Today, a large number of users use sound cards from the manufacturer Realtek. Some of them are aware that for correct settings It is recommended to install the Realtek HD manager. It is imperative to understand what this is software, what are the main rules for setting it up and is it needed at all. There are many problems with this manager, the most common situation is when the program cannot be found in the control panel.
In the postscript “HD” there is an explanation High Quality. It was created exclusively for Realtek sound cards so that the sound quality would be high level. This is where many users’ knowledge about this software ends. However, this is not only a sound enhancement program with some nice effects.
Note! This software includes a whole package of drivers that are responsible for the correct operation of all sound system User's PC.
What are the advantages
There is another reason why many users prefer this particular software. It provides support hidden possibilities sound cards. If you install a standard set of drivers, it will be impossible to use them.
There is a whole list of advantages of using:
- The user no longer has problems setting up different sound formats. Now he no longer needs to install various additional programs and searching for reproduction errors;
- the sound becomes more “clean”, its quality noticeably improves;
- if the user resorts to voice search or messages, and also often records his voice, it will sound clearer and recognition will improve;
- This is a real godsend for gamers who play games with surround sound. Using this software gives you complete immersion in the atmosphere;
- all devices that have the “Plug&Play” standard are no longer a problem for the user.
The application of this manager is universal. The software is suitable for devices from the manufacturer Realtek, as well as from other manufacturers. In this case, no problems will arise.
Where to find it on your computer
The Manager is a system element, therefore, located in the Control Panel, which can be accessed through the Start button. In some cases (usually this happens immediately after installation), this applet is placed in the system tray, while it is always active and runs in the background.
A very common situation is when Realtek dispatcher HD is not in the control panel. The problem does not always lie in outdated version operating system. It is likely that the user either installed the wrong distribution or downloaded it incorrectly, which resulted in problems.
If the dispatcher could not be found
It is likely that this software was not installed on the system. This is a common practice, since this manager does not belong to the set of standard drivers.
To solve this problem, you need to visit the official verified website of the developer, find “Hot Downloads” and click on the “High Definition Audio Codecs” item. Next step is manual installation of this software to your computer.
How to install "Realtek HD" on your PC
To perform these actions, no additional knowledge is required; the system will do everything itself.
Experts recommend restarting your computer immediately after installation so that the program starts working correctly. If after the above steps nothing has changed, you need to return to the developer’s website and find additional packages, following the same installation steps.
When downloading, it is important to pay attention to the “drivers only” note. It says that only the drivers themselves are being downloaded, and the manager will not be installed.
In the screenshot above, at the very bottom you can find the required Realtek SoundBack.
Note! If after installation the software is still not visible, then it is likely that the problem is that its display has been disabled.
Now the user needs to restart the computer again. The Manager should appear in the Control Panel.
Manager sound settings
Once the dispatcher is found, you need to enter the correct settings for proper operation. All key parameters relate to the various effects, as well as the location where the user is located.
Note! When choosing a sampling frequency, it is best to choose 48000 Hz. But it is most often recommended to set the sound depth to 24 bits.
Although these indicators are generally accepted, the user can change the parameters at his own discretion.
Installing codecs
Codecs are installed in order to obtain a deeper and more pleasant sound. In this case, you won’t have to download anything, since the dispatcher will provide good sound to any audio or video format.
If you wish, you can still download the K-Lite program, which includes a wide variety of codecs. Experts recommend choosing the version “ Mega Codec Pask".
Finally
It is worth noting that this manager, as well as the drivers, will be very useful for those users who prefer to listen to music and watch videos with perfect sound. The program interface is intuitive and settings are straightforward.
Some operating room users Windows systems 10 claim that all these parameters can be configured without a dispatcher, but in the system itself. The modern version does provide such an opportunity, but in the software itself everything useful features collected together, which is very convenient for use.
If the sound suddenly disappears during correct operation, then there is no need to rush to update the system. It is possible that the speakers or headphones were not connected quite correctly, which is why the sound disappears from time to time. It is important to correctly identify the socket on the panel. Manufacturers often make the plugs and jacks the same color to make it easier for users to find their way around.
If you have problems with installation and startup, the above tips will help you cope perfectly. But if the user has not achieved the desired result, then there is a high probability that the installed sound card is not supported on his computer. In this case, all actions involving re-installation or editing the registry will not lead to the expected result.
Video - Realtek HD Manager for Windows 10 is not in the Control Panel
(there is a separate article) on the system unit? I had all this and it worked before reinstalling the system. A few days ago Windows 7 had to be reinstalled and now there is no sound, the realtek manager has disappeared and the front soundbar does not work. I can't find the driver CD. You can, of course, call a specialist, but the prices are expensive, and I’m studying at school, and I want to figure it all out myself, because I managed to install the operating system myself. Edik.
Letter No. 2. I have a problem: I reinstalled the operating system and immediately a question arose how to install sound driver, the Windows 7 operating system found all other devices and the drivers were installed automatically, this can be seen in the device manager, but instead of my audio device it was written Audio device on the High Definition Audio bus and that’s it. According to your article, I determined - Device instance code (equipment ID) went to www.devid.info, pasted into the search field
HDAUDIO\FUNC_01&VEN_10EC&DEV_0883&SUBSYS_1043829F&REV_1000 and clicked Search, after a few seconds the following result was obtained:
Realtek High Definition Audio
Manufacturer: Realtek Semiconductor Corp.
Operating system: Windows XP, Vista
I decided to call the wizard and he very simply installed the sound driver for me from his disk, but the Realtek manager did not appear for me and he and I were unable to turn on the front sound panel, although before reinstalling the system it worked and I connected it to it headphones. Tell me how to do everything right, you are also a master. Ilya.
How to install a sound driver
Note: Friends, in general there is a rule: immediately after installing the operating system, go to your website motherboard and download all drivers (sound, network, etc.) from there, we even have a detailed article on this topic. If for some reason this did not work out for you, you can download the sound driver directly from the website of the manufacturer of the sound card built into your motherboard; in most cases, it will be a sound card Realtek card, that is, read everything that is written below.
We take a computer with the same integrated (built-in) Realtek sound card into the motherboard in the form of a microcircuit, like our reader, and a newly installed operating system and Windows 7 without sound drivers (I deliberately did not install the driver for the sound device, we’ll install it together with you).
In device manager I have an item Sound, video and gaming devices
and under it there is a Device supporting High Definition Audio, indicating that the system contains a new generation sound device that supports the high-definition sound standard HD Audio, but there is no sound in the system, since this device driver not installed.
Note: On older motherboards, instead of High Definition Audio, there may be AC’97 - an outdated standard audio codec developed by by Intel in 1997 But the sound subsystem built into our motherboard operates according to a newer standard - High Definition Audio or HD Audio. Intel High Definition Audio is a relatively new specification for audio codecs, developed by Intel in 2004, characterized by improved quality digital audio, increased number of channels, more high frequency transmission compared to AC"97.
- We determine the exact name of our sound card and, accordingly, exactly what driver we need.
- We find the driver on the official website of our sound card, download it and install it, if it is a realtek sound card driver, it must be accompanied by the official driver realtek manager will also be installed(no need to download it separately).
- In order for the front sound panel to work, we have to configure realtek manager, this is not difficult and in most cases is enough for the front sound panel to function normally. If we fail, we will have to enter the BIOS and set the Front Panel Type parameter - from HD Audio to AC-97 (all details below).
During the existence of the site, question How to install the driver for sound, was asked to me countless times, in addition, before writing the article, I specifically observed how an ordinary user searches for drivers on the Internet and came to the conclusion. People want to find drivers anywhere, but not on the official website of the device manufacturer. Why is this happening?
If the situation is, for example, with drivers for a video card, then it’s relatively simple, everyone knows about the existence of a Russian-language site, where everything is very simple and clear and even has its own program, by running which you can easily find out the exact name of your video card and select it there required driver. Naturally, on such a site it is not difficult for an ordinary user to download the required driver, this is undoubtedly a big plus for the creators of this site.
The situation is different with sound drivers, although here, too, there are only a few main manufacturers and the most important one, in my opinion, is Realtek; personally, I most often have to deal with searching for and installing drivers from this particular manufacturer. Indeed, the website www.realtek.com freezes periodically and does not support the Russian language, but you can still download drivers from it; personally, I have always succeeded.
Of course, first of all you need to know the name of your sound card. To accurately determine the name of almost any device connected to the motherboard, including built-in and discrete sound cards, you can use a simple, but nevertheless irreplaceable (for example, in my work) program called AIDA64 or you can use exactly the same Everest utility .
More exotic methods determining the names of devices and searching for drivers for them by ID equipment code, using the site pcidatabase.com and www.devid.info, are given in our article How to find a driver by device code(link to the article above), we will not repeat ourselves, if everything written below does not help, you can read it.
So, let’s go to the official website of the AIDA64 program. Having been free in the recent past, it recently became paid, but you don’t need to buy it right away. For the first 30 days, the developer gives us the opportunity to use the program without any restrictions. It seems to me that this time is more than enough for us to determine the name of the device we need. If you like the program, then of course you can buy it.
On the official website of our program http://www.aida64.com/ click on the Download button,
You can download the program in the installer or in the archive, let's download it in the archive, click on AIDA64 Extreme Edition Trial version, ZIP package , Download .
We’ve downloaded it, now let’s unzip our program into some folder,
go to this folder, then run the file aida64.exe and our program starts
In the main program window, click Computer.
then Summary information
and we see everything that we have installed inside system unit: the name of the motherboard and its chipset, as well as the name of the processor, video adapter, BIOS type, and so on.
Half the job is done, go to the official Realtek website - www.realtek.com. Many users complain that the Realtek website does not support the Russian language; you can get out of the situation by using Google browser Chrome, it will easily translate everything for you.
Click Downloads
and choose High Definition Audio Codecs (Software)
Check the box I accept to the above and click Next
Why I chose High Definition Audio Codecs (Software) drivers. Because these Realtek sound drivers are universal in their kind. They support all new audio formats and are suitable for almost all Realtek High Definition Audio sound cards, including ours (highlighted in red). These drivers are intended for operating systems: Windows 2000, Windows XP, Windows Vista and Windows 7/8 32-64bit.
- 1. Support Vista/Windows 7 WHQL: ALC882, ALC883 , ALC885, ALC886, ALC887, ALC888, ALC889, ALC892, ALC899, ALC861VD, ALC660, ALC662, ALC663, ALC665, ALC670, ALC680 ALC260, A LC262,ALC267,ALC268,ALC269, ALC270, ALC272, ALC273, ALC275
- 2. Windows support 2000/XP WHQL: ALC880, ALC882, ALC883 , ALC885, ALC886, ALC887, ALC888, ALC889, ALC892, ALC899, ALC861VC, ALC861VD, ALC660, ALC662, ALC663, ALC665, ALC670, ALC680 ALC260, ALC262, ALC267,ALC268, ALC269, ALC270, ALC272, ALC273, ALC275
If we have one of the 64-bit systems installed - Vista, Windows 7, Windows 8, then click on the second Description of the table.
Accordingly, if you have 32-bit Windows 2000, Windows XP/2003 (32/64 bits) installed, then select the seventh position.
We have chosen our version of the operating system, for example, we have Windows 7-64-bit installed, now we select Site from which we will download, you can select any one, for example, located in China and left-click on it once.
Download the driver and run it.
Drivers are being installed into the operating system.
and Realtek Manager is installed along with the drivers. After restarting the computer, we will have sound in Windows.
In the device manager we see the version of our driver, it is the latest.
Read our next article -. Very convenient, I recommend it!
The article describes instructions on what to do if the Realtek HD Manager is not in the Control Panel. Realtek HD is free software that contains drivers for interpreting audio streams. This package is a successor to a number of AC'97 firmware revisions that were created in 2004 by Intel. The hardware controlled by HD Audio reproduces 192 kHz/24-quality dual-channel output and 96 kHz/24-bit multi-channel output. In total, up to 8 channels are supported simultaneously. When using Realtek HD Audio, you often encounter a phenomenon where sound drivers work stably, without failures, but the sound manager is not in the control panels. In this case, we cannot configure sound scheme by software method.
Search for Realtek HD Sound Manager on your computer
If you are going to edit the sound circuit or microphone, but the Realtek manager is nowhere to be found, not at the bottom of the tray, nor in the Device Manager. Not among installed programs- in this case, go to the “Control Panel”, now click “Sound” - it should be displayed in this item. Additionally, check its presence in the “Device Manager” in the list of equipment, in the “Sound... devices” section.
Removing the old driver and installing the new Realtek
If you still cannot find the Realtek sound manager in the Control Panel, try uninstalling the old driver on sound equipment your computer. For this:
Download Realtek HD driver from the official website
If you have searched all the services and corresponding panels, but Realtek HD is nowhere to be found, you need to download it. To do this, open the software download page - http://www.realtek.com.tw/downloads/ and select from 3 the one required for your system.
Before downloading software from the Realtek website, you will need to register and log in to an account.
The problem sometimes occurs due to the current driver, which was not taken from the official website. If the Windows where the problem occurs is also not official, but downloaded from a torrent or installed from the wrong “blanks”, then you cannot working window Realtek HD on your computer. Install the original manager driver and restart the OS.
Other problems with Realtek HD software
There are other types of problems with Realtek HD, for example, the sound is lost. In this case, there is no need to rush and blame the system. First, check whether the speakers and headphones are connected correctly. Check to see if you have mixed up the socket on the panels (back, front), this happens even to experienced users. Typically, manufacturers designate the color of the socket and plug the same. Therefore, it will not be difficult to detect the problem.
What to do if there is no sound from the headphones
Then run – “ ” on your system and check the sound tabs. Also open to panel Windows applications and select “Sound” - check the sound scheme, the “Sound” checkbox may be checked - off. Check also additional settings sound.
It happens that when in Skype the headphones start working after unchecking the “ Automatic setup" Try installing the sound driver by removing the old one.
You can download a special driver pack that contains drivers for all occasions. Such a package is the “Driver Pack Solution”. The advantage of such software is that this program itself scans your system and calculates old drivers and, if an outdated driver is found, downloads and installs new version on one's own. Perhaps this package will help you detect and install the required version for the audio device that is causing problems.
Setting the sound in headphones Scan your system for viruses using your antivirus software. If various types of problems and errors occur in the system, you need to check all hard disk for viruses in a deep way, because viruses can cause any kind of errors and failures in the system, even if the Realtek HD manager is not in the control panel.
Question: Realtek HD High Manager - Definition Audio Codecs (Software) does not start
Good afternoon
After updating Windows 10, the Realtek HD manager stopped working, there was no hidden icons and in the control panel!
It was in autoloads, etc...
I decided that most likely it was a clumsy Windows 10 update! I reinstalled, but the result is the same!
What could be the problem? Why won't Realtek start?
Thank you in advance
Answer: Should I remove the old Realtek driver?
Added after 37 minutes
Thank you, it helped!
Question: There are no playback device options in Realtek HD Manager
Good afternoon After Windows updates 10 there was one problem. Before this, I used speakers and headphones at the same time: the speakers were connected at the back, the headphones were connected to the front panel. Everything would be fine, but previously the sound was played simultaneously on 2 devices without switching in the system (I only adjusted the volume on the devices themselves), but now only the speakers work by default, headphones muffle the speakers when connected. I searched on the Internet that in the realtek hd manager you need to check the “assign front and rear output devices...” in the settings to solve the problem. But! There are no such checkboxes in the settings, I have already reinstalled 5-6 versions of Realtek. What can you tell me? how to proceed. The option of clicking the headphones back and forth doesn’t suit me, since before everything was ok.
Answer: You did not catch the essence of my problem, I need to quickly switch between the playback device in the panel that is in the screenshot. And now the headphones are not displayed there, although they are connected and working.
Question: When installing a new Realtek HD driver, Realtek Windows 7 Manager does not start
I decided to install Windows 7 SP1 64bit. I installed the latest driver (R2.82) from the official Realtek website. There is sound, but there is no dispatcher. And I need him.
In the folder along the path C:\Program Files\Realtek\Audio\HDA, the "executives" also do not start - nothing simply happens.
Before this, I had the latest build of Windows 10, everything worked there, I remember downloading the same driver from the Realtek website and everything was fine with the dispatcher.
I solved the problem by removing this driver and installing the old driver (Realtek Audio Driver V6.6.4.2 for Windows Vista/7 32bit & 64bit.(WHQL)) from the ASUS website, and the dispatcher appeared, everything is fine.
But I still want to get to the bottom of why new driver does not install normally with a working dispatcher on Win7?
Mother - Asus M5A97EVO
FX-6100
8gb
gtx660
Answer: mythorns, I have the same problem on Windows 10, the solution is the same
Quote mythorns:
Question: Realtek driver cannot be installed
Here's the thing:
After reinstalling Windows 7, the firewood from Rialtek is not installed. There is sound in the laptop speakers, but when you insert headphones, the sound continues to go to the speakers. I put it different versions, for 32 and 64 bits, in the device manager with driver “installed” 2 are as follows
Also, after the installation is completed and the PC is rebooted, the Rialtek manager does not appear.
I don’t know what to do, I’ve been making love to him for 3 days now.
Maybe someone knows what the problem is
Answer: Thank you so much, you are simply God. I guess I'm a complete idiot...
Question: Realtek firewood does not work correctly
Hello, I updated to Win 10, and there was a problem with drivers for sound, the point is that my mother is Asus VI Hero and actually downloaded new firewood for Win 10, since the old firewood started up but without the goodies that I need, so when I updated, it seems that the Realtek manager appeared, but in the microphone tab the Noise Gate and Noise Reduction functions stupidly don’t work, the checkbox is checked and the sliders don’t move without this function, I don’t like it, I just need a must-have, on Win 7 everything worked ok, it’s not clear what's wrong. Please help with the problem. I've attached screenshots of what's wrong. Thanks in advance for your help.
Answer: I have exactly the same problem on my ASUS Rampage IV Black Edition, I wrote to Asus support, they didn’t help, they said everything was fine... so for now one option is to roll back to the old drivers, I have a stable version of Realtek 6.0.1.7344.
Question: [Solved] Realtek manual equalizer disappeared in Windows 7
Tell me who knows Why is the ability to manually set equalizer settings missing in Realtek drivers in Windows 7? Can anyone recommend another version of drivers?
There is only a set of presets (rock, pop, live, etc.). Win XP had both presets and manual settings...
Very inconvenient without it! The sound of music and movies can be adjusted in the player, but the player won’t help when playing games, and I don’t like the sound of the available preset options.
I have Windows 7 Pro (final) x32, ASUS P5K motherboard with built-in Realtek ALC883 High Definition Audio Controller. Sound driver version Realtek HD Audio Codec Driver R2.37 (Vista, Windows7 32/64).
Answer:
Quote 9119 :
Question: The "Realtek HD Audio" process is loading the system
The "Realtek HD Audio" process is hanging in the task manager, which is loading the system.
When you remove the process in the manager, the load decreases, but when you restart the laptop after a while, it appears again
Answer: Execute the script in AVZ
begin ShowMessage("Attention! Before executing the script, AVZ will automatically close all network connections." + #13#10 + "After rebooting the computer, network connections will be restored automatically."); ExecuteFile("net.exe", "stop tcpip /y", 0, 15000, true); if not IsWOW64 then begin SearchRootkit(true, true); SetAVZGuardStatus(True); end; TerminateProcessByName("c:\users\Roman\appdata\local\microsoft help\realtek hd\rthdcpl.exe"); QuarantineFile("c:\users\Roman \appdata\local\microsoft help\realtek hd\rthdcpl.exe",""); ExecuteFile("schtasks.exe", "/delete /TN "Realtek HD Audio" /F", 0, 15000, true); DeleteFile ("c:\users\Roman\appdata\local\microsoft help\realtek hd\rthdcpl.exe","32"); DeleteFileMask("c:\users\Roman\appdata\local\microsoft help\realtek hd", "*", true); DeleteDirectory("c:\users\Roman\appdata\local\microsoft help\realtek hd"); BC_ImportAll; ExecuteSysClean; BC_Activate; RebootWindows(false); end.
Execute the script in AVZ
begin CreateQurantineArchive("c:\quarantine.zip"); end.
Send c:\quarantine.zip using the form above the first message of the topic or (if the archive size exceeds 16 MB) to this Mailbox: quarantine
It is PROHIBITED to attach quarantine to messages on this forum!!!
Please follow the rules AGAIN, attach NEW Autologger logs to your message
Question: Not installed sound driver
No sound. I installed the Realtek HD driver, there were no errors, but after reboot there is no Realtek HD manager. There are no traces of what he became.
Windows 7 x64, mother: Asus m4n68tm_v2
Answer: yes, I have a different one. This is me more for informational purposes because sometimes you have to deal with different computers
Question: No sound after updating drivers (Realtek)
Good afternoon
- Windows 7 SP1. I update regularly
- MB: Gigabyte GA-Z87-HD3 (latest BIOS F8)
- Built-in sound card: Realtek ALC887. Equipment ID:
HDAUDIO\FUNC_01&VEN_10EC&DEV_0892&SUBSYS_1458A002&REV_1003
HDAUDIO\FUNC_01&VEN_10EC&DEV_0892&SUBSYS_1458A002
- Right-click on the volume controls in the tray -> Recording devices
- Right-click on the empty white field, check both boxes (Show disconnected devices, Show disconnected devices)
- Right click on the device Stereo mixer -> Enable
- It should turn on, but nothing happens. Absolutely
As a result, there is a red cross on the Windows volume control in the tray and there is no sound.
There are no yellow icons in Device Manager.
The Realtek HD manager does not behave very adequately - when connecting headphones/microphone (I only use back panel in the system manager) - the Relatek HD manager displays pop-up windows where it asks me to indicate what and where I connected. I point. There is no effect.
I noticed that if I set the playback volume in the microphone settings in the realtek manager, then I can hear my voice in the headphones - that is, the sound card is working (there is no doubt that it is working, see below)
After the drivers from Gigabyte, I tried a bunch of others - from the realetka website - from various other sources, I searched by equipment ID.
With all firewood the picture is the same. And by the way, the stereo mixer also does not turn on.
I also updated the drivers for the chipset and that’s it (downloaded all the drivers from the Gigabyte website)
I restored the system, the sound worked as before, but I still can’t change the Playback Devices and Recording Devices.
This is such an ambush.
Answer: Found a solution!
In short, for unknown reasons, the rights to the registry branches that store information about what is enabled and disabled are lost. Firewood has absolutely nothing to do with it.
Executed as administrator
net localgroup Administrators /add networkservice
net localgroup Administrators /add localservice
I rebooted the computer and everything was ok!
(On the English version you will need to run
net localgroup Administrators /add networkservice
net localgroup Administrators /add localservice)
Sometimes users personal computers are faced with a situation where Realtek High Definition Audio Driver for Windows 10 does not work for some reason. Many people simply do not know where they can download and update this driver. There are at least 4 effective methods download and install this software for Windows 10, 8.1, 8, 7, Vista or XP. You can download this software for free in good quality.
Realtek's most famous products are Ethernet adapters and controllers.
AC97 codecs, designed specifically for integrated sound cards, are also popular. The company's products are often criticized. Many users note that the company's sound drivers are inferior in terms of reliability to standard software that comes by default with Microsoft operating systems. Realtek software quite often conflicts with video games and some other programs (for example, Skype).
Popular installation methods
Can download Realtek HD Audio Driver Windows 10 x64 via the official ASUS website. To do this, you need to go directly to the website and find the downloads page. Then you need to do the following:
- enter the name of the ASUS computer model;
- select “Driver and tools”;
- specify the Windows operating system;
- select Realtek Drivers to download.
If there are several driver versions on the page, you need to select the most recent build.
You can also download Realtek HD Audio Driver Windows 10 through the official website of the program, because not all drivers are offered on the ASUS page. The Realtek website offers AC 97, ALC 655, ALC 888, etc. You need to find the download page where you will need to accept the terms and conditions license agreement and click the “Next” button. Select "Global Driver" from the search results to download the appropriate Realtek software for your operating system. This software works with both 32 and 64 bit OS.
Other installation methods
You can install Realtek Audio Drivers via Update Center ( Microsoft Windows Update). This method is suitable for Windows 10 64 bit. You must click “Start”, “Settings”, “Update and Security”, after which the corresponding window should open. Then go to the update center to check for new Realtek Drivers.
To save time and effort, you can try Driver program Talent, which can automatically download and update Realtek Drivers within 2 minutes. You can download the application at official page developer. To install drivers you need to follow these steps:
- Scan your computer. To do this, you need to launch Driver Talent and click the “Scan” button to detect all drivers.
- Update sound drivers All missing, outdated and damaged files will be indicated after scanning. You should click "Repair" to fix the problem with the audio driver, or click "Update" to install the latest build. It is recommended not to update if Realtek is running normally. To avoid unexpected conflicts or software failures, it is recommended to create backup copy old drivers before replacing them.
- To restart a computer. After system restart Windows is new The Realtek audio driver should work normally.
The Driver Talent app does more than just download and update sound card software.
With it, you can restore your system, remove applications, preload software for another PC, discover new hardware, check VR support, speed up your computer, etc.
Loading...
