How to make your own phone case: DIY wooden smartphone case with your own hands. DIY wooden iPhone case How to make wooden phone cases

We present to your attention a selection of creative ideas with step-by-step master classes for making phone cases with your own hands.

Mobile phone case made of paper using origami technique (budget option)

You will need: a sheet of A4 paper of any color, PVA glue.

Master Class

1. Lay a sheet of paper horizontally.
2. Place your phone on top.
3. Wrap the phone to the end of the sheet.
4. Fold the bottom of the paper up to the phone several times.
5. Fold the triangles at the bottom of the sheet up.
6. Secure the folds with glue.

You will need: elastic bands of 3 colors in the amount of 500 pieces, a hook, a weaving machine (it should have 2 rows: the holes in the bottom row should point to the right, and the top ones to the left).

Master Class

1. Slide the elastic bands from the top row of the second pin, then cross them onto the third pin of the bottom row.
2. Place the elastic bands crosswise, from the second pin of the bottom row to the third pin of the top row.
3. Place the elastic bands in the same way from the third pin of the top row to the fourth pin of the top row. You should get three crosses.
4. Pass two pins through the center and weave four more crosses in the same way. You should get four crosses and there should be two free pins left at the edges of the machine.
5. Place rubber bands on the top and bottom pins of the next row, facing oppositely. In the same way, put rubber bands on all the pins of the previous row.
6. Turn the machine vertically towards you so that the top pins are facing you with their heads.
7. Place the first elastic band on one bottom and one top without crossing.
8. Attach without crossing the remaining elastic bands along the top row - one after the other, without missing the two middle pins.
9. Make the bottom row in the same way, connecting with an elastic band on the other side.
10. Using a crochet hook, remove two rubber bands from the bottom row of each pin.
11. Skip the middle pins, there should be two rubber bands left on each pin.
12. Take elastic bands of a different color and make the next row in the same way as the third.
13. Remove the two bottom loops in a circle and again put on elastic bands of a different color in a circle, then remove the bottom loops.
14. Make two rows in the same way, alternating colors. (For one row, put the loops on once, then remove).
15. Make a hole for the screen in this way: turn the machine vertically, the bayonets of the left row should be facing you. Remove the bottom elastic from the third pin of the left row and place it on the fourth. The last loop should cross over to the seventh pin.
16. Remove the remaining loop from the middle five pins. There should be three pins left with rubber bands on each side.
17. Knit the next row in this way: start from the third working pin to weave elastic band by elastic band clockwise. Leave five pins on one side.
18. Remove the bottom elastic bands, there should be two loops on the pins.
19. Knit another eleven rows, alternating colors in the same way.
20. Knit a row clockwise, filling all the pins.
21. Remove the bottom elastic bands from the pins, but do not remove the five ones that were not used before.
22. Skip the two working pins in the row where the unknitted pins are, slip the lowest stitch off the third pin and place it on the next pin. Do this until the last two pins are empty. Knit one row.
23. Take the machine vertically, remove the bottom loop from the right row of the second working pin and put it on the next bayonet. The last loop should be placed over the fourth working pin.
24. Remove the bottom hinges from the third and second pins.
25. Place the loops in a circle, leaving the two pins empty, then remove the bottom loops.
26. Slide the elastics onto the next row using all the pins. Remove the loops and do not touch the pins, which have two elastic bands.
27. Swap the top and bottom loop on the first pin, transfer the top loop to the next pin. Connect the structure.
28. Remove one bottom loop from the next two pins and transfer them to the next pin.
29. Knit a row in the usual way.
30. Close the cover this way: make a row of crosses as in the beginning, using all the pins. Make the next row between the opposite pins in crosses.
31. Remove the bottom loops and leave the elastic bands used to make the figure eights. There should be three loops left on the bottom pin.
32. Place the bottom loop of each pin onto the next pin. Make the next row in the same way.
33. Make a knot with an additional elastic band on right side, then remove the cover from the machine. Hide the knot and straighten the protruding loops, and then put the case on the phone.

Hot glue mobile phone bumper case

You will need: glue gun, nail polish, tape, parchment paper.

Master Class

1. Take parchment paper and cover the phone so that back panel And side panels there were no joints.
2. Secure the joints with tape in the screen area.
3. Mark the places where the camera, sockets and buttons are located.
4. Apply hot glue to the sides of the phone, then outline the designated areas.
5. Make a pattern on the back of the phone so that the pattern connects to the side of the phone.
6. Wait until completely dry.
7. Apply your favorite color of nail polish and color in the design.
8. Wait until completely dry.
9. Put a case on your phone.

Balloon mobile phone case (budget option)

You will need: balloon of your favorite color.

Master Class

1. Take a balloon, inflate it and do not tie it.
2. Place the phone screen side up on top of the ball.
3. Press the phone into the ball, gradually deflating it.
4. Release the ball when there is little air left and continue pressing the phone into the ball.
5. Wait until the ball covers the phone, this is a sign that the case is ready.

You will need: a notepad with an elastic band to the size of your phone, a stationery knife, a ruler, glue, felt, a pencil, cardboard, a narrow rubber band.

Master Class

1. Cut out the sheets and sides of the notebook using a utility knife.
2. Divide one side of the notebook in half, marking with a pencil.
3. Cut along the line to the outer grain of the notebook cover using a stationery knife, then cut a strip half a centimeter wide in this place for the future fold.
4. Glue the inside sides of the notebook cover.
5. Trace the notebook cover onto the felt and cut it out.
6. Place the felt on the inside of the notebook cover, then cut the felt along the side fold.
7. Glue a felt blank to the notebook cover.
8. Outline the phone on a piece of cardboard, then cut out the blank.
9. Glue the cardboard to the felt and cut it to the desired shape, leaving a centimeter from the cardboard.
10. Cut two corners of the felt on each side, then glue the corners.
11. Glue two elastic bands across this blank.
12. Glue the blank onto the folded outer half.
13. Put a case on your phone.

You will need: a sheet of cardboard of any color, scissors, glue, marker, eraser.

Master Class

1. Draw the phone twice on cardboard at a distance of half a centimeter and cut it out.
2. Make two folds along the lines in the center of the workpiece.
3. Glue one side of the case to the back cover of the phone.
4. Attach a thin elastic band to the case so that the case can be closed.

You will need: felt of any colors, needle, thread, glue gun, scissors, ruler, pencil.

Master Class

Fabric mobile phone case

You will need: thick fabric, thread with a needle, acrylic paints, colored paper, scissors, glue, stencil, ruler.

Master Class

1. Measure the dimensions of the phone, use a stencil to cut out two identical blanks with wavy edges.
2. Draw SpongeBob's face on one blank.
3. Make a sponge outfit out of colored paper and glue it on.
4. Sew the pieces together from the wrong side.

Leather mobile phone case

You will need: leather of any color, scissors, clips, thick thread, cardboard template, pliers for installing eyelets, two gypsy needles for decoration (two aiglets, decorative thread), pen, ruler.

Master Class

1. Measure the dimensions of the phone, add a centimeter to the length, and two to the width, remember the parameters.
2. Make two identical leather blanks with the required parameters.
3. Round the corners of the workpieces.
4. Make round small holes on the cardboard template with a spacing of 5mm.
5. Fold the leather blanks with the insides facing each other and attach the template.
6. Use tongs to make holes along the bottom and sides. Secure the template with clamps.
7. Place two needles on the thread on both sides.
8. Sew from the side in this way: go through the first hole with one needle, straighten the thread, then sew in turn with two needles, pulling them into one hole, but in different directions.
9. Sew the entire cover, then fasten the thread several times.
10. Make two through holes with a distance of a centimeter on the top of the cover.
11. Place eglets on the ends of the decorative thread.
12. Thread decorative thread through the holes and tie a bow.

You will need: yarn, scissors, glue gun, tape, parchment paper, ruler, baking paper.

Master Class

1. Wrap the phone in parchment paper.
2. Secure the folds and seams with tape on the screen side.
3. Make a base on back cover phone, using a glue gun, covering the entire back and side surface with hot glue except for the camera hole and microphone.
4. Wait until it dries completely and remove the base from the phone.
5. Wind the thread parallel to the ruler, taking into account the width of the phone.
6. Apply glue to one edge of the ruler and glue it to the base.
7. Wait for it to dry completely and cut the thread along the opposite edge of the ruler, then cut the thread from the skein.
8. Fill the entire cover with fibers of yarn, leaving 5 mm between rows.

You will need: beads of any colors of the same size, glue gun, toothpick, cardboard.

Master Class

1. Place some beads on the table.
2. Apply a bead of hot glue to the cardboard.
3. Dip the tip of a toothpick into a drop of hot glue.
4. Touch the toothpick to the bead.
5. Dip the bead into a drop of hot glue.
6. Glue the bead to the phone.
7. Glue the rest of the beads on the back and side covers of the phone in the same way. Please note that the work is painstaking and will take a certain amount of time, but you need to work at a pace, since hot glue hardens quickly.

You will need: rivets (to cover the entire phone you will need 80 rivets, partly as in the picture - 31), glue gun, cardboard, tongs or tweezers.

Master Class

1. Prepare the rivets by placing them with the sharp part facing up.
2. Take the rivet with tweezers.
3. Apply a small bead of hot glue to the rivet.
4. Glue the rivet to the phone.
5. Glue all the rivets in this way.

You will need: cosmetic glitter, brush, hairspray, clear nail polish.

Master Class

1. Spray hairspray on part of the back cover of the phone.
2. Apply glitter to the tire using a brush.
3. Apply glitter quickly as the polish dries and the glitter may not stick.
4. Seal with a good coat of clear varnish.
5. Let it dry.

You will need: beads, glue gun, tongs or tweezers.

Master Class

You will need: cotton or wool thread for knitting (white, black), needle, hook (clover 1.8 mm), black marker, cotton wool.

Modern people can no longer imagine their lives without mobile phone. We use it absolutely everywhere: at home, at work, while traveling. For some, it even replaces a computer and TV. In order for your smartphone to retain its appearance for as long as possible, you need to think about protective elements, for example, a handbag or case in which you will carry it.

You can make such an element with your own hands from available materials and it will be in no way inferior to the store-bought one, but on the contrary, you will have an original, unique accessory for your “assistant”.

So, let's talk about how to make a phone case.

Materials for the case

Such an accessory can be made from anything: wood, silicone, leather or thick fabric, or felt. On the Internet you can find many ready-made patterns and templates for making a case from available materials.

How can you make a case?

Sew a cover. If you know how to work with a needle and thread at least a little, then using the finished pattern you can sew a real organizer or a book case for your phone.

A simple combination of materials and their colors can achieve originality in execution. These cases last a long time and look very unusual and functional.

You can make a case using silicone glue. To make a silicone phone case with your own hands you will need:

• glue gun;
• silicone sticks;
• parchment;
• masking tape;
• pencil.

Instructions:

• Wrap your gadget in parchment and secure with masking tape.
• On the body of the smartphone, transfer the pattern you like onto paper using a simple pencil. When creating an ornament, mark all the buttons and connectors on paper.
• Take a glue gun and repeat the pencil drawing with silicone glue. Let it cool and dry.
• Carefully remove the resulting cover and paint it with bright colors. The bumper can also be decorated with beads, rhinestones, sequins, etc.

This accessory is quite easy to make, you only need a little practice, and it looks very stylish. The only downside that can be noted is that if you don’t have a glue gun, the idea won’t come true.

New case from old

How to decorate a phone case with your own hands? Easily! Such an accessory can be made using decorative elements. Take a ready-made simple case and decorate it with rivets, rhinestones, magazine clippings, colored ribbons, buttons, in general, with anything you want.

Using colored tape you can bring an old white case back to life. Just cover it with even multi-colored stripes and you’ll have a rainbow in your pocket. You can update the accessory in half an hour, but you will have to tinker a little with the glue.

Wooden case

How to make a wooden case for a smartphone? Of course, it is almost impossible to create a completely wooden case yourself if you do not have wood carving skills, but it is quite possible to use this natural material as decoration.

Make neat diamonds, squares or triangles from wood chips and cover the PU case with it. You can also use small twigs as decorative elements.

Let us immediately note that this option is not very convenient. Due to the roughness of the surface, it will always catch on clothes and this will significantly reduce its service life.

Fabric cover

A smartphone case in the form of a handbag can be easily made from old jeans. Cut the fabric to the required size, sew it on three sides and decorate it to your taste.

Fantasize, improvise and invent! Having made a phone accessory with your own hands, be sure that it is unique and you will not find even a similar option anywhere else. IN Lately, accessories self made are very in demand and popular, as handmade things are beautiful and original.

If you do not know how to sew, then choose another manufacturing method from those listed above or your own. A gadget bag can be knitted, woven from rubber bands, or made from thick paper.

Photos of DIY phone cases

Wood is a material that never goes out of fashion. Recently, due to the dominance of plastic and other “high-tech” materials, wooden things have become a sign of style. In addition, wood is a very pleasant material to the touch. Therefore, it is quite logical to make something from it that we often touch. I'm talking about a smartphone case. In our case, this is an iPhone, but this is not at all important. A wooden case for a smartphone can be made different ways: cut on a machine, glued together from parts cut on a machine and made by hand using carpentry tools. Not everyone has machines, but not everyone has hands (potentially), so we’ll tell you about the third method.


First you need to take a wooden block a little more phone and saw off two thin plates from it. These will be the front and back walls.


Then we cut out the sides from wood to a size slightly thicker than the phone.


We fasten these blanks with wood glue and leave them to dry for a day.


Further processing can be carried out in different ways. The most common method is staining and varnishing. But if you have a desire to make a truly original case, here are examples different materials and processing methods: on the left is a case made of amaranth, covered with colorless wax, in the middle is made of oak, soaked for 5 minutes in black Rubio Monocoat oil, on the right, also made of oak, kept for 15 minutes in clear Rubio Monocoat oil. After processing, we attach a leather clasp with a sewn-in magnet to the case. We drill a hole in the case for the second magnet and attach it there with glue.


The wooden iPhone case is ready.

Wooden cases with engraving look more expensive and unusual than standard models made of plastic and silicone. This accessory will help you protect your smartphone from damage and dust. At the same time, in open access What remains is the screen and the necessary elements: camera, buttons, sensor.

Types of custom-made wooden covers

This section contains cases different types for your iPhone.

What design options are available:

• Name engraving. Order a wooden case with your name as a gift for a friend, colleague, or loved one. Inside there is a “Sports style” option: you can add a number and imitate the inscription on the team uniform.
• Your drawing. Create the perfect layout yourself or contact our designer. By clicking “Start creating”, a full-fledged online designer opens in a separate window. Here you can draw, upload pictures from social networks, choose ready-made clipart - we will make any engraving on a custom-made wooden case for you.
• Case made of different types of wood. A sophisticated and very effective version of the case with your design. We will divide your picture into several parts, cut them out of different types of wood and assemble them like a puzzle.

You can also choose the color of the base - bamboo or mahogany. Cases with a surname can be complemented with a pattern; stars, triangles, flowers and other elements are available.

What are the advantages of laser engraving?

Laser engraving of wooden cases is the way we transfer any of your designs onto a wooden base.

Why we offer it:

• You can transfer high-resolution images. The laser is a high-precision equipment, and it is capable of repeating the most small parts drawing.
• Fast process. It only takes seconds to make a wooden case; the main thing is to prepare a layout based on your photo or picture.
• The drawing cannot be erased. The laser removes the top layer of wood, and the picture turns out to be in relief. It will remain unharmed the entire time you use the case.
• The price does not depend on the circulation. The laser does not require blanks, cliches, etc., so you can order any number of covers from 1 piece and not overpay for the complexity of the work.
• You can make a batch of identical accessories. If you require a series of custom engraved wooden cases, the laser will accurately reproduce even a complex design.

Order a wooden case from LastPrint: why is it convenient?

On this page you can create a wooden case with any desired text or picture.

What do you get when ordering:

• Convenient delivery throughout Russia. We will send the finished accessory to any city via SDEK or 1st class Mail.
• The options you need in one place. You can add glass or screen film and gift wrap to the case: this way you will save on shipping and save time.
• The ability to pay in any way and at any time - immediately or upon receipt.

To send the desired print for work, select your smartphone model and design from the list. We accept orders for the production of wooden covers by phone or online.

Nowadays, a lot of accessories have been invented for various gadgets. There are special keychains and pendants, cases and laces, not to mention stickers and decals. However, if we talk about cases, what are we used to? Moreover, they are made of leather, plastic or wool. However, as it turns out, you can use other materials too!

Of course, you can guess this yourself - after all, technology is moving forward, which means that not only leather cases can be seen here and there. But the designers propose something completely strange - making a case out of wood. Could any of us have come up with this idea? Probably, but not so many people even think about the fact that the case does not have to be made of soft materials. Be that as it may, here we see exactly the wooden cases invented for such fashionable now iPhone gadgets- they are made of hardwood and bamboo, and there are a variety of colors - from dark wood to very light. It is also worth saying that mobile cases are designed for several brands of phones - they will also suit iPhone Touch, and iPhone Nano, and iPod Classic.

The cases look solid, beautiful and new, each has a personalized number, but another question arises - is it convenient to wear such a gadget? In theory, the case was invented so that the phone does not get scratched, if it falls, it does not break, and it is protected from dirt and dust. All these points apply to this project, but is it even convenient to keep the phone in such a case? As they say, you won't know until you try. Therefore, let us inform you that the price of the cover is $40.