NetView Local network map. Enabling and disabling a network card on a computer Virtual network card on Windows 10

If you have at least once encountered the technical support of an Internet provider, or the support of any program related to a local network or Internet access, then most likely you were asked about setting up your computer’s network parameters. For novice users, this is a dark forest, of course. And such a question puts the poor fellow into a complete stupor. As a result, for the simplest manipulations you have to call a computer technician and pay him money. But everything is very simple. In this post I will talk in detail about the basic network settings in Windows 10.

In the Windows 10 operating system, network settings mean the configuration of the TCP/IP protocol on the network adapter, as well as setting the parameters for accessing the computer from the network (local or global).

1. IP Protocol Version 4 (TCP/IPv4)

Click the Start button and enter the words in the search bar:

View network connections

The result should look like this:

Click on the icon from the control panel and we will open the “Windows 10 network connections” window:

Select the one you need and right-click on it. The properties window will open. These are the main adapter network settings in Windows 10:

Now you need to find the parameter IP version 4 (TCP/IPv4) and double-click on it with the left mouse button. This brings us to the configuration of the main IP network protocol. There can be two options for setting it up: 1 - dynamic IP address.

This option is relevant when a DHCP server is running in the local area and the computer already receives its IP from it. It is usually used when connecting a PC to a home WiFi router or to a telecom operator's network. The protocol configuration in this case looks like this: That is, the system receives all addresses automatically from a special server.

2 - static IP address. In this case, the IP must be registered statically, that is, this address will be assigned to this computer on a permanent basis. It looks like this:

What addresses should be entered in the fields? Look, the screenshot above shows an option for connecting to a router or modem that has the DHCP server disabled. The gateway IP is the address of the router itself on the network. It will also be used as the main DNS.

Secondary DNS can be specified as the provider's server, or public DNS servers Google (8.8.8.8) or Yandex (77.88.8.8).

The mask used in home networks in 99 cases out of 100 is regular, 24-bit: 255.255.255.0. The IP address must be selected from the gateway subnet. That is, if the gateway is 192.168.1.1, then you can take any number from 192.168.1.2 to 192.168.1.254 from the computer. The main thing is that he is not busy with anything else.

Click on OK and close all windows! The main network protocol in Windows 10 is configured.

2. Sharing

Configuring these network settings is responsible for accessing the computer from the network. To get here you need to select your adapter (WiFi or Ethernet) in the Network and Internet section and click on the “Change advanced sharing settings” icon. This window will open:

Here you can see network access settings for several profiles: Private, Guest or all networks. Select the one with the mark (current profile) at the end. First up is Network Discovery. It is responsible for whether your PC is visible from the network or not. If you are connected to a local network at home or at work, then it is better to leave it turned on. But when the computer is connected to the Internet directly, then to avoid threats and attacks, it is better to disable detection. Next up is File and Printer Sharing. If it is turned on, then anyone can connect and use the printer that is connected to your PC. For a home network this does not matter, but in a corporate or public network it would be better to disable it. The last settings are Connecting a home group. It is responsible for guest access from the network to the computer. If you allow Windows to manage connections, access will be through the Guest account. This is more convenient on a home network. For others, it is better to use user accounts so that anyone cannot access you. Save the changes.

These are the main network parameters of Windows 10, which are responsible for the operation of the network and connecting the computer to the Internet.

set-os.ru

How to reinstall the network card driver and reset network settings in Windows 10

If you have problems with the network or Internet in Windows 10, then you should reinstall the network card and reset the network settings to default values. Don't know how to do this? A new feature in Windows 10 will help you - automatically reinstall drivers and reset settings.

Network problems in Windows 10 are a fairly common topic. They are not always caused by the operating system; often the cause is incorrect user settings or problems with the drivers of a specific network card model.

How to reinstall the network card and reset settings in Windows 10

If you want to resolve problems yourself, Microsoft has made the process easy for you. Windows 10 has introduced a very useful feature that allows you to automatically reinstall the network card driver, as well as reset settings to default values.

If you have connection problems, you can follow the steps below to reinstall the drivers and restore the network components to factory settings.

Go to the Start menu and click on the gear icon to enter System Settings.

Then go to the "Network and Internet" section. On the Status tab, you can check your Internet connection. Here we are interested in two items in particular - “Network troubleshooter” and “Network reset”.

First, use the first point before resetting to default settings. There is always a chance that after completing the first step, the problem will be solved and there will be no need to reinstall the drivers.

After entering Troubleshooters, click Next to enable scanning for faults. If the troubleshooter finds any problems, it will immediately try to fix them automatically. You may need to restart your computer after the restore operation is complete.

If the above steps did not bring the desired result, then go to the second step to reset the settings and reinstall the components.

Go to Settings again, then Network and Internet - Status. This time, on the right side, scroll down and select “Network Reset.”

A message will appear in a new window that this action will remove and reinstall all drivers for network devices, reset settings (for example, you will need to re-enter the password for the Wi-Fi network), and also return all system components responsible for the network to their initial settings. Confirm this procedure with the “Reset Now” button.

After performing the reset, restart your computer and check that everything works now.

NetAdapter - an alternative method for troubleshooting network problems

Basic problems with the network and Internet connection can often be solved by simple methods - just reinstall the network card drivers, change the DNS to the Google address, update the IP parameters and similar operations. However, all these settings are scattered across various sections of Windows. What if everything was in one place?

It is for this purpose that the NetAdapter utility was developed, which groups all the tools for troubleshooting network problems in one window. That is, with one click you can perform the above operations and more. However, this is not a tool that can magically solve absolutely all network problems, but given the nature of common problems, there is a high probability that the program will help find the causes of faulty network components and solve them.

The program must be run with administrator rights (right click - run as Administrator). The right side of the program window contains information about the network card and connection - IP address, MAC address, current use of the DNS address, etc. On the left, in turn, there are all the tools for setting up and diagnosing the network.

Among the available tools here are resetting temporary DNS memory, changing DNS addresses to Google (for example, it helps when the Internet connection is active and pages do not open), cleaning the hosts file (also viewing its contents), updating IP, resetting configuration settings and security, “resetting” network settings, rebooting NetBIOS. You can also use spoofing to change the MAC address of a network adapter. To activate tasks (one or more), select them from the list, and then start them using the button at the bottom of the window.

Advanced Repair Tools are also available to troubleshoot TCP/IP problems, reset Proxy/VPN settings, and diagnose Windows Firewall. If you often have network problems, then NetAdapter Repair All in One can save you a lot of time.

InstComputer.ru

How to set up Internet in Windows 10?

Detailed configuration of the operating system is quite complicated for the average computer user, so errors and difficulties often arise during the process. Especially when it comes to creating an Internet connection. It is not always possible to figure out where the network access parameters are located and how to use them. However, reading this article will help clarify most aspects, thereby solving the issue of connecting to the Internet without calling a computer specialist.

Types of Internet connection

First you need to understand network interfaces. There are several connections through which information is transferred from the user’s personal computer to the Internet:

Regular Ethernet connection. It involves a direct connection of the provider cable to the computer. Capable of passing through a separate router or built-in ADSL modem.
High-speed PPPoE connection, providing fast data transfer thanks to innovative network technologies.
Wireless WLAN connection. It requires a router that supports the appropriate wireless interface.
Connection via portable USB modem. The speed of this method will depend on the technology providing data transfer. Today there are 3G and 4G communications.

We will try to explain how to configure all of the above network interfaces. If you already know which method of accessing the network you will use, then you can move on to a specific section.

Connecting to the Internet via Ethernet mode in Windows 10: via a network cable (router, modem)

Let's first consider a simple connection to the Internet via an Ethernet port. It is characterized by the fact that it does not require a login and password to fully use the services. There is only a laid cable from the provider leading to the consumer’s apartment.

To start setting up an Ethernet connection, you need to insert the cable connector into the router and connect the latter to a personal computer (it is also possible to connect to a network card without a router). You just need to insert the cable into the socket.

If the Ethernet connection settings have already been entered into the operating system, then the Internet will work instantly, notifying the user about this with a notification in the taskbar. If nothing happens after inserting the cable, you need to install the network card or router driver.
If a notification about a successful connection appears on the taskbar, but the status “Unknown network” or “Restricted” is displayed, then you should carefully check the settings of the Internet adapter. This usually solves the problem of an inoperative connection.

Setting up an Ethernet connection in Windows 10

In Windows 10, you can configure the adapter using the following instructions:

1. First of all, you need to click on the network connection notification and then select “Network Center” in the window that appears.

2. In the open window, select the “Change parameters of the (network) adapter” section, then a window with available network cards opens. Here we point at the Ethernet adapter, right-click and open its “Properties”.

In the list that opens, select “IP version 4” and click on it 2 times. In the settings window that appears, check that the “Automatic connection of IP and DNS addresses” mode is set. If not, it should be noted. Upon completion, you need to confirm the changes with the “Ok” button.

After all the steps described above, the Ethernet connection should definitely work. Otherwise, you need to restart the computer, check the integrity of the network cables and make sure that there are no breakdowns on the side of the Internet provider.

Advice: if attempts to set up a network connection are unsuccessful, you need to ask your provider about the presence of a binding by MAC address. If such a connection exists, it is recommended to inform the provider of the computer address. He will indicate it in his database and the Internet connection will start working.

Setting up a high-speed PPPoE connection in Windows 10

Some providers lay network cables in clients' homes, and then provide a special login and password required for mandatory connection authorization typical for a given high-speed PPPoE connection. To configure it, you need practically the same manipulations as in the case of Ethernet. But with the only difference being the need to create a connection yourself.

Tip: if the network cable passes through the router, you do not need to configure anything on your personal computer, since all settings are made in the router itself. You just need to insert the cable leading from the modem into the corresponding connector on the computer case. The sequence of actions for creating such a connection is described above.

If you don't have a router, you will have to connect the network cable directly to the computer. To do this, you will need to know the login and password given by the provider. If this condition is met, you can begin to follow the instructions below.

First, the user needs to open the “Network and Sharing Center” after clicking on the Internet connection icon on the taskbar.

Then you need to “Create a new connection” by entering the section of the same name. Select the “Internet Connection” item and click the “Next” button.

In the window that appears, you need to select the “High-speed connection” item and click on it. After this, the options will appear.

Now you must enter the username and password provided by your Internet service provider. You can also name the connection by the name of the provider to avoid confusion. Check the box next to “Remember password”. After completing the steps, you need to press the “Connect” button.

If the parameters are set correctly, the Internet should work in a few seconds.

You can view information about the established network connection and manage it on the taskbar by clicking on the corresponding icon.

If you click on the connection name, a special menu will open. In it, the user can change connection parameters at his discretion.

Connecting to the Internet via Wi-Fi in Windows 10

If you have a wireless router, connecting to the Internet via Wi-Fi is very fast. It allows you to access the network from any home device, and also provides complete freedom of movement around the apartment due to the absence of cables. To set it up, you first need to install the appropriate Wi-Fi adapter driver on your computer. Although Windows 10 almost always does this automatically. The potential user can only open the list of available networks (WLAN), select the required one and enter the password set on the router. After a few seconds, the computer will connect to the Internet.

Click on the Internet connection icon on the desktop (bottom right), select the one you want by clicking on it, check the box for subsequent connection and click “Connect”.

When connecting to the network, some problems may arise that are related to the network adapter driver; for more details, see the article Problems with the wireless Wi-Fi adapter driver in Windows 10.

Connecting and setting up the Internet via a 3G/4G modem in Windows 10

All that remains is to describe the connection method using a portable modem that supports 3G or 4G communication technology. If you have previously had experience installing a similar connection on previous versions of the Windows operating system, then there will not be any particular difficulties. And for those who are doing this activity for the first time, detailed instructions are given below.

First you need to insert the modem connector into the USB port of your personal computer. The necessary driver can install itself if the modem manufacturer provides the corresponding function. Sometimes you need to deal with this issue yourself. For example, find the driver on the manufacturer’s website or install from disk. When connecting a modem, when prompted to install the driver, specify the path to its location, previously downloaded and by inserting the installation disk. If there is no driver for Windows 10, you can try the software for previous versions of Windows 7.8 systems.
After finding the driver and installing it on your computer, you should start setting up the connection. The sequence of actions performed is similar to that carried out when creating a high-speed PPPoE connection. You need to open the “Network and Sharing Center” after clicking on the Internet connection status on the taskbar.

In the small window that appears, you need to click on “Create a new connection” and select “Internet Connection” (this item is the first in the list) and confirm with the “Next” button.

Next, you need to select the “Switched” item. It is marked with a landline phone icon.

Now it's time to enter parameters. This includes information such as number and user name. This information is provided by your ISP, so if you don't have it, you should contact your network service provider directly. The image below shows an example where the services of the Intertelecom provider are used. After filling out the text fields, press the “Create” button.

After completing the above steps, the network connection should work. If this does not happen, you need to check the USB modem and the quality of signal reception. In some regions, the coverage is not of very high quality and the signal may constantly drop out, preventing you from surfing the Internet. Various tricks such as extending the antenna and going out into the open can solve this problem.

It is noteworthy that the created connection can be stopped, disabled or edited at your discretion. It can also be deleted if there is a need to change the provider. To perform these manipulations, you need to click on the network connection icon on the taskbar and select the required item from the list that appears. You should click on it to display the control page (it is also available in the computer section “Settings” -> “Dialing”).

The signal reception status will always be displayed on the taskbar as a small icon. By its appearance, the user is able to determine what is currently happening with the connection. If the icon is flashing, data is being transferred. A crossed line means no signal at all. And if a yellow exclamation mark is displayed next to the icon, then there are problems. The Internet refuses to work in this case.

Conclusion

If you have established a network connection on a laptop or personal computer with a Wi-Fi beacon, then you can use it as a router, see the article How to distribute Wi-Fi from a laptop on Windows 10. This allows you to distribute the Internet to all home devices without having a wireless router.

Regarding the occurrence of the most common error “Limited”. This notification has a yellow exclamation mark icon and indicates that there is no network connection. Its causes are very diverse, and if it appears. This topic will be discussed in the next article on the site.

The above instructions for setting up the connection turned out to be voluminous, but are divided into sections. Therefore, if you need to create a connection, you need to go to a specific header and start reading. We hope that thanks to this article you will be able to set up a network.

pc4me.ru

How to set up Internet in Windows 10

How to properly connect and configure the Internet on personal computers with the Windows 10 operating system is the topic of the article. It will be especially useful for unprepared users who have updated their PC to the latest version, but still have not understood all the intricacies of the settings. Some users do not know where and what is configured to connect to the Internet, while for others it does not work at all, even with the parameters set correctly. You will learn four different connection methods - standard Ethernet network, high-speed PPPoE connection, wireless connection, Wi-Fi technology, and modems. So, how to set the correct parameters, or configure the connection again if the Internet is not connected. There are several ways to connect your computer to the global network. You will learn about four basic connections:

About a standard Ethernet connection that is connected using a cable. This uses a direct connection, modem technology or a router.
About a high-speed connection that supports the PPPoE tunneling protocol.
About wireless, Wi-Fi, technology.
About connecting to the Internet using 3G/4G USB modems.

So, what is each connection and are there any subtleties in its settings. The first method, an Ethernet connection, is the most common.

Ethernet: connecting to the Internet in Windows 10 via a network cable (router, modem)

Ethernet, a packet data technology, is called the simplest connection. Internet service providers install network cables into homes and connect individual apartments. With this connection, the Internet can be connected directly or through a router or ADSL modem. This is the same Internet connection, but connected using different devices. To be more precise, a network cable is used everywhere, only the connection method is different - direct or through special devices for packet data transmission. To set up an Ethernet connection, connect the cable from your router, modem, or service provider to your personal computer into the special connector for network cards:

With the correct settings, the connection will occur automatically, and you do not need to enter any passwords or logins: they are absent in this connection. If the connection status changes in the notification panel, it means the Internet is working. What to do if the network cable is connected normally, but the computer does not see it? You need to look for the reason in the drivers for the network card. This is a common problem after a system update. The driver for the card is installed automatically during the update by the OS itself, but for some reason it does not work. And you can solve the problem by installing the correct driver. To do this, you need to download it from the official page, selecting your PC model, and install it on your device.

Now, what should you do if, after connecting the cable, the connection is activated, but its status is “Limited”? The reasons may be hidden in incorrect parameters of the Ethernet adapter.

To check that the settings are correct and set the desired parameters, do the following:

If all parameters are correct, the Internet connection status will be active. If the status does not change, try rebooting. If even after a reboot the network is not found, not recognized, or is limited, make sure that the network cable, router, or modem is connected correctly. Also contact your service provider's technical support - the problem may be on their side.

Setting up a high-speed connection (PPPoE) in Windows 10

PPPoE or high-speed connection differs from Ethernet in just a few nuances. Internet service providers also install cables into homes and connect individual apartments. But to connect to the Internet in this case, you will need a password, login and possibly some additional settings on your PC or router if wireless technology is used. But this is not the most important thing. For the Internet to work, you need to connect it, that is, first create a connection, and only then enter logins and passwords. If you use a router with configured connections (including PPPoE) to connect to the Internet, you do not need to change any settings on your PC. Simply connect the cable to the device and configure it as you would with an Ethernet connection. If you connect to the network directly via cable, without devices, and with a password and login, you must first create this connection. To create a connection, do the following:

Click on the icon and delete, change connection parameters, etc.

Internet connection via Wi-Fi

If you have a Wi-Fi router, you can connect to the Internet using wireless technology. You can also connect your PC to the network of friends and other places where there is free access. The first thing to do when using this internet connection is to check the driver. If it is installed, the system usually does this automatically, open available networks, select your Wi-Fi and enjoy the connection. Well, perhaps you will first have to enter a password if there is protection.

Connecting via wireless, Wi-Fi, technology on Windows 10 is easy.

Setting up the Internet via a 3G/4G modem in Windows 10

And finally, the fourth method of Internet connection, which uses 3G/4G modems (3rd and 4th generation of mobile communications). The first step is to connect the modem to the computer. But for the device to work, a working and suitable driver must be installed for it. It is better to download drivers from official resources - it is more reliable. This is the case if you did not find a disk with them in the box with the modem. When searching for a driver, focus on the modem model. If it has not yet been released by the manufacturer for Windows 10, download it for other versions of the OS. Should come up. The modem is connected, the driver is installed and the setup begins. Looking ahead: the connection is configured in almost the same way as high-speed PPPoE Internet. So do this:

If the parameters are set correctly, you will see the connection created and activated. If not, the settings may be incorrect or the modem is not properly connected to the PC. If this does not help, contact technical support for clarification. If coverage is poor and the signal level is weak, the Internet will be slow or not work at all. Sometimes increasing the signal level helps, but it is best to worry about buying an antenna for the modem. The connection you created can be edited, deleted, etc. To change settings and other actions, click on its icon.

There is an icon for your connection in the notification panel. Monitor its status, stop, reconnect, set new parameters if necessary, etc.

This is how you can easily and quickly connect and configure the Internet on Windows 10.

And a few more words

Now, by connecting your computer/laptop to the Internet, you can turn it into a Wi-Fi router and distribute the Internet to peripheral devices - other PCs, smartphones, tablets. In this case, you do not need to buy special equipment for this. All you need is to create an access point on your computer using one of the free specialized utilities. How to create hot spots for distributing the Internet to other devices is the topic of a separate article. Even an untrained user can understand it.

Have you connected via cable or wireless network, setting the correct settings, but the Internet does not work, and you see a notification about a limited connection and a yellow exclamation mark? This error is common on personal computers with Windows OS, both in the new version and on old ones.

What OS do you have installed?

pc-helpp.com

Setting up the Internet in Windows 10

So, let's figure out how to set up the Internet in Windows 10. I would like to say right away that this question is quite extensive, so let's start from the very beginning to the very end - from setting up a network card to choosing a browser.

Step #1: Pre-flight check

First, you need to check if everything is ok with the network card. In other words, is the driver installed on it? In most cases, Windows installs it itself, however, if you have old or unusual hardware, you will have to do this step manually. So, to check if you have a driver for the network, do the following:

Press Win+X and select “Device Manager” from the menu that appears;
Expand the “Network adapters” section (it is located almost at the very bottom of the list) and check if your network card is there;
Also, it wouldn’t hurt to pay attention to the “Other Devices” section, marked with a yellow triangle; if it contains devices named “Network Adapter” or “Networkadapter,” then you’ll still have to look for a driver.

The “firewood” itself can be found either on the disk with your motherboard, or on the manufacturer’s website (this is especially true for laptops). Don’t worry if you don’t have a driver for “ten” at hand - in 95% of cases, the one written for “seven”, “eight” or even “Vista” will work perfectly. In this regard, the question of how to set up the Internet in Windows has not changed for the last 10 years.

Step No. 2: check the network settings

If your network is configured correctly, the Internet should start working after installing the driver. Otherwise, in order to “finally configure the Internet in Windows,” we recommend that you check the settings of the network cards.

Step #3: connect to WiFi (if available)

For some, the question of how to set up the Internet in Windows is identical to how to set up WiFi. If you are using a WiFi connection, then you now need to connect to the network. To do this, left-click on the “ladder” icon near the clock and, in the window that appears, select your home network. All that remains is to enter the password and you are already on the World Wide Web.

Step #4: select a browser

All that’s left to do is choose a program with which you will surf the Internet. Here I would like to immediately say that felt-tip pens have different tastes and colors, however, if you want to approach this issue wisely, we recommend reading the article to the end.

Microsoft Edge. This browser replaced the rather boring Internet Explorer. By the way, the new program works very, very quickly. What's more, it syncs your data with the cloud, so if you use your account on different devices, you won't have to drag around bookmarks or remember passwords. There are also disadvantages - this program does not yet support extensions, so if you need something other than a Flash player, you will have to find something else.

Google Chrome. Today, this browser occupies a dominant position - it is popular, has a bunch of add-ons and works quite quickly on new PCs, however, if your computer is not particularly fast, it is better to give preference to the same Edge or Firefox, which we will talk about later. By the way, the popular Yandex.Browser, Amigo, Opera, Uran (pah-pah-pah), as well as many other browsers, are the same chrome, but only with a different icon and a couple of additional bells and whistles of varying degrees of lousiness.

Firefox. The oldest browser mentioned here. Fast, multifunctional and popular. Among the disadvantages, one can note only the long time of the first launch, but after the start, it works great even on old PCs. In addition, there are a huge number of extensions and themes for it, the number of which even exceeds that for chrome.

How to reinstall the network card and reset settings in Windows 10

If you have connection problems, you can follow the steps below to reinstall the drivers and restore the network components to factory settings.

Go to the Start menu and click on the gear icon to enter System Settings.

If the above steps did not bring the desired result, then go to the second step to reset the settings and reinstall the components.

Go to Settings again, then Network and Internet - Status. This time, on the right side, scroll down and select “Network Reset.”

After performing the reset, restart your computer and check that everything works now.

NetAdapter - an alternative method for troubleshooting network problems

14.02.2018

Many have encountered problems connecting to the Internet, and the reason sometimes lies in the clutter of the network card. You can try to identify the cause: disconnect and reconnect, restart the router and computer, check whether other devices can connect to the Internet. Sometimes restarting the computer helps when it has been running for a long time without restarting. For me personally, the only option that helps on my laptop is to reset the network settings.

Reset adapter network settings in Windows 10

1. Click on tray notifications.
2. "All parameters".

Select the Network and Internet option.

Go to “Status” and do “Network reset”. Next, Windows will ask you to restart the computer. You can try selecting "Network Troubleshooter".

Reset adapter settings in Windows 7

Start menu "Control Panel">"Network and Internet">"Network and Sharing Center">"Change adapter settings".

Go to the Start menu and click on the gear icon to enter System Settings.

If the above steps did not bring the desired result, then go to the second step to reset the settings and reinstall the components.

Go to Settings again, then Network and Internet - Status. This time, on the right side, scroll down and select “Network Reset.”

A message will appear in a new window that this action will remove and reinstall all drivers on , reset settings (for example, you will need to re-enter the password for the Wi-Fi network), and also return all system components responsible for the network to their initial settings. Confirm this procedure with the “Reset Now” button.

After performing the reset, restart your computer and check that everything works now.

NetAdapter - an alternative method for troubleshooting network problems

Basic problems with the network and Internet connection can often be solved by simple methods - just reinstall the network card drivers, change DNS to Google address, update IP parameters and similar operations. However, all these settings are scattered across various sections of Windows. What if everything was in one place?

Among the available tools here are resetting temporary DNS memory, changing DNS addresses to Google (for example, it helps when the Internet connection is active and pages do not open), cleaning the hosts file (also viewing its contents), updating IP, resetting configuration settings and security, “resetting” network settings, rebooting NetBIOS. It is also possible to use spoofing to change the MAC address of a network adapter. To activate tasks (one or more), select them from the list, and then start them using the button at the bottom of the window.

If a computer running uses multiple network adapters, say an Ethernet connection and a Wi-Fi connection, it uses priorities to decide which adapter to use.

Note: The following guide is for Windows 10, but it should work on previous versions of Windows equally well for the most part.

Windows 10 does a good enough job usually when it comes to picking the right network adapter if multiple options are available. Sometimes though Windows may get it wrong, or you may want to prioritize a different adapter than the one selected by Windows.

Considering that you may have quite a few adapters installed - think Ethernet, wireless, VPN, and virtual machines - you may need to adjust the priority manual.

Change Network Adapter Priorities in Windows 10

You have two options to change adapter priorities in Windows 10. You may either use PowerShell for that, or navigate your way through a series of network interface menus to do the same.

I prefer PowerShell, as it is easier and gives you a better overview of everything. So, let's start there.

The PowerShell Way

First thing you need to do is open a new elevated PowerShell prompt:

Tap on the Windows -key on the keyboard, type powershell, hold down Shift and Ctrl, and click on the Windows PowerShell link that is displayed.

This opens an elevated PowerShell prompt. Note that you may also launch PowerShell from an elevated command prompt window by typing powershell. The screenshot above shows how the interface looks like when done that way.

The first command that you want to run is Get-NetIPInterface. This displays all network adapters, their interface index number, and the interface metric.

The index is a unique number of each adapter, the metric the priority of that adapter. Also, it lists all adapter known by Windows at that point in time.

To change the priority of an adapter, look at the InterfaceMetric column. Windows lists the priority of the adapter, and priorities of all other adapters.

Run the command Set-NetIPInterface -InterfaceIndex “Index of the adapter you want to change the priority for” -InterfaceMetric “new priority of the adapter”.

Example: Set-NetIPInterface -InterfaceIndex “11” -InterfaceMetric “90”

This changes the priority of adapter 11 to the value 90.

Adapters with a lower InterfaceMetric number are prioritized over adapters that have a higher number.

Use the command Get-NetIPInterface to list the adapter information table again to verify the change.

The interface method

If you prefer to use a graphical user interface, you can do that as well. Note that it requires quite a bit of clicking, and is not as straightforward as the PowerShell method.

The main reason for that is that you don’t get an overview of all network adapter priorities in the graphical user interface.

While you can in theory check the value for each adapter individually, this would mean even more clicking and is not recommended. I suggest you run the PowerShell command Get-NetIPInterface to get a reading on those directly.

Step 1 : Tap on the Windows-key, type ncpa.cpl and hit the Enter-key to get started. This opens the Network Connections listing.

Step 2: Right-click on the adapter that you want to modify the priority for, and select Properties from the context menu. This opens the properties window of the adapter.

Step 3: Locate Internet Protocol Version 4 (TCP/IPv4), select it, and click on the Properties button. Note: If your connection is IPv6, select Internet Protocol Version 6 (TCP/IPv6) instead.

Step 4: Locate the Advanced button on the next window that opens and click on it.

Step 5: There you find Interface metric near the bottom. Remove the checkmark from the Automatic metric box, and enter a new custom number. Make sure you select a value of 2 or higher, as 1 is reserved for the loopback adapter.

Step 6: Click ok, and repeat the process for any other network adapter you want to change the priority for.

I suggest you verify the priorities using the PowerShell command used above.

A program for constructing a network map that collects information about network resources such as names, IP and MAC addresses, information about connections, used ports, users, services and other characteristics of the network and its individual components. displays all collected data about the network and its nodes in the form of a visual map, visual plan, in detail and in list form. NetView is a tool for monitoring, analyzing and administering LANs.

Local network map

NetView allows you to visually look at the structure of the local network, draw diagrams and analyze network information. The program includes the following tools: file search, terminal, proxy, connection monitor, network scanner, IP monitor, resource scanner, sending a message, route tracing, Script editor, connecting and disconnecting a network drive.

Plugins

The NetView program supports the connection of additional plugins that expand its functionality. For example, such a lotion as Tray network provides access to NETBIOS resources in the form of a tree menu, and Workstation info creates a list of connected users on hosts. The archive with the program additionally stores 12 plugins useful for network analysis.

Network problems in Windows 10 are a fairly common topic. They do not always occur due to the fault of the operating system; often the cause is incorrect user settings or problems with the drivers of a specific network card model.

How to reinstall the network card and reset settings in Windows 10

If you have connection problems, you can follow the steps below to reinstall the drivers and restore the network components to factory settings.

Go to the Start menu and click on the gear icon to enter System Settings.

If the above steps did not bring the desired result, then go to the second step to reset the settings and reinstall the components.

Go to Settings again, then Network and Internet - Status. This time, on the right side, scroll down and select “Network Reset.”

A message will appear in a new window that this action will remove and reinstall all drivers for network devices, reset settings (for example, you will need to re-enter the password for the Wi-Fi network), and also return all system components responsible for network operation to the initial settings. Confirm this procedure with the “Reset Now” button.

After performing the reset, restart your computer and check that everything works now.

NetAdapter - an alternative method for troubleshooting network problems

Reset adapter network settings in Windows 10

1. Click on tray notifications.
2. "All parameters".

Select the Network and Internet option.

Go to “Status” and do “Network reset”. Next, Windows will ask you to restart the computer. You can try selecting "Network Troubleshooter".

Reset adapter settings in Windows 7

Start menu "Control Panel">"Network and Internet">"Network and Sharing Center">"Change adapter settings".

Open the desired connection. In the window that opens turn off And turn on again.

You can remove the network card driver if the above method did not help. Open the “start” menu, right-click on the “computer” line and click on “Manage” from the pop-up menu.

1. Go to the "Device Manager" line.
2. We look for “network adapters”, open the substring.
3. Right-click on the network connection and select “delete”.

Now we need to install the driver back. To do this, click the “Action” tab and in the pop-up menu “Update hardware configuration”. The driver will install itself. Check if the network adapter is turned on.

Reset Windows 10 WiFi adapter network settings

There is a problem with the adapter; the user cannot connect to the Internet, although he enters all the data correctly. To get started, simply reboot your router (modem). If this does not help, then you need to delete the WiFi settings.

In the Start menu, click on the gear icon to open the application settings.
Click on "Network and Internet", then click on WiFi in the menu on the left.
Click on the right "manage known".

Select the connection and click forget.

If a computer running uses multiple network adapters, say an Ethernet connection and a Wi-Fi connection, it uses priorities to decide which adapter to use.

Note: The following guide is for Windows 10, but it should work on previous versions of Windows equally well for the most part.

Considering that you may have quite a few adapters installed - think Ethernet, wireless, VPN, and virtual machines - you may need to adjust the priority manual.

Change Network Adapter Priorities in Windows 10

You have two options to change adapter priorities in Windows 10. You may either use PowerShell for that, or navigate your way through a series of network interface menus to do the same.

I prefer PowerShell, as it is easier and gives you a better overview of everything. So, let's start there.

The PowerShell Way

First thing you need to do is open a new elevated PowerShell prompt:

Tap on the Windows-key on the keyboard, type powershell, hold down Shift and Ctrl, and click on the Windows PowerShell link that is displayed.

The first command that you want to run is Get-NetIPInterface. This displays all network adapters, their interface index number, and the interface metric.

The index is a unique number of each adapter, the metric the priority of that adapter. Also, it lists all adapter known by Windows at that point in time.

To change the priority of an adapter, look at the InterfaceMetric column. Windows lists the priority of the adapter, and priorities of all other adapters.

Run the command Set-NetIPInterface -InterfaceIndex “Index of the adapter you want to change the priority for” -InterfaceMetric “new priority of the adapter”.

Example: Set-NetIPInterface -InterfaceIndex “11” -InterfaceMetric “90”

This changes the priority of adapter 11 to the value 90.

Adapters with a lower InterfaceMetric number are prioritized over adapters that have a higher number.

Use the command Get-NetIPInterface to list the adapter information table again to verify the change.

The interface method

If you prefer to use a graphical user interface, you can do that as well. Note that it requires quite a bit of clicking, and is not as straightforward as the PowerShell method.

The main reason for that is that you don’t get an overview of all network adapter priorities in the graphical user interface.

Popular

How to delete a page in Odnoklassniki forever or block it temporarily

« Why today do many people wonder how to delete a page in Odnoklassniki? After all, just recently, around social networks, real reigned... »

“Can't connect to iTunes Store”

« As you probably know, the iTunes Store is Apple's online store where you purchase various media content: music, movies, games,... »

Set a password on your computer

« Please note: To follow most of the instructions in this article, you must use a local Windows account with... »