In order to do network folder in Windows XP, create a folder, for example "Network Folder", right-click on it and select " Properties".
In the properties window, go to the " tab Access" and check the boxes next to " Open general access to this folder", if it is necessary that network users can change (add, delete) files in this folder, check the box - " Allow modification of files over the network".
At this point, the creation of a network folder (called a “share”) can be considered complete. As you can see, a hand has appeared at the bottom of the folder, this means that the folder is network.
In order for other users to see it on the network, you need to go to network , choose " Show workgroup computers", find the computer on which the network (shared) folder is located, click on it and see the network shared folder there.
You can click "Start" - "Run" or keyboard shortcut "Win" + "R", enter //<имя или IP компьютера> , For example //comp, press the Enter key, all shared folders on the computer will open.
network drive .
How to make a network folder in Windows 7.
Properties".
In the properties window, go to the "tab" Access" and press " General access".
Now you need to add the necessary users and give them the appropriate access, in in this example full access(the ability to change and delete files) on the folder will be available to everyone. In the Add field select " All", in column Permission level select " Read and Write", press " General access".
Ready".
After that, go to " Start" - "Control Panel" -" or click on the button Network connection on the taskbar and select "Network and Sharing Center".
In the window that opens Network and Sharing Center look at what network is being used (in this example - Work) click on "".
In the profile you are using (home, work or general), make the necessary changes, namely:
Scroll down and:
Save your changes.
At this point, setting up a network folder in Windows 7 can be considered complete.
Computer, on the right click " Net", select the computer on which the network folder is located, all shared folders on the computer will open on the right.
Another way is to click "Start" or keyboard shortcut "Win" + "R" and enter //<имя или IP компьютера> , For example //User-PC.
For ease of use, you can connect a network folder network drive .
How to make a network folder in Windows 8.
In order to make a network folder in Windows 7, create a folder, right-click on it and select " Properties".
In the properties window, go to the "tab" Access" and press " General access".
Now you need to add the necessary users and give them the appropriate access; in this example, everyone will have full access to the folder (the right to change and delete files). In the Add field select " All" and in the column Permission level select " Read and Write", press " General access".
A message window will open indicating that the pack has become online. Click " Ready".
After that, go to "Control Panel" - "Network and Sharing Center"" or click on the button Network connection on the taskbar and select "Network and Sharing Center".
In the window that opens, look at what network is being used (in this example - Public) click on " Change advanced sharing options".
In the profile you are using (private, guest or public), make the necessary changes, namely:
Enable network discovery;
Turn on file and printer sharing;
Go to the "tab" All networks":
Enable sharing to allow network users to read and write files in shared folders.
Disable password protected sharing.
Save your changes.
At this point, setting up a network folder in Windows 8 can be considered complete.
To use the network folder, go to Computer, on the right click " Net", select the computer on which the network folder is located, by clicking on the required computer, all its shared folders will open on the right.
Another way is to press the keyboard shortcut "Win" + "R", enter //<имя или IP адрес компьютера> , For example //pk2. By pressing Enter, a window with shared computer folders will open.
For convenience, the shared folder can be connected network drive .
I hope now you are not dependent operating system Windows XP/Windows 7/Windows 8, you can share the folder without any problems.
Often users find themselves in a situation where they need to hide the contents of a folder or file from prying eyes, so the question arises of how to put a password on a folder.
Unfortunately, the developers of the Windows operating system did not provide for such a function as setting a password for individual user files and directories.
The OS can only be configured to prohibit certain users from using or viewing a specific type of directory, file or program.
Setting a password for a folder is necessary if:
- you want to hide your files from unauthorized access by others;
- want to protect your personal data from illegal copying or distribution.
Set a password for the archive
Using this method, you can password-protect a folder with any type of file, while it is possible to hide the very fact that the archive contains files of a certain format.
The window for entering the code will pop up even before the archive opens, so it is impossible to find out about its contents if the user does not know the combination. A password for an archive without programs is the easiest way to protect folders.
Advice! The function of setting a password for an archive does not require preliminary installation of an additional software, you just need to have preinstalled free programs WinRAR or 7-ZIP.
To add the desired folder to the archive and password protect it, follow the instructions below:
- Right-click on the folder you are interested in and add it to the archive, as shown in the figure;
- Immediately after you have selected the “add to archive” action, a window will appear with various settings parameters of the created archive. Go to the tab with additional parameters and find the button to set a password, it is shown in the figure;
- Click on the button that allows you to set a password.
After this action, a small input window will immediately appear. New code must be entered twice (to verify correct insertion). You can also check the box next to the option to encrypt file names.
Thus, third-party users will not be able to find out anything about the type of files being hidden.
The process of setting a password for an archive
After trying to open the archive, we see that you first need to enter the code and only then can you view and edit its contents.
This method Installing the code is the simplest and quite effective. However, to implement it you will need to have one of the archivers on your computer.
Also, if the code is forgotten or lost, restoring the contents of the archive will become quite a difficult task for the user. This is why you should keep backup copy protected files, for example, on cloud storage.
Using the above method, you can also password-protect an archive on a flash drive.
Using PasswordProtect USB
On the Internet you can find a huge amount of third-party software that can cope with the task of installing code on the system object you need.
A large proportion of such programs, unfortunately, can harm your files rather than protect them from unauthorized access by other users.
This article presents the most popular and common types of software that have been tested by a large number of users, so these programs will not harm your computer and files that need to be password protected or hidden.
This program is available for download and installation on PC and is compatible with Windows 10.
PasswordProtect USB allows you to password protect folders and remove the previously installed encryption. The application has an intuitive user interface, so working with this utility will not be a difficult task for the user.
You can start the code installation process not only using the main program window, but also using the computer desktop.
After you have installed this software on your operating system, the installation function will be displayed in the menu of each folder, you just need to right-click on it, as shown in the figure:
- Next step You must enter the code in the window that opens. Enter it twice to eliminate the possibility of error.
- After installing the code, a sign will be displayed on the folder icon, indicating that the folder is protected. When you try to open a password-protected folder, the following dialog box will appear. This is the most common way to put a code on photo folders.
Folder Lock Software
This program can protect a folder on a laptop or PC. Supported operating systems: Windows 7, Windows 8, Windows 10. The utility encrypts the folder itself, without an archive.
You can put the code on a folder with absolutely any content: files, photos and documents.
To install it on a folder using this program, follow the instructions:
- Download and install Folder Lock;
- Enter a password in the text field, which will be the folder password;
- Click OK;
- Drag the desired folder to the main program window or use the “add” icon;
- After the folder has been added, it immediately becomes locked and can only be opened by a person who knows the password.
Set a password for a network folder
You can also password-protect a network folder. To do this, you can also download separate programs, for example:
You can also use the program Folder Guard(
The “My Computer” icon opens to us fast access to your hard drive (or solid state drive), flash drives, etc. However, if you are one of the users who have nothing unnecessary on their desktop, then you can easily afford to place shortcuts on it various programs. To do this, we suggest using the method proposed in this article.
Using this method, you can add shortcuts to frequently used programs to the My Computer menu. This means you'll have quick access to programs or folders, as well as quickly switch between tabs in Windows Explorer.
Adding software shortcuts to My Computer
You need to start by opening a special folder. The shortcuts you place in it will appear in the My Computer menu.
Press the Windows key + R, enter "%appdata%" and click OK.
Then go to Microsoft>Windows>Network Shortcuts. The software shortcuts you add here will appear in My Computer, that's all.
After you send the desired shortcuts to this folder, the corresponding shortcuts will appear in the My Computer menu.
Adding folder shortcuts to My Computer
You can add any shortcut, and a folder shortcut is no exception. This can be done easily and simply: right-click on a frequently used folder and select “Create shortcut”.
Now you just need to cut (Ctrl+X) the created shortcut and paste (Ctrl+V) into the “Network Shortcuts” folder (as in the previous case).
Adding Control Panel shortcuts
Among other things, you can get quick access to frequently used control panel shortcuts. All you have to do is drag the desired one from the control panel into the “Network Shortcuts” folder.
This is what you will end up with when all the shortcuts are added:
Now “My Computer” contains all the shortcuts that you often use, which will significantly speed up your work and save your time spent on the computer.
If you frequently work with any documents, it may be more convenient to create a folder on your desktop for quick access to them. This is not difficult to do, however, for novice users this operation may cause difficulty. In this tutorial we will look at how to make a folder directly on the Windows desktop.
An example of this operation will be considered using the Windows 7 operating system as the most popular at the time of publication of the material. In others Windows versions the process will be similar. So:
Due to inexperience or accident, the user may, at the moment of assigning a folder name, press Enter without renaming it, or click the mouse on the desktop, then it will be fixed with the default name - “ new folder " No big deal, it just needs to be renamed.
Renaming can be done in two ways:
Many users store documents on their desktop in folders or even as separate . Undoubtedly, this approach speeds up access to the necessary documents, because you do not need to open Explorer and search for the desired object on the disk. However, not all users (even experienced ones) know that you can simply display folders stored on local disk, to your desktop and get quick access to it without opening Windows Explorer. That is, the folder itself is located on the disk, and not on the desktop, and its shortcut is used to open it directly from the desktop. This approach is considered the most correct from the point of view of organizing storage and working with documents.
Open Windows Explorer or browser " Computer" and find the desired folder on your computer's hard drive.
For those who forgot: the explorer can be opened by clicking right button mouse on the Start button and selecting “ Open File Explorer"or by left-clicking on the Explorer icon in the taskbar on the left.
Right click on the desired folder to call the context menu, where select " Create a shortcut».
As a result of this operation, the shortcut “ name of the selected folder-Shortcut»,
which, by clicking with the left mouse button (LMB on the shortcut and not releasing), you need to drag it to the desktop.
The “Computer” icon on the desktop helps the user, if necessary, very quickly access the hard drive or its logical partitions, as well as flash drives and CD drives. But few people know how to add a shortcut to frequently used programs, folders and system files settings from the Control Panel into it.
By adding these shortcuts, you get the opportunity to quickly open the necessary directory or program, which you previously periodically spent your precious time searching for, or quickly launch any settings file from the Control Panel that you use constantly.
For me, for example, before using this method, it was completely inconvenient to work with the folder cloud storage data, even though its icons are located on the desktop and in the system tray of the operating system. I also use the “Run” command very often.
So why not add its icon to “Computer”? In this step by step instructions I'll show you how you can implement all this in the operating room. Windows system 7.
HOW TO OPEN THE NETWORK SHORTCUTS FOLDER. Press the Win + R key combination on your keyboard to launch system program“Run.” In it we write %appdata%, click the “OK” button and then get into the “Roaming” directory.
HOW TO ADD A LABEL
Using the context menu of Explorer, which is called by right-clicking on the file, we create a shortcut necessary program or catalogue. We place it in the “Network Shortcuts” folder we opened.
HOW TO ADD A SYSTEM SETTINGS FILE. Go to the Control Panel and simply drag and drop any of the parameters into the same folder.
HOW TO ADD A UTILITY FROM THE START BUTTON MENU. Click on the “Start” button and call context menu on the required utility, go to “Send” and click “Desktop (create shortcut)”.
We also move the created shortcut from the Desktop to “Network Shortcuts”. That's all! All changes take effect immediately and without rebooting the operating system. Now you can get quick access to the most necessary directories and files just by opening “My Computer”.
Thank you for your attention!
Loading...
