Huawei produces some of the most affordable and popular wireless modems, both landline and mobile. Their various models use cellular and wired telephone networks for transmitting and receiving information. The most convenient and practical version is wireless mobile. It can be used wherever it works cellular. That is, by connecting such a device to a computer, you can access the Internet from almost anywhere. It has a compact size, almost always a USB interface, a low price, a wide selection of payment tariffs, simple management and installation. We will tell you in more detail about the latter - how to connect and configure a Huawei modem.
Find out how to connect and set up Huawei
How to set up a Huawei modem: step-by-step instructions
- Remove the cover from the device and insert a SIM card that supports 4G service into the special slot.
- We insert the device into the USB connector of the computer.
- In the browser that opens, we see a settings window with empty lines into which you should type . Enter the word admin and click on the “Login” button to go to Huawei settings.
- We see a page with several tabs at the top. Select the “Settings” tab and click on the “New Profile” button.
- In the new window, fill in the empty lines: “profile name” and “access point”. “Username” and “Password” are filled in as desired. In the first line we enter any name, for example, Olga17, into the Huawei “access point” APN address: internet.olga17.ru. Save Huawei settings.
- In the next window you need to configure Wi-Fi on Huawei. We see the lines “SSID” and “WPA-PSK Key”. This is the Wi-Fi network name and password. The data for them is located under the cover of the gadget. We drive them in and click “Done”.
- Go to the “Home” tab and check if the “Connected” message appears. If yes, congratulations - you managed to set up Huawei! If not, go through all the steps in the step-by-step instructions again, you may have missed something.
How to set up, view or change the password on a Huawei modem
Huawei ADSL router: how to connect a modem to a computer
In addition to models with USB, Huawei produces ADSL routers for home use. They work with and distribute the Internet in the same way as devices with USB. These routers have proven themselves quite well, but with one important caveat: their antennas for Wi-Fi distribution designed for a small area. That is, roughly speaking, they will transmit the Internet only to the nearest rooms. These routers are not suitable for large apartments, country houses or large offices.
The difference between this router and the USB version is that it needs to be connected to a telephone line. Therefore, you must use the login and password for connecting to the Internet that are specified by the Internet provider in your agreement with him. All other steps are carried out in the same way as described above in the section “How to set up a Huawei modem: step-by-step instructions.”
The Huawei modem setup is complete. Now you know how to enter the router menu, how to configure it according to your requirements and how to connect to Wi-Fi or 4G using it. With our detailed step by step instructions setup is easy and quick, and you can use your new router at home, outside the city and on a trip. We will be glad to receive your feedback on working with Huawei equipment!
There are quite a few reasons why the computer does not see the smartphone. Most often this occurs due to the activation of any other connection mode other than a USB drive. Either this happens due to missing or conflicting drivers. Less commonly, the cause may be various malfunctions in the equipment.
This material provides solutions to the most common problems that arise when connecting mobile device to PC via USB. For convenience, all tips are divided by importance.
The smartphone is not detected as an external drive
Note:The smartphone must be turned on if locked graphic key- needs to be unlocked!
The very first and obvious action is to let the computer understand in what mode the device is connected. If the smartphone simply charges when the cable is connected, it may be connected in charging mode, or as a media player. If you are using an Android device, you must activate developer mode and then enable USB debugging.
For instructions on how to activate developer mode and USB debugging, see this video.
When everything is done, the next time you reconnect, pay attention to the display and notification shade on your smartphone. A notification should appear asking you to select “Enable USB storage.” 
If you are using a smartphone with a different OS, everything is the same. In most cases, in order for the device to be recognized as an external drive, you must select the correct connection type.
One more thing: check if the modem mode is activated on your mobile device. We go to the network settings settings, and if the modem is activated, turn it off.
The computer doesn't respond at all
It is advisable to check the serviceability of components as early as possible to save your own time. If you don’t hear a characteristic signal when connecting, the charge indicator on your smartphone doesn’t blink, the backlight doesn’t activate, or pop-up notifications don’t appear, we try to temporarily change the equipment.
Steps to be taken:
- Check the USB cable for serviceability. We just use a different working cable and that's it.
- We connect to other connectors. For inoperative USB port can only be referenced if no USB peripherals connect to them at all: mice, keyboards, flash drives, etc.
- We try to connect the smartphone via USB to another system unit or laptop. If it works, look for problems with the drivers and operating system on your PC.
Software problems
Let's say the computer responds to the device, but a notification appears on the taskbar that the driver installation failed. This indicates the need to install the “correct” USB drivers on the PC.
Often universal drivers can be downloaded from the manufacturer's website. For example, on the official websites of Samsung and LG there are special sections where you can download a driver that will fit all Samsung and LG models, respectively.
If you have connected many devices from different manufacturers, their drivers may conflict. Try to remove unnecessary ones and install the necessary ones again. Don't forget to restart your PC (you can do your phone at the same time).
If nothing helps at all
In the event that after executionabsolutely everyone recommendations the computer does not see the smartphone, we cannot exclude the fact that the USB connector on the smartphone is faulty. Without special skills and certain equipment, this problem cannot be solved on our own. You must carry your mobile device in service center, or to a workshop where the USB will be resoldered.
You will also like:
How to determine the LTE channel number by frequency
Grandmotherphones 2016: review of current models
Do you want to use the Internet via Wi-Fi on your smartphone and don’t know how to do it? On this page we will describe a method that allows you to connect to the Internet via Wi-Fi on Huawei and similar smartphones and tablets on operating system android. Any experienced Android user can easily find Wi-Fi in the settings and be able to turn on the Internet on their own, so the article is intended for those who have little knowledge of gadgets. The information should be suitable for almost all Android devices.
So that connect internet on android via wifi do the following: Swipe your finger from the top edge of the screen down until the notification panel opens. Find the "Wi Fi" icon. We turn on Wi-Fi by clicking on the icon and then we see a list of available networks. Select the required Wi-Fi access point from the list and connect to it. If Wi-Fi is protected by a password, then you need to enter it in the appropriate field and confirm. Ready! You are now connected to Wi-Fi and can access the Internet from your smartphone or tablet.
Also, when entering a Wi-Fi password, you can check the box to show password and then you will see what password you are entering. If you connect to Wi-Fi, but there is still no Internet on your phone, then most likely the transmitting device does not distribute the Internet. For example, you can make a Wi-Fi hotspot from your smartphone, but if you have not activated the Internet, then another device can find and connect to Wi-Fi, but without Internet access.
This is how you connect to the Internet via wifi on Huawei P10, and possibly on other Androids. If this method turns out to be relevant on your device, then please leave a review and indicate the device model so that others can receive useful information from you.
- I hope the instructions on how to turn on the Internet via Wi-Fi on Android were useful.
- We will be glad if you leave feedback, useful tips or information on the topic.
- Thank you for your responsiveness, mutual assistance and useful advice!!!
24-07-2019
13 o'clock 34 min.
Message:
Uh, darling, there are already different presses on the button and the router has access to the Internet for the device.
24-07-2019
13 o'clock 33 min.
Message:
24-07-2019
13 o'clock 20 minutes.
Message:
Konstantin, Ruslan, if there is no Internet, click on the Wi-Fi icon and hold for a while until you get to the settings, if Wi-Fi is not turned on, turn it on. A list of available Wi-Fi networks will appear, select which one you want to connect to, and an option will appear where you need to enter a password. If even after entering the password and connecting to the Wi-Fi network there is no Internet, then most likely there is no Internet on the router itself; to check, try connecting another phone to the router.
24-07-2019
11 o'clock 21 min.
Message:
Connected to Wi-Fi. but without internet access. Access is allowed on the router. ?
17-06-2019
6 p.m. 31 min.
Message:
It does not ask for a password, it says that it is connected to the network, but there is no Internet access.
19-08-2017
10 p.m. 54 min.
Message:
It is not clear what password you need to enter to connect to the Internet. Inventing it myself didn’t work out that way. Or check with your Wi-Fi network provider. The laptop in the apartment is connected to the network via Rostelecom.
In this manual, we will briefly tell you about the possibilities of connecting a Huawei mobile device to a PC.
To begin, connect your Huawei device to the USB connector; an icon indicating the connection will appear on the notification panel. Next, lower the notification panel on your phone and click on the current connection.
In the list that appears, select the type - HiSuite and wait until Windows installs the drivers on the new device.
After that, go to “Computer” and in the new virtual drive that appears, launch installation file(you can just click on this icon once).
The HiSuite installer will automatically download and install the necessary synchronization components and drivers. This action requires an active Internet connection.
If the HiSuite connection option is not listed, you will need to download and install HiSuite yourself.
After successful installation, you need to disconnect and connect your Huawei device to the computer again, preferably reboot it.
Next, you can synchronize with your PC through the HiSuite utility in windows menu or copy files through Explorer, depending on the connection type selected through the notification panel (HiSuite or MTP).
Smartphones and tablets in the operating room Android system have become an integral mobile device for most of the inhabitants of our planet. It happens that people store a lot on their phones. necessary information, which naturally you don’t want to lose. Fortunately, there are now many ways to save valuable data: photos, music, videos, contacts, and so on. You can resort to creating backup copies or simply transfer the files to your computer, but in the second case, copying contact information and SMS may be a problem for their further recovery.
Another option is to synchronize your smartphone with your PC. And today we will look at exactly this solution option for owners of gadgets from Chinese manufacturer, and all you need is just download HiSuite for Huawei. It is worth noting that this utility can also help owners of devices from other manufacturers, and also has no barrier for Russian-speaking users.
Using HiSuite, you can synchronize contacts and calendar and then edit them, send and receive messages, install and uninstall applications, take screenshots of the smartphone and tablet screen, and manage audio, video and photos. All this can be done under control personal computers on the operating system Windows versions XP, Vista and 7, both 32 (86) and 64 bit. The utility will take up about 500 MB of total hard disk space, and for normal operation you need 1 GB of installed random access memory and a screen resolution of 1024 x 768 pixels.
Let's start installing HiSuite. Your actions:
- You need to download the archive with the program and install it on your computer, preferably running the installer as an administrator. To do this, unpack the archive and click on the file named HiSuiteSetup.exe right click mouse, then select “Run as administrator”. You can download the utility by going to the official website using the link.
- We pick up a smartphone or tablet and turn on debugging mode in the settings. To do this, go to Menu – Settings – Applications – USB Debugging mode
- Launch HiSuite on your computer and connect your smartphone to it via USB cable. Once connected, the HiSuite Daemon application should be automatically installed on your phone or tablet. If this operation did not occur or the mobile device does not synchronize, then look below at possible solutions problems.
Solving smartphone synchronization problems and Huawei tablets from PC:
- Make sure USB debugging mode is enabled in your mobile device settings.
- Manually install HiSuite Daemon by first downloading the application from the manufacturer's official website.
- On your computer, go to Device Manager and remove all unknown devices that are indicated by a yellow exclamation mark. Without leaving the manager, reconnect mobile gadget to the computer and click on the newly discovered device “Driver Update”, then select installation from the specified location or search for drivers on this computer. The path to the driver file is located in the phone’s memory, which appears on the computer as a removable disk, and inside it there will be a drivers folder.
Loading...
