Question about how to view who is connected to my Wi-Fi adapter with the Internet from Rostelecom, can often arise due to traffic leakage. The situation is especially critical when there is no wireless connection security or when using a weak key, such as WEP encryption. To solve this problem, first of all, you need to familiarize yourself with the list of devices connected to the Wi-Fi network, and then deny access to unknown clients or strengthen protection.
How to check who is connected to my Wi-Fi Rostelecom
Before you check who is connected to my Wi-Fi adapter with Internet from Rostelecom, you should read the instructions for working in. Network equipment, just like a computer, has an operating system, but it is controlled using slightly different methods, since routers and Wi-Fi access points do not have information input and output devices (screen and keyboard).
To connect to the network equipment system, a computer located in local network. Most models of routers and access points support a web interface for convenience and speed of parameter management. It allows you to connect to network equipment using any browser installed on your computer.
Connecting to network devices with a web interface
How to find out who is connected to my Wi-Fi based on the Internet from Rostelecom using the software built into the router or access point. For this we need:
- data for access to the software;
- a computer connected to the router’s local network;
- a few free minutes.
We recommend! It is advisable to have instructions that come with the network equipment. In it you can find out the standard user login and password for your router model, as well as network address default device.
The first thing you need to do is open any browser installed on your computer. It could be Internet Explorer, Google Chrome, Mozila firefox or Safari, which is the default in operating systems Mac systems OS from Apple. If desired, all the steps described below can be performed from mobile devices under Android control, iOS, Windows Mobile or any other system that supports Internet access within the means Wi-Fi module installed in the gadget.
Having opened a suitable browser, enter address bar IP network device. This address may be different even for equipment released with the Rostelecom logo, since the provider uses hardware from third-party manufacturers and does not manufacture devices.
In order to find out who is connected to mine from Rostelecom, you should familiarize yourself with your router model. For devices released by D-Link, The IP of the equipment is usually 192.168.0.1. Each manufacturer, by default, sets a starting address in its equipment for connecting to the device, the exact value of which can be found in the attached instructions. If you don’t have it left, you can try using IP:
- 168.0.1;
- 168.1.1.
When the router's IP is determined and entered into the address bar, clicking on it will direct us to the authorization page. Here you will need to enter:
- login;
- password.
The standard login and password information for your router model can be found in the instructions for it, as well as in the contract for the provision of Internet services of the provider (in the case when the installation of the equipment was carried out by a Rostelecom employee).
Attention! Typically, these parameters have the value login - admin, password - admin.
After successful authorization, the user will be presented with Homepage software. Depending on the brand, it may contain data about the operation of the router, its model and firmware version. But the main thing we need is the settings menu. In it you need to select the Wi-Fi tab and go to it. While on the item page or from the drop-down menu in the previous step (depending on the model and software version), select the following sub-heading “List of Wi-Fi clients”.
Attention! The names of the items and their location may differ among different manufacturers.
On this page you will be able to see who is connected to the Wi-Fi router from Rostelecom, and get acquainted with additional information about client operation (device Mac address, session time).
How to remove unwanted clients
You will not be able to delete unwanted clients on this page. To edit the list you will need to go to the MAC filter menu. Here you can add allowed addresses or block some Wi-Fi clients. You can also get rid of unwanted devices by strengthening the protection settings in the corresponding tab and changing the keys.
To view the list of users connected to our Wi-Fi hotspot To access, you need to log into its web interface. also in software network device, you can allow or deny access only to certain clients.
Nowadays it is almost impossible to imagine any home without Wi-Fi. Wireless networks give us access from a wide variety of gadgets, without the need for cables and additional accessories. But it is worth remembering that the signal from the Wi-Fi router extends beyond the home. There will always be people who will definitely take advantage of the opportunity and start not only using your Internet completely free of charge, but also causing a lot of inconvenience. How can I find out who is connected to my Wi-Fi?
The first “symptoms” of third-party connections
Internet routers (routers) are now found in almost every apartment where there is access to the global network. These devices provide online access to the most various devices- laptops, computers, tablets, smartphones and many others. But if your router’s signal extends beyond your home, there will definitely be those who will try to take advantage of the opportunity free internet. You can determine that third-party gadgets are connected to Wi-Fi by the following signs:
- The speed of your Internet connection drops significantly, until the channel is completely clogged;
- router settings are changed without your knowledge;
- in the list of devices you see third-party gadgets whose MAC addresses you do not know;
- WAN indicator ( wireless network) transmits and receives data while you do not have any device connected to the router.
The main feature, as a rule, is the first point, since what more people uses a wireless connection, the more it decreases throughput both the router and the provider. Based on this sign, we can conclude that someone is using your Wi-Fi.
How to check Wi-Fi for third-party users?
We have decided on the symptoms and now it’s time to figure out how to find out which devices are unauthorized, as well as who has gained access to your router in the first place. The easiest way is to use the device admin panel:
- make sure that the router is connected to the computer and open any browser convenient for you;
- enter 192.168.0.1 or 192.168.1.1 in the address bar (the address of the admin panel may differ depending on the router model, but the entire necessary information can be found either in the instructions or on the bottom of the device);
- after this, a login/password entry window will appear in front of you, where you need to enter the necessary credentials, except for users of the dd-wrt firmware, where the confirmation window pops up only after navigating through the tabs;
- Here we go to the tab " Wireless connections"(wireless) and select the item "Network Statistics" (Wireless Statistic).
Here you can see a list of devices connected to your wireless network. Using it, you can track uninvited guests and also limit their access to the router.
You can also view how many connections are currently active and how many devices are using the router on the DHCP Clients List tab, if there is one in the admin panel. In addition, here you will receive more detailed information - MAC addresses and assigned IP, which will greatly facilitate the search for other people's devices.
Disconnecting unwanted guests from the router
Now you know how to see who is surfing your Internet without your knowledge, and it’s time to take action. And most the right decision Unscrupulous users will be forcibly disconnected from the network. To do this you need:
- go to the admin panel of the router;
- go to the tab “Wireless” – “Security” (Wireless Security);
- check if encryption is enabled, and if not, select WPA2-PSK from the drop-down list;
- Next, in the field below, set a password - at least 8 characters, and for greater reliability, mix letters with numbers of different registers;
- Click the Save button.
As a rule, on the same tab you will find a setting for the number of clients that can connect, but you need to change this parameter if you are always connected to the wireless network a certain amount of devices. After installing the protection, the router will reboot and all unauthorized devices will be disabled.
If you already had a password, and strangers managed to hack it, you need to disable each client manually, but first you need to determine which MAC addresses belong to your computer, tablet, smartphone, etc.
Go to the DHCP Clients List tab and disable all suspicious gadgets, change the password to a more complex one and reboot the router. If you accidentally turn off one of your gadgets, don’t worry - just allow the connection in the router’s admin panel.
Protecting your Internet from interference
To prevent future connection third parties to your wireless network, you need to take care to ensure the maximum level of security. This is done as follows:
- go to the router settings;
- copy the MAC addresses of all your devices that are connected to the router;
- find the Wireless MAC Filtering item;
- add the previously copied addresses here.
After making changes, save the settings and reboot the router through the admin panel. Such protection will be useful not only at home, but also in office environments, since you will only allow connections to devices with certain MAC addresses. But the disadvantage of maximum protection is that you will have to allow access to each new device manually, which with a high turnover of gadgets, for example, service center, not very convenient.
Step-by-step video instructions:
Programs for monitoring Wi-Fi activity
Despite the fact that you can perform all operations to disconnect and connect new users using the standard router control panel, doing this is not always convenient, since you will have to check network activity quite often, and shell does not have notification capabilities. But you can find software on the Internet that will allow you to view the list of clients without having to go to the admin panel:
- Network Watcher is a simple utility that scans a network and displays all devices connected to it. Users will be able to check the computer name, MAC address, Internet protocol and detailed information about the network card.
- WiFi Guard - has all the same capabilities as Network Watcher, but can also notify the owner of suspicious activity.
- NETGEAR Genie is a more advanced tool, as it allows you to get information not only about wireless connections, but also a network map. With its help, users will be able to manage the router and all connections, and if a child often works at the computer, you will be glad to see the Parental Control feature.
Wireless networks open up many opportunities for users, but do not forget that in the absence of the necessary level of security, a complete stranger can connect to them. This will not only lead to certain inconveniences, such as a drop in speed, but may also lead to the loss of confidential data. Therefore, you need to make sure in advance that no one else uses your Wi-Fi without your knowledge.
Video:
If your Internet speed has dropped, you may need to find out how many people are connected to your Internet. This is done quite simply, just go to the router settings and check.
Look who connected to your wi-fi quite simple. It’s also easy to “kick him out” from the team and deny him access. After all, if your Internet is glitchy, maybe you someone steals it. So let's go
Again, you need to know what address your router has. In order not to repeat, I will write at least different alternative methods recognizing the router's main address
Press winkey + R -> Enter cmd -> ipconfig /all
This is what the Address looks like if you are connected from the network (via a cord) to the Internet 
If you connected via wifi, then the main network address (the address of your router) after entering the commands as written above 
In any browser, enter the address that the command gave us ipconfig/all. Now enter 192.168.1.1 into the address bar (in your case, your option) This way we will connect to the router first, and then we can look list of those connected to our wi-fi networks
. Enter the administrator login and password. Usually admin/admin, and most often you change it yourself. It happens that the Internet provider gives you a paper with the login and password for the router written down. After entering, we get to the admin panel of our router. 
Now let's look at two different routers
Let's see who is connected to Tp-link. Example with OpenWRT firmware.
To do this, go to Network –DHCP and DNS. In the Active DHCP Leases line. As you can see from my screenshot, there are only 2 devices connected at the moment. This is 1 computer and 1 laptop. 
How can I find out if I am connected to my Wi-Fi or someone else?
You can look at your Mac addresses on your devices (phones, tablets, iPhones) and check them with those in the list
You can find out the mac address of Android (Android phones and tablets) in Settings-> About phone -> Technical information
You can find out the mac address on an iPhone (phones and tablets on iOS) in Settings -> General -> About this phone
You can see your mac address of your computer by pressing winkey + R and entering cmd – ipconfig/all
Look at the top 2 screenshots. In short, the Physical address is the Mac address.
This is what it looks like in my case. I have 1 computer and a laptop connected. I see that this is true. Computer via cord, and laptop via wi-fi 
How to add to the blacklist
You need to add it to the Mac blacklist. I’ll continue to show here for now (TPLink OpenWRT), but then I’ll show you using the example of the Dlink Dir-300 router
So let's go to Network -> WiFi -> Edit -> Mac-Filter 
As we can see, we have 3 types of Mac-filer. Disable – disabled, which is most likely also selected for you, Allow listed only – Give Internet only to those who are on the list, Allow all accept list – Exclude those who are on the list. Father-in-law, you need your version. Let me try (for a while, for example, remove my laptop so that it cannot connect) 
I select, Allow all accept list (Exclude those on the list) and enter his Mac address. Click Save Apply 
As soon as I clicked Apply the laptop turned off. And if we go back to DHCP, we will see that the laptop is not in the list. Just before updating the list, the device must be rebooted! 
OK. I also have dir-300 with me here and I will show you how to do the same there. Let's go to the admin panel. Now we need to go to Status - DHCP. 
To add to the blacklist, you need to go to Wi-fi – Mac filter. Allow is an option when only those from the list will receive Wi-fi. The prohibit option means that everyone whose addresses you enter will not receive the Internet. 
Now you have learned a little more about the capabilities of your router, you have learned how to manage users, who connected to your Wi-fi network
Since its inception wireless technologies and, the problem of traffic leakage has become especially urgent.
It would seem that you are not downloading anything, but the statistics show that several hundred gigabytes have been downloaded over the current day/week/month.
If not you, then who did it?
How to see who is connected to your wifi D-link?
First you need to get into the settings of the router itself. For these purposes, enter the standard set of numbers of the IP address () in the browser. If the system starts to “quarrel”, then change the address to 192.168.1.1.
You will see a typical dialog box in which you need to enter your login and password.
The windows may differ from each other, but their essence is the same. Login – admin, password – admin.
Go to the main router settings menu.
Immediately you need to switch from basic settings to extended, otherwise you won't see anything. For these purposes, there is a corresponding menu at the bottom right.
We are interested in the “status” item and the double arrow to the right of the name. Click on it until you come across the “client” link. That's what we need.
Here you can see a complete list of all devices and gadgets that consume traffic via Wi-Fi. Count how many of them belong to you.
In particular, the following can work from the router:
- laptop ;
- tablet ;
- TV ;
- game console, etc.
If the number of subscribers significantly exceeds the number of “allowed” devices, it means that someone has illegally “sucked in” to your source.
There are 2 options to solve the problem:
- Setting a password;
- Changing it to a more complex one.
Important! Password your access point if you haven't already done so. Firstly, you will benefit in data transfer speed, because traffic will not be scattered to unauthorized users, and secondly, you will protect yourself in the future.
How to see who is connected to your wifi TP-link?
Perhaps the most famous company supplying network hardware. Setting it up and also viewing the list of connected devices is not difficult.
So, how can I see who is connected to my wifi tp-link? At first, you will be required to enter the same standard IP, i.e. 192.168.1.1.
Note! If you have not previously changed either your login or password, then enter “admin” in both columns.
In order not to tinker with all the settings and search for parameters at random, switch to the “Wireless” tab. Next, click on the “Wireless statistics” sub-item.
Here is a list of all devices that are currently connected to your Internet network via Wi-Fi (in this case, 2). You can see 3 columns:
- MAC address;
- Encryption type (same for all);
- Number of packets transmitted.
The choice of options is, of course, meager, but this is all the available statistics.
Besides Wi-Fi connections You can also look at those who are powered from your router “the old fashioned way”, i.e. via cable. To do this, open the “DHCP” - “DHCP Client List” tab.
There are also 3 data columns available here:
- PC name;
- MAC address;
- IP address.
Thus, you can “detect by IP” someone who has not quite legally connected to your network and is blatantly stealing traffic.
And just in case, change your router access password or enable this function if you have not done so before.
How to see who is connected to your ASUS wifi?
No less well-known supplier of routers to the CIS markets. To find out who else shares traffic with you, just go to the router settings (192.168.1.1).
You are taken to the main menu with a list of settings.
We are interested in nothing more than a “network map”. It shows in detail how many people are “powered” by your router, the names of the devices and the IP addresses of each.
This screenshot shows that all subscribers are on the same subnet, i.e. There are no “outsiders” here. But if they appear, they can simply be deleted or blocked.
As a last resort, password-protect your access point or change the login key to a more complex one.
If you are told that it is impossible to determine the number of “illegals” who steal traffic for personal purposes, you can safely laugh and prove the opposite.
Some router models allow you to limit the number of simultaneously connected devices, vary the data transfer speed, and more.
In any case, ask about additional settings from the seller or look for similar information on the Internet.
How to find out who is connected to my wifi
How can I see who is connected to my wifi router?
After widespread distribution Wi-Fi routers, their owners had questions about Internet traffic leakage. Even if the user himself does not download anything from the network, he still has a large traffic consumption. This may happen for the following reasons:
- unauthorized connection of their devices by strangers to the owner’s router;
- updates for programs are downloaded operating system the router owner’s computer (the volume of downloaded data should not exceed two gigabytes in one day).
How can you find out about possible connections based on signs?
To find out, you need to pay attention to the following signs:
- Internet speed has decreased;
- frequent blinking of light bulbs Wi-Fi device even when the computers are turned off and mobile devices router owner.
How can I quickly see how many devices are connected?
Before you see how many devices are connected, it is recommended to determine the number of your own devices using Wi-Fi and turn them off. Only the PC needs to be left on. Using it you need to do the following:
Also, particularly experienced users can check using a cable connection. Required in the device settings through the “DHCP” tab, enter "DHCP Client List". The advantage of this method is that in addition to MAC addresses, you can also view and find out IP addresses.
If you click on "Refresh" the page content will be updated.
Blocking a foreign MAC address
How to accurately find out and determine which are yours and which are third-party MAC addresses? To do this you need to enter for example with mobile device go to settings and then to the device information section and look at your MAC address.
To block third-party addresses, you must enter “Wireless MAC Filtering” and click “Enable”. Then place the button on parameter number one. Having done this, enter a foreign address and set the parameter “Disabled”. Next you need to save the adjustments made.
How to check through the router settings panel?
You need to enter 192.168.1.1 or 192.168.0.1 in the browser. Then enter the name and access code (by default they are both “admin”).
In the window that opens, go to the “Wireless” tab and then to “Wireless Statistics”.
You must switch from basic to advanced settings. For this purpose, you need to refer to the menu located in the lower right corner. Then go to the “Status” section and click on the double arrow to the right of the name. A list of connected devices with MAC addresses will be displayed. Then find out which of them are strangers. Then you can block them.
But also the best option To secure a Wi-Fi network, you need to set a password. It is recommended to come up with complex password with a combination of different numbers, letters and symbols.
How can I see who has connected using LAN scanning?
You need to enter the IP of the PC and select the closest range. Once the scan is complete, the addresses of the computer and router will be displayed. The appearance of additional addresses, i.e. a number greater than two will indicate the connection of third-party devices.
Using a special program to check
There is a program specially developed for these purposes, “Wireless Network Watcher,” which allows you to identify Wi-Fi “freeloaders” and, moreover, the program is free and does not require installation.
You need to work with the application from a computer connected to the router via a LAN cable connection. The “WNW” utility allows you to identify, in addition to MAC and IP addresses, the names of device manufacturers. The list of devices can be converted into any text editor.
Loading...
