Windows 10, as practice shows, is a rather specific system, and its installation without registration on official resource Microsoft and creation account with a login and password is simply impossible. But a person may forget the key combination to log into the system, because the simplest passwords are not accepted during registration. Therefore, many users are wondering: how to log into Windows 10 without entering a password. Let's look at several standard and simplest procedures for disabling it, without touching on issues related to deleting a Microsoft “account”.
Login without password. Windows 10: the simplest method
In principle, the most simple option A way to get rid of the constant requirement to enter a password when logging in is to disable it in the settings by activating the so-called automatic login mode.
Let us note right away: such settings should be applied only if the user is the only user of the computer terminal. Otherwise, for obvious reasons, it is not recommended to do this.
So, how do you log in without a password? Windows 10 offers such methods. To do this, first enter the netplwiz command in the Run menu (Win + R) or find it through a search from the Start menu, and then activate execution.
In the window that appears, there is a line requiring you to enter a password, opposite which there is a checkmark. We remove the “bird”, after which the automatic login settings window appears. Here you will have to have your own the specified name Enter the current password and enter it again to confirm compliance. Now all that remains is to save the changes by pressing the OK button. All. The next time the system boots, the user will be able to log in without a password. Windows 10 allows this option.
It is worth noting that such settings apply exclusively to the moment Windows startup. If the sleep (hibernation) mode is in the active state (enabled), upon exit you will still be prompted to enter a password.
Login without password. Windows 10: Wake Up Settings
As is already clear, on at this stage you should change the exit parameters. To do this, just click right click on the battery icon in the system tray and select the power options line. This section can also be easily accessed from the standard control panel. To avoid digging around for a long time, you can call it with the control command from the same Start menu, but these settings are called up faster from the system tray.
To configure login without a password (Windows 10), you should pay attention to the line for changing wake-up password settings, which is located on the left. When you enter the section, changes are not available on this moment parameters, you need to activate a line indicating that a password request is not required. Thus, by applying both described methods, you can completely remove the requirement to enter a password both when logging into the system after startup and when exiting the sleep state.
Disabling the password requirement in the system registry
You can also change settings that require login without a password (Windows 10) in the system registry. To do this, you need to enter the editor by calling it with the regedit command in the “Run” menu, then find the HKLM branch, and in it, through the Software directory, go down to the Winlogon section.
On the right side of the editor, check the DefaultUserName entry so that the name is indicated in it current user. Then we find the DefaultPassword line. If there is none, you will have to create a string parameter (String Value), rename it to the specified name and enter the current password in the value field (then confirm it).
Now all that remains is to activate auto mode entrance. To do this, use the line AutoAdminLogon, when entering the parameters of which the value is set to one. After the reboot, the password will not be required.
Setting up a PIN code
There is another rather interesting method when you may need to log into Windows 10 without entering a password (only the PIN code will be used as a key). You can configure it through the settings menu, where you select the accounts section.
Here you need to use the login parameters line on the left. On the right side of the window there is a special option for setting up a PIN code. Next, you will have to log in to the setup system using your account Microsoft records, and then come up with and enter a four-digit code twice. Now, if the password is disabled, you will need to enter the code when logging in. As many have probably already guessed, it works the same way as the owner mobile gadget logs in if the code request settings are active.
Practice shows that the Windows 10 operating system today is a rather specific system. Installing it without registering on the official Microsoft website and creating an account with a username and password is simply impossible. However, the user may forget the key combination to log into the systems. After all, upon registration simple passwords not accepted. For this reason, many users today are interested in the question of how to log into Window 10 without entering a password. Let's look at several standard and simple procedures for disabling a password. In this article, we will not touch on issues related to deleting a Microsoft account.
Login without password. The simplest method
The most simple method, which allows you to get rid of the requirement to enter a password when logging in, is to disable it in the user account settings with the activation of automatic login mode. It’s worth noting right away that these settings need to be applied only if the user is the only user of this computer. Otherwise, for obvious reasons, it is not recommended to do this. How to log in without a password? The Windows 10 operating system offers the following methods. First of all, in the Run menu, you need to enter the netwiz command. Also this command can be activated via search in the Start menu. A window will appear asking you to enter a password. There is a checkmark next to this line. It is necessary to remove the “bird”. After this, the login settings window will appear. Here, with the specified username, you will need to enter a valid password and enter it again to confirm compliance. After this, all that remains is to save the changes made by clicking on the OK button. That's all. The next time the operating system boots, the user will be able to log in without having to enter a password. The Windows 10 operating system fully allows this option. It is also necessary to pay attention to the fact that such settings apply only to the moment the operating system starts. If the computer is in sleep mode, you will still be prompted to enter a password when you log in.
Windows 10: how to log in without a password? Wake Settings
As has already become clear, at this stage the user will need to change the parameters for exiting sleep mode. To do this, right-click on the battery icon in the system tray. Next, you need to select the power options line. You can also use the standard control panel to access this section. In order not to dig around here for a long time, you can call it from the Start menu using the control command. However, these settings are called up much faster from the system tray. If you want to configure login without a password in the Windows 10 operating system, then you need to pay attention to the line for changing password settings on awakening. It is located on the left. When entering the section for changing parameters, you must activate the line indicating that a password request is not required. By applying the methods described, you can completely remove the password requirement when logging into the system from a sleep state and after startup.
How to disable password in Windows 10 in the system registry?
You can also change the settings for signing in without a password in Windows 10 using system registry. To do this, you need to enter the editor by entering command line regedit. After this, you need to find the HKLM branch, and then go down through the Software directory to the Winlogon section. On the right side of the editor you need to check the DefaultUserName entry. It must contain the name of the current user. After this, you need to go to the DefaultPassword line. If there is no such line, then you need to set a string parameter, rename it to this name and enter the current password in the value field, and then approve it. After this, all that remains is to activate automatic login mode. To do this, you must use the AutoAdminLogon line. When entering the parameters of this line, the value is set to one. As a result, the password will not be used after a system reboot.
Setting up a PIN code
There is another rather interesting way to set up login in the Windows 10 operating system without entering a password. In this case, the PIN will be used as a key. To configure it, you must use the options menu. In it you need to select the accounts section. Here you need to use the parameter line on the left. On the right side of the window there is an option for setting up a PIN code. You need to log in to the setup system using your existing Microsoft account, and then come up with and enter a four-digit code twice. Now when you log in you will need to enter this code. As many of you have probably already guessed, this works on the principle of how the owner of a mobile device logs into the system.
When you turn on the computer, it usually asks you to enter an access code. Protecting your account with a password is designed to prevent access to your confidential information for other users. However, if you are single user personal computer, constantly asking for a password when logging in will be more of a hindrance than a help.
This is an extra action, extra information that needs to be remembered, an increase in boot time when turning on the PC, and so on. Besides, if you forget it, you will get a lot of problems.
Therefore, for most users it is easier remove password entry for your account in Windows 10. This article is devoted to this issue.
Disabling a local account password
If you use a local account to log into Windows 10, cancel password entry simple enough. You can simply delete it.
To do this, do the following:
Active the password will be removed immediately and is not required to login operating system Windows 10 the next time you turn on your personal computer.
Alternative way to disable the request
If you don't like the settings menu that was introduced in Windows 10, you can remove the passcode using the usual control panels. The tool " Change».
Do the following:
As in the previous method, the password will be removed and you will not need to enter it the next time you log into Windows 10.
Disable the prompt for a Microsoft account
The methods described above allow you to get rid of the password check at login, but only when you work with local account. However, Windows 10 allows you to log in to the system using single Microsoft account. And it is no longer possible to remove the password from it. However, you can configure automatic entry of login information when starting this personal computer. This can be done in two different ways.
Account Settings
The first way to remove the check is simpler. However, unfortunately does not work on all computers. It is highly recommended that you try it first. And in case of failure, move on to the next point. To set up automatic entry without prompting, follow the instructions below:
In most cases, this is enough to log into the OS without asking for a password. However, if you were unable to remove the check, you will need to do manually editing the registry.
Registry changes
The registry stores data that Windows 10 uses to operate. By changing existing entries and creating new ones, users can seriously change the way the operating system works. Therefore, all changes must be made extremely carefully, since any mistake can lead to incorrect operation computer.
Before starting work in the Registry Editor, it is strongly recommended to create a system restore point. If something goes wrong, you can easily roll back to the saved one. Windows versions 10 without resorting to reinstallation.
Registry Editor
To enter the editor, users will need to do the following:
If you do everything correctly, Windows will not ask for a password when you boot.
Video on the topic
When loading the operating room Windows systems 10, a user who has a Microsoft account must enter a password to log in. This setting(password prompt) is performed by default to protect user data.
If unauthorized people have access to your computer, enter the password for your Microsoft account (formerly called Windows Live), will not allow strangers to enter the operating system and gain access to user data. Therefore, keep in mind that requiring you to enter a password to log into Windows 10 increases the security of your computer and protects you from possible negative consequences.
Constantly entering a password when booting, rebooting, or waking up from sleep mode is not always justified for those users whose computers do not have access to unauthorized persons. Therefore, in this case, it makes sense to disable the password in order to use Windows 10 without a password by removing the corresponding prompt when logging in.
In this article, I will talk about how to remove the password in Windows 10 when the computer boots and when the computer wakes from sleep mode.
How to disable login password in Windows 10
To disable the password when logging into Windows 10, you need to change your user account settings.
Press the “Windows” + “R” keys on your keyboard, in the “Run” window that opens, enter “netplwiz” (you can enter “control userpasswords2”), and then click on the “OK” button.
You can run this command in another way: enter the expression “netplwiz” in the “Search in Windows” line, and then click on “Run command”.
After this, the “User Accounts” window will open in the “Users” tab. Here you will see a list of users on this computer. Highlight the desired user if he is not alone.
In the Automatically sign in window, enter your Microsoft account password, confirm the password, and then click OK.
After applying these settings, the password prompt will be removed when loading the Windows 10 operating system.
Now all that remains is to disable password entry when Windows 10 wakes from sleep mode (changing power settings).
Disable Windows 10 password prompt when resuming from sleep mode
To disable the password in Windows 10, when waking up from sleep mode, go to the Start menu, go to Settings. In the Settings window, click on Accounts. In the Accounts window, go to the Sign-in Options section.
In the “Login required” setting, the operating system asks the user: “In case of your absence, after what Windows time Should I require you to log in again? By default, the “Time when the computer wakes from sleep mode” setting is activated. Select the Never setting option.
After you disable the password prompt when waking from sleep in Windows 10, the operating system will no longer require you to enter your Microsoft account password.
After the reboot, the password entry field in Windows 10 will be removed from the operating system login window.
Conclusions of the article
When the Windows 10 operating system boots, if the computer is using a Microsoft account, the user is required to enter their Microsoft account password to sign in. These are security requirements to protect user data from unauthorized entry into the operating system. The user can remove the password prompt in Windows 10 when turning on the computer, or when Windows exits sleep mode.
How to remove password when logging into Windows 10 (video)
Loading...
