Do you need to refill the HP laserjet p1102 cartridge? Then you are at the right place ;-). Refilling of these models will be presented using the HP36A cartridge as an example, since all other models are absolutely identical in design. By the way, in the slang of service engineers, any of these cartridges is called a “gun”. It received this name because of a feature that you will notice during disassembly of its design. So, let's begin!
There is a spring on the side that helps the curtain, which protects the photodrum from light and mechanical damage, to close automatically. The upper end of the spring must be wound (the direction of movement is indicated by the red arrow) behind a small plastic side (the green arrow points to the side).
Refilling the HP 1102 cartridge will look like this:
Then unscrew the single screw on the side.
Carefully remove the side panel (you can use a flat-head screwdriver to do this).
After these steps, it will look like this:
Now you need to separate the halves of the cartridge. Grasp one half with one hand, and, of course, the other with the other. And pull them in opposite directions (directions of movement are indicated by arrows).
Great! You now have two halves of the cartridge. We take the one with the photocell.
Carefully remove the image drum without damaging its photosensitive surface. Clean it with a dry cloth and set it aside, covering it with something to prevent light from shining on it (this can ruin it). Then remove the charge shaft - it also needs to be cleaned of deposits (if the cartridge is original, you can use a degreaser or alcohol).
Now remove the squeegee by unscrewing the two screws on the sides. And empty the contents of the waste bin.
Reinstall the squeegee after applying a little talcum powder to it.
Collect everything in the initial state, installing the charge shaft and photodrum (the photodrum also needs to be protected from light). We're done with this half, now take the other one. Unscrew the screw on the side (do not mix up the sides).
Now we remove this sidewall, holding the inner sleeve (pay attention to the photo - what the sidewall should look like).
Remove magnetic shaft.
Get out of the shell magnetic shaft core. Clean the toner shell using a degreaser if the cartridge is original. If the cartridge is compatible, then you should clean the magnetic roller with a dry cloth and only, otherwise, most likely, you will damage its surface, which will lead to printing defects (in this case, you will need to replace this component). Clean the gear too if it is in the toner.
Take the hopper itself and remove the metering blade by unscrewing the two screws on the sides
Refilling the HP 85A (CE285A) cartridge! How it works?
In order to provide the highest quality services to our clients, around the clock service center"MosToner" refill laser cartridge HP 85 A (CE285A) produced in just 4 steps:
- STEP #1. Place an order at any time convenient for you
- STEP #2. Free visit of a specialist within the Moscow Ring Road
- STEP #3. Free diagnostics of the cartridge and its subsequent refilling
- STEP #4. Cash or non-cash payment upon completion of work
On a note! Servicing cartridges HP from MosToner specialists, you save not only your money, but also time. For example, the refueling procedure CE285A takes no more than 10 minutes!
Get a discount on HP 85A (CE285A) cartridge refills
The MosToner service center offers some of the most affordable prices for cartridge refills in Moscow. But nevertheless, you can always count on additional discount, if you find a similar offer at a lower price.
For regular customers and wholesale customers we have special loyalty programs. For details, please use the form or call the contact phone number.
To receive up-to-date information about current promotional offers, it is not necessary to regularly monitor news on home page site, to do this, just subscribe to the newsletter in the corresponding menu at the bottom of the screen.
Also, the MosToner service center regularly gives promotional codes to our clients with individual discounts, with which you can save from a couple of hundred to several thousand rubles, depending on the frequency and cost of orders.
Attention! Promo codes must be entered during checkout as shown in the image.
It happens that you need to refill a cartridge, but it’s night outside, and it’s not possible to go to the cartridge refill center. Well, what if you have toner for your cartridge lying around at home? Therefore, we bring to your attention instructions for refueling. For those who have already filled up at least once, it will serve as a reminder (in the form of text). For those who are taking on this for the first time, a more detailed video is attached below!
Before you start refilling the hp CE285A laser cartridge at home, cover your work surface with newspapers, paper or waste oilcloth and lay out the tools listed in the figure in front of you.
Tools needed to refill HP CE285A laser toner cartridge at home
Having prepared all the tools, get to work.
| Take the cartridge in your hands and turn it towards you with the side with the drum protective shutter (moving part). Pull back the shutter until the drum unit is visible |  |
 |
Find a small spring on the edge of the cartridge and, picking it up with something sharp, remove it from the mechanism |
| Unscrew the two screws that secure the photodrum cover. Remove the cover |  |
 |
Grab the drum gear with your fingers and lift it out of the mechanism. Do not touch the glossy surface of the image drum with your hands, as toner will subsequently stick to your prints. |
| Inspect the surface of the image drum. If it is worn out, replace the photodrum with a new one; if it is not worn out, quickly put it in a dark place, as the photodrum may become illuminated by direct sunlight. |  |
 |
Remove the charge shaft from the cartridge and clean it with a dry, soft, lint-free cloth. If you are unable to remove the charge shaft, hook it by the metal axis with an awl or other sharp object |
| Now you need to knock out the pins that hold the halves of the cartridge together. The picture shows outer part pin, the rest of its body is located on the inside of the cartridge |  |
 |
Focusing on the location of the outer part of the pin, push it out from the inside using a screwdriver, awl, knitting needle or other device convenient for you |
| Grab the pin that appears from the outside with your duckbills and pull it toward you until the body of the pin comes out completely. |  |
 |
Once both pins are removed, the cartridge splits into two halves. The left side of the picture shows the waste toner compartment, the right side shows the new toner compartment. |
| Take the waste toner half (the one on the left), unscrew the two screws and remove the squeegee (cleaning blade). Take a vacuum cleaner and vacuum up the waste toner. If you don't have a vacuum cleaner, you can simply turn the compartment over and pour the waste toner onto a newspaper |  |
 |
Thoroughly wipe all accessible parts of the waste toner compartment, and then reassemble it in reverse order. |
| Replace the corotron that is secured in the waste toner compartment. |  |
 |
Take the compartment for the new toner (it contains the magnetic shaft) and unscrew the cover on the side where there is no gear. Carefully remove it |
| Remove the plug that covers the toner bottle opening. Hold the magnetic shaft with your finger so that it does not fall out of the mechanism |  |
 |
Insert a funnel into the neck of the hopper. After thoroughly shaking the toner can, pour 120-150 grams of toner into the funnel. Don't forget to hold the magnetic shaft |
| Continuing to hold the magnetic shaft with your finger, close the neck of the hopper with the stopper and put on the lid. Be careful not to damage the magnetic shaft spring. Screw the cap on the neck |  |
 |
Take both halves of the cartridge and connect them so that the holes for the pins line up. Return the pins to their places on both sides |
| Wipe the charging shaft and reinstall it. Reinstall the photoconductor: holding it by the gear and twisting it, put it on the metal sleeve. Insert the second side of the photoconductor into the slot. Attach and screw on the drum cover from the end and return it to initial position spring. Put the curtain back in place |  |
 |
Pay attention to the end of the cartridge. The metal sleeve should not protrude from the edge of the plastic casing. It should fit tightly into the hole. A protruding bushing indicates that you have not placed the drum unit on it correctly. The protruding bushing should be driven back under the casing with careful, measured movements. |
| Insert the cartridge into the printer. Printing a test page. If the page is printed correctly, congratulations! You've just learned how to refill a cartridge yourself! |
Laser cartridge HP 85A (CE285A) incredibly popular in the domestic office equipment market. Because it is compatible with a whole galaxy of proven printing devices HP LaserJet PRO series M And P:
- P1100ser / P1101 / P1102 / P1103 / P1104 / P1106 / P1108 / P1109;
- M1130 MFP / M1132 MFP / M1136 MFP / M1137 MFP / M1210 MFP / M1212 MFP / M1213 / M1214 MFP / M1216 MFP / M1217 MFP .
In pursuit of savings, many users prefer to refill cartridges themselves, even without proper experience in servicing office equipment. HP CE285A not an exception.
In order for you to maintain the functionality of your printer, eliminating unintentional breakdowns, use the instructions for beginners in strict accordance with the step-by-step algorithm of actions.
Tools and Supplies
- 70-80 g quality toner;
- napkin lint-free;
- curly screwdriver or screwdriver;
- cleaner internal elements of the cartridge (can be replaced with Mr. Muscle);
- vacuum cleaner with toner filter, in his absence - plastic bag and miniature brush for cleaning the waste bin;
- if the cartridge is refilled repeatedly, then after 2-3 refills it is recommended to replace it photoconductor, otherwise your prints will turn out bright.
What toner to refill HP CE285A?
Saving on toner is strictly prohibited. Not only do you risk losing print quality, but questionable ink powder can significantly accelerate the wear of the internal elements of the cartridge.
Detailed instructions for refilling HP 85A (CE285A)
The instructions consist of two parts:
- disassembly and subsequent refilling of HP CE285A with toner;
- and laser cartridge assembly.
DisassemblyHP 85A
Step #1.Remove the side cover of the cartridge by unscrewing the bolts with a screwdriver or screwdriver.
Step #2. On the side cover, cock the spring to its original position as shown in the image.
Step #3.Open the protective shutter of the photodrum and separate the consumable body into two parts.
Step #4. Carefully remove the image drum. Rub the remaining toner along the entire length of the spare part to prevent the squeegee from turning inside out when starting printing.
Step #5. Also carefully remove the corotron (charge shaft).
Step #6.Unscrew the screws on both sides to remove the squeegee.
Step #7. Clean the waste ink bin using a vacuum cleaner with a toner filter or a mini brush, carefully pouring the contents into an airtight plastic bag.
Step #8. Reinstall the squeegee. Replace the corotron after wiping it with a lint-free cloth from Mr. Muscle and wait until the part is completely dry.
Step #9. Install the photo drum. If the cartridge is refilled more than three times, we recommend replacing it with a new one.
High-quality compatible photoconductors can withstand about five refills, the original one - no more than three. This will be followed by a sharp decrease in print quality.
The first part of the cartridge is ready, take on the second.
Step #10.Unscrew the screw at the indicated location. Then remove the side cover.
Step #11.Remove the magnetic shaft rod.
Step #12. Remove the magnetic shaft cover by pushing it out in the direction of the arrow.
Step #13.Clean the magnetic roller shell of toner and treat it with Mr. Muscle.
Step #14.Clean out any remaining toner in the hopper using a vacuum cleaner or brush.
Step #15. Shake the toner container and pour 70-80 g into the hopper.
Step #16. Reassemble the second half of the cartridge in reverse order. And be sure to turn the magnetic shaft a couple of turns!
Cartridge assembly HP 85A
Step #1. Connect both halves of the cartridge.
Step #2. Align the springs.
Step #3. Install the side cover and release the side spring from the drum curtain, which was cocked in the second disassembly step.
Step #4. Tighten the screw from the side curtain.
Step #5. After assembling the cartridge, rotate the photodrum in the MANDATORY ORDER. Otherwise, the squeegee may turn out.
If the photoconductor is new, then sprinkle it with toner.
These are the instructions for refilling the cartridge HP 85A (CE285A) has come to an end. Check the printer's functionality!
Urgent refilling of HP cartridges is required in Moscow? MosToner service center - free visit of a technician within the Moscow Ring Road 24/7!
The official price of the HP CE285A cartridge exceeds 50% of the cost of new printers designed for this consumable. This is a strong argument for asking questions about it. , both through our own efforts and through specialized , since in both cases the level of savings will reach unimaginable proportions.
Do the math yourself! For a CE285A cartridge, official retailers in Moscow are asking about 5,500 rubles, while our craftsmen can recycle the part for just . However, for those users who want to save even more, we suggest that you read the detailed instructions and figure out how to refill the HP CE285A cartridge yourself.
On a note! The CE285A cartridge is compatible with HP LaserJet P1102 / 1102w / M1132 / M1212 / M1214 / M1217 / M1210ser printers.
List of required tools for refilling HP CE285A
To restore the operation of the cartridge we mentioned above, you will need a standard set of tools and consumables:
- Screwdrivers with straight and Phillips slots.
- Needle-nose pliers or medium-sized tweezers.
- Lubricating machine oil.
- Cleaning agent for the primary charge shaft (PCS).
- Compatible toner and chip, the latter if necessary. More detailed information information about resetting or replacing the protective microcircuit can be found by going to .
Detailed instructions for refilling HP CE285A
Stage No. 1. WITH right side cartridge, unscrew the screw and then remove the corresponding cover. Attention! Make sure not to lose the springs on both sides of the consumable structure. Carefully remove them using needle nose pliers or tweezers.
Stage No. 2. Slide the drum part to the left side and separate the cartridge into two halves. Remove the drum from the waste bin by carefully lifting it by the gear. Remove the primary charge shaft (PCS) and treat it with a special cleaning agent.
Stage No. 3. Remove the squeegee by unscrewing the two screws, and then clean it of debris. Replace the new or polished squeegee and be sure to apply a thin layer of lubricant.
Stage No. 4. Install the VPZ treated with cleaning agent and apply lubricant to the shaft support axis, and then insert the photodrum into place, as shown in the picture.
Stage No. 5. After unscrewing a couple of screws on the right, remove the toner compartment cover and take out the plastic gears underneath it. Also unscrew one screw on the reverse side.
Stage No. 6. Carefully remove the magnetic shaft. Unscrew the two screws and remove the dosimeter blade. Carefully remove any remaining toner powder from the area indicated on the screenshot!
Stage No. 7. Refill the appropriate HP CE285A cartridge bay compatible toner. Screw the left cover of the consumable with a screw. Install the dosing blade in the same way.
Stage No. 8. Insert the magnetic shaft and turn it until you feel a click. Mount the gears and screw on the cover.
Stage No. 9. Push the waste ink powder hopper into the toner box. Secure the springs.
Stage No. 10. Place a special spring on the side cover. Lifting the springy element of the shutter, install the body part and secure it with a screw. If there is a need to replace the chip, perform microcircuits.
This concludes the instructions for refilling the CE285A cartridge. By the way, in order to repeat the above algorithm of actions, it is advisable for the user to have at least minimal experience in servicing office equipment, because the procedure for assembling and disassembling consumables requires sufficient concentration of attention on the part of the technician.
Should I refill the HP CE285A myself or contact the Miraxprint service center for help?
Refilling the CE285A cartridge yourself entails a list of risks and pitfalls that no one notices at first glance. These include:
- no guarantee of consumable performance after recycling;
- expenses associated with the purchase of toner, special cleaning products and protective chips;
- wasted time and nerves.
This raises the question, is it worth the trouble if the HP CE285A can be given to Miraxprint specialists? The cost of refilling this cartridge in our service center will cost
., which is almost 20 times cheaper than buying a new consumable. And favorable conditions
,
together with the possibility of calling a specialist to the specified address, it will allow you to save a decent amount of money, time and nerve cells without leaving your office or home!
Still don't know how to refill HP CE285A cartridge? contact us for help by coming to the office or calling the phone numbers indicated in the header of the site to get qualified advice from professionals!
Loading...
