The minimum cost of the application is 300 UAH, which includes a visit by a specialist to the location of the equipment on a date and time period agreed with the client, diagnostics of the receiving system (antenna, tuner, wiring), setting up new parameters of Ukrainian TV channels on ONE piece of equipment OR minimal adjustments an already installed antenna system with the possibility of direct access for the technician to its elements (without replacing components). The final cost of the work is determined by the technician after on-site diagnosis.
How to retune channels?
Satellite television reception is carried out through a tuner. A tuner is a small device connected to your TV. On the front panel of the tuner, find the model name of your tuner. After that, find your tuner in the list of tuners. If your tuner is not on the list, perhaps this tuner model is not very common on the market or is outdated. In this case, we suggest you use the general instructions (text/video), or ask a specialist for help.
How can I cancel a completed application?
Call Telemaster operators at 8282/0800 50 8282 and report this.
I didn’t find the instructions for my tuner, what should I do?
We have posted on the website instructions for the most common models of tuners currently used in Ukraine. Your tuner model may not be on this list if the tuner model is not very common on the market or is outdated. In this case, we suggest you use general instructions (
Or how to set up the TV channel Curlers, Kyiv STB and others yourself.
From March 1, 2017, receiving and viewing Ukrainian satellite channels 1+1, 2+2, TET, PLUSPLUS, 1+1 International, UNIAN TV, CURLERS will be possible only on the Astra 4A satellite. To continue viewing these channels, you need to reconfigure your equipment.
Technical parameters for all channels of group 1 + 1 media (ASTRA 4A):
Satellite - Astra 4A (SES Sirius)
Frequency - 11766 MHz
Symbol rate - 27500
Polarization - horizontal (H)
So, self-configuration satellite channels Ukraine:
1. Click -Menu.
6. In the drop-down list we find the frequency 11766/27500 H, and “OK”.
- Click “OK” to search.
You also need to add and then scan on the Amos 4W satellite, frequency 11175/30000/H, for this:
1. Click -Menu.
3. In the “Satellite” line, select Amos 4w and “OK”. There is no need to change any other parameters.
5. Select, that is, step with the cursor on the line “TP number” and click “OK”.
6. In the drop-down list we find the frequency 11175/30000 H (next cycle: 11140/30000/H), and “OK”. If there is no such frequency, it should be added(green button) and save.
7. Press the red button at the bottom of the remote control to search for programs.
8. A window appears in which you need to set search parameters.
- Search mode - Open or FTA (to search only open programs)
- Scan type - Manual search
- Network Search - On
- Click “OK” to search.
All! Search completed. The found programs will appear at the bottom of the program list in the All satellites folder.
However, following these instructions, we will find a group of programs only at one given frequency. And if the list of programs has not been updated for a long time, I would advise scanning the entire satellite. It's very simple!
For this:
1. Click -Menu.
2. Select “Install” and click “OK”.
3. In the “Satellite” line - select Astra 4.8E, or it can be called Sirius 4.8E (Sirius) and “OK”. There is no need to change any other parameters.
4. To edit, press the yellow button at the bottom of the remote control.
5. Press the red button at the bottom of the remote control to search for programs.
6. A window appears in which you need to set search parameters.
- Search mode - Open or FTA(for search only open source software)
- Program type - TV channel or TV channel + radio
- Scan type - Manual search
- Network Search - On
- Click “OK” to search.
All! Setting up satellite channels in Ukraine completed (for more detailed settings, watch the transponder changes). In this way you can update programs on the AMOS 4W and HOTBIRD 13E satellites.
After scanning, enter the Edit Channels menu and remove unnecessary and inactive programs.
Satellite data transmission technologies can be found in almost every home. Many users believe that installing and configuring satellite TV is a very complicated procedure. In fact, there are practically no special difficulties in all these manipulations. The most important thing is to understand all the most important nuances. How to set up a satellite dish yourself? The answer to this question can be found in this article.
Installation and configuration of satellite television
Satellite television is increasingly gaining popularity among users. Everything here is quite simple, because the subscriber does not always like the list of channels from cable. Yes, and TVs with Full HD quality require high-quality content, which the satellite copes with a bang.
Of course, no one will bother you to connect and install digital cable TV, but the range of TV channels will be several times smaller when compared with what the antenna can provide.
Important! The price of the device does not exceed the cost of cable TV. In addition, you can easily install it somewhere in a country house or country house, which cable TV cannot yet cope with.
Selecting a device
Before installation, you should consider choosing the operator whose services you will use. In other words, we need to choose an antenna. If you are new to this business, then you are in luck, because now we will talk about the nuances of choice in more detail.
So, the whole point of such television is to receive a signal directly from a satellite that flies somewhere in space. The satellite transmits the signal, the tuner processes it, and only then we see the results on the TV screen.
Today we can distinguish both open and encrypted channels. The entire list can be placed separately, or it can be part of a package of channels owned by the operator. TV encoding is only needed to monetize channel viewing. That's why satellite operators exist, making viewing more convenient.
Important! For reference, Russian-language broadcasting occurs from completely different satellites that are located in different positions. To receive a signal without interference, you need to point your antenna directly at the desired satellite. If the selected paid satellites are nearby, then there is a chance that you will be able to receive a signal from both at once.
Here are some important points:
- If you would like to watch 30 free paid channels in Russian, then point your device at the satellite called “YAMAL 201”. There are many other satellites, but “YAMAL” is the best filled.
Important! If we are talking about choosing an operator, then it is best to give preference to Tricolor-TV, NTV-Plus or Raduga-TV. More information can be found on the official websites of operators.
- One more point needs to be highlighted: do you need paid or free broadcasting? To find free content, you can use the special service Frocus.net. To connect paid channels use the official websites of satellite operators.
Important! There is good news for owners of widescreen TVs - some operators have already started broadcasting in HD quality.
- There is one more nuance - the direction of the antenna towards the satellite. Everything here will depend only on the location of the device. The windows in your apartment may face the wrong direction, so you will have to place the installation directly on the roof. If the chosen direction cannot be reached for some other reason, then you should choose another satellite.
In order to install a satellite dish yourself, you need to be well prepared. Now you will find out exactly how.
Preparing for installation
If you have already decided on a satellite, equipment and operator, then you can safely run for a new purchase. In order not to swim in terms, let's talk about all the components that will be included in the kit.
What is included?
- A tuner (receiver or receiver) is a device that receives a signal and converts it for subsequent viewing on TV.
- Dish (antenna) - this device is needed in order to receive a signal from a satellite. The waves are reflected from the plate and run into the convector.
- Convector. This gadget is responsible for receiving the signal that the plate reflects. The convector itself redirects the converted signal to the tuner.
- A bracket is a metal structure that secures all equipment.
- Cable is a special coaxial conductor connecting the convector and receiver.
- DiSEq is a special device that is necessary to connect several convectors into one cable.
- F-ki. Using these devices, the cable is connected to other components.
- Well, a basic set of connecting wires: tulips, SCART, HDMI cable.
Before you take on satellite TV yourself, let's talk about all this equipment.
Plate
When choosing a plate, you should only look at its diameter. For good reception, 90 centimeters is enough. But those who are going to receive signals from several sources at once should take into account the dependence of the diameter on the degree distance between the satellites.
Convector
Everything here is not so simple either. The polarization of the convector depends on the satellite. Here you should not neglect the advice of a specialist.
Important! Those who plan to watch both on TV and on a personal computer at once should acquire a convector with two outputs.
bracket
This design is quite simple. Usually it is supported by 3-4 anchors. Choose a bracket with a length of legs that will allow you to easily rotate the antenna in the desired direction.
How to set up a satellite dish yourself? Here we come to the answer to this question.
Installation procedure
All assembly follows the included instructions. In order to finish what you started, you need to follow these tips:
- Choose the correct direction of the plate. A special service agsat.com.ua/satdirect will help you with this. On the map, you just need to click on the installation location flag, and select the desired satellite in the side column of the interface. The software will point you in the right direction.
- Before installing the dish, it is better to check the quality of reception without fixing it, holding the device in your hands. If satellite reception is at least 70 percent, then you can proceed to installation.
- If you have selected and determined the installation location, then take a hammer drill and make holes for installing the bracket. The anchor must be selected based on the wall material and the massiveness of all the equipment.
- After securing the bracket, we begin to secure the plate. Take your time tightening the nuts as you still need to set the exact direction.
Installing a satellite dish yourself should now not raise any questions, but how to set up and connect all the equipment?
Connection
In order to connect everything, you need:
- We cut off about 1.5 cm of insulation from the cable and bend its braid in the opposite direction. Cut the foil screen by 1 cm.
- Screw the F-piece onto the prepared end of the cable.
- We repeat the manipulations with the other end and connect it to the receiver. The first end must be connected to the convector.
Important! After fixing and connecting, you need to adjust the dish to the satellite. For accuracy, it is better to use a compass and the signal level in the tuner. If you manage to achieve excellent reception quality, then fix the nuts on the antenna and its fasteners. Then we fix the cable itself.
Tuner settings
- Select your language from the tuner menu.
- Compare your firmware version with the latest one.
- Set the correct time and time zone.
- Select the desired satellite and fill out its settings.
- Now display the signal level on the display. If the quality is at the proper level, then start scanning the satellite, which will give you access to TV channels.
Now you should have no questions left about how to set up a satellite dish yourself and connect it. And if you do everything based on our advice, you are guaranteed high quality TV with a wide range of channels!
Subscribe to news
TV channel 1+1 and all channels of the 1+1 media group change broadcast parameters from the satellite. Or more precisely, they change the satellite and switch from AMOS-2 4 W to satellite ASTRA 4A 4.8 E.
TV channels 1+1, Unian, PlusPlus, Kvartal TV And Curlers already available from satellite ASTRA 4A 4.8 E and broadcast in test mode until December 12 (extended until March 1), and after that on an ongoing basis. But on Amos 1+1 will be available until February 15, 2017. Later, the media group's broadcasting will completely switch to Astra (formerly Sirius).
New satellite parameters and frequencies for tuning the 1+1 (1plus1) TV channel and the entire media group
Broadcast parameters 1+1
Satellite ASTRA 4A 4.8 E
Frequency – 11766 H 27500 3/4
11766 MHz, horizontal polarization, symbol rate 27500 Mbit/s, FEC–3/4, DVB-S/QPSK
The change of satellite and broadcast frequency is associated with the end of the satellite’s service life AMOS-2.
Some TV channels have already migrated or are currently broadcasting from two satellites.
You can also look at the broadcast parameters of previously migrated TV channels.
The information was officially confirmed by the executive director of the media holding and the 1+1 TV channel is already broadcasting a video about the change in satellite broadcasting.
StarLightMedia is moving to another frequency.
Also important news for TV channel viewers STB, ICTV, Novy channel, M1, M2, QTV which in 2017, from March 1, switch to a new frequency from the Amos 2 satellite to Amos 3. And thus remain on Amos.
New TV channel broadcast parameters STB, ICTV, Novy channel, M1, M2, QTV
Amos-3, 4W
11175 H 30000; 3/4
Also, all TV channels inform about changes in broadcast parameters from the satellite and many are sent via the link telemaster com ua (telemaster com ua). Where text and video instructions are provided for reconfiguring channels yourself or searching for a specialist in your region or locality.
If setting up channels is a difficult task for you, then it is better to contact a specialist. This will be more reliable and of better quality.
Soon the Ukrainian TV market will be replenished with one more TV channel. We are talking about the “Curler” TV channel, which is intended specifically for the fair half of humanity. As you know, the TV channel will be created on the basis of another channel - Real Estate TV. This decision was made by the company “1+1 Media”. And at the next meeting, the National Council of Ukraine on Television and Radio Broadcasting plans to approve changes to the license of the Real Estate TV channel, which are being introduced by the broadcaster itself. Curlers TV is an entertainment channel that will provide the female audience with a huge number of interesting and exciting films and series.
Real Estate TV is an information and entertainment channel that focuses on construction topics. It broadcasts unencrypted from the Amos 2 satellite (4°W) at 10.806 GHz, Pol. H, SR: 30000, FEC: 3/4; DVB-S/QPSK. According to preliminary data, the channel will broadcast only within Ukraine and its signal will be encrypted.
The TV channel is planned to broadcast from January 13, 2014. The main content of the channel will be foreign and Ukrainian series, as well as materials of its own production, which are aimed primarily at the female part.
Elena Tovstenko has been appointed general producer of the channel.
Like she said Ukrainian TV viewers are provided with a sufficient number of men's TV channels, but the women's niche has not yet been occupied. As you know, women tend to spend more time watching television. Therefore, the “Curler” TV channel was created in order to satisfy women’s desire to watch TV series. The creators of the channel want the female audience to feel cared for, experience joy at the same time as the characters in television series, true feelings, happiness and receive only good emotions from life.
Alexander Tkachenko, who is the CEO of 1+1 media, added that The TV channel will be an excellent addition to the group’s line of channels and will be able to win the interest of the majority of TV viewers.
Loading...
