The iPhone does not see the router. What to do if iPhone does not connect to Wi-Fi?! Backup - saving your phone at the right time

Naturally, 3G technology is now widespread, and iPad tablets are no exception. However, a connection via Wi-Fi is also necessary if, for example, the 3G card runs out of funds, or on an international trip, where to use mobile internet extremely unprofitable.

1. try to reset the pairing. To do this, you need to follow the path “Settings” -> “General” -> “Network”, after which the iPad moves the user to the Wi-Fi source management menu. Here you need to select “Forget” this network" and try to connect again;
2. reset current network settings. This method is even simpler - just go to the “Basic” tab in the settings menu and reset the network settings. As a rule, most connection problems are solved in this way, but in this case all saved connection passwords are also lost;
3. change region. The connection problem can be resolved by going to settings wireless network Wi-Fi and changing the region there from Russia to the USA. Also, instead of automatic location detection, it is better to choose channel 1 - in the future this will contribute to more stable operation of the Wi-Fi connection.

One of these methods solves the problem in 90% of cases. If the above operations failed to restore the connection, it is worth checking the settings of the router and the router.

Possible problems with wireless reception

Reason incorrect operation iPad with Wi-Fi is considered flawed by many users operating system and software weaknesses. To a greater extent this, of course, applies to iOS 7 version. According to many experts, there is no problem with the iPad hardware.

The Apple designers themselves claim that the wireless connection problem can always be solved by resetting the settings, which once again confirms that the essence of the problem lies in the software.

Most experts agree that the main reason why the iPad stopped seeing Wi-Fi, as well as low download speeds, is the energy-saving Broadcom BCM4330 chip embedded in Apple equipment since IPHONE output 4S.

Wi-fi combined with a bright screen makes you feel iPad battery very quickly, and the Broadcom chip is the best way, according to the company’s engineers, to “extend” the life of the gadget. Apple designers recommend what to do if the iPad 3 does not see wifi router- should be updated immediately software devices, thus freeing up more battery resources for Broadcom.

Video: iPads do not connect to Wi-F network i

Incorrect router configuration

The problem is often not where they are trying to find it. In some cases, the iPad cannot connect to a wireless network because the router is not configured correctly. Owners of Apple products should avoid routers with an Astheros chip - the iPad constantly conflicts with them.

With full confidence that the tablet itself is configured absolutely correctly, you should perform a number of operations with the router:

• Try to update its software by connecting via USB port to the computer.
• In the router settings, change the encryption type to double (WEP to WPA/WPA2).
• Update the IP address being used (the “Renew Lease” tab).
• Increase the brightness level in the router settings.
• Reboot the router.

If you are using a 3G router, and the problem is that the iPad sees Wi-fi, but does not connect, you need to check the status of the SIM card, because it may turn out that it simply ran out of money or it itself has failed and requires replacements.

Checking the router settings and setting up the network

In case of a crisis of ideas and a lack of understanding of what to do if the iPad 2 does not see the Wi-Fi router, you can manual setting network, and also check whether the current router settings are suitable.

It is possible to do this in one of the following ways:

1. check if the operating frequency in the router settings is 802.11n. This frequency is not suitable for operation Apple tablets. If it is selected as active, it must be changed to any other.
2. check that the router does not use ipv6. If this protocol is used, you should try to disable it through the settings.

Apple products are very capricious regarding Wi-Fi and you need to carefully monitor the router settings, the company’s engineers themselves admitted this. However, the problem is being actively discussed, and the company promises to minimize consumer inconvenience in new versions of the software.

Setting up and connecting iPad to Wi fi network

All wireless network settings on iPad are located in the Settings menu. Here you need to select the Wi-Fi sub-item. If everything works correctly, you can see a list of networks available for connection, from which you should select the one you need. A pop-up window then prompts you to enter your Wi-Fi password.

Photo: Synchronizing iPad with iTunes via Wi-Fi

When you click on the blue checkmark, you can see basic information about the connection. If the network does not work, most likely the problem is in the settings of the router itself, but by changing the connection characteristics you can also achieve a result.

True, only the most experienced users can change the IP address and subnet mask.
This is where you can find the “Forget this network” option to reconnect to the source.

Connection problems most often occur with iPad mini. Considering that the model is quite new, many simply do not know what to do if the mini iPad does not see the wifi router. The fact is that the small iPad has a rather fragile structure.

According to statistics, in 70% of cases the mini iPad does not see the network due to mechanical damage caused by the owner. In the event of an impact or severe shock, the WiFi module may partially or completely rupture.

In this case, repairs are required, and, sadly, quite expensive.

In other cases, the reason for refusal iPad connections mini can be:

• Failure of the module piping that occurs due to moisture penetration.
• The antenna is faulty and needs to be replaced.
• Full-scale corrosion, also a consequence of moisture ingress.

Therefore, if none of the methods listed above to connect to WiFi helped, you should take the tablet for a warranty quality check.

Can't see iTunes over Wi-Fi

Problems with communication via Wi-Fi occur not only with gadgets, but also with iTunes. There are often cases when iTunes, when connected wirelessly, either does not see the connected device at all, or sees it, but quickly loses the signal, depriving the user of the opportunity to synchronize.

Solve this problem for the operating room Windows systems A simple restart of the program can help, performed as follows:

It is also important to ensure that you do not delete the process completely, because in this case you will definitely no longer be able to connect to iTunes.

If this does not help, you can try other options:

1. check if the tablet and iTunes are actually connected to the same network or if something happened automatic connection to another source.
2. turn off data transfer cellular networks, leaving only the WiFi connection active.
3. configure synchronization manually by following the path “Settings” - “General” - “Synchronization via WiFi”.

So, there are a great many options and reasons why an iPad may refuse to work with WiFi, but instead of immediately paying a large sum for repairs, it is better to first check all the settings of both the tablet and the router. In most cases, simply rebooting the device is enough to restore the wireless network.

Articles and Lifehacks

Owners Apple devices rarely encounter any operational problems cellular communications or Wi-Fi - of course, if they are not caused by physical damage. However, there are sometimes complaints that Wi-Fi doesn't work on iPhone, or it does not work correctly - for example, if data transfer is very slow, or routing failures occur.

Our article is devoted to the reasons why this module may not work, as well as to finding ways to solve this problem.

Why might Wi-Fi not work on an iPhone?

Sometimes our mobile device simply cannot connect to any of the available Wi-Fi networks. It is difficult to clearly name the reason for this failure. Most often, the problem can be easily resolved after resetting the network settings, or after a simple reboot of our mobile device.

However, it happens that problems are related to the hardware of the smartphone. If this is the case, you need to contact service center Apple. Well, before that, try to provide “first aid” to our device.

What to do if Wi-Fi doesn’t work on iPhone?

So, the most logical and obvious method of “first aid” seems to us to be a regular reboot. She can easily cope with problems that are temporary. All you need to do is press and hold the Power button for a few seconds.

It happens that the device freezes. In this case, you need to simultaneously hold down Power and Home for about 10 seconds. After this, the device will be forced to shut down. This can also help if it is due to incorrect settings.

If Wi-Fi still doesn’t work on your iPhone, you need to try resetting the network settings. Please note that during a general reset, all important data from our device will be deleted - including passwords, IP address, etc. This is why it is recommended to reset only the network settings.

To do this, go to the main settings of our device, the “Reset” item, and select the “Reset network settings” option. This will help get rid of possible errors in the data. Now you need to try turning on Wi-Fi again. If this, again, does not help, move on to the next step.

Unfortunately, not every user knows why it is necessary backup information. However, this function was invented for a reason, because it allows you to save the most important data. Cloud storage is usually used to store them. iCloud service, however, especially in case the Wi-Fi connection does not work (and, accordingly, the Internet does not work), it is recommended to take care of an additional copy in the iTunes library. Now, if something happens to our settings or we need to reset them, we can easily restore all important information.

So, resetting the network settings did not help us. This means that we will need to completely reset all settings. There are widespread cases where, after such a reset and full recovery Wi-Fi data starts working. Unfortunately, there are also cases where problems are caused precisely by errors within the backup copy. In other words, after a general reset we will be able to connect to Wi-Fi, but all information will have to be restored manually, which will significantly slow down the process.

If the problem is still not resolved, you can try rebooting our router. The same can be done at the very initial stage. Of course, it’s very convenient if you have it at hand desktop computer, and you can immediately check whether the failure is caused by problems with the router.

If the connection occurs, but the speed is very low and the problem is not related to the provider, you can try working with the DNS server settings. Of course, this will require some experience. If the problem has not been resolved, you need to contact a service center or replace the router.

The problem when the iPhone does not connect to WiFi or does not receive WiFi is one of the most common difficulties among owners of Apple gadgets. Why your iPhone does not see or does not search for WiFi at all, and what to do in this situation - see the instructions below.

Sometimes the iPhone does not connect to Wi-Fi because the owner of the iPhone 4, iPhone 5S and other smartphone models entered the wrong password. What to do in such cases? The solution to the problem in this situation is the simplest: enter the password again, filling out the corresponding field more carefully, double-checking whether the keyboard layout is correct.

You can also try to enter the password on another device, and if it turns out that it is correct, but the Apple gadget failed to connect to the network, then your iPhone does not see WiFi for another reason.

An easy way to restore Wi-Fi on iPhone

Another easy way to connect to the Internet when the iPhone does not see the network is to force a reboot of the device. To perform it, you need to simultaneously press 2 buttons - “Home” and “Power”. If after rebooting the smartphone still does not find the network, obviously the problem lies somewhere else and is more serious.

Reconnection as a way to catch the network

If your iPhone 5S stubbornly refuses to see the network, and you cannot understand the reason why this is happening, try reconnecting the device to the Internet one or more times.

This method usually solves the problem when iPhone 4 does not connect to famous network. Although, if you have a different version of this gadget and the same problem occurs - for example, iPhone 5 does not connect to the Internet - you can also try using the tips that will be given below.

So, if the iPhone manages to find the network, but does not connect to it, follow these steps in sequence:

1. Through the gadget menu, enter the Wi-Fi settings.
2. Having selected a network that the device sees but does not connect to, click on the “Forget this network” button.
3. Look for other Internet channels and try to connect to the wifi network again. If after this your gadget does not want to search for other networks, then the problem is again not solved and the reasons lie elsewhere.

Resetting the network settings is one of the surest methods to establish a connection to Wi-Fi

If all other methods of Wi-Fi failed positive results, all you have to do is try to reset network settings, because you don’t want to connect home Internet, if the iPhone 6 or other models of this gadget are so convenient to use the Internet.

You can reset your network settings by following these steps:

1. In the “Settings” menu, go to the “General” tab, then “Reset”.
2. Click on “Reset network settings”.
3. Confirm the reset by clicking on the “Reset” button.

After this, you need to check the connection, and if you cannot catch the network again, probably the annoying nuisance due to which you cannot connect to the Internet lies in a problem with the router.

Fixing router problems

If none of the methods for solving the problem corrected the situation, then the problem lies in one of the following points:

1. The settings of this component are incorrect.
2. Wi-Fi module failure.

To change the router settings, you need to have some knowledge. If you are not a specialist, it is better not to touch the settings, but call a specialist. For those who know a little about this issue, you can follow a number of steps yourself (can be done on all iPhone models - when the iPhone 4S does not connect to the network, the iPhone 4 or 5, after using all other methods, does not see the network or does not want to connect to it and so on.):

1. Reboot the router.
2. Reset all its settings...
3. Change encryption data: from WPA2/WPA protocol to WEP protocol.
4. Change the user's region to America.

Usually, after completing all the above steps, it was possible to successfully solve the problem of iPhones of any model connecting to Wi-Fi. A gadget connected to the network could once again delight its owner with surfing the World Wide Web.

If the Wi-Fi module is broken

A module failure will be indicated by a gray Wi-Fi icon. Therefore, if you have problems with the connection, you should first pay attention to it. If the problem is in the module, the user is unlikely to be able to solve the problem on his own. It would be more correct to say that this is not worth doing, but that it is better to immediately contact the service center. Most likely, the module will be replaced with a new one. Solving this problem is the most costly in terms of time and finances, but the gadget owner simply has no other choice in the current situation.

We all know that Apple devices always work very cool and stable. Yes, you can't argue with that. There are indeed cases when some problems arise on the iPhone or iPad. Today we will look at a very popular problem when the iPhone or iPad stops seeing the Wi-Fi network from your router. Yes, there is a problem, and now we will try to solve it.

Have you connected your phone or tablet to Wi-Fi networks, we used it, everything worked, and then at some point you see that, for example, the iPad is disconnected from Wi-Fi. Go to settings, but your wireless network is not there. It turns out that the iPad stopped seeing Wi-Fi. The exact same situation can happen with an iPhone; it can also stop seeing your Wi-Fi network. The most interesting thing is that other devices: phones, tablets, laptops, etc. continue to connect to the wireless network and work perfectly. And what’s also interesting is that the same iPhone sees other Wi-Fi networks (if they exist), but yours home network does not see. Or it doesn’t see any wireless networks at all. Many people immediately take their devices for repair, etc. There is no need to rush, now we will try to figure everything out.

It doesn’t matter what version of iPhone you have: 4, 5, 6, 7, 8, or even iPhone X. The same with a tablet, problems are observed on both the regular iPad and the iPad mini. WITH iOS versions the same story. They write that the problem appears on those devices that were brought from America. By the way, I read that on iOS 8 devices often do not see Wi-Fi, or simply lose the connection. And one more important point, we will look at the problem when the Wi-Fi network is not displayed in the list of available networks on your tablet or phone. There are simply many cases when the same iPhone does not connect to the wireless network. I wrote about the solution to this problem in the article:.

iPhone or iPad does not see the Wi-Fi network from the home router: possible solutions

1 Remove the case from your device. There are cases, after putting them on, the iPhone or iPad stops seeing all Wi-Fi networks. Everything was working just now, and now there’s this problem. And few people even realize that it’s all because of the cover. 2 Reboot your devices. Friends, you don’t need to do anything right away complex settings, take the device for repair, etc. You first need to simply turn off and turn on Wi-Fi on your Apple mobile device. If this does not help, then restart your mobile device. And definitely. Perhaps there was simply some kind of malfunction in the router or mobile device, and therefore there were problems with Wi-Fi. Very often, a simple reboot helps. You can even reboot the router several times.

You might still find it useful.

3 Change the channel and region in the router settings. This is the most important thing and as practice shows effective method solving the problem with the lack of Wi-Fi network on Apple devices. You need to try changing the channel of your Wi-Fi network. This problem very often appears where there are many wireless networks. You can also try changing the region to United States, which is set in the router settings.

I wrote about what a channel is and about changing the channel on different routers: Tp-Link, Asus, D-Link, Tenda and Zyxel in the article: Everything is written there in great detail and shown in the screenshots. I think that there should be no problems with changing the channel. As for changing the region, as a rule, it changes on the same page as the channel in the settings of your router.

Here, for example, changing the channel and region on Tp-Link:

You can try setting the region to United States. And channel, 1st, or 6th. If there is no result, then you can try different options. Don't forget to save your settings and reboot your router.

I think that after these steps, the iPhone or iPad will see your Wi-Fi and connect to it without any problems.

4 Resetting network settings on iOS. To be honest, I didn’t know about this method. I found information on the Internet that you can solve the problem with connecting to a wireless network on iOS 8 by resetting the network settings. In your device settings, go to Settings - Basic - Reset - Reset network settings.

Confirm the reset and wait for the device to reboot.

In the event that the device does not see at all not a single network (and other devices see), and you have already tried everything, then in most cases it is due to some hardware problem. Therefore, you need to contact the service center.

If nothing helps, then describe your problem in the comments, and we’ll figure it out together. Also read the comments, there are a lot there useful information about this theme.