Samsung s5 mini firmware. Installing official firmware on Samsung Galaxy S5 Mini. What do we need

The Galaxy S5 Mini ships out of the box with Android 4.4.2. In the future, presumably, there will be an update to Android L, also known as 5.0. True, it will most likely appear with a delay, as was the case with the Galaxy S4 mini - Android 4.4 appeared for it much later than for the Galaxy S4.

So for Galaxy flashing S5 Mini you need to do the following:

1. download the Odin program to your PC and make sure that your smartphone has enough charge;
2. enter the smartphone into Download Mode (while simultaneously pressing the “off” + “volume down” + “home button”) keys, then press “Volume up”;
3. connect to device USB cable;
4. in the Odin application on your computer, select files from the archive with the firmware:
   • for the column PIT - a file with the extension *.pit;
   • for PDA - a file whose name contains the word CODE, if there is none, then you should know that this is the heaviest file in the archive;
   • for CSC - a file whose name contains the word CSC;
   • for Phone - a file containing MODEM in the name;
5. Note. If the files for the CSC, Phone and PIT columns are not in the archive with the firmware, then we sew exclusively using the one-file method, i.e. indicate the location of the firmware in the PDA column, and leave the remaining lines empty.
6. Make sure that the “Auto Reboot” and “F.” checkboxes are checked in Odin. Reset Time". If the location of the *.pit file was specified, then the “Re-Partition” checkbox will be checked automatically;
7. Press the “Start” button and watch how the firmware process occurs. The phone may reboot several times during installation and in no case should you disconnect the cable from it until the message “All threads completed” appears in the Odin log or the green information window with the inscription “PASS!” lights up.

The firmware update process traditionally lasts several minutes (from 5 to 15) and if successful, you will be asked to configure the smartphone according to your preferences. After this you can start working.

If suddenly something didn’t work out, you can ask about it in the comments under the article.

Instructions for installing official single-file firmware on Samsung Galaxy S5 Mini (SM-G800x).

Drivers and programs

Attention!

To install the official stock firmware on the Galaxy S5 Mini and return the phone status (Settings > About device > Properties > Device status) to “Official” after switching from custom firmware and thereby returning the ability to receive updates over the air Just follow the instructions provided.

Installation instructions

Unpack the downloaded archive into a folder with Odin PC for convenience. The file in the ".tar" or ".tar.md5" format must be left, but the "SS_DL.dll" can be deleted.

Reset your device.
To do this, go to the settings tab " Accounts " to the section " Archive and reset", select the item " Reset device" and press the button " Delete everything" The phone will reboot.

Run Odin PC as administrator.

Put your device into download mode ( Download Mode).
To do this, you need to simultaneously hold down the Volume Down key, the Home button and the Power button. Then wait until the phone reboots and agree to the warning by pressing the Volume Up key.

In this state, connect the smartphone to the computer. In Odin the message “ COM».

Click on the “ AP» and select the TAR firmware archive.

Items " Auto Reboot" And " F.Reset Time" must be activated, A " Re-Partition"if active - must be disabled.

Click on the “ Start" The firmware installation process will begin.

At the end of the operation, if everything was successful, the message “All threads completed. (succeed 1 / failed 0)". The phone must be restarted manually by holding down the power button until the screen turns off. It may take up to 5 minutes for your device to boot up initially.
ATTENTION!
If the device does not boot for a long time or the data has not been reset, it must be performed from recovery.
To do this, you need to simultaneously hold down the Volume Up key, the Home button and the Power button. After downloading, select " Wipe data/Factory reset", and then - " Reboot system now" If after these steps the device also freezes when loading, you need to reflash it again.

When the device boots up ( initial setup it is advisable to skip), perform data deletion again from step 6.

That's all. Once your phone boots up, it will be completely ready to use and its status should change to “Official”. If this does not happen and the status is still “Special,” you must repeat step 6 of this instruction.

For the current generation of people, the smartphone has become an indispensable assistant and an extremely useful device that combines hundreds of various functions. Taking a photo, counting the number of ingredients, setting reminders, checking the weather, reading the news, chatting with friends - this is not a complete list of everything that you can do. modern smartphones. Sometimes we simply forget that they do not last forever and are subject to gradual wear and tear.

Smartphones running operating system Android has long filled the whole world with its diversity. Their software code is open and ready to be edited or improved. While using such devices, there are times when the software component malfunctions and the smartphone stops working properly. To solve the problem simple reset Resetting to factory settings may not be enough - you need to flash the Samsung Galaxy S5 Mini SM-G800H.

Fortunately, manufacturers mobile technology and just enthusiasts have found dozens of ways to change the firmware for all Android devices without exception. The process will take a few minutes and the smartphone will come to life, starting its daily work with renewed vigor. AndroGoo website prepared detailed instructions on how to flash Samsung Galaxy S5 Mini SM-G800H

What do we need?

1. Device charged at least 50% (if possible).
2. Original USB cable.
3. latest version.
4. Latest firmware:

If a new OS version has been released for your smartphone or the one you need is not in the instructions, please let us know in the comments below the post.

Samsung Galaxy S5 Mini SM-G800H firmware process

• If Kies was installed on your computer, remove it.
• Download and install for Samsung smartphones and tablets.
• Download and install.
• Reboot the computer.
• Unpack Odin onto your desktop. In the same folder we extract the firmware files from the previously downloaded archive.

• On your smartphone go to “ Settings«, « For developers"(if there is no such item, go to " About the phone" and click many times on " Build number") and turn on " USB Debugging" And “Unlocking, provided. production".

• We transfer the smartphone to Download Mode. To do this, turn it off completely, hold down the buttons at the same time Home+Power+Volume down.
• After the screen appears with the message Warning, confirm the choice by pressing the button Volume up.

• The phone has entered download mode.

• Let's launch Odin on behalf of the administrator.

• In this state, connect the device to the computer using a USB cable (exclusively USB 2.0) so that flash Samsung Galaxy S5 Mini SM-G800H. If in the ODIN window the field ID:COM turned blue, like in the screenshot below, everything is fine - you can continue. If not, reinstall the drivers and restart the computer.

Files that can be found in the archive with the firmware

The picture shows the names of files that may be in the archive with the firmware and indicates where to insert them in the Odin window.

If there is only one file and takes up a lot of space, insert it into the field PDA. This is the firmware.

• In the appropriate fields on the right, select the firmware files, based on the example above. IMPORTANT! Only checkboxes should be checked Auto Reboot And F. Reset Time.

• This is what the program window looks like ready for firmware:

• Click on START and wait for the firmware process to finish. At the same time, it is strictly forbidden to disconnect the smartphone from the computer and touch the USB cable. The whole procedure will take a few minutes - the exact time depends on the power of the PC.

• Once finished, the device will reboot itself. We disconnect it from the PC and start using the latest firmware.

For those who have just become a beginner or are not an expert in the vast world of Android and are not particularly familiar with the concept of how - Root Android , as well as why it is needed, what can be done after obtaining Root rights, or how to subsequently get rid of them if they are no longer needed, all this can be found in the detailed article -!

First of all!

There are no "left" links in this article or necessary actions! If you really need Root Rights, then read carefully and follow step by step, this is a guarantee that you will do everything right! This article on getting Root rights is divided into two parts: The first part is Required components and conditions, the second part is Instructions how to use the received files and programs to get root rights. If in the process of getting root Android rights constantly rebooting or in the process of eternal loading (happens extremely rarely, but still), then it’s worth . Now let's start getting Root rights!

Android manufacturers sometimes release new firmware, on which it is not possible to get Root using one of the proposed methods, if the article also contains alternative ways, try them. Doesn't work anyway? Specify Android version and the firmware version in the comments (don’t write angry, shitty comments, it won’t do you any good or any harm to others). Android is frozen (will not load), read and re-read from the very FIRST PARAGRAPH, all the necessary links are present in the article!

Still have questions?

Do you have any questions or can’t get root rights to your Android? Leave comments about what worked or didn’t work for you, or what you did differently.