On this moment satellite television is a wonderful alternative to ordinary UHF antennas and cable channels. In terms of price, they are actually no different from each other. On the contrary, put the dish down and you will find dozens of channels that you can watch for free without any additional subscription fee. WITH cable TV this won't work.
Instructions
1. In any case, you will have to pay a certain amount of money monthly. There is no need to talk about UHF channels at all - they only catch the most famous state channels. The exceptional difficulty lies in setting up the satellite dish and the receiver, which is responsible for receiving the signal. Also, if you have a few free channels, you can try to decode paid ones. In order to decode satellite channels, you need to have certain skills and knowledge. Before everyone else, it is worth noting that there are a lot of signal encoding systems, such as Viaccess, Nagravision, Cryptoworks, Irdeto 2 and many others.
2. It is worth understanding that especially famous satellite channels have fairly solid protection against hacking their encoding. If you still decide to hack them, find special keys on the Internet, after entering which you will have access to the most famous encrypted satellite channels.
3. Also on the vast expanses of the Internet you can purchase special access cards. Don't worry, they are cheap. For a few bucks, you'll get unlimited access to the world's biggest entertainment, news and sports channels. The final method is especially optimal for many users of satellite dishes, because there is no need to purchase keys to one or another information encoding system. There are a lot of sites where you can find such cards that include different tariff packages of TV channels.
4. If you yourself are not able to detect and decode the most famous frequencies of satellite channels, seek support from experienced specialists who have been decoding signals for many years and will help you solve your problem. Of course, similar services cost some money. But believe me, it’s worth it, because in the end you will get a wide range of thousands of TV channels, where you, most likely, will be able to discover the channel for yourself, while watching the one that you will receive unimaginable aesthetic pleasure.
Decoding satellite channels using the tuner menu is no longer relevant and dangerous for you - illegal ways of watching channels are now quite easily recognized by television providers and, at best, are suppressed, and at worst, they can lead to serious troubles. However, if you want to take a risk, no one is stopping you.
You will need
- - Internet access;
- - remote control;
- – channel codes;
- – tuner.
Instructions
1. Search for keys to access specific channels you want to unlock on your tuner. Pay attention to the demand for information; data may change over time. The best option in this case, you will register on a special thematic forum with excellent attendance, where you can not only get access to the keys, but also learn about the operating features of this or that model of satellite equipment.
2. Download the firmware program for your tuner model, which provides for the appearance of a special emulator after its installation, prepared for entering keys from the remote control remote control. Also, be sure to consider the features of the process of flashing your equipment, since they may differ depending on the manufacturer.
3. Copy the downloaded unzipped files to a removable USB drive, and then be sure to check it for viruses. Insert it into your tuner and run the update software from the service menu.
4. Please note that some models require disconnecting additional devices from the tuner; always carefully read the instructions on the download page or in the Read Me.txt file included in the program archive. Wait until the device is flashed and then rebooted.
5. Turn on the tuner and go to the emulator program that appeared after the flashing. Enter the keys of the channels you want to decode. Please note that it is always better to use legal methods of acquiring access to watch channels. Pay the bill for using the services and do not use any emulators or dongles. Also pay attention to tuners using the sharing function.
Video on the topic
Despite the energetic struggle for viewers on central television channels, it is traditionally during the rarest hours of rest, as usual, that it is virtually unthinkable to choose something exciting or educational. If you are also a resident of a small city, then the choice of channels is limited to 6-7, and in some regions even 1-2. What should I do? Prefer and install a satellite dish!
Instructions
1. Choose a satellite dish, considering the size of the parabolic mirror, and the purchasing power of your wallet. With everything added to the diameter of the plate, the cost of it and the costs of installation work increase.
2. Antennas made of steel are considered especially strong and least long-lived, and they are especially advantageous in terms of price-quality ratio. If you can afford a more expensive and high-quality option, choose an aluminum plate. Mesh or plastic antennas may not withstand the influence of winds, so take into account the degree of exposure of the satellite dish to gusty air flows that are frequent in your area.
3. Inquire about the reception quality of the selected antenna. There are not many options here: offset or direct focus. The first one is more comfortable to install because it does not require a strong tilt, suffers less from natural phenomena, and the converter on such an antenna does not create interference when receiving a signal. With direct focus reception, the signal quality depends on the diameter of the dish.
4. Select the satellite that is suitable for your area. The rotating antenna option should be chosen only if you want to watch channels from not one, but several satellites. This option will also affect the cost of the satellite dish.
5. Think about the fact that rotating mechanisms can become capricious in the cold, and that they should be protected from rain and snow, which means installing the antenna under a canopy - the signal quality will decrease. Opt for a standard metal mount. It is enough to install several converters in order to receive signals from several satellites without changing the location of the dish. Invest in a special device that switches converters.
6. Connect the satellite dish to the TV using a regular cable with a resistance of about 75 ohms. Between the antenna and the TV, as mentioned above, connect the receiver, use an ordinary linear input.
7. Check out the equipment and channels offered by licensed sellers. Buy a card to watch channels from any satellite television provider. Order installation of the dish and connection of equipment also from experts, do not skimp on quality.
8. Enjoy the huge variety of TV programs available to you from the moment you install and connect your satellite dish.
Video on the topic
At this point in time in the modern world, special information technologies make it possible to encrypt information. There are also programs that can decode the data. Data decoding allows you to run games and programs. For example, the ExeLab TextCoder program provides encoding and decoding of documents and other files. Without knowing the password, it is impossible to find out the information stored there.
You will need
- PC, ExeLab TextCoder program
Instructions
1. In order to decode or encode data, download a special program ExeLab TextCoder. Install it on your computer. Launch ExeLab TextCoder. The Main Window will appear. For encoding, enter text in “Window 1”. It's on the left. Click “Typical text” and encrypted information will appear in “Window 2”.
2. To decode, enter text in the “Window” and click “Decode from UTF8”. You will get the original text.
3. The TCODE program can be used for decoding. It helps to restore text. TCODE can be downloaded from the Internet. Install it on your computer and run it. The main window opens. Enter the required text and click “Recode”. As a result, 100% recognized information is displayed.
4. The data is also recognized by the Stirlitz program. Download it from the Internet and load it onto your computer. Opening it, you will see a window. There is a toolbar there.
5. Open the File. Find the “Open” item and select the required file.
6. In the “Edit” column, select “Decode”. You will get encrypted text. The types of encodings are located in a row on the toolbar. You may prefer either one.
7. To decode the data, do the same. Click “Decode” and the result is text in Russian. You can immediately print information from the Stirlitz program. To do this, select the “Print” column in the File and that’s it.
If you bought a satellite dish, then you need to take everything possible and unthinkable from it, that is, the highest number of channels. Satellite television owners are trying to do everything to get customers to pay for their services. Of course, one can become aware of them, but the reality is that one has to adapt to the conditions of survival. As usual, the most exciting ones channels turn out to be unattainable. In addition, the well-known rule applies here: forbidden fruit is sweet. This is precisely why everyone is so anxious to decode encrypted satellite signals. channels .
Instructions
1. The most primitive and correct option for unblocking a satellite TV channel sounds, admittedly, funny. Just take it and pay in good faith for the services of this channel. In such an environment, all programs on it will become available, and you will sleep peacefully, knowing that your conscience is clear.
2. However, everyone knows that the cost of watching foreign TV channels is often too high, so resort to a further decoding option. Buy an emulator card that allows you to view encrypted satellite channels. In most cases, such cards are made in pirated conditions and also cost money, but, perhaps, this option will cost you less.
3. Outwardly, emulator cards are similar to ordinary telephone cards. Using them is very primitive: load the program for working with the tuner into the card's processor from a computer, and load the firmware containing codes from foreign providers into the card's memory. All foreign providers release packages for a certain number of channels. To open the map, enter the special channel code. The card can fit from 16 to 40 channels, it all depends on its type and encoding version.
4. In order to update the encoding and, accordingly, increase the number of channels, you can reflash the card, but it would be better to buy a programmer, one that will solve all the problems with the update. Also look for high security trading cards in stores. They will cost a lot, considering that you will also have to purchase a programmer. But it's up to you.
5. Another option is to decode satellite channels– sharing. Today this is one of the most inexpensive methods to watch your favorite channels. To do this, purchase one official card and connect several subscribers to it at the same time. This way, you pay for the channel, but only a certain part, and not the whole amount. The provider, of course, will not appreciate this, but you, as viewers, will be comfortable.
A satellite dish makes it possible to receive not only television signals, but also Internet packages, as well as DW keys, which are necessary when decoding channels. Hacking encoding systems is punishable by law in many countries, so in order not to violate the law, you can use special plugins that can only open BISS and Cryptowork encodings. It is currently impossible to open other systems, but there is another method for viewing the encoded signal.
You will need
- – DVB card;
- – ProgDVB program;
- – s2emu and MD Yanksee plugins;
- – csc plugin 4.0.0.4.
Instructions
1. Install a DVB card like Skystar 2 into your PC. This satellite tuner allows you to view both TV programs on the monitor and record them. In addition, it also accepts Internet packages. Download and install the ProgDVB program on your computer. At the moment it is especially trouble-free in operation.
2. Download the s2emu and MD Yanksee plugins. With their support, it is possible to decode only channels in Cryptowork and BISS encoding, but they will not accept Nagra, Viacsess 2.5 and higher. Install them in the ProgDVB root folder. Set the satellite dish to the desired satellite. Turn on the ProgDVB program. Yanksee and s2emu should appear in the “Plugins” folder. Scan the transponders on the satellite and save the channels that appear. In the ProgDVB program they will be in the left column. Open or FTA channels will be marked with a green “eye”, and closed ones with a “red” eye. Click on open channel, it should start showing in 1s. Click on a closed TV channel, it will appear in 2-3 seconds, if this does not happen, then check what encoding it is broadcast in. You can check this on the website www.lyngsat.com. If everything matches, then download and install the “fresh” keys into the ProgDVB folder. For the Ynksee plugin, you can enter them manually through the TV viewing program interface.
3. Connect car sharing. This is semi-legal viewing of encrypted channels. It is not persecuted in our country. This special technology allows you to watch closed channels by emulating a legal access card with the appropriate program. To do this, install the csc 4.0.0.4 plugin on your computer. to the core of the ProgDVB program. Move the msvcr70.dll file to the \WINDOWS\SYSTEM32 folder. Turn on the ProgDVB program, and the CardServer Client item will appear on the “Plugins” tab. Connect your computer to the Internet, it can be ADSL, Wi-Fi, GPRS, etc.). Consider also that this viewing paid, approximately $3 per month.
4. Select and register on the map sharing server via the Internet. to you at email You will receive connection information. Enter new values in the csc 4.0.0.4 plugin by opening the CardServer Client Configure Server item in the “Plugins” menu: login; Protocol – newcamd525; password; connection port; IP address or server name; des key. You can save the values by clicking the Add Item and then Save Configuration buttons. At the moment, using this method you can watch virtually any TV channel.
5. Pay for car sharing, traditionally via internet money. According to the channel package, tune the antenna to the satellite. Scan the transponder and save channels. Click on one of them, it should start broadcasting in the viewing window. If this does not happen, then go to its properties, double-click in the window on the required CA type (ID) (given upon connection) and click “OK”.
« Yamal"is one of the most famous and relevant satellites television broadcasting, the one that transmits the signal of many Russian channels located in open access. For settings satellite dish It is not necessary to invite experts to Yamal. You can do this yourself.
You will need
- – antenna;
- – receiver;
- – building layer;
- – protractor;
- – plumb line.
Instructions
1. First, assemble and install the antenna. Install its stand strictly vertically. To do this, use a building tier. If the antenna has a ring, then it should also be placed horizontally.
2. Calculate the angle at which the satellite is visible. The elevation angle is the tilt at which the antenna faces the satellite vertically. With the support of a plumb bob and a school protractor, install the antenna mirror. City coordinates can be found on many sites on the Internet.
4. Write any word in the name of the satellite. There is no need to insert a depolarizer into the converter, because it is not known in what location it should be. A powerful transponder can be received without it. Then click OK.
5. Enter speed 28000, transponder frequency 3645, FEC ? and click OK again.
6. The receiver will try to detect channels but will not find them. This is necessary in order to create a digital signal quality scale and a scale that measures the analog tier. In some receivers you need to press the Exit button, go to the terminal parameters and find the signal control. If the antenna is not tuned to the satellite, both scales will show.
7. Now smoothly rotate the antenna in azimuth. As soon as it hits the satellite, the analog tier will begin to grow, and quality will appear on the 2nd scale.
8. Adjust the antenna vertically and horizontally to achieve the maximum acceptable signal quality. Next, find a list of Yamal satellite frequencies on the Internet, set up the terminal and enjoy your favorite channels.
Note!
When choosing an antenna, it is better to give preference to Russian production, because Chinese segment antennas have crappy mirror geometry and only work at 20% in the Ku band.
Helpful advice
To tune the antenna, it is better to have an ordinary signal indicator rather than a receiver. With his help, you will find the satellite faster. Don't forget to insert a depolarizer after setting up the antenna, because it gives the signal gain by a factor of two.
Video on the topic
08/20/2017 08/30/2017 by Eve
Principle of operation satellite kit is as follows: the encoded signal first enters the convector, where it is amplified at a certain point and fed to the tuner. Then, the operator's smart card with the key decodes the incoming signal, and the tuner, in turn, displays the image on the screen.
Decoding using a tuner is the most in a simple way, allowing you to watch premium channels in excellent quality absolutely free.
In order for decryption to be successful, you will need:
- Satellite TV system, including: satellite dish, cable, convector;
- Tuner with remote control. After you are convinced that the entire system is working, you can begin decryption. First of all, you need to enable a free unencrypted channel, after which, go to the tuner emulator.
Using the remote control, you need to select an item to enter a combination consisting of 4 digits.
After accepting the code, a panel with settings should appear on the emulator screen. Using the remote control, select the last item “KeyEdit”. You should see the “Edit Code” tab. Select the encoding type – “BISS”.
- Now you need to go to the “BISS” item. If you have not added keys, the display on the screen will be blank. If you already have a key, then you can not download a new one, but update the old one: select from the list of all codes exactly the one that you have not used yet and click the red “Edit” button.
- In order to add a new key, you need to press the green “Add” button on the control panel, which is located at the bottom of the display. To add a channel key, you need to know the channel frequency, code, and ID number of the channel itself. If you do not have this information on hand, you can always look it up in the general BISS list.
When you open the “Edit Code” form, a table with fields will appear on the screen. Click on the selected column, after which you will see the following columns in the table: CAID, ServId, Freq, Type, KeyData.
ServId – denotes channel ID;
Freq – indicates the channel frequency;
KeyData – the key itself is entered in this column.
Please note that the CAID column remains unchanged!
IMPORTANT INFORMATION!
In order to enter the letters of the code in the column, use the P and P+ buttons, which are located at the bottom remote control management. You can also select letters using the electronic keyboard.
Be sure to save the completed information by clicking the “OK” button.
To return to the main “Menu” of TV settings, press the “Exit” button.
What to do if there is no encoding in the listBISS?
If there is no BISS type encoding in the general list of the “Edit Code” tab, then you can select the one that already has a key. In order for the key to work, you need to indicate the number 2600 in the CAID column. Thus, by editing the old key, you will gain access to paid channels. Save your changes by clicking the OK button or the green key.
How to decode a channel if it hasBISS-encoding?
Satellite TV operators, in most cases, have encrypted channels for which you need to pay subscription fee. But what to do if the list of free channels does not suit you and you want to watch more without paying?
BISS-encoded channels can be decoded, but to do this you need to understand how the entire system works.
So, you will need: a complete set of satellite television (dish, convector), as well as a satellite tuner that supports the required format (HD, HDTV, etc.).
First of all, you need to go to the “Menu” of the channel that you want to decode. An “Information” window with channel data will appear in front of you.
Using the remote control, open the "BISS" window. You can press the red button or use the buttons to scroll through the lines.
The “Edit Code” window will appear in front of you. All values in the “KeyDate” column will be reset to zero, so you need to enter the key. Save the code changes by pressing the "OK" button on the remote control. In order to edit or change the code again, you need to go into the tuner's memory.
Today, Tricolor TV is considered one of the leading companies on the Russian market.
For several years, satellite television has been introducing modern and innovative technologies to provide High Quality and clarity when viewing both European and Russian channels.
On at this stage, multimillion-dollar subscribers can take advantage of additional services. But there are situations when the channels are encrypted and, accordingly, Tricolor TV clients cannot find out the reason and reconnect the connection.
For this case, experts have prepared an article that carefully indicates step by step actions. In fact, this process can be done at home without unnecessary problems.
Accordingly, the company disables access to viewing and encrypts one or another channel, sometimes even several.
Modern satellite television offers customers a fairly expanded package. The cost of services starts from 6,000 and reaches 12,000 rubles, depending on the selected package. Many citizens of the Russian Federation cannot afford to pay such a large amount.
Therefore, they are looking for alternative ways to decode channels for free. Basically, some people use special programs that help hack the receiver. However, it should be noted that this virus, may harm the TV and the entire system.
The legal way to decode channels for free at home is quite simple and easy. On the official website http://accounting911.info/files/kodyi-trikolor-tv-besplatno.htm you need to download Tricolor TV codes, which were created specifically for decoding channels. After installation special file, you must agree to the terms and activate the utilities.
In some cases, the following message “Coded channel Est” appears on the screens. This indicates that the equipment set was recently installed or the equipment was displaying channels in automatic mode.
When installing a set of equipment, you must register all channels. In order to complete this process, you must go to the registration section on the official Tricolor TV portal. You can call the indicated phone number and the operator will help resolve your problem.
After completing this stage, activation keys are sent automatically within eight hours.
Accordingly, all channels are decoded within the specified period. It is necessary to take into account the fact that first of all, the antenna is installed and configured, and only after that can you register on the official website of the Tricolor TV company.
When you pay for a subscription, the service will be activated after a while. In some cases, funds are credited to your personal satellite television account.
Therefore, to check the status, you need to go to the section personal account and specify the appropriate package. After which the operator will connect certain channels automatically.
There are often cases where keys are lost. This only happens if the receiver has not been connected.
Accordingly, you will need to connect the equipment for a while and leave it turned on. After which the channels will be encrypted and connected automatically. This process will take approximately eight hours. The activation command can also be executed on the official portal.
Channels are often scrambled due to an outdated receiver model. The receiver freezes. In this case, you will need to change to a new model in order to decode the channels and gain access to viewing.
Whenever additional questions, you need to call 88005000123.
An operator who works around the clock will help resolve the situation and answer all your questions.
How to decode satellite channels.
Short description
Viaccess 2.3.
Channels encoded in the Viaccess 2.3 encoding system
The coding system has long been hacked, the codes are posted on the Internet. In this encoding, the Eurosport channel with a Russian soundtrack and many other channels are closed.
But don't rush to rejoice. The cunning French, namely they who came up with the “Viaccess” coding system, found an opportunity to improve the old coding. Another one is applied to the existing encoding system - “TPS-Crypt” (Mask). This “disgrace” works in this way - a bunch of identifiers are thrown into the stream along with the signal, and the receiver cannot decide which of them is real.
Long "AEC" keys help to calculate the real channel ID and it opens.
"AEC" keys are also posted on the Internet. Even the sequence of their use is known, but they are replaced too often.
Currently, anyone who has a receiver with an emulator and wants to watch the "TPS" (Multivision) channel package must enter new codes every 20 minutes.
Viaccess 2.4
Channels encoded in the Viaccess 2.4 encoding system
The coding system has been hacked, the codes are posted on the Internet. There are not many channels left using this encoding. Of greatest interest are Perviy Baltijskyi kanal Estonia and RTR Planeta.
Viaccess 2.5
Channels encoded in the Viaccess 2.5 encoding system
A lot of interesting channels are closed in this coding system, including the RTV channel package (Our Cinema, etc.), the NTV-Mir channel and many others.
The most interesting thing is that there are persistent rumors that this coding system has been hacked. It seems that they are now looking for a buyer for the results of the hack, and maybe this year an illegal card or module that opens channels encoded in this encoding will appear.
This will be a sensation, a big victory for TV pirates and a barrel of balm for the tormented souls of the “freeloaders”
Viaccess 2.6
Channels encoded in the Viaccess 2.6 encoding system
As far as I know, with this coding system everything is still “deaf.” Probably all channels will be “sprayed” on this encoding when they smell something fried on “VIA-2.5”
Viaccess 3.0New version of encoding. Everything is quiet with her so far.
Betacrypt
Channels encoded in the Betacrypt encoding system
This encoding system has long been hacked and currently people illegally watch the channels remaining in this encoding, for example, the Austrian channel package ORF Digital.
If you look at the general list of channels closed by this system, then “the soul rejoices.” But don't be fooled. Illegal viewing of most of these channels is not possible. The so-called “tunnel” coding system has been introduced.
In order for “ancient” receivers like “D-box1” to recognize a card with a new encoding, the outer shell of the encoding remained from “Betacrypt”, and the insides were stuffed with the “Nagravision” encoding system.
This monster was called "Nagravision 2"
Nagravision 2
Channels encoded in the Nagravision 2 encoding system
Lately there has been a lot of noise about “hacking the Nagravision 2 encoding system.” But this is not entirely true. By “hacking” we must understand that the encoding algorithm is known and the provider has almost no ability to fight it.
In this case, the situation is different. It would be more correct to talk about “hacking” one of the versions of the official map.
A group of Spanish hackers found an opportunity to read information from one of the modifications of official cards. Such cards were used for both the Spanish version of "Nagravision 2" (Armageddon) and the German version of this encoding system "Aladin". Even some of the official maps on Polsat were made based on such maps.
This information was sold to manufacturers of illegal cards, and they quickly started producing all sorts of “serebryanki”, “felt boots”, etc.
Brief viewing of many channels on some receivers with emulators was possible because the manufacturers of illegal cards squabbled over the market. One of the parties, to spite its competitors, threw the keys onto the Internet for all three large packages of channels encoded in "Nagravision 2".
The providers responded quickly, the exposed keys were replaced and the exchange of old official cards began. It is especially difficult for the German Premiere - they only need to replace 3.5 million official cards at the first stage.
Now the manufacturers of the Diablo CAM module also have the necessary information. With this thing, as with illegal cards, illegal viewing of closed German channels is also possible. A funny situation - “a thief stole something stolen from a thief.” They say that the “devils” stole from their competitors the information recorded on their illegal cards.
According to unverified information, hackers have found a way to get close to the latest modifications of official cards (ROM-122).
This is a disaster for the developers of the "Nagravision 2" encoding system and the providers using this encoding. Illegal viewing of these channels will be possible for a long time, and 17 million official cards are subject to exchange.
Nagravision 1
Channels encoded in the Nagravision 1 encoding system
The coding system has been hacked, the codes are posted on the Internet. Spanish channels from the Hispasat 1C/1D satellite encoded in this system are of some interest.
Cryptoworks
Channels encoded in the Cryptoworks encoding system
It looks like this coding system has indeed been hacked. True, keys did not appear on the Internet for all channel packages. Maybe there are some modifications to this coding system, or this is due to some economic considerations of hackers. Two porn channels, Hustler TV Europe (PG) and Blue Hustler Europe (PB), are of particular interest.
With a Russian soundtrack there is the channel "Romantica 2", with its endless series, and Jetix Central & Eastern with children's cartoons.
It is now possible to view the Austrian package of "ORF" channels encoded not only in "Betacrypt", but also in "Cryptoworks".
Videoguard Channels encoded in the Videoguard encoding system
There are rumors that illegal cards may soon appear that open channels for Viasat and Sky Italia packages
A package of Russian-language channels "Viasat" would be especially interesting.
The “case” is probably not simple; even the original card for this package only works with the receiver on which it was activated.
Irdeto 2
Channels encoded in the Irdeto 2 encoding system
Maybe wishful thinking is being passed off as reality, but there is information that the coding system has been hacked and currently looking for people willing to buy the results of hacking. Card and module manufacturers usually show interest in such matters.
A powerful incentive for “tinkering” with this coding system will be the transition to “Irdeto 2” of the Stargate channel package.
Mediaguard 1 (Seca)
Channels encoded in the Mediaguard 1 (Seca) encoding system
Some channels closed in this coding system have codes on the Internet. The Super 1 Music channel is of some interest. Until 11 pm it is a music channel, and from 11 pm to 4 am it is a porn channel.
Channels encoded in the BISS encoding system
This is the "hardware" version of encoding. A small software installed in the receiver or module, if there are keys, provides channel decoding. The length of the keys is not long; it is possible to calculate them by simply enumerating the options. On one of the Russian forums there is a group of enthusiasts who click these codes like nuts.
There are codes on the Internet, with some receivers that have an emulator, it is possible to watch channels such as Megasport, 1+1 International, M1 International, Stolicnoe TV, Rossiya, etc.
Rosscrypt
The Russian encryption system "Rosscrypt" has not been hacked. It was developed back in the 70s in the USSR in one of the secret “research institutes” of the State Security Committee, and is only being put into operation at the present time.
The size of the key block is 64 bits, which means that an attempt to select codes by simple brute force is a “dead number”.
Of the encrypted channels, the most interesting for us is Perviy kanal, broadcast from the Express AM1 satellite. To officially view this channel in Russia, the sale of the corresponding CAM module is organized.
Z-Crypt aka DRE-Crypr
Encoding used by the TricolorTV project (). The decoding module is built directly into the DRE-4000 receiver. No subscription card required. This is the only receiver for watching 3TV.
According to a number of reports, the encoding with the code name Z-Crypt was developed here in Zelenograd, according to a number of others - by Digi Raum Elctronics (DRE), a manufacturer of receivers.
The encoding has not been cracked, and if it has been cracked, then no one shouts about it widely - everyone wants to live [without problems]...
CryptoWorks is a system for protecting against unauthorized access.
This system has been in use for over 10 years. The system is based on the principle of protecting banking systems, satellite and cable communications. The company also has 45 years of experience using similar systems for military purposes.
CryptoWorks is currently used in DTH live broadcast systems.
The system, for example, provides control of such a delicate function,
as PPV (Pay-Per-View) - pay-per-view.
There were real cases of hacking, but now there are no keys for it. Some porn channels are also encoded into it....
Neotion SHL, Dreamcrypt, KeyFly, Firecrypt
These encodings usually use porn channels so that the user can open them using conditional access modules (CAM) or special receivers, for example NEOTION BOX, which automatically has a built-in subscription to the porn channel SEX VIEW XXX
The most powerful and complex encoding. It was invented in the USA and is mainly used for military or cable networks. For her, the receiver costs more than $1000. It’s even more difficult here than even in Videoguard. For example, the AFN package with HOT BIRD is broadcast in this encoding; this package is specially made for military personnel from the United States who arrive outside the country. The only open channel in this package is Pentagon TV, the American propaganda channel, but it’s funny - you can watch it for fun. Like absolute coordinates) ... decode, decipher, decode decoder, ... multiplexing, multiplexing channels communications, multi-channel transmission... satellite TV satellite television satellitic...
J. J. Hurtak Book of Knowledge: The Keys of Enoch The Teaching Given on the Seven Levels
DocumentEncoded in the Pyramid, there is satellite change reflecting the development of consciousness... the world, like channel Light for people too How channels pass into you... through the work of Melchizedek perhaps correctly decode and code the chronometers in...
The third part of the great Book of Life novel by Mnokrator
DocumentNumbers, they called Moscow on satellite communications, informed in Aesopian language, ... with its help it is incredibly possible decode a signal imprinted in a drink of... kind. Like How are burned at the moment of energy peak channels. Hourglass...
Study guide Penza IIT PGU 2012 contents
Control questions... what- image. The presence of the sign makes it possible to transfer information via technical channels... could be encoded and decoded. On the process of interpretation, ... information. Thanks to television satellite communications, computer systems events...
This article is for informational purposes only, its purpose is to dispel
many myths and prejudices regarding satellite encodings, as well as to
calm down (or increase anxiety, depending on how you look at it) those who are especially nervous
citizens and show that most encodings can be broken without leaving the chair, it was
wish.
What will it entail: Legislation Russian Federation in this matter has
ambiguous interpretation, because Most scrambled, pay TV channels are not
have the legal right to broadcast on the territory of the Russian Federation (and therefore view
illegally broadcast channels should not entail anything), for
with the exception of NTV+, fortunately their system is not vulnerable to the presented techniques (if
If you don't think this is fortunate, then look here -
http://www.fips.ru/avp/law15.htm), so apply this knowledge to your
conscience, well, and on the conscience of the sluggish administrators responsible for
channel security. But anyway, watch paid channels for free –
This is against the law and I do not recommend you do this.
Instructions for use
Install, figure out why it works, make sure it works, do it
conclusions and delete everything.
What we need:
- ProgDVB- truly a legendary program, what has never happened
written on its basis, which plugins have not been released... convenient and
well made, supported and updated very often, free
and bug-free. Fairy tale? No, it's true, miracles do happen, especially if they
believe 😉 you can take it from
gentlemanly
grabber set.
MD Yankse 1.32.1 TT– a plugin that allows you to observe
dynamically (through your monitor) how the keys are selected (more precisely
they will say they are being substituted), it is interesting that there is Russification.
In fact, there are other similar programs (S2emu, CAPi, EmuNation, vPlug,
PSoftcam, Card Server Client (CSC)), but it seems to me that it is the most
convenient and understandable. You can get it from here:
http://www.dvbskystar.com/download/click.php?id=9 – if you have WinXP or
from here
http://www.dvbskystar.com/download/click.php?id=10 – if you have Win98,
There is no option for Linux.
Softcam Server 1.2.2– this utility does what
copies the property of other people's minds (downloads decryption algorithms and keys,
naturally they change from month to month, how else to take monthly
payment, although sometimes the key change occurs faster, even daily,
for example CANAL+ changes its keys every week) and forms based on it
files "Softcam.key", "Keys.bin", "Easy.Keys" - all of them are in open form and
extremely interesting to a real master (we will look at their syntax below).
Actually, you should start by studying these files if you are curious
the true nature of coding. Naturally, they can be edited manually.
You can get the utility itself from here -
http://www.dvbskystar.com/download/click.php?id=13.
10 year old child or older to install all this and
make sure it works and actually decodes, even without
additional intervention.
While you are downloading all this, I will continue.
Why it works
Everything is as usual: laziness and reluctance to spend extra money. It would be enough
was to hire a specialist and develop your own data encryption method and that’s it,
their channel would become invulnerable to such viewing (by the way, some channels are so
and they did, which is why not everyone is decoded, although an intelligent person can do everything - keep in mind,
that sometimes the whole point is that the key has not yet been found). But most use
standard encryption methods like Nagravision, Seca 1, Seca 2, Irdeto,
Betacrypt, VIACCESS 1, VIACCESS 2, VIACCESS 2.3, VIACCESS 2.5, CONAX and etc.
Naturally, they have long learned to pick them up, and some pirates are so
they became insolent that they began to produce access cards in industrial sizes;), I’m talking about them
I’ll also tell you below (about cards, not pirates). So why do the described ones work?
lower system? After all, we don't use any cards. Well, you probably already have the answer.
you understood: nothing prevents you from using the computer processor and not the receiver,
which reads the code from a file, not a card. The principle is the same, the medium is different.
What to do when everything is downloaded
Well, since you have satellite dish, then you probably have already downloaded everything.
In general, a rotor would be useful to rotate the plate around the satellites, but I think in
anyway, one way or another, you have access to the satellite hotbird- we have him
free and broadcast of paid channels occurs unofficially, so you
You won't be completely breaking the law by decoding his channels. First of all, let's install
ProgDVB, here I think my comments are not needed. Click on “next”, casually
agreeing to the user agreement, in the same way we install
Softcam Server. But it’s worth talking about it in more detail, for normal operation
device, you should edit its ini file.
SoftcamServer.ini
SoftcamURL=www.sweb.cz/cardmanie/programy/SoftCam.Key //
where to download from
SoftcamLocation=c:\ProgDVB //where to save, here
you should specify the ProgDVB directory
ServerMode=3 // does not update automatically –
you can specify 0 – to update every launch
ManualMode=1 // resave files without
confirmation
SaveMode=7 //
SoftcamName=Softcam //key file names
KeybinName=Keys //
KeysfileName=Easy //
LastDate=02/17/2006 //last download date
Installation MD Yankse 1.32.1 TT simple to the point of indecency, just unzip to
folder ProgDVB. Now every time you click on the red checkmarks
(they are also encrypted channels) - wait 5-6 seconds and Yankse will try to decrypt
channel. Its settings can be changed in the Plugins > yankse menu, but by default they are
already marked well enough for him to do everything automatically, most
interesting menu item Plugins > yankse > Show Monitor, which allows
run his decryption monitor.
For those who are still interested not in free channels, but in the decryption method:
Let's take a closer look at the contents of the file. Its lines look like this:
S PPPPPP NK KKKKKKKKKKKKKKK
where C is the encoding letter: I - Irdeto, S - Seta, V - Viaccess, N- NagraVision, X -
Conax;
PPPPP - provider ID number;
NK - key number;
KKKKKKKKKKKK - the actual key. (All digital codes are hexadecimal)
So you did your first decryption - yes, programmatically, but essentially yourself
we didn’t do anything, but this is the first step, but it’s up to you to decide where to move next.
What is this all for
And I already said - to gain knowledge, because it is not right to have
free paid porn channels, and who needs it, after all, there is one? Well, yes,
you can also record all the new movies that are usually broadcast on paid
channels, but they are not in Russian, although it’s very easy to find on the Internet
soundtracks for them... but still, we are law-abiding citizens, aren’t we?
is it? 🙂
A digression on how pirate cards are made for watching paid channels
(well, you won’t need them anymore, but you need to know, especially since the keys
decryptions are obtained there according to the same principle as for computer viewing).
So, there are two options to get the decryption key using your brains, not
money to bribe TV company personnel:
- Intercepting a legal card update over the air
- Hacking the exchange protocol between a legal card and a decoder
Interception over the air
Each legal card has its own unique address, which is its
identifier, something like the MAC address of your DVB card. Its length is 9 bytes and
it usually consists of two parts: the address of client groups 4 bytes long (SA
- Shared address) and the client’s personal address 5 bytes long (UA - User
Address), is somewhat reminiscent of IP addressing in the TCP/IP protocol stack.
By observing the headers of received packets, the card finds the one that
has its identifier, and if it finds it, it produces certain
actions: renews your subscription or even changes your decryption code (and
it means it receives a new one, or an algorithm for changing the old one, it happens like that; again
same eternal problem that all signals are sent to everyone until the satellite learns
shoot bunches of information, this vulnerability will work for pirates).
One of the most commonly used techniques in cards is at the beginning through the air
get new code in encrypted form. To decrypt it use
control key available on the card. Well, then it’s simple: after
decryption, the new code is stored in the card memory and begins to be used when
decoding signals. An important conclusion follows from this: knowing the control key,
it is possible to decrypt the transmitted new code. It is thanks to this that
were sold before (although they seem to be still available now) auto-programming
cards themselves, but they have an obvious vulnerability: there must be a legal
(i.e. paid for by the TV company) SA so that a signal is sent to this address
updates, which means if a TV company finds out about the duplicated card, then they
will easily detect which SA is used in this card (and, therefore, in
large series of cards), and will stop transferring keys to this address, and to legal
subscribers will simply be issued cards with a new SA.
Hacking the protocol
This method is very labor-intensive in a technical sense. Code Definition Process
consists of recording the exchange protocol between a legal card and a decoder, usually
are used special programs, which are very resource-intensive. It's obvious that
in this way you can get an encrypted and decrypted piece, and then
Having compared them, calculate the decryption algorithm using a banal selection. But you
understand that the longer the key, the more difficult it is to pick it up if you have it at hand
there is no specialist like the main character of the movie "A Beautiful Mind", then to decipher
may take decades. Although, of course, you can choose super instead of 1
a brilliant specialist, thousands of stupid but stubborn computers.
Remember the joke:
Today, the Pentagon's computer was hacked by Chinese hackers:
The fact is that each of the 1 billion hackers typed their password, 456,987
The 456th next assumption that the password is the word “Mao Zedong”,
the computer decided to agree.
Today on the Internet there are similar closed and open networks
selection of keys. Here it is: someone is massively fighting cancer, someone is looking for
aliens, and someone is just the key to free porn... anything can happen.
Okay, I’m saying everything here, I’m saying it, and not just one method of how exactly the signal is encoded
I didn’t tell you, well, here are a couple of examples and here I’ll finish this
article, although there is a lot more that can be said about, and even how to make a map
access, but here everything is somehow illegal... so here I am, executing
promise - the two main encryption methods are (note, they are not complicated: after all
The receiver's processing power is limited, but very effective, because
limit the length of the key, and therefore the set of implementation options):
- The TV signal frame is divided into blocks (for example, 32 lines) and in each
block, the lines are rearranged in a chaotic order (Nagra Syster system in
NTV+). - Cut each line in half at a random place and then swap
halves in places (Eurocrypt and Videocrypt).
OK it's all over Now. Clear skies!
Satellite TV, free TV, satellite hacking, satellite, grabbing, Satellite television, channel decoding, channel hacking, satellite decoding, satellite channel codes, satellite keys, satellite television hacking, satellite television hacking
Loading...
