Can't update iOS 10.2. What to do if iPhone cannot download the new version of iOS. Main causes of failure

18.06.2019

Ever since Apple released iOS 12, many people can't wait to see the new operating system. However, problems were identified. It is found that some users received the error after updating iOS 12. Don't worry, in this article we will share several ways to solve this update problem.

How to fix problem when updating iOS 12

Method 1: Force Reset iPhone

The iOS 12 update for Apple devices may have been fixed. However, the device may freeze during the update. Forced reset allows the user to resolve any problems that arise at an early stage.

Force reset for iPhone XS/XS Max/XR/X/8

1. Press and release the Volume Up (+) button.
2. Press and release the Volume Down (-) button.
3. Press and hold side button until the Apple logo appears. Don't release the Side button, even if the screen goes black, until the white Apple logo appears on the screen.

Force reset for iPhone 7/7+

1. Press and hold the Sleep/Wake and Volume down buttons at the same time for a while.
2. Hold the buttons until the Apple logo appears on the screen.
3. After the logo appears, release the buttons and the phone will restart.

Force reset for iPhone 6 and earlier devices

An error when updating iOS 11 may result in the system not being installed or installed incorrectly, so that using the device will be uncomfortable. Errors when downloading an update over the air or installing via iTunes can be corrected yourself, without contacting a service center.

Supported devices

If you did not receive the iOS 11 update when you connected your device to the Internet via Wi-Fi, and an error occurred when trying to install the update in iTunes, make sure that the model supports new version systems.

Please note: you can install iOS 11 on the iPhone 5S, but the iPhone 5 and 5C are not on the list. So it will not be possible to install the update on them in any case; you will have to be content with the capabilities of the previous version.

Failed to check for update

Errors may occur at different stages of the update. For example, at the very beginning, even before the update is downloaded, the following message appears:

If your device supports iOS 11 but can't find the update, follow these steps:

Do a hard reboot. Press and hold the Home and Power buttons (Power and Volume Down on iPhone 7 and above) until the screen turns off.
Check your internet connection. Try connecting to another Wi-Fi networks.
Delete the developer profile if you added it to test the beta version (Settings - General - Profiles - iOS Beta Software Profile - Delete).
Try updating via iTunes.

Immediately after the release of the update, failures may occur on the side of Apple servers, which cannot cope with the influx of users. In this case, all you have to do is wait for your turn to download. If your device detects an update and starts downloading it, but the download is interrupted by an error, wait a little and try downloading the update again.

Pay attention to:

The amount of free memory space.
Internet connection stability.

If the update does not download over the air, install it via iTunes.

Problems downloading the update to iTunes

Updating via iTunes may also not be ideal. One of the common problems is error 9006, which appears when updating or restoring the firmware. A failure indicates an inability to establish a connection with Apple servers.

Error 9006 when updating iOS 11 can be resolved in the following ways:

Check your network connection. Make sure your connection is stable.
Quit iTunes and restart the program.
Install latest version iTunes. Update the application through the Help menu or completely remove it from your computer along with all components and install the new version downloaded from the Apple website.
Restart your computer.
Try connecting the device to another USB port. Use the connectors that are on the rear panel system unit. Avoid adapters.
Disable antivirus software and firewall for a while.

Typically, to resolve error 9006, it is enough to disable the firewall, which prohibits establishing a connection with Apple servers. The good thing about the iTunes option is that even if Apple's servers don't respond, you can download the firmware from a third-party trusted source (for example, the 4PDA site) and install it without any problems.

Hold down the Shift key and click "Restore".
Specify the path to the firmware through Explorer.

iTunes will install itself new system, and you will save time downloading the update.

Difficulties with installation

If you downloaded the update to your device over the air, but problems arise during the installation stage - it crashes, or the installation is too slow - try the following methods:

Hard reboot your device.
Check the battery charge level. Connect the charger.
Make sure your Wi-Fi connection is stable.

If you cannot install the update on your phone or tablet, update via iTunes. As a last resort, you can transfer the device to DFU mode, and then perform a restore. With this approach, the likelihood of errors occurring is minimal.

If after an update your iPhone stops working or the screen is frozen,

In this article we will talk about the reasons why the iPhone is not updated over the air or via iTunes to new versions of iOS, and we will also tell you what to do in such situations.

No update software Not a single device can be used, except for gadgets that, due to age, are no longer supported by the manufacturer.

Therefore, if the iPhone does not want to be updated, then this is a reason to think about its condition. Problems can occur both when using iTunes and when updating wirelessly via Wi-Fi over the air. In any case, the methods for correcting the error will be the same.

Version support check

First of all, make sure that the version of the operating system you want to install supports your phone. For example, iOS 10 will not work on the iPhone 4 and previous models like the iPhone 3G. The same applies to the first generation iPad.

If you have an iPhone 4, then you don’t have to try to install the latest version of iOS, it simply won’t install. If the device is relatively new (the model appeared after the iPhone 4), then you will have to look for the cause of the problem elsewhere.

Deleting a profile

In some cases, the update is prevented by the configuration profile created in the settings. After removing it, the new version of iOS is installed without problems:

Open the Settings app.
Go to the "Basic" section.
Find the "Profile" item.

Inside the “Profile” item at the bottom there is a “Delete” button. Click on it to erase data from the settings, then restart the device and try updating again via Wi-Fi or iTunes.

If your smartphone supports the new version of iOS, there is no profile in the settings, or you have already deleted it, but the update still does not start or ends with an error, then try the following recommendations:

Avoid updating via Wi-Fi and connect your phone to your computer to install the new version via iTunes.
Make sure you are using the latest iTunes version. Download the program from the official Apple website.
Check the battery level, it should be more than 50%. If your phone needs to be charged, charge it from a wall outlet when updating.
Make sure your internet connection is stable. The operating system is quite heavy, so downloading the update requires good speed Internet.
Try replacing the cable, using a different USB port, or connecting the device to another computer.

Sometimes an update fails due to high load on Apple servers. Wait a bit and try to update again. If you already have a downloaded file with the new version of iOS on your computer, install it manually:

If no manipulations with the device help resolve the update error, contact the service center.

When at an Apple presentation they talk about new functions and cool features that developers have added to version 10 of the system, you want to quickly test interesting features. But what to do when some errors occur and why is ios 10 not updating? on a smartphone or tablet?

Why iOS is not updated - the main reasons

In fact, there are many reasons associated with the failure. In 99% of cases, you can do without a trip to the service center, unless, of course, the malfunction of the device is not caused by any mechanical damage. In such cases, you should understand that if you “drowned” the phone, but it seems to be working, this does not mean that everything in it is functioning normally. In any case, before going to the service, we recommend that you read and follow the recommendations below.

Model compatibility

In 2016, Apple stopped supporting some of the old guys. Unfortunately, not all device users will be able to enjoy all the innovations of the OS. First of all, we recommend checking your device’s compatibility with iOS 10. Which models support iOS 10? The list is presented here:

If your model is on the list, then we look for the problem further.

Check internet

The error may be that users are trying to download files using 3G cellular data. You can only update over the air using WiFi.

Resetting network settings

Some owners of Apple devices have found a solution to this problem. All you need to do is reset your internet settings. Let's go here:

Settings - General - Reset - Reset network settings

Version conflict

If you previously installed beta version 10 of the system for review, then it is quite possible that it conflicts with the official release.

First you need to delete your beta profile in Settings.

Settings – Profiles – iOS Beta Software Profile – Delete Profile

After rebooting the device, it will be possible to install a new tenth system in Software Update.

If it gives an error

Sometimes an error may appear "Software update failed". This usually happens in the first hours of an official release, when Apple's servers are overloaded. Due to the large number of people who want to test the new system, some glitches occur. In this case, you just need to wait a little. But sometimes the wait reaches several days.

Conflict with jailbreak

Another reason: why is ios 10 not updating?, may become jailbreak and installed application Cydia on the phone. Since when installing a jailbreak, updates are specially blocked for correct operation and availability of all functions.

The system can be restored via iTunes. To install the jailbreak later, make sure that it does not conflict with new versions.

Software update check stuck

Why is the software update stuck? Why is iOS not updating? on a smartphone? When endless loading appears on the screen, you need to check your Internet connection. The problem may also be on Apple's servers, which simply do not have time to process requests from millions of users.

If there are no problems with the Internet and servers, then you can force a reboot: simultaneously hold down Home and Power for a few seconds.

Updating via computer

If all else fails, then the computer can come to the rescue. You can also update from using iTunes. The program itself may automatically offer to download and install a new version on your phone or iPad. If this does not happen, then in the “Review” tab you need to click the “Update” button.

Solution for experienced

If none of this helps, and the answer to the question is: why is ios not updating? is still not given, then you can go to extreme measures. The update itself can be downloaded manually using the downloaded IPSW file. This action does not depend in any way on Apple servers, which increases the chances of a successful system update.

Only experienced users who have been working with Apple for a long time should perform all the steps.

First, you need to download the current version of the IPSW file from the Internet, which corresponds to the user model.
Connect your device to iTunes using a cable.
Next, you need to go to the updates section in iTunes.
Hold down the Shift key (Windows) or Option/Alt (Mac) and click the Refresh button. In the end we will have an updated system. If we select the “Restore” function, we will end up with a clean new system.
Choose IPSW file, which was downloaded earlier.
After all the steps taken, iTunes begins to update the smartphone or tablet itself.

After all the operations done, the famous Apple greeting will appear, and the latest update will be installed on your phone!

“An error occurred during installation” is a message accompanying one of the most frequently encountered problems when updating iOS over the air. After the release, users began to experience this problem much more often than usual, but, fortunately, it is quite easy to deal with. How to bypass the error when installing iOS is described in this instruction.

There is no big secret in how to update iOS if it is impossible to perform the update wirelessly. However, many iPhone, iPad, and iPod touch users are unaware of it because they have never had to resort to using iTunes before. As some have already guessed, updating your mobile device using a computer helps to cope with the error.

Step 1: Launch iTunes. Important! Must be installed on your computer current version iTunes. You can update the program on Windows in the menu " Reference» → « Updates", on Mac - on the " tab Updates" V Mac App Store. In the event that computer iTunes not installed, you can download the latest version from official website Apple.

Step 2: Connect your iPhone, iPad or iPod touch to your computer using a USB cable.

Step 3: Select your device in the iTunes window.

Step 4: iTunes will automatically detect that your device needs an update. The program will open a pop-up window in which you need to select “Download and Update”.

Note: if iTunes has not determined that there is an update available for your device, you can initiate its installation by clicking the " Update" In chapter " Review».

Step 5: Wait for your device to download and update. Important! Never disconnect your iPhone, iPad, or iPod touch from your computer while updating.

Ready! In this simple way you can bypass the error with the inability to update your iPhone, iPad or iPod touch wireless way. Note that, most likely, the next versions of iOS will be installed on the device over the air without any problems. However, to avoid various errors, it is recommended to install each new version of iOS using iTunes.

For mobile devices – iOS. You can usually install them without problems, and immediately enjoy the new performance and additional features. But not everything always goes smoothly - during this process there are errors and failures, and even several attempts in a row do not always give results. You can fight this, though different ways, which we will consider here.

Troubleshooting problems installing iOS 12.

In general, this version of the system is aimed at increasing stability and reliability. There are no special functional improvements or fancy goodies in it; its main task is to eliminate errors that have accumulated in previous versions. But it's just a program, and it inevitably has its own weaknesses, so you may encounter an error when installing iOS 12. But sometimes the problem can also be due to incompatibility with the device. For example, if you try to install this system on an iPhone 5, nothing will work. Because she can only work for iPhone versions 5S and above, and not on everyone iPad models. Therefore, first of all, you need to check compatibility with your device. It happens that everything is fine with compatibility, but the update fails. The most common problems are:

Requirement to update iTunes when installing from a computer.
Error 3194.
An error occurred when checking for an update - the gadget cannot detect it.
There was a problem with the installation process itself.

They are all solved in different ways, so let’s look at them in more detail. But keep in mind that these are just the most common situations; there are others, more exotic.

iOS 12 update error - "You must have the latest version of iTunes installed"

It is not uncommon for the iOS 12 update to fail to install when using the iTunes app. Even if you have updated it to the latest version, you may still get an error message and nothing will work. You can combat this by completely reinstalling the program. First you need to go to Control Panel - Programs and Features and remove iTunes from your computer. After this you need to restart your computer. Then you need to download the latest version from the official website and install it again. After that iOS update usually goes without problems.

Sometimes iTunes displays a window with code 3194, and the iOS 12 update fails. This can happen for a number of reasons:

An antivirus or FireWall may block the utility from accessing the network or Apple servers. Sometimes other running network programs may interfere. Try turning them all off, closing everything unnecessary, leaving only iTunes running.
iTunes may not have enough permissions to edit files. Run it as administrator.
IN Windows folder There is hosts file, which contains servers to which access is prohibited. You need to look at it - it opens in Notepad and should be empty. You can find it in the Windows\System32\driver\etc folder.
Check the version of iOS you are trying to install - it should be the latest.

Sometimes the installation of an update fails due to hardware reasons - if you are trying to install it on an iPhone less than version 6, or at least 5S. It won’t even fit on a regular 5 model. But special attention should be paid to access to Apple servers and the firmware file - you can download it again from the official website.

If you try to install the firmware directly from the device using the Internet, you may receive the message “Checking for updates failed.” This is especially true for the iPhone 5S and other “old” models. This means that the device cannot be found on the server the desired file, or maybe it can’t connect to the server itself. Note that this is an unreliable method that can be used only as a last resort, when there is no alternative. After all, at any moment the connection can be interrupted for any reason, and then you have to start all over again. You can deal with the error in the following ways:

Reboot the device. This simplest method can actually “cure” a huge number of software errors.
Check the availability of the Internet or Wi-Fi network. If they are unstable or have an unstable signal, try a different network.
If you install regular version iOS 12, then there should not be any profiles on the device. For the beta version, on the contrary, a profile is required. Check this match in the settings.
If all of the above does not help, refuse the over-the-air update and do it using iTunes.

Take into account the excitement that arises when a new version of the system is released. During the first hours, Apple servers are overloaded, the connection to them may be unstable, and sometimes it is not possible to connect to them. Don't try to be the first, wait a little, the first wave of fans will subside and everything will work quickly and well.

This situation with an error message usually also happens when updating via the Internet. How to fix this glitch and still update to iOS 12? It is much more reliable to connect your gadget to your computer and use iTunes. When this is not possible, you can try:

Reboot the device.
Check availability free memory. If there is very little of it, delete a few games or something else unimportant.
See how the Internet works, use Wi-Fi.
In the settings, delete the downloaded update file and download it again.

If all else fails, you still have to use iTunes.

Unable to verify update - iOS 12 failed verification

This kind of mistake is not uncommon. It appears after installation new firmware, and reports that there is no Internet connection and the test failed. This error when updating iOS 12 can occur for various reasons:

The Internet really doesn't work.
The installed version is outdated and its signature does not work.

The first step is to reboot, and if the problem persists, check the Internet from the browser. If it works, then the problem may be with the provider - some put Apple servers on the list of prohibited ones and it is impossible to connect to them. Try connecting to a Wi-Fi network with a different provider. If everything is fine with the Internet, but the error has not disappeared, it means that your firmware version is already outdated, and Apple has already released a more recent version. This happens if you download the firmware and try to install it after some time - updated iOS system does not pass the test and the iPhone displays a message about the lack of Internet. Then there is only one way out - download the latest version and install it.

Why Apple shows a message about the lack of Internet in such different situations remains a mystery. Even if the firmware signature verification fails, this error appears in the window, only confusing users. Of course, there are other situations, with other types of failures; we have considered the most common ones. Share your cases in the comments and how you solved the problem - this experience will certainly be useful to someone.

Supported devices

Failed to check for update

Errors may occur at different stages of the update. For example, at the very beginning, even before the update is downloaded, the following message appears:

If your device supports iOS 11 but can't find the update, follow these steps:

Do a hard reboot. Press and hold the Home and Power buttons (Power and Volume Down on iPhone 7 and above) until the screen turns off.
Check your internet connection. Try connecting to a different Wi-Fi network.
Delete the developer profile if you added it to test the beta version (Settings - General - Profiles - iOS Beta Software Profile - Delete).
Try updating via iTunes.

Pay attention to:

The amount of free memory space.
Internet connection stability.

If the update does not download over the air, install it via iTunes.

Problems downloading the update to iTunes

Error 9006 when updating iOS 11 can be resolved in the following ways:

Check your network connection. Make sure your connection is stable.
Quit iTunes and restart the program.
Install the latest version of iTunes. Update the application through the Help menu or completely remove it from your computer along with all components and install the new version downloaded from the Apple website.
Restart your computer.
Try connecting the device to a different USB port. Use the connectors that are located on the rear panel of the system unit. Avoid adapters.
Disable antivirus software and firewall for a while.

Hold down the Shift key and click "Restore".
Specify the path to the firmware through Explorer.

iTunes will install the new system on its own, and you will save time downloading the update.

Difficulties with installation

If you downloaded the update to your device over the air, but problems arise during the installation stage - it crashes, or the installation is too slow - try the following methods:

Hard reboot your device.
Check the battery charge level. Connect the charger.
Make sure your Wi-Fi connection is stable.

If you cannot install the update on your phone or tablet, update via iTunes. As a last resort, you can put the device into DFU mode and then perform a recovery. With this approach, the likelihood of errors occurring is minimal.

If after an update your iPhone stops working or the screen is frozen,

Hi all! I have several articles on my blog dedicated to the problems of updating firmware on an iPhone or iPad. However, as practice shows, even this number of instructions is not enough - new questions constantly appear in the comments regarding this simple procedure, in general. However, I’m not complaining - as they say, I’m always happy to help :)

On the other hand, if something is asked very often (and the error referred to in the title is not a rare occurrence), then it is better to write a separate note - this will definitely be more convenient for everyone. You receive complete instructions with pictures. I am pleased that I have helped many people. Happiness, joy, pink elephants:) Let's go!

So here you go full text errors:

Unable to check for update. The iOS update failed verification because the device is no longer connected to the internet.

At the same time, the iOS version can be absolutely any - be it iOS 7, or iOS 10 or 11. Apple is true to itself and has not changed this text for many years - most likely in iOS 12 and all subsequent firmware everything will remain without any changes.

And, it would seem, what is there to discuss? It’s been said that there is no Internet, so this is exactly what you need to pay attention to! However, not all so simple...

There may be two (!) reasons for the appearance of the message “iOS update failed verification because the device is no longer connected to the Internet”:

No network access.
This version of iOS is no longer “signed” by Apple.

And right away important point! You shouldn’t ignore the first option - they say, I definitely have the Internet and this is clearly not my case! Believe me, it could be yours too :) It’s better to play it safe and:

Try connecting to another Internet source (some providers have such “glitches” when for some reason they add Apple server addresses to the list of prohibited ones).
- what if there are now large-scale failures and the problem affects everyone without exception?

Have you done everything, checked it, but nothing has changed? Then we immediately move on to the second reason for the error “Unable to check for update” - it is that this version iOS is no longer “signed” by Apple.

It turns out that the company “does not give the go-ahead” for the update. Why? Because this update is not the latest current version. This is Apple's policy - do you want to upgrade your iPhone or iPad? Install only the latest version of iOS!

To make it a little clearer, here is a specific example:

Your device downloaded the firmware, but you did not install it.
Some time passed and more came out latest version iOS.
You are about to update, but the “old” firmware is loaded in your memory!
When you try to install it, it is checked on Apple servers and is prohibited from this action (after all, more recent software already exists!).
The error “The update failed the test” appears.

True, for some reason Apple adds a very strange inscription to all this - “since the device is not connected to the Internet.” Which, in fact, confuses all users. But oh well, let’s leave this fact on her conscience, and we’ll find out for ourselves - what to do now with all this disgrace?

And the solution, in fact, will be very simple:

After this, you can reboot the device, connect to Wi-Fi and wait for the new (already the most current) version of iOS to download. Loaded? Don't delay updating - do it right away :)

When Apple company releases an operating system update for iOS devices, we can see and download it through the Settings - General - Software Update application. As a rule, a red icon with the number “1” appears next to the Settings application icon, signaling an update.

iPhone doesn't see updates

On some mobile devices For some reason the red badge does not appear next to the icon. Moreover, if you go to the “Software Update” section, the iPhone freezes, thinks for a long time and starts looking for an update. And for some reason it doesn’t find it, although other users may immediately see the update. Why doesn't my iPhone see updates? What could be the reason?

What to do if your iPhone is stuck checking for an update

If your iPhone is stuck checking for an update, most likely the device has caught some kind of system glitch and therefore does not see the update. First, you can try the easiest way to solve this problem - reboot your phone. When the device restarts, open the Settings app again - General - Software Update. If the iPhone has found the update, you can start downloading it and installing it via OTA. If the iPhone is stuck checking for an update again, then you need to use a third-party tool – the Tenorshare ReiBoot program.

So, you need to follow these steps:

As you can see, Tenorshare ReiBoot can solve the “iPhone stuck checking for update” problem in just a couple of clicks. And that's not all she's capable of. Using the Tenorshare ReiBoot utility, you can solve most of the problems: for example, if your iPhone or iPad freezes,

One of the popular operating systems has been updated. But for many reasons, some owners of Apple smartphones and tablets have noted that the iOS 8 update fails when downloading. On this moment The most common reason for an update to fail is due to incompatibility. The new iOS differs significantly from earlier versions.

There are currently only 6 supported devices iPhone models and the same number of iPads. Even owners of fairly good iPhone 4 can no longer get the update when downloading. The only way out of this situation is to purchase a new smartphone model. Moreover, preferably the most powerful one at the moment, because iOS is really very demanding on the characteristics of the gadget. And without some reserve power, you simply will not be able to fully use all the capabilities of the eighth version.

Need for more memory

If you have iOS 7 installed, you will need to download several gigabytes of information to update it. And this is at a minimum, and even from 1 gigabyte and above. To unpack it you will need at least 7 gigabytes of free space. The reason for this heaviness is quite simple. In addition to iOS itself, it is necessary to update many other applications that refuse to work in the new OS version without it.

If you don't have enough memory while downloading, you won't be able to install the update. At least without connecting to a computer. Owners of devices with 8 gigabytes of memory may not even try to install updates on the fly. This will not lead to anything good; the update will fail. In some cases, such an attempt may even result in the loss of your personal data, photos or documents stored in the smartphone’s memory.

If your device has a memory capacity of 16 gigabytes or more, then everything is much simpler. You just need to throw out everything unnecessary from the gadget to free up much-needed gigabytes of memory.

Now you know why you can’t update your device. It remains to decide whether to continue trying to install the update or not.

Preparing for the update process

Installing new iOS requires some preparation. Initially, you need to remove everything unnecessary on your gadget, namely, clear the memory of your gadget from unnecessary files, documents and applications. It takes a little time, but it brings significant benefits to yourself.

After cleaning is completed, you can proceed to the second stage of preparation - updating the remaining applications. But not all applications can work normally after downloading the new iOS. This is the problem that the latest update should fix. This update will also add many useful innovations, for example, compatibility with some iOS 8 features.

Now you need to save all important files and documents on backup media. The best thing, of course, is to move them to your computer's memory. This is done for a reason, but for their own safety. Because recently there have been many cases when backup iTunes copies or iCloud were unable to recover lost data. At the slightest failure, the gadget freezes in a “time loop” (cannot be turned off Recovery Mode). One of the main reasons for falling into this loop is considered to be a lack of internal memory devices. A similar effect can be observed when trying to install any application when there is no free space. But in the case of updating iOS, everything is much more serious and unpleasant.

To get out of the “time loop” you will have to start the recovery process in iTunes. And this leads to the complete loss of all your data. If you don't do it in advance backup copy, then you will end up with a clean gadget. Therefore, before any important update, always make at least one backup copy of your personal data. And it would be a good idea to transfer all the photos and other unique files to your computer, because it will be almost impossible to restore them.

After completing all the necessary steps, the process of preparing for the iOS update can be considered complete. Now you can proceed to download iOS 8.

Possible ways to install the update

There are two main ways to update the iOS of your gadget. The first is updating via Wi-Fi. The main danger of this method is getting into a “time loop”. It must be remembered that lack of memory is only one of many reasons for this failure. Therefore, it is best to exercise reasonable caution and perform the update using a computer. This is the second and more reliable way to install new iOS. At the same time, it doesn’t matter which operating system is on your PC. The iTunes application, through which the update occurs, works under any operating system.

Update using your computer

When installing an update using a computer, you are guaranteed to protect yourself from a “time loop”, loss of personal data and other unpleasant surprises. At the same time, you can completely ignore the battery charge level. After all, even if the gadget is not connected to the Internet, all data will be downloaded to the computer and only after that installed in the memory of your gadget.

Before starting the update process, you need to worry about checking the version of your iTunes. It should be the latest one. To make sure iTunes is up to date, you need to open the “Help” section and select “Updates”. If everything is in order, then you can begin the actual update process.

To do this, you need to connect the gadget to your computer via a USB port. Wait for the request from the program that should recognize it on your device outdated version iOS. After this, a sign appears prompting you to install the update. In some cases, iTunes may not respond, so you will have to run the update process yourself. To do this, open the “Review” tab and click the “Update” button.

Now all you have to do is wait for iTunes to download and install all the required files.

Installation via Wi-Fi

Installation via wireless network will not require any special knowledge or effort from you. The main thing is to have good Internet speed. It would be a good idea to pre-charge the gadget to the maximum. Let's look at the steps required to update.

You need to connect the gadget to the Internet and check its operation by visiting one of the sites. You will need to open the gadget settings, then select “General” and “Software Update”. After that, click “Download and Install”. You will see the update downloading. Once completed, click Install. If the installation is successful, all that remains is to restore your personal data from the backup copy.

It's a quick and easy iOS update. It's just a pity that this method not as reliable and safe as we would like.

The new update is not just perfect functionality, but also some additional problems. Therefore, there is no need to rush into switching to new iOS. Well, if you do decide to update your gadget, then be prepared in advance for the upcoming difficulties and the inevitable decrease in the speed of your smartphone or tablet.

When do you plan to update? iPhone iPad to iOS 11.1/11/10 via WiFi, but the iPhone does not see the update in the settings or displays a message. "Unable to check for updates." An error occurred while checking for a software update. Go through all the steps to fix it easily.

I can't update the software on my iPad. Apple online support says to go to Settings/General/Software Update? I'm trying to update to ios 11. The problem is that the iPhone does not see the update, there is no software update to choose from. I've looked everywhere for it and can't find it. Please let me know what to do?

IPhone doesn't see iOS update, there are usually a few small things that can cause things to go wrong. Perhaps your friend installed the latest version of iOS but you don't see it as an option in Software Update, or you tried to update iOS but it doesn't want to install. Your iPhone might be broken, or you might have lost data and found that your settings have changed after performing an update.

In this article, we will look at the most common problems that people have when their iPhone does not see an iOS update.

When Apple first launches a new version of iOS, it may take some time for the update to become available. Sometimes your friend may receive the update before you. Or maybe your iPhone is not capable of running the software, in which case you won't see the warning at all.

To run iOS 11, you will need one of the following devices:

iPhone X	iPad Pro 12.9-inch (2017)	iPad 4th generation
iPhone 8 or iPhone 8 Plus	iPad Pro 12.9-inch (2015)	iPad mini 4
iPhone 7 or iPhone 7 Plus	iPad Pro 10.5-inch	iPad mini 3
iPhone 6s or iPhone 6s Plus	iPad Pro 9.7-inch	iPad mini 2
iPhone 6 or iPhone 6 Plus	iPad Air 2	iPod Touch 6th generation
iPhone SE	iPad Air
iPhone 5s	iPad 5th Generation

Plus any new Apple devices with iOS.

If you have an iPhone 5C and an iPhone 5 or anything older, you're out of luck! iOS 11 will not work on your iPhone.

Additionally, another very common iOS 11/10 update error is when you go to Settings > General > Software Update and install the newest version on top of the old one. Also, the iPhone does not see the iOS update, it does not appear at all or displays the message “Unable to check” for updates. An error occurred while checking for a software update." Especially since iOS 11.1/11 was released, many users encountered this situation and asked why iOS 11.1/11 is not showing up in Settings?

This problem can occur due to various factors. But don't worry. You can try the following tips to help your iPhone 8/X/7/6s/6/5s see the update.

Make sure Apple servers are working properly

Sometimes Apple servers have problems, and at this time you decide to update your iPhone or iPad to iOS 11.1 / 11. Your iPhone will not see the iOS update, or you will not be able to check the problem with the update. So, the first thing you need to do about this problem is to visit the web page.

If Apple's system status is yellow, then there is something wrong with that server at the moment. And all you can do is wait or contact service Apple support. If all servers are green, it means they are all working normally. Then you need to go to next step below.

Most often, the iPhone does not see the update due to a profile conflict.

You may have a profile conflict on your Device. Because of this, your iPhone does not see the iOS update. In such a situation, if you delete the profile, the problem will not be solved; to receive further updates, follow these steps:

Step 1: Reset all settings

Go to Settings -> Basic -> Reset all settings .

After this, you will be asked for a Master Password, enter it and wait until your iOS reboots.

Step 2: Reinstall the profile

Now you need to re-install the profile, no matter what public or developer you have.

Go in Settings -> Basic -> Updates.

Check if a new version of iOS is available. If all else fails, perform an iOS restore.

Tip 1: Make sure your iPhone is connected to Wi-Fi

Over-the-air updates require iPhone and iPad to be connected to Wi-Fi and battery capacity of 50% or more. (We sincerely recommend putting it on charge). If Wi-Fi is connected, you can also turn it off and turn it back on after a few minutes.

If your iPhone still doesn’t see the iOS update in the settings or you can’t check for updates. Try to force restart your device: press and hold the on/off button.

Continue holding the On/Off button, then press and hold the Home button > Hold them until the screen turns on and shows the Apple logo. Then go to Settings > General > Check Software, your iPhone should see the iOS update.

Sometimes this happens due to the network. You can reset it on your device to do this: Go to Settings > General > Scroll down to Reset > Tap Reset Network Settings.

If you downloaded the iOS 11.1/11 beta on your iPhone or iPad, it won't appear in settings due to this. You must first uninstall the beta version and then proceed to update. How to remove beta version? Settings > General > Scroll down to Profiles and Device Management > Click on the beta version and delete that profile.

Tip 5: Update iOS 11.1/11/10 using iTunes or iCloud

If all the above methods do not work, then the last option we can think of is to abandon the OTA and turn to iTunes for help. We have also prepared practical guide for assistance in updating iOS 11.1 / 11/10 in all ways: ?

Let's summarize

Using these methods, you can fix the problem iPhone does not see iOS 11.1 / 11 / 10 update in settings. We really welcome any other method, if you have one or more please share it in the comments below. To help more people suffering from this in iOS 11.1/11 does not appear on iPhone or iPad.

Wednesday after iPhone presentations 7 and iPhone 7 Plus, Apple released the iOS 10 Golden Master (GM) update to developers, followed by a public beta release the next day. The final version of iOS 10 was released on September 13.

Everyone was really looking forward to the release of the new firmware, but as often happens with the release of new software, errors appear that prevent installation. For example, today many users encountered the “Software Update Failure” error that appeared when installing iOS 10 over the air (OTA).

This is one of the most common problems that users face when updating to a new version of iOS. This error encountered when updating iOS 8 and iOS 9.

The error contains:

Software Update Failure

There was an error loading "iOS 10".

If you are facing this problem, then luckily we have several solutions for this problem.

Solution 1: Try again

When an error pop-up appears, you will be given two options - “Close” and “Settings”. Click the Close button to close the error message, wait a couple of minutes, and then proceed to install iOS 10 again.

Solution 2: Wait a few hours

With the release of the final version of iOS, millions of users are trying to download and install iOS 10. A huge amount of traffic is sent to Apple servers, which means that there will definitely be some delays. Therefore, it is better to wait for a few hours or days until the load on their servers decreases.

Solution 3: Update to iOS 10 using iTunes

If none of the above methods help, then try connecting your device to your computer and launching iTunes. Then, on the Review tab, click Update.

Solution 4: Install iOS 10 using IPSW file

As a last resort, you can manually download the iOS 10 IPSW file and use it to update your device. This usually solves the problem since you are not dependent on Apple servers.

This method is recommended for advanced users as it requires you to update to iOS 10 manually. If you are a regular user, it is better to wait a few hours and try the update again. If you can't wait to get iOS 10 right now, then follow the instructions below to download and install iOS 10 using IPSW files:

Download the iOS 10 IPSW file for your device. Make sure you have downloaded correct file IPSW that matches your device model.

iOS 10 for iPhone

iPhone SE – iPhoneSE_10.0.1_14A403_Restore.ipsw
iPhone 6s, iPhone 6 – iPhone_4.7_10.0.1_14A403_Restore.ipsw
iPhone 6s Plus, iPhone 6 Plus – iPhone_5.5_10.0.1_14A403_Restore.ipsw
iPhone 5s – iPhone_4.0_64bit_10.0.1_14A403_Restore.ipsw
iPhone 5, iPhone 5c – iPhone_4.0_32bit_10.0.1_14A403_Restore.ipsw

iOS 10 for iPad

9.7‑inch iPad Pro – iPadPro_9.7_10.0.1_14A403_Restore.ipsw
12.9‑inch iPad Pro – iPadPro_12.9_10.0.1_14A403_Restore.ipsw
iPad mini 4, iPad Air 2, iPad mini 3 –iPad_64bit_TouchID_10.0.1_14A403_Restore.ipsw
iPad Air, iPad mini 2 – iPad_64bit_10.0.1_14A403_Restore.ipsw
iPad (4th generation Model) – iPad_32bit_10.0.1_14A403_Restore.ipsw

iOS 10 for iPod touch

iPod touch 6th generation – iPodtouch_10.0.1_14A403_Restore.ipsw

Connect your iPhone, iPad or iPod Touch to your computer.
Go to iTunes Updates.
Hold down the Option/Alt button (on Mac) or Shift (on Windows) and click the Refresh button. If you want to completely wipe your iPhone to get “bare” iOS 10 without any data, then instead of the “Update” button, click on “Restore” while holding down the Option/Alt button (on Mac) or Shift (on Windows) .
Select the desired ipsw file that you downloaded earlier.

These were all the ways to solve the “Software Update Failed” error. Did you manage to solve this problem?

Don't miss Apple news - subscribe to our Telegram channel, as well as YouTube channel.

Popular

Electronic trading platform of OJSC Severstal

« One of the key players in the steel and mining markets is PJSC Severstal. The assets of this company include the largest... »

WhatsApp messenger - messages without using SMS

« If Android, which we described earlier, is the most popular operating system, then iOS for Apple phones is an image system that is bought... »

ZTE Blade L3 - Specifications

« Equipment The smartphone from ZTE is sold in a nice branded blue and white box. Minimum equipment: power supply, cable and manual.... »