructions below.

Was the device heavily discharged? If so, it will take a sufficient amount of time to restore the deep discharge. Some models require up to an hour to accumulate capacity. Try to avoid such cases, this affects the duration of work. Discharge to 20-10 percent and send your smartphone to charge. It is not recommended to keep it on charge; this will negatively affect the battery. The gadget may sometimes blink, show a black screen or various symbols. Wait half an hour, the device should turn on on its own. Advice for long-term use - if possible, do not use highscreen outside when it is cold. Low temperatures have a detrimental effect on the main components and drain the charge faster.

Check the integrity of the charging wire. If it is of poor quality, the possibility of sudden failure increases significantly. Try to buy only original wiring, then you will be sure that they will not suddenly fail.

Another option why the equipment does not turn on is that the socket (the hole where the charging plug is inserted) is broken. Possibly due to moisture, debris, damage (attempts to insert connectors not included in the kit). Replacement at a service center costs about a thousand rubles.

If the gadget falls into water, it must be removed as quickly as possible and dipped in alcohol, left for exactly a minute and placed under a hairdryer. Dry and leave alone. By taking action, there is a chance that the product can be saved.

Did you drop the phone before it completely disconnected? If yes, then there is a high probability that a qualified diagnostician can help. Damage can be of various types; an experienced technician is needed to diagnose the damaged element. We also want to warn those who like to open bottles using technology - you reduce your life activity significantly.

If you downloaded unfamiliar software before shutting down, tinkered with the settings, and you don’t have an antivirus, you need to reset it to factory settings. In most cases this helps. Please note that all data not located on removable media will be lost. In many models, when you remove the back button, you will find a bulge, the so-called Hard Reset. Clicking it will start the reset process.

If the battery is removable, remove it for a while.

The home button, the main one and sometimes the only one on the display, may be faulty. Sometimes the device shows signs of life - flickering, blinking.

If you connect your smartphone to a computer and see data on the PC, flash the device, the procedure mostly helps. If not, we strongly recommend contacting a service center. You can completely destroy the unit on your own.

As the practice of specialists shows, most often the problem that the highscreen does not turn on is that the battery is deeply discharged. Put the unit on charge, be patient, and most likely the equipment will turn on and will delight you for a long time!

This is the official instruction for Highscreen Power Four in Russian, which is suitable for Android 5.1. If you have updated your Highscreen smartphone to a more recent version or “rolled back” to an earlier one, then you should try other detailed operating instructions that will be presented below. We also suggest that you familiarize yourself with the quick user instructions in question-answer format.

Highscreen official website?

You have come to the right place, because all the information from the official website of the Highscreen company, as well as a lot of other useful content, is collected here.

Settings-> About phone:: Android version (a few clicks on the item will launch the "Easter egg") ["Out of the box" Android OS version - 5.1].

We continue to configure the smartphone

How to update drivers on Highscreen

You need to go to "Settings -> About phone -> Kernel version"

How to enable Russian keyboard layout

Go to the section "Settings->Language and input->Select language"

How to connect 4g or switch to 2G, 3G

"Settings-> More-> Mobile network-> Data transfer"

What to do if you turned on child mode and forgot your password

Go to "Settings-> Language and keyboard-> section (keyboard and input methods)-> check the box next to "Google voice input"

Settings->Display:: Auto-rotate screen (uncheck)

How to set a melody for an alarm clock?

Settings->Display->Brightness->right (increase); left (decrease); AUTO (automatic adjustment).

Settings->Battery->Energy Saving (check the box)

Enable display of battery charge status as a percentage

Settings->Battery->Battery Charge

How to transfer phone numbers from a SIM card to the phone memory? Importing numbers from a SIM card

1. Go to the Contacts app
2. Click on the "Options" button -> select "Import/Export"
3. Select where you want to import contacts from -> “Import from SIM card”

How to add a contact to the blacklist or block a phone number?

How to set up the Internet if the Internet does not work (for example, MTS, Beeline, Tele2, Life)

1. You can contact the operator
2. Or read the instructions for

How to set a ringtone for a subscriber so that each number has its own melody

Go to the Contacts application -> Select the desired contact -> click on it -> open the menu (3 vertical dots) -> Set ringtone

How to disable or enable key vibration feedback?

Go to Settings-> Language and input -> Android keyboard or Google keyboard -> Vibration response of keys (uncheck or uncheck)

How to set a ringtone for an SMS message or change alert sounds?

Read the instructions for

How to find out which processor is on Power Four?

You need to look at the characteristics of Power Four (link above). We know that in this modification of the device the chipset is MediaTek MT6735M, 1000 MHz.

Settings->For Developers->USB Debugging

If there is no "For Developers" item?

Follow the instructions

Settings->Data transfer->Mobile traffic.
Settings->More->Mobile network->3G/4G services (if the operator does not support, select only 2G)

How to change or add input language on the keyboard?

Settings-> Language and input-> Android keyboard-> settings icon-> Input languages ​​(check the box next to the ones you need)