The use of modern technical innovations requires us to change some details in everyday life. For example, using a smartphone in a car will be much more convenient if you attach the device in close proximity to you on a special holder. This way, you can not only easily answer the call, but also benefit from navigation programs or other similar applications. In this article we will look at the most common fastenings for cell phone, which allow you to conveniently fix it in the car.
Some phone holders have a suction cup, which significantly expands the possibilities of installing such a stand, including on uneven surfaces. Over time, the suction cups lose a little stickiness and do not stick well, but this can always be corrected by rinsing them in warm water (the liquid will wash away all dirt and accumulated fats). This type of cell phone holder is well designed, and all buttons or ports of most gadget models will be fully accessible without being covered by elements of the device. In addition, various mount options allow you to mount your phone on the windshield or even on the dashboard, but any other convenient place in the car will be inaccessible. 
The advantages of using this particular option include ease of installation and the absence of the need to make any changes to the interior elements, while the main disadvantage of this type of phone mount is sensitivity to the peculiarities of placement. For example, if the car window is located at a strong slope, then it will be possible to attach the suction cup only in its upper part. The too long bracket is also inconvenient to use, since it swings the smartphone violently when the car is moving.
Important!When choosing a suction cup holder, pay attention to the thickness of the rubber from which it is made. In the cold season, material that is too thick will quickly lose its elasticity, and the holder will simply fall off the glass.
Clip for attaching a phone with a flexible cord
This option for placing your phone in your car will cause you a lot more problems than benefits. Despite the fact that it allows you to fix the phone almost anywhere in the vehicle without the need for glue or suction cups, such holders will create quite a lot of noise when driving, blocking the air flow coming from the deflector. Considering that the clothespin is most often attached to the heater grille, which has many thin jumpers-blinds, it is better for you not to drive over holes and potholes, as strong shaking can cause the fastener to break.
Among the advantages of using the clip is the ability to rotate the phone 360 degrees (made possible thanks to the presence of a flexible cord), but this does not make it unique. Therefore, attaching the phone to a deflector or any other place using this method is not the best option solving the problem of placing a smartphone in a car.
Phone holder for steering wheel
A phone mount on the steering wheel of a vehicle is enough simple design, in which the platform for the gadget consists of two black plastic plates that fit into each other. They have a spring inside that allows you to use the holder for phones of very different widths, holding them from below and from above using silicone rollers.
You won’t have to spend a long time figuring out how to install such a phone holder in your car. Mounting on the steering wheel is done using a silicone loop, at the end of which there is a plastic pedal. By pressing it, you can remove the holder from the steering wheel.
Among the disadvantages of this type of fastener, it is worth highlighting the limited visibility of devices on dashboard(in particular, the speedometer indicators are poorly visible, which can easily lead to a fine for speeding), the appearance of a feeling of motion sickness at the initial stages of using the device, which occurs due to the rotation of the phone along with the steering wheel of the vehicle. In addition, if the power cord is connected to the phone, the cord often wraps around the steering wheel when turning. True, this does not always happen.
Bracket that is adjustable
Another option for devices for holding the phone while moving in a vehicle. The adjustable bracket is mounted on the ventilation grill and is suitable for smartphones with different body widths. The gadget is inserted between two stops, one of which extends downwards, thereby providing what you need on your phone space. The advantages of using this type of mount include the compactness of the mount itself and the ease of installing the phone, and among the disadvantages, there are all the same disadvantages as in the case of using a clip: noise, knocking and the possibility of breaking the place where the holder is installed.
There are so many phone holders for cars that you can’t immediately choose which one is best. Some of them are similar to each other, and some are radically different from their own kind. The last option is a magnetic ball made of steel and coated with a layer of treated aluminum. 3M® VHB™ bonding material is applied to the bottom of the ball base, which can provide a secure attachment to the surface of the dashboard. The bonding layer is absolutely harmless to the place where the holder is attached, so it can be removed without any problems.
The second element that is included in the design of this mount is a magnetic washer that remains on the ball base and holds the device using magnetic attraction. Thanks to it, it is possible to change the angle of inclination of the mount.
The third component is a metal plate that is glued to the phone using 3M® VHB™. It is she who is attracted to the magnetic ball and securely fixes the gadget in one position. The silicon core guarantees smooth gliding and a strong grip, thanks to which you can easily move your phone from vertical to horizontal position, while changing the angle of inclination.
If you do not know how to attach a phone holder to the dashboard, or all the previously purchased devices did not meet your requirements, we recommend that you turn your attention to completely new development in the field of similar inventions. It is based on the capabilities of a powerful neodymium magnet. You need to install a special ring on your phone (tablet), and place the magnetic holder itself (made of metal) in the car. After this, as soon as the smartphone is near the mount, the magnet previously installed on its cover will be attracted to the holder and ensure tight contact with it. The rubber core promotes maximum contact between the two surfaces, guaranteeing comfortable rotation of the device by 360%.
Most often, this car phone holder is installed on the control panel, and its main advantage is the ease of mounting and further placement of the device. As for the disadvantages, the main one is the inability to move the stand multiple times across the dashboard (the material from which the mount is made is intended for one-time use).
Flexible phone panel
If you know well what a standard smartphone holder is, then when you see a flexible panel (mat), you will immediately understand that it is somewhat different from the usual devices. It does not need to be glued or secured to the instrument panel in any other way, because the material of manufacture (silicone) already allows it to stick to the interior trim. The stand comes with two cables: a base (with a USB connector) and a magnetic cable with micro USB and Lightning connectors.
The latches for the phone are installed on the mat, and a micro USB or Lightning connector is inserted into the smartphone itself, coming from magnetic cable. After this, you need to install the cable base in place.
The USB connector connects to charger, after which the mat is ready for use. There is an LED indicator on the base that will let you know when charging is starting. The smartphone is placed between the clamps, like on a stand. It is important that all buttons and connectors of the device remain open, and nothing interferes with its full use.
The position of the latches can be easily changed: the smartphone can be installed both horizontally (for example, for navigation) and vertically (for communicating with family and friends). You can also choose the most convenient viewing angle. This holder is a universal device, which means it is suitable for any smartphone, regardless of screen size.
Standard holders for a cell phone in a car do not always justify trust, which is why a more practical option is often universal mounts that can be converted to use another gadget within a few seconds. In this case, the phone is fixed in one of three ways:
Using magnets, which is not the best option for fixing, since the smartphone may periodically fall.
Using a cone clamp (a more reliable fastening option, just check how easy it is to get the phone out).
With polyurethane legs that can be extended to suit different sizes specific device. As in the previous option, problems may arise with removing the gadget. Of course, this method of attaching a smartphone is also not without its drawbacks, but at the same time it is a good alternative to non-universal holders.
A car phone mount can have the most different shapes and design, and often turns out to be a fairly simple device. This includes a mesh pocket in which the phone fits, just like in a regular trouser pocket. Such a device is often used not only to place a smartphone, but also for temporary storage of other small items (cigarettes, keys, etc.). The mesh pocket can be easily mounted on any flat surface by gluing it to it using double-sided tape.
How to secure your phone if there is no holder
If you decide not to buy a special device for fixing your phone in the car, or you still couldn’t figure out how to choose the right holder for your phone in your car, then we suggest you consider some options for fixing your phone using improvised means.
1. We use a rubber band. All that is required of you when using this method is to insert the elastic band between the “ribs” of the interior stove grille so that the phone can be placed in the two loops formed. Of course, part of the screen will be closed, but the smartphone will be securely fastened.
2. Buy a stationery clip (binder clip). Having bought a regular paper clip, you need to remove the staples from it, bend it and wrap it with thick thread. One part (clothespin) needs to be hooked onto the air duct and secured with an elastic band, and the second will be used as a fastener for the phone. To the advantages the specified method It is worth considering the low cost of the product and ease of execution, but the disadvantage is the difficulty of subsequent removal of the phone and the possibility of rough impact on the body of the device, since the thread does not always soften the load. You also won't be able to change the angle of the phone, and any attempts to do so may damage the air duct grille.
3. Use wire for fixation. For those who are ready to sacrifice the integrity of the panel for the sake of a good mount for the phone in the car, there is a method based on creating a wire holder. To do this you will need strong stainless steel wire and a drill. Using the prepared tool, you need to drill holes of a suitable diameter in the dashboard, after which you should bend the wire and insert it into these holes. Now all that remains is to hang the phone or tablet by the case.
Important!This mount is only suitable for tablets in a book case, but in this case the device is not always securely fastened. Moreover, it can easily block access to the radio.
Nowadays, a large number of gadgets, be it a DVR, a radar detector, or just a phone mount, are attached to suction cups (usually two or three small ones) or to one, but massive one (which has a lever on the body for greater effect). However, not very high-quality suction cups can fall off the windshield! Everything seems to be secured well, but you hang up your device, and in cold, hot weather or on bumps - “BANG” and it falls off! And if a gadget costs several thousand rubles, you can break it! In general, it’s really unpleasant or even dangerous, but what to do, how to deal with it? Today there are several really working methods that will help almost “tightly” glue such a mount to the windshield, there will be a video at the end...
Suction cups are not the only mount on the windshield; there are a lot of them, ranging from simple ones to magnetic mounts. However, they are inconvenient to install, and some are also difficult to remove, say, to transfer to another car. The suction cups really win here, “stick it, unstick it” - drag it where you need it. BUT if the suction cup is of poor quality, it falls off the windshield, even if the car is standing still.
Types of suckers
As I already wrote, there are usually two or three of them in the mount to better hold the gadget.
And there are single, but massive ones. They are made mainly from two materials - rubber and silicone. Rubber suction cups are dark (often black) in color, but silicone ones are often transparent.
There is a lot of debate about which of them is better. However, in my experience, the regular rubber options held up better. Silicone hardens much more in cold weather, which makes the suction cup less elastic.
Although to be fair, it’s really difficult to choose between these two options! Because there is high-quality silicone, and there is low-quality rubber.
How does the suction cup work?
Actually, there is nothing magical here, remember the school physics course. If we describe the essence of the phenomenon in a few words, it turns out that almost zero pressure is created under the suction cup, since we pressed the surface to the windshield and pulled it towards ourselves. But we have atmospheric pressure, which always puts pressure on us and on the objects around us, and since it is quite high, it presses on the surface of the suction cup on the other side, pressing it to the surface (it seems to try to fill the internal vacuum under the suction cup).
Thus, if the suction cup is working properly, it will stick very firmly to the windshield. But why does it fall off?
Why does the suction cup fall off?
There are only a few reasons:
- Poor quality production. If it is made poorly, there are distortions or bends, then it will not hold. After all, precision manufacturing is important here.
- Insufficient pressure. Conventional options (without levers) cannot create sufficient pressure inside, they will not withstand heavy weights. That's why more of them are needed, two or three pieces
- Breakthrough. If the rubber or silicone surface breaks, then the vacuum that was created inside will immediately be filled with “atmospheric pressure”, the gadget will not hold on
- Dirty surface. Before gluing it to the windshield, it is worth wiping it, it is advisable to degrease it; if there is any deposit on the surface, it will facilitate the passage of air inside, through certain time it will fall off again
- Imperfect surfaces. Both the windshield and the suction cup itself. They have microcracks and other imperfections. It is through them that, slowly but surely, air will leak inside. Over time it will fall off again
What you need to learn is a simple truth, so that air pressure does not pass inside, and there is a vacuum inside as long as possible.
What should I do to prevent it from falling off?
There are only two tasks:
- Clear the atmosphere inside as much as possible.
- Don't let that negative pressure escape
This is why the side edges of the suction cup are made so wide! And they try to make the material as elastic as possible so that it adheres well to the glass.
Often normal fastenings fall off due to the fact that the suction cup is not sealed. And to make it as good as possible, you just need to wet the surface. Any liquid seems to clog the “microcracks” and prevent air pressure from leaking out. And yes, water is not exactly the best option.
Many people wet the surface with water (or even saliva) , this is of course correct, but in winter it can freeze, but in summer it simply evaporates. Therefore, you need a composition that will not evaporate, freeze or harden. Motor oil is ideal, you need a little on your finger, wipe the surface of the suction cup and attach it to the windshield. WILL HOLD ON for a very long time!
The second “jamb” of modern gadgets - this is a “lever” in the mount that creates a lot of pressure. Often it makes almost a full turn (180 degrees), but it starts working only at the very pressure, only 25 - 35 degrees, that is, the remaining angle works idle. We need to reduce this idle speed, which is done - a circle is cut out of a regular car camera, along the rim of the suction cup (like a gasket), then all the insides are cut out inside and it is inserted between the suction cup and the body.
Once you start pressing the suction cup with the lever, this “spacer” will reduce the idle speed and increase the pressure inside. IT WILL HOLD SEVERAL TIMES BETTER, tested many times.
Here's a short summary:
- Checking the rubber or silicone surface for damage
- Degreasing glass
- Lubricate the surface of the suction cup (motor oils are ideal because they do not freeze in winter and do not evaporate in summer)
- You can make a spacer (ideally from a wheel tire) between the plastic and rubber (silicone) components, thus increasing the pressure
Today they have become an integral part of the car, so car owners know all types of DVRs, but few have thought about how to mount the device in the car.
Often they use the fasteners that come with the device, without thinking about its durability and reliability. Unfortunately, in order to save money, the manufacturer does not always provide fasteners of the required quality, without caring about its ergonomics and ease of use. In addition to the main function of the fastener, it should allow the device to be conveniently and correctly positioned so that it does not impede the driver’s visual view of the road. It must also have a favorable location in order to film everything that happens right on the road. No less important and pleasant requirements include the fact of design, a harmonious combination of the DVR with the style of the car interior. The fastener must be light, durable and small-sized at the same time. Equally important is the possibility of quick, simple, but reliable installation and dismantling.
In this article we will try to figure out whether DVR mounts exist on this moment and which one to choose.
1. Sucker
This type of mount, like a suction cup (either on the DVR itself or on a bracket) usually comes with the device itself. The suction cup is attached to the windshield of the car and this must be done in such a way that the device does not interfere with the driver, and he has a maximum viewing angle.
Learning how to properly attach a suction cup to a car window
There is nothing particularly complicated here:
- Wipe the glass with a soft cloth or cotton wool soaked in vodka or alcohol (degrease the surface).
- We are waiting for the glass to dry.
- We bring the suction cup, press it tightly and wait for it to grab.
After this, you need to make sure that you managed to firmly attach the suction cup and the DVR, so that during the trip you don’t have to worry about whether the expensive one is installed on the glass correctly and efficiently.
Pros of the suction cup
- Elementary design.
- Easy installation.
- Compact size, which does not block the driver’s view of the road.
- The ability to easily detach the suction cup and reinstall the DVR to another location or take it with you without spending a lot of time on it.
- It comes complete with a DVR, meaning it does not require any extra material costs.
Cons of the suction cup
- When driving quickly and carelessly over gravel or bumps, the suction cup becomes unstuck and falls off, which can lead to damage to the device.
- The suction cup falls off when the temperature changes and when the car is left in the cold for a long time.
- It is impossible to carry out hidden installation, and hanging wires can spoil the aesthetics.
If you decide to mount the DVR with a suction cup, then you will have to frequently remove and attach the device and constantly monitor the strength of its attachment to the glass.
A more advanced version of the suction cup mount is a DVR with a special suction cup, which is attached immediately behind the rear view mirror inside the car. This type of suction cup is used if the device is small in size and has a special mount for installation of this type.
pros
- Does not interfere with the driver's view of the road.
- Does not require specialist intervention (implies self-installation).
- Does not attract the attention of intruders and traffic police officers.
- The suction cup can be easily moved to another car.
- Attachment strength.
- Easy to use.
Minuses
- Not suitable for all DVRs.
- More resistant to temperature changes than a suction cup on glass, but you still have to control the degree of attachment.
Anyone can install the suction cup behind the interior rear view glass correctly, so it is considered the best option for fastening from all positions. It provides a high-quality shooting angle and is relatively inexpensive, given its ergonomics and aesthetic appearance.
3. Sticker
The “sticker” type of mount is a double-sided tape that is attached to an inconspicuous area on the windshield (for example, behind the rear view mirror) that does not interfere with your view.
Pros of stickers
- High degree of fixation.
- Durability.
- Requires minimal material costs.
- Compactness.
- Possibility of mounting the recorder anywhere on the windshield.
Cons of stickers
- You cannot remove the DVR and take it with you if necessary.
- Cannot be moved to another location on the windshield (cannot be dismantled).
- Only high-quality expensive tape will do.
- The device must be miniature and have minimal weight.
- It is difficult to secure the device correctly and efficiently the first time.
- There is a high chance that your gadget or it may be damaged when exposed to direct sunlight.
This type of mount is suitable for those car owners who always keep their car in sight or in the garage, as well as for those who do not need to move the DVR around the cabin or take it with them.
4. Fasteners on the car dashboard
Some models of DVRs have a dashboard mounting option, that is, it is attached directly to the dashboard of the car. Most often, the recorder is attached to the dashboard using double-sided tape. This is the previous mounting option, since the adhesive tape lasts longer on plastic than on glass, although viewing angles are significantly reduced.
Advantages of mounting on the dashboard
- Convenient mounting on the dashboard.
- Many models of DVRs have a torpedo included in the kit.
- Possibility to install the device yourself.
- Reliability and durability of fastening.
- The ability to take the DVR with you without disturbing the mount.
Disadvantages of mounting on the dashboard
- Bad review.
- It is located in a visible place and can attract the attention of intruders.
- Damages the car dashboard, wires may be visible.
Mounting on the dashboard - a simple and cheap type of device mounting is suitable for those drivers who are ready to neglect beauty and viewing angles for the sake of convenience and simplicity.
Disadvantages of a DVR built into the mirror
- Impossibility self-installation(only service center employees can do this efficiently and correctly).
- Significant financial expenses for a device of this type and its installation.
- Lack of mobility (if you change your car, you will need to reinstall the DVR).
This method of mounting the DVR is the highest quality, discreet and aesthetically comfortable, since the wires are disguised and it seems that there is no foreign device in the car interior. But it is worth noting the high cost of the DVR and the process of installing it in the mirror. This type of fastening is suitable for those car owners who are willing to pay a lot of money for the quality of filming and fastening.
When choosing a mount, do not forget to pay attention to the features of your device: dimensions, shooting quality, viewing angles, quality of material, mobility, because it is based on these parameters and your needs that you can understand which type of recorder mount suits you best. And remember, it’s the little things that matter, so it’s better to attach a high-quality recorder now than to buy another one later.
64186 1
There is a completely justified reluctance to drill into the walls in the bathroom or kitchen to attach a shelf, soap dish, glass for toothbrushes, hooks and other accessories and fixtures, and using all these devices that have a suction cup may face the problem of securely fixing these bathroom and kitchen attributes to a smooth surface. tile surfaces.
Suction cups securely attach to smooth, flat surfaces such as tile, mirror, metal or glass
What needs to be done to securely glue a soap dish and other accessories on suction cups to tiles, glass or mirrors? There are several methods for attaching a suction cup so that it holds firmly on any smooth surface and does not fall off at the most inopportune moment with an object attached to it.
Advantages of attaching objects with suction cups
The main area of application for objects that have a suction cup for attaching them to a smooth tile or glass surface is the bathroom or kitchen. If previously, almost the only accessory that could be stuck to the wall using a suction cup was a hook, today the list of such items is quite extensive and is constantly growing. On sale you can find the following products with suction cups:
- hooks;
- soap dishes;
- glasses for toothbrushes;
- shower head holders;
- toilet paper holders;
- towel holders;
- decorative items;
- shelves for bathroom accessories and cosmetics.
Most often, suction cups are used in the bathroom.
The growing popularity of products with this type of fastening is due to a number of advantages that the suction cup provides:
- a soap dish, hook or any other object can be quickly, within a few seconds, attached to the desired location on the ceramic lining;
- In order for the device to be securely held on the tile, the use of mechanical and electrical tools and drilling of walls is not required for installation various brackets and clamps;
- if necessary, the product can be easily dismantled without leaving traces and transferred to another location;
- small price.
This type of fastening is intended for mounting oversized products and items that are light in weight.
Factors influencing the strength of attachment of the suction cup to the surface
There are several factors that can affect the quality of the suction cup attachment.
The reliability and strength of the connection between the suction cup and the tile depends on three factors:
- From the material from which the surface is made and its condition and quality. The base must be absolutely smooth and clean, free from chips and potholes, and it is better if the tile has a glossy front side. On matte ceramics, the adhesion of the suction cup to the surface drops significantly, and on embossed tiles it is unlikely to be able to stick anything.
- From the total weight of the device with a suction cup and the weight of the object located on it.
- On the quality of the device’s material and the presence of flaws on it. When purchasing a fastener with a suction cup, you need to pay close attention to the inner working side of the device so that there are no bumps or growths on it that will not allow the device to be securely glued to the tiled surface.
Lumps and growths on the inside of the suction cup can be cut off with a sharp knife or blade.
Mounting methods
Whatever option you choose for attaching the suction cup to the tile, before gluing it, you need to prepare the surface of the ceramic. The work consists of degreasing the installation site with any in an accessible way. It could be like processing special compounds such as acetone, as well as regular cleaning of tiles with soap solutions, followed by thorough rinsing of the surface with water.
in the bathroom, help maintain order, because this accessory allows you to place each item on its intended place
There are several ways to attach a suction cup, the most common of which we will present for consideration:
- Degreasing the gluing area. To obtain a better result, use alcohol or acetone. The method is used to attach devices that have a low total weight along with an object that will subsequently be placed on it: a soap dish, a hook for a small kitchen towel.
- Treat the working surface of the suction cup with Vaseline. This option allows you to slightly increase the load on the device and use the mount in aquariums.
- Using polyethylene circles. If this device was not included with the device with a suction cup, then you can easily make it yourself from a special film for lamination, or self-adhesive film, one of the sides of which has a sticky layer. Having cut out circles of the required diameter from the film, they are glued to the tile, and only after that the suction cup is glued.
- Bonding using silicone sealant. This method is used if the suction cup mount is subject to significant loads or the surface to be glued is not glossy. After gluing the device with silicone, it needs to be given time to harden within 24 hours and then the hook or shelf can be subjected to loads.
If necessary, the suction cup secured to silicone sealant using a thin knife or blade can be cut off and moved to another location.
Thus, by correctly using the listed gluing methods and following the recommendations on the selection of suitable products and methods of surface preparation, the suction cups, which are not entirely reliable and constantly fall off, will serve for a long time and faithfully, fulfilling the duties assigned to them.
A modern person never parts with a smartphone anywhere, even in a car, when all attention should be focused on the road. To increase the safety of each of us and improve comfort, devices such as car holders were invented.
They perform several functions at once: they provide reliable fastening of the smartphone in a certain place so that it does not slip on different surfaces in the car and is not lost in the back seat; they make controlling the car and the smartphone much easier and more convenient, especially if you use Hands Free. And if you want to use your smartphone as a navigator, then you simply cannot do without such a holder. If you are starting to think about purchasing a much-needed gadget, then before the purchase itself it would be good to clearly understand what the most convenient holder should be for you.There are smartphone holders designed for specific model. They are usually equipped with charging and several other special functions, which makes it easier to use the gadget while driving. But such devices are also more expensive than universal ones. Purchasing them is justified only if you are not going to change smartphones often, but stay with the chosen model for at least a couple of years.
That is why, in most cases, it will be more practical to buy a universal holder, which can then be converted in a matter of seconds to use a completely different gadget. The phone can be attached to them in different ways:
- using magnets, but this is not the most The best way fastening, since a smartphone can fall every now and then, although this method of fastening a smartphone is now the most popular;
- using a cone clamp. Such devices are more reliable, but you will need to immediately check how easy it is to get the phone;
- using polyurethane legs that expand to suit the specific size of the smartphone. Such holders still have the same problem: sometimes the phone is fixed in them so tightly that it cannot be easily taken out.
The holders differ not only in the way the smartphone is attached to them, but also in the way they are attached to the car panel. This is their main difference and the selection criterion for most motorists.
Suction cup holders are one of the most popular: they are easy to install and do not require damage to parts of the car interior. Most often they are attached to the windshield, but for this the surface must be perfectly smooth, clean and even, so if the glass has a significant slope, you may have to attach the holder to its upper part, which is inconvenient. The disadvantages of such fastening also include the fact that over time the holder begins to peel off and disappear, and if the suction cup is made of rough rubber, then at low temperatures it loses its elasticity and. Naturally, it falls off.
Adhesive-based holders can be attached to any surface, but after dismantling, a noticeable mark may remain. In addition, a smartphone that is too heavy may break the mount after a while. But for not very large compact gadgets, this is a good option.
The holder with fastening will definitely never fall off, but they are most often attached to ventilation deflectors. Here there are obvious disadvantages: possible noise when driving on uneven roads, broken deflector shutters, closed air nozzle, etc. Compared to all other fastenings, this is the least convenient and practical. It would be better if such a holder would be attached to a mirror, but there are very few such models.
An alternative to all holders is an anti-slip mat. It does not provide the same convenience of using a smartphone as a holder, but it can be easily removed and replaced.
1. Suction cup holder.
Holds your phone on the front panel or windshield.
2. Universal clip with flexible cord.
Allows you to rotate the gadget 360 degrees.
3. Mount on the steering wheel.
4. Width-adjustable bracket.
Installed on the fan grille.
5. Magnetic ball holder.
6. Universal magnetic holder.
7. Mobile phone panel with USB cable.
Flexible panel with anti-slip coating for a wide range of surfaces.
Loading...
