How to use the headset. How to use a wireless Bluetooth headset. Setting the sound of a bluetooth headset. How to use a wireless Bluetooth headset How to use a wireless earphone

I will tell you how to use a Bluetooth headset for your phone and how to set it up for the first and subsequent connections in the instructions below. The main convenience you get when using wireless headset– it allows you to free your hands while driving, working, or walking – and at the same time stay connected. I use the headset all the time. Including, I listen to music with its help. And for a motorist, it is simply irreplaceable, since holding a phone in your hands while driving is prohibited by traffic rules.

The question of how to set up a Bluetooth headset is quite simple, and I will talk about it below. However, here you need to know some nuances. For example, when you reconnect to another smartphone, it may not see working headphones. However, this problem is easy to solve.

How does a wireless device work?

To understand how to use your device, you need to know how a Bluetooth phone headset works. First of all, it is a means of communication, combined headphones and a microphone. The device communicates with the smartphone via wireless communication. In order for information to be transferred correctly, several conditions must be met:

the phone is connected to the headset (they are paired);
the earphone is designed for communication (has the required profile);
Bluetooth technology enabled;
for iPhone – version wireless adapter from 4.0.

If any connection problems occur, most often they are associated not with the smartphone, but with the headset. The only setting you can use on your phone is turning Bluetooth on and off. The headphones themselves may have a power button, pairing button, volume control and built-in functions (profiles). For example, in order to use a Bluetooth headset as headphones for listening to music, this possibility must be indicated in the characteristics. Otherwise, you can use a special application on your smartphone, but the quality of the music will be low, since this function was not originally intended to be used on this device. Additionally, pressing the pairing button can have different modes depending on the duration.

Setup: first connection

Before you use a Bluetooth headset for your phone, you need to configure it. After the first setup, the connection to the same smartphone or tablet will occur automatically. I will describe the setup for the first connection step by step:

Step 1: Prepare your smartphone

Setting up a Bluetooth headset begins with turning on wireless communication on your smartphone. In some cases, the phone must be in discovery mode.

Step 2: Prepare your device

Press the pairing button on the device while it is turned on and hold it for up to 15 seconds. The indicator on the earphone should blink.

Step 3: Pairing

The device will appear in the smartphone menu, among the list of wireless gadgets. Select it and, if necessary, enter the pairing code (PIN). It is indicated in the instructions for the Bluetooth headset for the phone, or is set by default - 0000 or 1234. After this, the connection will occur within a few seconds (up to a minute).

Step 4: Audio Transfer

In the connection settings of the wireless device there is a checkbox “Sound during calls”. This option may also be called Hands Free Profile or something similar. In order for the sound during a call to be transmitted to the earphone, select it. Now you can receive calls and talk through a Bluetooth headset.

Reconfiguration

You can often encounter a problem when working headphones do not want to connect to another smartphone. The phone simply doesn’t see them. This is a special option created to make life easier for users. But often it only leads to unnecessary worries.

The answer to how to reconfigure a Bluetooth headset to another phone is simple. Usually you need to hold down the pairing button for 15-30 seconds. Then the gadget will go into its original state - detection mode. Sometimes you need to press another button: answer a call, turn it on. If you don't succeed right away, try different keys. After a while, the indicator will begin to flash rapidly or remain lit. When the phone does not see the gadget, this method is the first thing to try.

Possible problems

How to use a headset on a smartphone - quite simple instructions. Problems that may arise during the process are also easy to solve. You may need:

reboot your devices;
check if Bluetooth is turned on;
replace batteries or accumulator.

I hope you find this guide helpful and can use your headset without any problems. You will see for yourself how convenient it is.

Instructions forBluetoothheadset

Charger:

The headset has a built-in lithium battery; Charge the battery until fully charged before use.

2. Connect Charger to the headset, via the charging port.

3. During the charging process, the LED indicator will work, after the battery is fully charged, the indicator will go out.

Note:

1. A full charge takes about 90 – 120 minutes.

2. When charging for the first time, charge the device for at least 4 hours.

3. Carry out the first 3 charges only after the headset is completely discharged until the headset is fully charged.

4. The device will charge at temperatures from -10 to +45 degrees Celsius.

On/off:

1. Hold the “On” key pressed for about 3 seconds until the indicator turns on, the device will be turned on.

2. To turn off the device, hold the “On” key pressed for about 3 seconds; After the indicator flashes 3 times, the device will be turned off.

Creating a connection with a mobile phone:

1. Before you start creating a connection, make sure that the headset is turned off.

2. Turn on the Bluetooth function on your phone.

3. Hold the “On” key pressed for about 5 seconds; the indicator will flash red and blue alternately (for Jabra and Motorola headsets the indicator will be constantly on), this means that the device is in connection mode.

3. Search for new Bluetooth devices on your phone.

4. In the mobile phone device window you will find the inscription “SANYO BL812”, “Jabra” or “Motorola”.

5. Select "SANYO BL812", "Jabra" or "Motorola" and create a connection.

6. Enter the connection PIN code 1234 For "SANYO B.L.812" or 0000 For "Jabra" and "Motorola", press the “yes” button, the indicator will stop flashing alternately in red and blue, and will start flashing blue (for Jabra and Motorola headsets, the indicator will stop constantly flashing blue and start flashing blue). This means the connection was successful.

7. After connecting the headset to the phone, be sure to restart the headset (turn it off and then back on after 10 seconds).

8. Now the headset will be in ready mode, you can make and receive calls.

Note:

1. If a connection is not created within 90 seconds, the headset will automatically go into standby mode. However, you cannot use the headset. Repeat steps 1-6 to create a connection.

2. When creating a connection; The recommended distance between devices is less than 1 m. There should be no metal obstacles between the devices. This headset has a PIN code of “1234” or “0000”. Different mobile phones have different ways settings, refer to your phone model's manual for instructions.

3. If a connection is created, it will be maintained even under the following circumstances:

1) the device will be turned off

2) one of the devices stopped working

3) one of the devices will be rebooted

How to receive calls:

1. When you receive a call, press the “Talk” key after you hear the call.

How to end a conversation:

1. After finishing a call, press the Talk key to end the call.

2. You can also wait until your interlocutor disconnects, then you will disconnect automatically.

Redialing last call :

1. If your phone has the “Last Call Redial” function, you can use it using a headset.

2. The function is activated by double pressing the “Talk” key.

Volume control:

1. To increase the volume, press the Volume+ key.

2. To decrease the volume, press the "Volume-" key.

The manufacturer of micro-earphones is NANO phones.

Representative of NANO phones company in Nizhny Novgorod.

Make sure that the phone to which you plan to connect a wireless headset is equipped with Bluetooth - wireless data transfer technology. If your phone does not have this technology, connect wireless headset it won't work for him. You can check the presence of Bluetooth in your phone by reading its instructions, or by looking at the phone menu.

Turn on your wireless headset. On it, you need to press the multifunction button and hold it until the operating mode indicator turns on. Then you should turn on the phone with which you want to connect the headset and turn on Bluetooth. In the Bluetooth menu, you need to run the search command for compatible devices. Scanning process, depending on speed Bluetooth operation on the phone and headset it can take from a few seconds to a minute.

Once the scan is complete, a list of compatible equipment will become available. From there you need to select a wireless headset. You may need to enter a passcode to transfer data via Bluetooth. In this case, you need to enter the code specified in the instructions telling you how to set up the wireless headset. Typically this is 0000. After entering the code, a connection to the wireless headset will be established. You will only need to enter the code the first time; it will not be required in the future.

When the connection between the phone and the headset is successfully established, the indicator on the headset will begin to blink. Now you need to go to the Bluetooth menu, then to the list of paired devices and select a wireless headset. So, the headset is connected and ready to go. Such manipulations need to be performed only once. In the future, you just need to go to the Bluetooth menu, then to the list of paired devices and select the headset.

If you don't know how to set up your headset to connect to your computer for Skype, try the following steps. First, you need to switch the headset to discovery mode. Secondly, run a program on your computer to search for Bluetooth devices. If there is a “Bluetooth environment” shortcut, you need to click on it, and if not, right-click on the Bluetooth icon and select “open Bluetooth environment” or “Add device”.

Next, you need to carry out the process of pairing Bluetooth devices. The last step is to launch and Skype setup for working with a wireless headset. To do this, you need to open the application settings: Tools, then Options, and then Sound Devices. In the Audio Out and Audio In fields, select Bluetooth Audio. In order to start communicating, you need to activate the connection between the headset and the computer. To do this, open the “Bluetooth environment” and double-click on the headset icon.

Some users of older phones encounter difficulties installing the headset. The interface of these devices is far from perfect, but they are reliable, inexpensive and therefore still popular. In this article you will learn how to set up a Bluetooth headset to work with some popular brands of phones.

How to set up a headset: instructions

First of all, make sure that both your phone and headset are turned on. After that, put the headset into device search mode.

On the M2500 headset model from Platronics, this is done by setting the multifunction wheel to the “up” position and pressing the call button. If you have an M3000 or M3500 headset, then you also need to move the wheel up, then press the answer button and lower the volume control knob. Until the green and red LED indicators of the headset blink, do not change anything in its settings.

Phone setup

After setting the headset to search mode, you need to configure the phone. To do this, select “Search for Bluetooth headsets” in its menu. When the phone and headset detect each other, you need to specify the headset model in the mobile phone menu. In the example described, it will be “M2500 by Plantronics” or “M3000/3500 by Plantronics”. The setup procedure for some specific phone models is described below.

When your phone prompts you to enter your password, dial “0000.” The headset is now configured and paired with your phone. If, after several attempts to set up the headset, you are unable to connect it to your phone, you need to contact Plantronics support. Now we’ll touch on in detail how to set up a Bluetooth headset on individual phones.

Siemens S55

Press the key located under the word Menu, which is present on the screen. After this, move the cursor to "Setup" and press the "Select" button. Switching with the down and up buttons of the joystick, select the "Connectivity" item, open the "Bluetooth" sub-item in it, select "Options" and then "Activate".

Next, in the "Options" menu, select "Search for" and click "Access". At the same time, Bluetooth devices will appear on the screen. Select from them M2500 (3000/3500) Plantronics and press "Select". The phone will now ask you for a password. You need to enter, as already mentioned, “0000” and click Ok.

Nokia 6310

Go to the phone menu and select Bluetooth there. Select "On" and press "Select". After this, the phone will see your headset if it is in search mode. Select it (M2500(3000/3500) Plantronics) and press "Select". After which you will be asked to enter a password (“0000”).

Ericsson T39

With your phone turned on, visit the "Extras" menu and click "Yes". Now look for the "Bluetooth" section, select the "Operation Mode" item in it and set it to the "On" position.

To search for nearby Bluetooth headsets, go to "Paired Devices". Select the option "Add Device" - "Phone Initiates" -> "Headset". Then select your headset from the list of devices that appear, enter the password “0000” and click “Yes”.

How to connect a garnish to a computer

Before setting up the headset on your computer, you need to connect the Bluetooth adapter to the USB port and install the driver for it. Now put the headset into search mode, just like you did when connecting it to your phone and follow these steps.

On the Bluetooth icon in the tray you need to click right click mouse and select from context menu item "Bluetooth Setup Wizard".
From the new list that appears, indicate “I want to find a specific Bluetooth device...” and click “Next”.
The computer begins searching for Bluetooth devices nearby. It is important that the headset remains in search mode at this point. If suddenly it exits this mode, launch it again, and on the computer click “Search Again”.
When the headset is found and its name appears on the computer monitor, double-click on it.
A window will appear asking you to enter your PIN. Enter "0000" and click the "Initiate Paring" button.
Now you should see on the screen available services for the headset. Check the box next to each of them and click the “Finish” button.
Now, as soon as you press the answer button on the headset, it will connect to the computer as an audio device. Another way to connect it is by right-clicking on the Bluetooth icon in the tray and selecting the submenu "Quick connect" - "Head Set" - "Headset". Using the same steps, the headset is disconnected from the computer.

The headset is connected to the computer. Now, in order to communicate through it on Skype or listen to music through it, you need to set this device as the default one in Skype or Windows, respectively.

How to set up a headset: instructions

First of all, make sure that both your phone and headset are turned on. After that, put the headset into device search mode.

Phone setup

After setting the headset to search mode, you need to configure the phone. To do this, select “Search for Bluetooth headsets” in its menu. When the phone and headset detect each other, you need to indicate the headset model in the mobile phone menu. In the example described, it will be “M2500 by Plantronics” or “M3000/3500 by Plantronics”. The setup procedure for some specific phone models is described below.

Siemens S55

Nokia 6310

Ericsson T39

With your phone turned on, visit the "Extras" menu and click "Yes". Now look for the "Bluetooth" section, select the "Operation Mode" item in it and set it to the "On" position.

How to connect a garnish to a computer

On the Bluetooth tray icon, right-click and select "Bluetooth Setup Wizard" from the context menu.
From the new list that appears, indicate “I want to find a specific Bluetooth device...” and click “Next”.
The computer begins searching for Bluetooth devices nearby. It is important that the headset remains in search mode at this point. If suddenly it exits this mode, launch it again, and on the computer click “Search Again”.
When the headset is found and its name appears on the computer monitor, double-click on it.
A window will appear asking you to enter your PIN. Enter "0000" and click the "Initiate Paring" button.
The available services for the headset should now appear on the screen. Check the box next to each of them and click the “Finish” button.
Now, as soon as you press the answer button on the headset, it will connect to the computer as an audio device. Another way to connect it is by right-clicking on the Bluetooth icon in the tray and selecting the submenu "Quick connect" - "Head Set" - "Headset". Using the same steps, the headset is disconnected from the computer.

Instructions forBluetoothheadset

Charger:

The headset has a built-in ; Charge the battery until fully charged before use.

1. If your phone has the “Last Call Redial” function, you can use it using a headset.

2. The function is activated by double pressing the “Talk” key.

Volume control:

1. To increase the volume, press the Volume+ key.

2. To decrease the volume, press the "Volume-" key.

The manufacturer of micro-earphones is NANO phones.

Representative of NANO phones company in Nizhny Novgorod.

How to use a Bluetooth headset? Despite the fact that such devices have been in wide demand for quite some time, the number of users is still growing every day. This is not strange, because wireless HandsFree is very convenient, even for listening to music at home.

But, before moving on to the question of how to use a Bluetooth headset, you should understand what it even is? After all, this is the basis that will allow you to better understand the operating principle of such equipment.

What is a wireless headset

It is worth noting that there are a huge variety of different types, types and options for such accessories:

Stereo or mono.
Supporting different standards (2.1, 3.0, 4.0 and so on).
With additional functions, for example, the ability to connect to two phones at once.
Vacuum, liners and overhead, and much more.

To answer the question of how to wear a Bluetooth headset correctly, you should start from what type it is. For example, over-ear headphones are placed on the head and secured with a bow. If we are talking about vacuum ones, then they are inserted into the ear canal, just like regular earplugs.

The main rule is that you should be comfortable in them. In addition, you must be able to hear your interlocutor well during a conversation.

How to connect a headset to a phone or tablet

There is nothing scary or complicated here. As a rule, instructions are included with the headphones. But in any case, everything happens according to the same principle. Turn on the Bluetooth adapter on your smartphone. Now on the headset, find the power button and press it. Hold the button until the indicator flashes blue and red (color may vary depending on model).

If you don't have an indicator light, then simply hold down the power button for about 15-20 seconds. This will enable the discovery feature so that the phone can find and connect to the equipment. Now on your smartphone, go to the Bluetooth settings.

Here you will see a list. Select your headset and click Connect.

How to connect Bluetooth headphones to a computer: Video

Charging the headphone battery

Since Bluetooth headphones require additional power to operate the adapter, as well as to play sound, it is logical to assume that there is a battery inside. Hence another question, how to charge a Bluetooth headset?

It should be noted right away that not every model has the ability to charge. In other words, some headphones work at regular batteries, which cannot be charged. In this case, the interface for connecting charging is simply not provided and you certain moments you need to change the power source.

In addition, there are also options that come with a Docking Station. It also doubles as a charger.

But, such options have a higher cost. For the most part, Hands Free has standard interface to connect charging. It can be of different types. Since nowadays the vast majority of smartphones and tablets use a micro USB connector, it is recommended to choose a headset with the same interface. This will allow you to charge all devices with one power supply.

Listening to music on a wireless headset

Users often ask the question whether it is possible to listen to music through a Bluetooth headset. There really is no definite answer. The fact is that some models support Headset and A2DP functions. These features allow you to listen to music through a wireless headset, but are typically only available on stereo headphones.

If you are using a budget option with one speaker, then in this case you will not be able to listen to music in the usual way. But don’t rush to get upset. You can download and install the “Mono Bluetooth Router” program. The application allows you to use any type of Hands Free to listen to music. This is the answer to the question of how

Make sure that the phone to which you plan to connect a wireless headset is equipped with Bluetooth data technology. If your phone does not have this technology, you will not be able to connect a wireless headset to it. You can check the presence of Bluetooth in your phone by reading its instructions, or by looking at the phone menu.

Turn on your wireless headset. On it, you need to press the multifunction button and hold it until the operating mode indicator turns on. Then you should turn on the phone with which you want to connect the headset and turn on Bluetooth. In the Bluetooth menu, you need to run the search command for compatible devices. The scanning process, depending on the speed of Bluetooth on the phone and headset, can take from several seconds to a minute.

Next, you need to carry out the process of pairing Bluetooth devices. The last step is to start working with the wireless headset. To do this, you need to open the application settings: Tools, then Options, and then Sound Devices. In the Audio Out and Audio In fields, select Bluetooth Audio. In order to start communicating, you need to activate the connection between the headset and the computer. To do this, open the “Bluetooth environment” and double-click on the headset icon.

Some users of older phones encounter difficulties installing the headset. The interface of these devices is far from perfect, but they are reliable, inexpensive and therefore still popular....

I ordered this device to try to use a Bluetooth headset as headphones. But the sound quality is such that it can only be used as a headset. And for listening to audio it is better to buy good headphones.

The headphone headset arrived from China in the usual period of time ~ five weeks. Having unpacked the yellow envelope, I took out a device wrapped in a bubble wrap.

Having unwrapped the bubble wrap, I found the headset packed in a blister.

The following items were inside.

Now let's look at everything separately.
Instructions in Chinese/English.

Actually, the Bluetooth device itself has a power button, a volume rocker and a jack for connecting a charger or a second earphone.

Plastic earhook and a pair of different ear pads.

Bluetooth device charging cord.

A second earphone with a wire that allows you to wrap it around your neck of any size.

The headset was identified as R505 without any problems. Having put on the headset as headphones, I tried to listen to the same composition in it and in my other Fischer Audio Aleph headphones. The difference is of course significant, high frequencies practically none, so unfortunately I can’t recommend using this headset as headphones, and I won’t use it myself.
If only for listening to audiobooks (for which the sound quality is not very important).
The only thing that could be interesting about this headset is the ability to answer a call by voice. incoming call you need to say “Answer” or something similar and the call will be answered. This is what it says on the website, but no matter what I tried to say “Answer” and “Hello” and other sounds, the promised connection did not happen. In general, a stupid little thing that can be Use only as a regular bluetooth headset.
Well, or if you are completely unpretentious to sound quality, then use them as headphones. Finally, the frequencies can be adjusted with an equalizer, but do you need it?