BIOS (Basic Input and Output System) is necessary for the computer to operate in principle. This is software that is “sewn” into microcircuits motherboard. Often we want to know how to enter the BIOS on Windows 10.
Before version 8, entry was made with a simple finger movement. As soon as the computer turned on, the F2 or DEL buttons were pressed and you entered the menu. In 10, they introduced a launch mode on high speed, and this step became simply unnoticeable. Try pressing DEL while loading. This works on most computers. If it doesn’t work, then proceed as indicated below.
How to run BIOS on Windows 10
First, let's look at an option that works on any computer or laptop. If your PC boots, then you can do the following:
1.Select options.
2. Go to the update and security section.
3. Click Reboot Now.
4. The computer will begin to restart. But it will be performed in a special mode. First you will see a window for selecting actions. Select troubleshooting.
5. Then go to advanced options.
6. You need to go to UEFI, that’s what the bios management program is called.
7. Then click the "Restart" button.
After rebooting, you will be able to get into the BIOS on Windows 10.
How to enter Windows 10 BIOS when the system does not boot
Here you will need installation disk or recovery disk. Once you insert it, the reboot will begin. You will see a screen with an “Install” button and a “System Restore” link at the bottom.
After you click on it, you will be taken to the same menu. Proceed as described above.
How to enter BIOS on Windows 10 if DEL does not work
In this case, disable Quick Startup mode.
1. Click the magnifying glass icon next to the main menu button and start typing “Control Panel”. Options will appear at the top. Select controls.
3. You need to go to the section “Action of the power button”
4. Uncheck the “Enable fast startup” option.
After completing these steps, click the “Save Changes” button at the bottom and reboot. Press DEL as soon as the computer turns on. You must go to Bios.
How to enter bios on Windows 10 on a laptop
Laptops may have a separate button to log into UEFI. If you want to figure out how to enter the BIOS on Windows 10 on a laptop, you need to do the following:
- Find out the model or number of the device.
- Go to the official website of the manufacturer.
- Find documentation for your laptop.
If you have documents saved on your computer, look through them.
We will list how to login to bios windows 10 for different brands:
- Lenovo. Laptops of this brand have separate button to go to the menu. You can find it near the power button or next to the power connector, depending on the model. There is a curved arrow drawn on it.
- On asus laptop You need to press F2 when loading. The trick is that when enabled, this button does not work if Fastboot mode is enabled. But when you reboot, you will be able to enter the Bios.
- On Acer, most models use the F2 button. If you can't log in, try Ctrl+Alt+Esc.
- In HP laptop models, the login button has traditionally been F10.
How to open bios on Windows 10 on a tablet
If you are the owner of a tablet with installed Windows 10, then go as described in the second paragraph - through recovery.
There is no basic system as such on Android. You can enter the engineering menu by pressing a combination of the power and sound control buttons. For each brand this will be a different combination. We advise you to find documentation on the manufacturer’s official website and read about ways to enter Bios.
Bios settings for Windows 10
After we figured out how to enable bios on Windows 10, let's understand a little about its options regarding Windows 10.
In fact basic system does not depend on the operating room. She is more responsible for the operation of the hardware. You will need to get to the Boot menu if you are installing and restoring Windows 10 from a flash drive or disk. The boot device needs to be changed.
- Go to Bios using one of the above methods.
- Then select the Boot section.
3. Select the first boot device Boot option#1 and press Enter on it.
4. Set the desired device to boot and exit with saving (Exit and Save).
If we talk about the Bios menu, we list the purpose of the main items:
- Main menu. Displays basic PC parameters, including BIOS version.
- Advanced. Processor setup, peripheral devices, video, PCI, etc.
- Overclocking. Allows you to set values for overclocking the processor.
- M-flash. Function for updating or backing up BIOS (available on MSI boards).
- Security. Setting a password for logging into the system.
- Boot. Used to install boot devices.
Depending on the BIOS version and motherboard and processor models, the menu may differ.
If you are planning to update the OS to version 10, then read about . If your PC is loading slowly, you need information about how the 0 .
Have a nice day everyone!
It is quite possible that most users of Android smartphones or tablets are unlikely to be interested in the topic of this article - “Is there a BIOS on Android?” For some, it may sound something like “is there life on Mars,” while others have a hard time imagining what this BIOS is and what it might be needed for. But, as it turned out, there is another is by no means a small category of people for whom this question arouses curiosity.
We can first advise you to get acquainted with a number of articles on our website, for example, you can read about “”. And don’t go to the far from perfect Wikipedia, where you can read abstruse phrases like “part of the system software...” and end up not understanding anything. There is no need to get into the technical jungle at all. Here you choose, we won’t interfere.
Why might this question arise?
But really, why could such a question arise? It seems to us that its roots lie in the fact that, ultimately, a smartphone or tablet, in the understanding of most people, is the same personal computer as the miracle unit standing on our desktops. It’s just that its work is based on the use of mobile and compact technologies. One of the names of a smartphone, a PDA, is a Pocket Personal Computer. Yes, and the Android OS (Android is the Russian version) is an operating system that is based on Linux OS code, which is also easily installed on a home PC. And it would seem logical to assume that there is also a BIOS, since everything is so similar...
In addition, there is some software(software), which allows you to perform a number of actions to restore the operation of a smartphone or tablet, but at the same time does not work in the shell of a common OS.
This is our guess...
What can be mistaken for a BIOS?
Our PDAs and tablets have a number of functions that are performed by certain software, such as:
- Recovering the screen unlock code or pattern;
- Installing more recent firmware;
- The need to do a HARD RESET (hard reset), because the operating system suddenly stopped loading, and the boot animation icon has been spinning for ages.
In home PCs and laptops, you can go into the BIOS and boot from a flash drive and solve a number of pressing problems without loading the OS. What about tablets and PDAs running Android OS?
Recovery Menu
And on Android you can go to a certain Recovery Menu (Recovery Menu - in conversation), which can solve the above issues.
There is no universal method that would be suitable for all devices without exception. Usually, those who want to enter the standard recovery menu are advised to hold down the volume up button when turning on the phone, and then press the power button. But if this method does not work in your case, then look online for a method that is applicable specifically to your model of Android tablet or phone.
Let's delve a little deeper into this tool...
“Stock” or “Custom” Recovery Menu
Typically, the “native” or stock (slang, from the English word Stock – “warehouse”), that is, pre-installed by the manufacturer of the tablet or phone, the Recovery menu is not rich in functionality. And its main function is to return the device to factory settings. And although in some firmware Recovery is equipped with some additional functions, there is still a high probability that instead of contemplating the Recovery Menu, you will immediately get a Wipe (reset to factory settings). So before starting “experiments” with the device, it is better to make a backup of important data.
To significantly expand the capabilities of the recovery mode, you can install a Recovery Menu written by third-party developers or custom (slang, from the English word Custom - “customized” or “custom-made”). It will replace the standard menu on the tablet and provide you with many additional functions.
True, in order to be able to install a third-party Recovery Menu, you must have root (Administrative) rights to work with the OS on your device.
For example, the most popular alternative standard menu- This Clockworkmod Recovery or CWM for short. By installing it, you will receive additional features such as:
- Ability to install various (including unofficial) Android OS firmware;
- Restore the system from a previously created backup;
- Clear ;
- Debug Android (fix) - install various updates and additions yourself.
- Format the memory card, as well as create new partitions on it.
And this is not the entire list of what you can get by installing the Custom Recovery menu. So if you don't care that much about your device's warranty (which is automatically voided after rooting), you can try out all the functionality of CWM.
Conclusion or answer to the question
Recovery Menu is not a BIOS as such. Unlike BIOS, Recovery Menu software is a set of programs that are not built into a separate chip installed on the motherboard of a smartphone or tablet, but are only located in a dedicated section on the same flash memory, next to all other software, and is an integral part of the Android operating system.
Here, a better analogy with Windows OS on branded computers, which creates a partition on the same disk backup recovery OS to its original factory state (if you did not make backups yourself). Same disk, same operating system, just allocated an area for backup copy and the shell for working with it. No more.
And there is no more software on tablets and PDAs that is in any way similar in functionality to BIOS. Hence the answer: there is no BIOS on Android. :-)
Comments on this post: 1
BIOS is a basic input-output system (from English - Basic Input-Output System), in other words, software or a system that has access to the primary hardware interface (API). This is a separate chip in the motherboard that stores the time and settings of this equipment using battery charge when the power is turned off.
The essence of this software on desktop computers is setting up and testing the hardware on the motherboard before loading the operating system. If we are talking about portable devices such as: tablets, smartphones, smart watch and similar devices, then the term BIOS is not entirely correct. Under the basic I/O system on mobile devices This means Recovery mode or in Russian recovery mode they also say: “Recovery mode”, and you can also come across the term “Engineering menu”. However, if we are talking about Windows tablets, then they use a basic input/output system similar to that on desktop systems. Since tablets with operating Windows system 8.1 has a similar architecture to desktops and laptops.
Usually, when talking about BIOS, we mean IBM compatible motherboards. For other platforms, other names may be used. For example, "PROM" or "Boot". If we talk about an IMB-PC-compatible computer, then this is a computer that is close in architecture to personal computer IBM company.
How to enter BIOS via Windows
In fact, there are only two options for entering the BIOS on a tablet with the Windows operating system: through the operating system itself (if it is possible to run it) and using a USB keyboard, you may need a USB hub. Although some tablets may still allow you to log in using a combination of mechanical keys, for example, the volume and on/off keys, while the device must be turned off. Depending on the manufacturer, these key combinations may vary, as well as the presence of the keys themselves.
So, if it is possible to start the operating system, then you need to:
Selecting update and security
Most likely you will need a USB keyboard to move around (it all depends on the tablet, some support touches in the BIOS, some only work with the keyboard and keys on the tablet itself)
As mentioned earlier, you may need a free USB input or if it is not there, then you will need a USB-HUB. Again, it all depends on the specific device.
The second method, if it is not possible to start the operating system, is to connect a keyboard and press a specific key. This may be a different key for different tablets.
How to enter recovery on Android
The operating system from search giant Google dominates the portable device market, but despite the generic name there are a large number of versions and Android modifications, and every manufacturer of portable devices makes the changes to Android and the devices themselves that they want. Therefore, there is no universal method for entering the recover menu. But we can say that this is a combination of mechanical keys with a device power key.
For example, on some devices this is the volume up key + volume down key (+ this at the same time) + power off/on key, on other devices it’s just the volume up key + power on without other keys. And since on different devices different key combination, then the combination to enter the “Recovery” engineering menu will be different.
If we talk about engineering menu In general, this emergency menu is necessary in cases of damage to important files by the operating system. What can damage the operating system? Yes, anything, from viruses to accidental deletion or modification system files or errors encountered during an operating system update. And when your expensive Android tablet stops booting, recovery mode can help in such cases.
Using recovery mode (some may call it BIOS for tablets, smartphones), you can update your device to working version, in other words, if after updating your device it stopped working, then you can go back to previous version operating system, or vice versa, if the device does not boot, but a new version has been released, then update in the hope that with new version the device will work. And yet, if you complete newbie It is better to contact specialists or those who were involved in restoring the operation of the device. In the recovery mode of the engineering menu, you can specify a specific update, which must be placed on the SD card in advance using a card reader.
An engineering recovery menu may also be needed if you want to sell your device to someone. Here you can select “wipe/factory reset” to completely delete all files and return the device to its original state. To avoid accidentally transmitting any important data, for example, information about credit cards, account passwords and other confidential information.
BUT PLEASE ATTENTION IF YOU CHOOSE “WIPE/FACTORY RESET”, YOUR DATA WILL NOT BE RESTORED!
Thus, BIOS in portable devices can be understood as a BIOS similar to what we see on stationary devices, desktop computers as well as the engineering menu on tablets and smartphones. It all depends on the device architecture, manufacturer, and operating system.
AlexZsoft.ru
How to enter BIOS on a Windows 10 tablet
BIOS is software that sets all low-level settings for the motherboard and its components. Booting into the BIOS from a desktop computer or laptop is quite simple. To do this, you need to press a certain key combination while the device is rebooting. With tablets things are different. Some models do not have a BIOS at all, and in those gadgets that do have it, the boot method is described by the manufacturer in the user manual. However, if you do not have such instructions, we will look at how to enter the BIOS on a Windows 10 tablet.
Read also: How to find out the BIOS version and mode in Windows 10 without rebooting the system?
Booting into BIOS on a Windows 10 tablet
In order to enter the BIOS from the tablet under Windows control 10, you should do the following:
- Click on the “Start” button and select “Settings” (similar to the PC version with Windows 10).
- The line “Change parameters” will appear at the bottom. Let's tweak it.
- A menu will appear on the left where you need to select the bottom line “Update and Recovery”.
- Here you will see a small list of functions, select the “Recovery” section.
- On the right, click on “Reboot Now”.
- The gadget will begin to reboot. The screen will turn blue. A menu called “Select Action” will appear again. Here we select the item “Diagnostics”, and in it – “Advanced parameters”.
- A window will open with various system functions. You need to click “UEFI Firmware Settings”, and then “Reboot”.
When the tablet turns on again, you will automatically be taken to the BIOS.
The method for entering BIOS on a Windows 10 tablet using a connected keyboard is not much different from what was described above, but there are still some differences. Therefore, we recommend that you familiarize yourself with this method in the video:
SoftikBox.com
How to enter BIOS on a tablet
A tablet, like a smartphone, laptop or desktop computer, is a minicomputer. It uses almost the same components and modules, but they are all solid-state and have their own characteristics. Therefore, in theory, it should also contain programs for launching and identifying equipment.
Unfortunately, this opinion is quite common and is not true. IN Android devices Instead of BIOS there is an engineering menu called Recovery. And BIOS is available on Windows tablets.
So, you can enter Recovery in two ways: from the system and when you turn on the device. To enter the menu from the system, it must have a similar function. When you press the tablet's power button, a menu pops up, in which there should be an item to reboot into Recovery. If it is not there, then turn off the device, press the “on” and “volume +” buttons simultaneously. The tablet will boot into the engineering menu.
In this operating mode, the sensor does not work, so moving through the menu items is done using the “+” and “–” buttons of the volume control. To consent to the execution of the selected item, use the “on” button, which plays the “execute” function in the menu. It is worth noting that after a certain period of time, the device itself will leave the menu and reboot in normal mode.
Attention! All manipulations in the engineering menu do not provide “fool protection”, so actions may be irreversible. Random clicks keys and incorrect actions can lead to data loss and damage to the device.
Why is an engineering menu necessary?
The Recovery menu provides several options for updating the system, resetting settings, and restoring the device after a failure. Let's take a closer look at the menu items.
The sequence of items may not be the same, but the first line, as a rule, is “reboot_system” - reboot the system in normal mode. Next comes a set of items with the common beginning “apply_update_from”, which allow you to update from the existing distribution. For example, run a firmware file of a new or simply different version, install a patch, etc. These lines continue with options: external_storage - with external media; internal_storage - from internal storage, the tablet’s system memory; cache - from the internal system cache section.
Next comes the most formidable item - wipe_datafactory_reset. It allows you to reset the system to the parameters set by the manufacturer. All information on the tablet will be erased, and it will have the functions and programs provided by the manufacturer. Selecting the wipe_cache_partition item will allow you to reset the operational information. IN system folder cache, which is used by the system as operational storage, the information will be completely erased.
Next comes the software manufacturer’s lifesaver – backup_&_restore, by running which you can restore the system from backup storage. The manufacturer provides a working image of the system that can bring the tablet into working condition when loaded.
androidtab.ru
How to enter BIOS on Windows 10
By default, you can get into the BIOS by pressing a certain button on the keyboard when booting the PC (F2, Del, Assist and others), however, in Windows 10, fast boot is enabled by default, and even knowing which button to press, you may not get into the BIOS the first time get in. Moreover, Windows tablets do not have a keyboard at all, and not everyone knows their BIOS key. However, Microsoft has provided for this, and you can get into the BIOS from the system. To do this, click on Start > Settings > Update & Security > Recovery > Restart now: 
On the opened blue screen Select Diagnostics > Advanced Settings > UEFI Firmware Settings. The computer will reboot and you will be taken to the BIOS.
www.iguides.ru
How to enter BIOS (Recovery) on a tablet
It is possible that few people know that in the operating room Android system In general, there is a BIOS, but most people don’t even think about why they go there and how it can be useful to them. If you are one of these people, then great; in case of a software failure, it is best to take your device to service center for qualified assistance from specialists. Essentially, a tablet is also a minicomputer like a smartphone or a desktop PC, and it uses many similar modules and components (though they are all solid-state and have their own characteristics). Therefore, many believe that the tablet should have the same launch and hardware identification programs. But this is not so, because in devices with Android, instead of BIOS, there is an engineering menu - Recovery, and BIOS is available on tablets running Windows.
There are two ways to enter Recovery:
from the system, in this case you need to make sure that it has this function;
when you turn off the tablet, i.e. When you press and hold the power button, a menu appears in which you need to select reboot into Recovery; if it is not there, then turn off the tablet by simultaneously pressing the power button and the volume button in the “+” position, and the device will boot into the engineering menu.
Things to remember:
first thing we do backup, since if something goes wrong, there is a high probability of data loss;
In the engineering menu, the tablet's sensor will not be active, so all switching between fields is done by toggling the volume button.
Now it's time to explain why engineering is needed Recovery menu.
This menu provides several options for updating the system, restoring the tablet, full reset settings.
To update the system, select the first line in the menu “reboot_system” - reboot the system in normal mode, followed by the items “apply_update_from”, thanks to which all updates are carried out.
To restore the system, you need to use "backup_&_restore" and it helps if you need to restore from backup storage. The manufacturer provides a working image of the system that can bring the tablet into full working order when loaded.
If you go to the "wipe_data\factory_reset" item, this will help you reset the settings to the factory settings. However, remember that if you select this item, all information will be lost.
And once again let’s return to where we started, if in fact you don’t know at all about this side of your tablet or you accidentally entered this menu, then it’s best to exit it or take the device to a service center, where the technician will easily and without losing your data will return everything back.
A tablet, like a smartphone, laptop or desktop computer, is a minicomputer. It uses almost the same components and modules, but they are all solid-state and have their own characteristics. Therefore, in theory, it should also contain programs for launching and identifying equipment.
Unfortunately, this opinion is quite common and is not true. In Android devices, instead of the BIOS, there is an engineering menu called Recovery. And BIOS is available on Windows tablets.
So, you can enter Recovery in two ways: from the system and when you turn on the device. To enter the menu from the system, it must have a similar function. When you press the tablet's power button, a menu pops up, in which there should be an item to reboot into Recovery. If it is not there, then turn off the device, press the “on” and “volume +” buttons simultaneously. The tablet will boot into the engineering menu.
In this operating mode, the sensor does not work, so moving through the menu items is done using the “+” and “–” buttons of the volume control. To consent to the execution of the selected item, use the “on” button, which plays the “execute” function in the menu. It is worth noting that after a certain period of time, the device itself will leave the menu and reboot in normal mode.
Attention! All manipulations in the engineering menu do not provide “fool protection”, so actions may be irreversible. Accidental keystrokes and incorrect actions can lead to data loss and damage to the device.
Why is an engineering menu necessary?
The Recovery menu provides several options for updating the system, resetting settings, and restoring the device after a failure. Let's take a closer look at the menu items.
The sequence of items may not be the same, but the first line, as a rule, is “reboot_system” - reboot the system in normal mode. Next comes a set of items with the common beginning “apply_update_from”, which allow you to update from the existing distribution. For example, run a firmware file of a new or simply different version, install a patch, etc. These lines continue with options: external_storage - from external media; internal_storage - from internal storage, the tablet’s system memory; cache - from the internal system cache section.
Next comes the most formidable item - wipe_datafactory_reset. It allows you to reset the system to the parameters set by the manufacturer. All information on the tablet will be erased, and it will have the functions and programs provided by the manufacturer. Selecting the wipe_cache_partition item will allow you to reset the operational information. The information in the system cache folder, which is used by the system as operational storage, will be completely erased.
Next comes the software manufacturer’s lifesaver – backup_&_restore, by running which you can restore the system from backup storage. The manufacturer provides a working image of the system that can bring the tablet into working condition when loaded.
BIOS is software that sets all low-level settings for the motherboard and its components. Booting into the BIOS from a desktop computer or laptop is quite simple. To do this, you need to press a certain key combination while the device is rebooting. With tablets things are different. Some models do not have a BIOS at all, and in those gadgets that do have it, the boot method is described by the manufacturer in the user manual. However, if you do not have such instructions, we will look at how to enter the BIOS on a Windows 10 tablet.
Booting into BIOS on a Windows 10 tablet
In order to enter the BIOS from a tablet running Windows 10, you should do the following:
- Click on the “Start” button and select “Settings” (similar to the PC version with Windows 10).
- The line “Change parameters” will appear at the bottom. Let's tweak it.
- A menu will appear on the left where you need to select the bottom line “Update and Recovery”.
- Here you will see a small list of functions, select the “Recovery” section.
- On the right, click on “Reboot Now”.
- The gadget will begin to reboot. The screen will turn blue. A menu called “Select Action” will appear again. Here we select the item “Diagnostics”, and in it – “Advanced parameters”.
- A window will open with various system functions. You need to click “UEFI Firmware Settings”, and then “Reboot”.
When the tablet turns on again, you will automatically be taken to the BIOS.
The method for entering BIOS on a Windows 10 tablet using a connected keyboard is not much different from what was described above, but there are still some differences. Therefore, we recommend that you familiarize yourself with this method in the video:
Loading...
