Today, almost all Lenovo, Asus, Acer, HP, HP Pavilion dv6 or Toshiba laptops have built-in microphones. It's convenient - you can take notes and talk.
But to take advantage of this convenience, you need to know not only where the microphone is located in the laptop, but also how to set it up and turn it on.
The microphone is located in the same place for everyone. Setting up and turning on is also the same - it depends more on the installed operating system than on the laptop model.
In the picture below you can see where the microphone is located in the laptop. It is located at the very top of the screen in the center.
This is very quick guide. You will find detailed instructions with pictures on how to turn it on and configure it, increase sensitivity.
Where to set up the microphone on a laptop
Here I will briefly describe how to set up a microphone. If it doesn't work, you'll find it there detailed instructions with dirks - what to do in this case.
The setup itself comes down to very simple steps, accessible to everyone.
Log into the control panel of your lenovo, asus, acer, hp, hp pavilion dv6 or toshiba laptop and click on the “sound” section.
Yes, I almost forgot - everything that will be written here applies to vista, windows 7, and windows 8, in XP it is a little different.
In the "sound" section, select "recording". Find the “properties” option there.
All settings are made in the parameters “Levels”, “Improvements”, “Advanced”
Where does the microphone turn on on a laptop?
To turn on recording devices in lenovo laptop, asus, msi, acer, hp, hp pavilion dv6, dell or toshiba click on the “speaker” icon in the tray right click bears.
A menu will open. Click on the “recording devices” line. Now select “parameters” and go to “properties”.
There you will see pictures of recording devices. Click on the one you need with the left mouse button and “OK” at the bottom. After that it will be your default
Then right-click on the selected microphone. A menu will appear, and in it the line “enable” - click. That's all. Good luck.
Laptops are good not only for their compactness, but also for their versatility. Many models have a built-in webcam and microphone, allowing you to make video calls or record audio/video without connecting additional equipment. No wires or additional cables are required. The recording quality of the built-in microphone and camera leaves much to be desired, but this is quite enough for the solution daily tasks. Where to look for a microphone in Lenovo laptops?
Where is the microphone?
There are two main ways to find where the microphone is. If the first method did not bring you success, then try using the second.
Method 1.
Inspect the laptop case for a small hole. It can be located anywhere: near the camera, on the side edges, etc. If it was not possible to visually find the microphone, then move on to the next method.
Method 2.
Turn on the sound recording on the laptop and slowly move your finger along the case so that there is a soft rustling sound. The strongest signal will be where the microphone is located.
The microphone does not work well on Lenovo
If the microphone is detected in the “Device Manager”, but does not work well (hisses, hums), then you need to go to the “Control Panel”, find the microphone settings and settings in the “Levels” tab. In Windows 7, you can also activate the optional Echo Cancellation feature.
You can only make the microphone sound clearer if the problem lies in the settings. If changing the parameters does not bring results, then you need to take the laptop to a service center.
Modern laptops have a built-in microphone. This is actually a very convenient device! There is no need to make a complicated connection between the microphone and the laptop, as is necessary on personal computers. There are models of external microphones for PCs; it can be a headset or a simple microphone; accordingly, it needs to be connected to the computer, configured, and then checked.
All of the above procedures can take a lot of time, but since mobile computers There is a built-in microphone, everything is much easier. Today you will learn how to set up a microphone on a laptop. Let's look at a few simple methods.
Support
Before you start setting up a microphone, you will definitely need to find out if this component is present on your device. Of course, nowadays almost all modern laptops are equipped with a microphone, but we recommend that you still check whether yours has a microphone. In order to do this, you just need to take the documentation from your device and read it carefully.
If you don’t have the documents on hand, then you can find out about the presence of a microphone in another way. To do this, you just need to go to the “Device Manager” menu. You can also check whether there is a microphone or not through the Control Panel.
If you are already in this folder, you should find the “Sound” category, and in the new window that opens, select “Recording”. In the menu that opens, you can find information regarding whether you have a built-in microphone or not. If it is, then it will definitely be displayed in the menu.
If your microphone does not work on your laptop, then most likely the drivers are not installed correctly. Or they are not on the device at all.
Choice
So, if in the menu you find that you have not one device displayed, but several at once, then you should determine which device is the microphone. Understanding which device is a microphone is very simple! To do this, you just need to knock on the case where the microphone output is located.
You will notice green stripes where the device icon is installed. When you knock, you will see vibrations on this icon. So we decided - this is the device we will need! Let's move on.
Instructions
Now let's move on to the most basic question - the question of how to set up a microphone on a laptop.
If you have installed operating system“Windows XP”, then the setup should begin by checking the drivers for the sound card. It also happens that the drivers are installed, but the microphone still does not want to work. In this case, you may need to reinstall the drivers, or you will need to look for the problem elsewhere.
You can download the driver for a microphone for a laptop on the manufacturer’s official website, and if you have the disk that came with your laptop, then we recommend using it.
If the drivers that were installed from the disk still do not allow the microphone to work, then most likely they will need to be updated. You will need to go through the “Start” menu to the “Control Panel” menu, and then find the “Sounds and Audio Devices” tab.
In the “Audio” tab, select the audio recording function, then install the device, which is a microphone. Now go to the “Volume” mode and select the “Advanced” tab there. Now open a new window using the “Options” link, then select “Properties”. After completing these procedures, you will notice the inscription “Microphone”, where you will need to check the box, and then be sure to save the settings.
Options
Once all the above settings are set, you will be able to see the volume slider. Now you will need to configure it yourself. If you did everything correctly, then the question of how to set up a microphone on a laptop will be resolved. As you can see, there is nothing complicated about this, the main thing is to do everything step by step. There may be differences in settings between different operating systems, but in reality they differ slightly.
Conclusion
It is important to know that if you plan to use additional programs to work with the microphone (for example, this could be Skype), then you will also need to perform additional settings already in the program itself.
Accordingly, the settings may be different in each program. In order to do everything correctly, the easiest way is to go to the “Instructions” or “Help” section and follow the prompts.
Now you know how to set up a microphone on a laptop. Even if you have a different operating system, you can make settings according to the instructions we recorded or simply use specialized programs to work with the microphone.
Almost every laptop has a built-in microphone, which is very convenient and does not force you to purchase it separately. The microphone on a laptop is most often built in next to the webcam. And if it doesn’t work for you, there may be two reasons: either it’s broken or it’s turned off. In this article, we will look at the easiest way to enable the built-in microphone on a laptop.
Preliminary actions
At the very beginning we need to make sure that the microphone is working. To do this, open “Start”, then “Control Panel”, find and open the “Hardware and Sound” menu, find “Manage sound devices”. In the window that opens, we will need the “Record” tab. You should find a picture with a microphone drawn, a left mouse click will open a menu, we need the “Properties” item. Check whether the device is connected or not. The checkbox next to “Play from this device” must be checked, otherwise activate it and click the “Apply” button. The nagging question of how to turn on the microphone on a laptop should no longer bother you.
Software
Even if your microphone shows no signs of life after setting it up, don’t rush to get upset. The issue may be with the drivers for your laptop; it is quite possible that you will need to update or install them. You need to know your laptop model and visit the manufacturer's website to download latest version drivers. Make a request in the search engine by entering the name of your laptop model. From the proposed options, you need to select a kit for a sound card or a file for sound devices. Download and install this software. After installation, sometimes you need to restart your laptop.
Applications
Many sound cards have programs that allow you to manage audio and microphone settings. To do this, you will need to find it on the Internet and download this software to your laptop, and then install it. If the question of how to turn on the microphone on a laptop does not bother you, but you are interested in adjusting the volume of the recording device, then you just need to increase the levels and add volume to the device.
Laptop PC
How to turn on the microphone on a laptop when it is running on Vista or Windows 7? Open the “Control Panel”. Then you need to find and select the “Hardware and Sound” menu. After the window opens, select “Manage audio devices.” Left clicking on the “Record” button will open a menu. With one click, click on the “Microphone” inscription and open the “Properties” of the microphone. Switch to the “Levels” menu. We see the volume level, which can be adjusted by moving the slider. To increase the volume level, you need to move it to the right. There is also a slider with microphone levels, which will also boost the microphone quite strongly. But at the same time, it will also increase the level of noise, which your interlocutor is unlikely to be happy to hear after just a few seconds of communication. After completing the settings, find the “OK” button, which will allow you to save the settings changes.
Now about how to turn on the microphone on a laptop in Windows XP. If you have Windows XP installed, visit Control Panel, then Sound, Speech, and Audio Devices. In the window that opens, we will need the “Sounds and Audio Devices” menu. From the bookmarks offered to us, activate “Audio”, select it with a left click of the mouse. Under the Audio Recording heading in the center of the window, set the drop-down menu to the microphone labeled USB (assuming it's built into your webcam). Below, below the list, is the “Volume” button. After activating it, a window with three volume controls will open. We are interested in the indicator called “Microphone”. Check the desired column, then set the desired volume level. The higher the indicator, the louder the microphone sound; the lower, the quieter it is. After setting the volume, activate the “Settings” key, under the volume control. Check the box next to “Microphone Boost” and click “Accept” to save the changes. The audio device setup is complete.
How to enable microphone on Windows 8 laptop: details
On Windows 8, setting the microphone to turn on is not difficult. Right-click on the speaker icon in the tray and go to the “Recording Devices” menu. For laptops, the top microphone in the list should be activated by default. Right-click on the top microphone, in the window that opens, go to the “Properties” menu, then to the “Levels” tab. We set the volume indicator to maximum, adjust the gain slider if necessary, it is advisable not to overuse the latter, since the higher the gain, the more noise comes from your microphone. After completing the settings, click the "Ok" button to save the changes. Now you should be heard. Enjoy your voice communication online. We thank each reader for your attention.
Most laptop models and webcams have a device for recording sound - a microphone. It is used not only for voice recording, but also for online communication. Owners of portable devices just need to run Skype program and order a test call to hear your voice and make sure the microphone is working properly. However, there are times when the microphone does not work. How to set up a microphone on a laptop?
Setting up a microphone on a laptop
The first thing to do is check if the microphone is turned on. To do this, click “Start” and “Control Panel”. Next, select “Hardware and Sound”.
A new dialog box will open. Go to the “Recording” tab. The recording devices will be shown here. The one marked with a green circle is a working microphone, ready for use.
If there is not a single device in this tab, it is worth doing next steps. Click “Properties” in the “Recording” tab.
In the “Apply device” section, select “Use this device (on)”.
And the icon will appear.
Where is the microphone located on a laptop?
A fairly simple question that ordinary users ask: where is the microphone on a laptop.
In most cases, the laptop microphone is located on the lower left side of the device's keyboard. However, if you are not sure about this or there is no special symbol on the laptop panel, open the “Sound” section in the “Control Panel” and go to the “Recording” tab. Lightly knock on the case, watching the dynamics jump. This is how we determine the location of the microphone.
Checking and installing the driver
The performance of the laptop also depends on the availability sound driver. To check if you have installed required driver, click “Properties” in the “Recording” tab, having previously selected the microphone.
In the “Controller” section, click “Properties” again.
A dialog box will open. If in the “Device Status” section it says “Your device is working normally,” then everything is fine with the drivers for the sound card.
Adjusting the sound level
Go to the “Sound” window, “Recording” tab, “Microphone”, “Properties”, “Levels”.
The sound quality of your voice to your interlocutor depends on the first indicator. We recommend setting it to the maximum. The second indicator is used if the room is quite noisy.
Loading...
