LAN card Wi-Fi in almost any laptop can serve as an access point, in other words, distribute the Internet to another device. It can be used for this purpose different ways. The simplest of them is to install and configure the mhotspot program.
How to set up mhotspot
Windows 7 has a feature that allows you to use your laptop as a “virtual” adapter. Earlier versions operating system they don't support her. Before starting the program, you will need to make sure that antivirus program, including the one built into the system is turned off. The firewall service, on the contrary, should run in auto mode.
Before you can configure the mhotspot program, you need to open it as an administrator. A utility window will open in front of us. As you can see, the program interface is quite simple. Here you will need to come up with a network name and password to access it. The Share from line allows you to select the connection through which you will connect to the network. You should take care of creating it in advance.
It should be noted that a computer may have multiple wireless connections. You can view information about them in the Network and Sharing Center or by clicking on the icon located at the bottom of the screen. In order for the mhotspot program to work correctly, you will need to change the settings in the one we will use.
In order to make a connection with shared access, in the connection names, click right click mice. From the list that opens, select Status. In it we go to the Properties section. After that, go to the Access tab. Now we mark the line that will help allow other devices to access the Internet on this computer. Confirm the entered parameters with the OK button.
After the settings have been completed, launch mhotspot. In the Share from line, select the connection that you just configured. Next, you can click Start Hotspot, after which the wi-fi distributor will be activated in the laptop. It will also be useful for you to know that there are other similar programs, for example.
It should be noted that a wi-fi card can only be installed in a laptop with a Pentium-4 or higher. If we talk about the advantages of this method of wireless connection, then, firstly, the laptop will work faster than the router, since it has more memory, and secondly, it is much easier to configure. Therefore, with such a device you will not need to purchase an additional wi-fi distributor. You just need to download mhotspot and install correct settings and share information.
Sometimes you find yourself in a situation where a computer has access to the Internet via a local network, a built-in modem or a USB modem, but you need to raise the Wi-Fi network so that you can access the World Wide Web from a smartphone or tablet. The caring Windows developers did not provide any provisions for this case. standard programs or utilities that come with the operating system, so there is nothing left to do but look for workarounds by turning to utilities from third-party developers. One of the best free program on turning your computer or laptop into Wi-Fi router This .
Installation of the program proceeds according to the standard scenario; first, you are advised to familiarize yourself with license agreement(which you can scroll through without looking and there’s nothing interesting there), then select the folder where the program files will be located, indicate the “Start” menu section where the icon for launching mHotspot will be located and allow/disable the creation of an icon for quick launch on the desktop. At the last step, the installer suddenly switches to Russian, highly recommending installing the archiver for Hamster Free Zip Arhiver and the computer “accelerator” SpeedUpMyPC 2014, as simply vital programs for us. What are we culturally refusing, having unchecked all the boxes we see, because we need the mHotspot utility, and not a set of programs with an unclear purpose. Finally, click “Install”, wait a few seconds and launch mHotspot.
Consider that you have already turned your computer into Wi-Fi point access, all that remains is to make the initial settings. First, check the box next to “Don’t show again” in the “Welcome mHotspot” box with brief instructions What should the user do to prevent it from popping up every time the program is launched? Then we move on to setting up the wireless network itself, where you will need to edit the items:
- Hotspot Name - enter the name of the access point by which it can be found for the wireless network.
- Password - enter a password consisting of at least eight characters. I would like to draw your attention to the fact that it will not be possible to create an open access point, so you will have to enter a password anyway. Forgetful people have the opportunity to see what they entered there by clicking “Show Password”.
- Internet Source - you need to pay attention to this point, otherwise the smartphone/tablet will connect to the wireless network, but there will be no Internet. Select from the drop-down list network connection computer with Internet access (in my case it was “Connect via local network"). If the “Internet” does not appear the first time, you can go through the items one by one until you find the item you need.
- Max Client - the maximum number of devices that can be simultaneously connected to a wireless access point, but no more than 10.
Finally, click Start Hotspote, after a few seconds the local Wi-Fi network will start working, which will be indicated by a green ON sign. The main thing is not to forget to enable physical/software damage Wi-Fi module. All that remains is to find your wireless network on your smartphone and connect to it.
To stop the wireless network, you need to click the “Stop Hotspote” button or close the program.
At the bottom of the mHotspot main window, interesting statistics about the wireless network are displayed, namely the number of connected devices, the amount of data transferred and the connection speed.
Those who like to delve into the program’s settings can go to the “Settings” section, although there is nothing particularly interesting here. Those who wish can allow the local Wi-Fi network to be automatically launched and raised when the operating system starts (I don’t recommend doing this; it’s better to start everything manually when needed). You can also allow mHotspot's main window to always remain on top of other programs, automatically check for updates, and finally automatically update statistics about wireless network connections.
If your laptop is connected to the Internet and you need to quickly raise wireless Wi-Fi network, when there is no router at hand, then the mHotspot program becomes a real lifesaver. You need to spend a few minutes to get everything working, by entering a couple of letters and numbers, which even the average computer user can handle, then everything will work almost seamlessly automatic mode. I strongly recommend that you use the mHotspot program if you need to make a Wi-Fi access point from your computer.
Of course, even in the ointment there was a fly in the ointment; windows periodically pop up in large numbers with a warning about the impossibility of reading some data, but at the same time the program continues to work normally.
Very important on tablet computer have access to the Internet. After all, without it you will not be able to download dozens interesting applications from Google Play(formerly Market). Of course, the easiest way to use Wi-Fi router. But if you don’t have one, then pay attention to another method that requires a laptop (or regular computer) with built-in Wi-Fi adapter, connected wired Internet (via RJ-45 port) and a special program. In general, let's figure out in detail how to set everything up...
1) First you need to make a point out of a laptop (desktop computer) Wi-Fi access. For convenience, we will use special program designed for this purpose. You can download it from our portal - mHotspot (size - 5.4 MB).
We extract (using any archiver) the program from the archive and run it. We have this window in front of us:
Everything is simple here! Button " START» to enable wireless connection. " STOP» — respectively, to turn it off. In chapter " Setup Hotspot» configure the connection name and password. There is nothing else in the program.
2) Open " Network and Sharing Center» (Start ›› Control Panel ›› Network and Internet ›› Network and Sharing Center). On the left side of the window, click on the link “ Change adapter settings«.
You will see a list of network connections. We are interested " Wireless network connections". I have two of them, you may have one or, on the contrary, more!
Return to the mHotspot program, click on the button " Start". And let's see what wireless connection begins identification remember its name! Remember?! Then click on the button “ Stop"in our program.
3) Now let's set it up general access for Internet connection (wired). Read the next sentence very carefully. If you configure it incorrectly, there will be no Internet on the tablet!
If you have VPN connection to the Internet, then go to its properties. If your Internet works through a local network, then go to the properties of the local network connection (LAN/Network).
In the connection properties, go to the “ Access". Check the box " Allow other network users to use your Internet connection of this computer "and select the one you need wireless connection(which was previously memorized). And click " OK«.
After that, turn off given internet connection and reconnect!
4) We return to the program again. Click on the button " SETUP HOTSPOT", enter the name of Wi-FI in the column " Hotspot name" and the password in " Password"(minimum 8 characters, preferably numbers only).
Confirm the changes by clicking on “ OK". All you have to do is click on the “ START". The connection will appear in the list of current connections. Under the name of your access point it should be indicated - " Internet access". If not, then most likely these are not the correct settings.
5) Now on your tablet computer go to Settings >> Wireless network›› Wi-Fi. We find your connection, enter the password. The tablet should automatically configure itself and gain access to the Internet. If it doesn't work the first time, try rebooting the tablet!
When the Internet is not needed, press the button “ STOP» in the mHotspot program. For reuse You will need to re-enter your name and password in the utility. In general, that's all! If something is not clear, watch our video tutorial on this article (link above)!
mHotspot is a small but very useful program that turns your laptop into a full-fledged access point. You no longer need to buy expensive routers, set them up for a long time, and then repair them. Just download mHotspot , install and run. Next, all you have to do is come up with a name for the access point, create a password and determine the number of connected devices.
Please note that the program does not require any special hardware to operate correctly. All that is required to distribute the Internet is the program itself (well, the availability wi-fi adapter on your computer). IN latest versions mHotspot now also has the ability to determine the “power” of the created “hotspot”.
Of course, many users are concerned about the issue of security - can the utility be trusted to transfer secret data? MHotspot provides a reliable and, most importantly, secure connection thanks to several encryption algorithms.
Other features of mHotspot for Windows include:
- Support for 3G and 4G, LAN and Ethernet protocols.
- Simplicity and ease of setup. There are no confusing options here; even a beginner can figure it out.
- Allows you to select not only the point name and password, but also the MAC address.
- If necessary, it can also work in background mode. We minimized the application on the laptop and connected using another device, for example, a smartphone.
- Distributed absolutely free. Installation and further use of mHotspot will not require financial investments.
- Keeps detailed statistics of spent traffic and all connections.
- Wi-Fi is distributed not only to a computer or laptop, but also to mobile devices.
It would seem that the Internet is incredible useful thing– what difficulties might arise with it? But they arise easily; it is enough to have not a router in your home, but a direct Internet cable designed to connect to a laptop and computer, but certainly not to your brand new smartphone or tablet.
In such a situation, use mobile internet, of course, is not an option. And here programs that turn your laptops into routers– this is a great idea! For example, a utility such as mHotspot, which we will now discuss.
About mHotspot:
One of the popular programs that is still being updated. As you can understand, the developers are attentive to their brainchild and fix problems pointed out by users.
This utility was developed for OS Windows, and it is compatible only with the most popular and new versions - Windows 7, 8, 8.1 and 10. It is not recommended to use it with older versions, as operation problems may occur.
Initially, mHotspot was only available on English language, but our RuNet users corrected this flaw. Therefore, you can now use it in Russian without fear of not understanding any of the functions.
The program is quite compact, if not small, and convenient. It has very few functions, only the most necessary ones are present. This allows mHotspot to remain one of the simplest, yet most functional programs among its competitors.
It is distributed free of charge, so you should not download it from sites that offer you to buy this utility. Better yet, use this blog to mHotspot download in Russian for free.
Setting up mHotspot:
As mentioned above, the functionality is quite small, so it will be much easier to understand than with similar programs for setting up a virtual network. But the excellent and uninterrupted operation of the virtual router more than pays for this fact.
First, install mHotspot on your computer. Agree to the license agreement, select the folder where you will place all the files, in general, standard operations.
But now the cunning installer will offer you to install Hamster Free Zip Arhiver (archiver) and SpeedUpMyPC (supposedly a computer accelerator). Don’t believe him, uncheck unnecessary boxes and complete the installation of mHotspot specifically by clicking on Install. After all, you don’t want to clutter your system with unknown programs, right?
Now launch the program and you can work with its settings.
The first step is to come up with a name for your network. Come up with it and write it down in the box.
Once you come up with a password, select your network connection. If it is selected incorrectly, the gadgets will connect to Wi-Fi, but the Internet will not work on them. Therefore, go through all the options until you find the one you need.
Finally, specify the number of clients that will be able to connect to the network. It could be three, five or seven. But no more than ten!
Now you can safely press the Start Hotspot button and catch Wi-Fi with your smartphone or tablet!
To stop working, click Stop Hotspot accordingly.
Easy to set up and easy to use, the program will ensure that your gadgets work comfortably with the Wi-Fi network it creates.
A real find if you need to quickly set up a network and don’t have the necessary equipment nearby.
Sometimes suspicious windows will appear informing you that some data cannot be read, but feel free to close them, since mHotspot will work fine in any case.
Loading...
