This option will help return the system to the state recorded at a certain point in time - the restore point. If saving such points is configured and enabled, then before installing updates, drivers and applications, the system state will be recorded on HDD.
Returning Windows to a restore point will save all personal files, but drivers and applications that appeared after the point was created will need to be reinstalled.
To start Windows recovery, click right click to “Start” (Win + X) and go to “Control Panel” → “System and Security” → “System” → “System Protection”. Click "Restore" → "Next" and select the desired restore point.
Another path option: “Control Panel” → “All Control Panel Items” → “Recovery” → “Run System Restore”.
If the restore point is not found, it means that system protection is disabled, and you will have to use other methods.
To avoid troubles in the future, enable the creation of restore points. To do this, in the same “System Protection” menu, select system disk, click “Configure” and enable system disk protection.
2. Return the computer to its original state
If there are no restore points or navigating to them does not help, try returning the system to the initial state. You can roll back while saving the files or completely delete everything and . Also, some computers - often laptops - have an option to restore factory settings.
In Windows 8 and 10, you can start restoring to its original state by going to Settings → Update and Security → Reset your PC → Get Started.
In Windows 7, to do this, go to “Control Panel” → “System and Security” → “Backup and Restore” → “Restore” system parameters or computer" → "Advanced recovery methods" → "Return the computer to the factory-specified state."
3. Restore Windows using a disk
A recovery disk is useful, for example, for rolling back to a saved point or returning to its original state if Windows fails. An ordinary flash drive, external hard drive or DVD can serve as such a disk.
The recovery disc should be written in advance and stored in case of system failure. Under Control Panel → All Control Panel Items → Recovery, click Create a recovery disk. In the menu that appears, check the “Back up system files to a recovery disk” option, and you can use the USB drive not only to fix errors and rollback, but also to reinstall Windows.
You can create a recovery DVD in Windows under “Control Panel” → “System and Security” → “Backup and Restore” → “Create a system recovery disc.” The same method works in newer versions of the system, only the name is different: “Backup and Restore (Windows 7)” instead of “Backup and Restore”.
To correct errors, boot the system from disk. In the recovery environment that opens, click Troubleshoot. Start returning to a system restore point in the “Advanced options” → “System Restore” menu.
4. Restore Windows using a full system image
Another option Windows recovery- roll back to the previously created system image. The image is written to a hard drive, DVD, or network share.
Unlike rollback or point-to-point recovery, using full image saves all files, applications, settings and drivers installed at the time of its creation.
The most appropriate moment to create such an image may be when everything is installed on the system and required applications, but there is nothing superfluous. This way you can continue working immediately after recovery.
To create a full system image, in the Control Panel, select Backup and Restore (Windows 7) → Create a system image. (In Windows 7: Control Panel → System and Security → Backup and Restore → Create a system image.)
In the menu that appears, you can choose which of the existing partitions and files to include in the system image and on what media to burn it.
With a complete system image at your disposal, you can quickly return Windows to the state you want. You can start image-based recovery when you restart the computer: “Diagnostics” → “Advanced options” → “System image recovery”.
In the last article we looked at how to make a Windows restore point. Now we will learn how to restore the Windows system from this point. If you have not yet read the previous article, I advise you to do so. We all, sooner or later, install some unknown crap on our computer, and at our own peril and risk. Without thinking about the consequences, we install various programs on our PC in order to test their “wonderful” ability to do something incredible (as we are assured before downloading the program).
RESTORING AND RETURNING WINDOWS 8 TO THE ORIGINAL CONDITION
Before the release of the Windows 8 operating system, returning a computer to its original state was neither easy nor quick. But now, with the help of new features, this can be done in minutes. I can’t even believe it, right? However, this is one of the best Windows features 8.
At work, I have to constantly test various programs, so my computer needs regular maintenance.
WINDOWS 7 SYSTEM RESTORATION
Most often the recovery function working condition computer is required if some program was installed and after that the system began to slow down. You should also restore the system to an earlier state if the computer was subject to a virus attack. In most cases, the computer is infected or littered with programs so much that the recovery operation can only be performed from safe mode.
SYSTEM RESTORE IN WINDOWS 7
Hello, I have already written an article about how to enable system restore and how to create a restore point. Now is the time to write about how to perform a system restore in Windows 7. To put it simply, now I will write about how to perform a system rollback.
If you have some kind of problem with your computer, for example, it has become very glitchy, or even worse, it won’t start at all, then the first thing you need to do is try to perform a system rollback, thereby we will return the settings and system files from backup copy, which was created, for example, two days ago, when the computer was still working normally.
This is a good opportunity to quickly repair your computer and return it to normal operating condition.
WE DO SYSTEM RESTORATION ON ALL VERSIONS OF WINDOWS ORDER A TECHNICIAN BY TEL
You can return your computer settings to WindowsXP using the “System Restore” item. In order to do this thing on your computer, you need to reboot and, pressing the F8 key, wait until the boot menu appears in which you need to select “Safe Mode”, then confirm the computer is running in this mode and follow the path “Press Start - Select programs - click standard - click service ones - and finally we click on system restore.”
INTEGRATION XXI CENTURY
Many manufacturers of computers, laptops and netbooks install hidden sections with an installed operating system and factory parameters (settings), programs and drivers for restoring Windows in the event of a system crash, permanent blue screens death, user deletion (due to inexperience) of necessary system files, incorrect shutdown of services, computer infection with viruses, reinstallation of a new OS, etc.
HOW TO RESTORE WINDOWS 8
To quickly restore Windows 8 using the Reset or Refresh functions. need a recovery sector ( recovery partition) on your hard drive. It is usually present at basic installation. See below for how to check.
If there is no sector, then you will have to use either installation disk, either a recovery disk (disc recovery), or download and create it, or use other functions and methods without a disk.
HOW TO RESTORE YOUR LAPTOP TO FACTORY SETTINGS
Restoring your laptop to factory settings is necessary in many situations. Many problems arise due to Windows crashing or the system being clogged with unnecessary programs.
Almost every laptop (except for completely old models) has a hidden system recovery. Under no circumstances should the folder called “Recovery” be deleted.
It stores important information about your system.
Friends, I have long promised my regular readers to write an article about system recovery. Many of us have already encountered this situation more than once when we install some program, make some operating system settings, accidentally delete service files and do much more, which ultimately leads to incorrect and unstable functioning of the OS.
Will I tell you today? What needs to be done to return the operating system to working condition.
Friends, do not forget that there are no hopeless situations.
The algorithm discussed below will be useful to everyone. There are no people who don’t make mistakes and always do everything right. As wise people say: “Only those who do nothing make no mistakes.” But you should also be able to correct mistakes.
And for everyone who wants to find out and, if necessary, undo the last actions on the computer, I have written a detailed algorithm.
Recovery checkpoint
So, Friends, a recovery checkpoint is a copy of the operating system service files, program settings, as well as the system registry on certain moment time.
The operating system, as a rule, creates recovery checkpoints automatically at certain intervals in case of installing any software or as directed by the user.
It should be noted that when “rolling back” to the operating system restore point, the user’s personal files, such as music tracks, graphic files, documents, etc., are not affected.
Attention! Returning to a restore point allows you to restore the operating system, but not the user's personal content.
1. Click on the “Start” button at the bottom right of the screen and select “Control Panel”. The main Control Panel window of the Windows 7 operating system will open:
2. Click on the very first section “System and Security” and in the window that opens, select the subsection “Restore the computer to a previous state”.
3. In the window that appears, click on the “Run system recovery” button.
4. The system will collect necessary information and launch the System Restore Wizard. In the first window that appears, you just need to click the “Next” button.
5. Next, the second Wizard window will open, where you need to select a restore point from the list provided. If you have just made some settings and want to cancel them, then select the top one the specified entry. You can also select any recovery point entry that suits you.
You can also run “Search for affected programs” by clicking on the corresponding button. The operating system will scan its service records, determine which programs will be deleted or restored during a rollback to a restore point, and present the analysis results in a separate window. After reviewing the lists of affected programs, click the “Close” button.
7. A warning window will appear on the screen that it will be impossible to interrupt the system recovery. And once again they will ask you to confirm your intentions by clicking the “Yes” button.
After this, the system recovery process will begin. Which usually takes a little time - about 2-3 minutes. After which the system will reboot and you will see this window:
Your computer has been restored to the specified state. Now you can check the operation of the OS and other programs to ensure they are working correctly. Be sure to test the result of the system restore.
If the operating system was unable to restore the system, then the window will be different. This often happens when an antivirus program is running. Disable it and try again.
If you were able to successfully solve the “” problem, then I congratulate you. But in some cases, restoring the system did not lead to an improvement in the situation, but rather to its deterioration. The system began to freeze, some programs would not load at all, desktop icons disappeared, etc. In this case, it is best to cancel System Restore.
To do this, we carry out the entire algorithm, starting from point 1. When you complete step 3, the following window will open:
Select “Cancel system restore” and then follow the algorithm presented above.
So, Friends, we looked at a rather important question: “how to restore the system?”, We learned how to “roll back” the system to restore points and cancel “rollbacks”.
It should be noted that it is possible to restore the system using this method, but only if there was no serious damage to system files, for example, as if the system was infected with a virus. In case of serious violations of the OS this remedy is ineffective and you cannot avoid resorting to one of the advanced system recovery methods.
In one of the following articles, I will talk about just such a tool - an emergency recovery disk.
Hello, dear readers of the Internet Business blog! Restoring your computer system may be necessary if you see the following failures:
- the operating system runs at a snail's pace,
- programs freeze
- the menu opens by itself and disappears,
- Windows displays numerous error messages while running,
- The computer makes strange noises from time to time.
There is something to be upset about! If this happens, you will want to return to the time when the computer worked well. Do you think time can't be turned back? Believe me, it's possible! The wonderful tool Windows 7 will act as a time machine System Restore.
How to restore the system? Every day, Windows 7 remembers vital OS settings and saves them, creating a restore point. When serious failures occur on a computer, its normal operation can be returned from a restore point, that is, transported to a prosperous past that was saved by the system.
It is important to know that when you access a recovery point, your documents are not deleted by the recovery system. But programs that were installed after the restore point was created will be lost and will need to be downloaded again. You can cancel System Restore and use another restore point.
How to restore your computer system
Click on the button Start, select All programs. Go to section Standard, open submenu Service, select menu System Recovery s, after which a dialog box will appear.
You can use another way: Start ==> Control Panel ==> Recovery ==> Running System Restore. The same dialog box will open.
2. Select a restore point.
The following commands are available in the computer system recovery program:
Cancel system restore. This command is needed in case you are not satisfied with the result of the restore; it appears only after using the restore point.
Recommended system recovery. Use the suggested restore point, this is the best chance to fix the situation with your computer. As a result, the installed Latest updates, drivers or software, since they could cause failures.
Show other restore points. This command is always available; after selecting it, a list will open from which you can select any recovery point by creation date.
You can test how these settings affect your computer. To do this, click on the button Find affected programs, and you will receive a list of those programs that will be affected by the selected option.
3. Check again that all open files are saved and click on the button Further, then Ready.
After a short pause, the computer will reboot and work normally. Even if there are no crashes on your computer, I advise you to create your own restore point. Give it a descriptive name, for example “Before the doctor was needed” and you can easily find the desired restore point by name.
Creating a restore point
1. In the menu Start click on the folder Computer right click and select command Properties.
A dialog box will open on the screen System, which displays all the most important functions of the computer.
A dialog box will appear Properties of the system.
3. Click on the button Create in the tab System protection.
In the dialog box System protection Enter a name for the new restore point.
Save the restore point by clicking on the button Create. By creating a restore point in advance, you will always be able to choose the state to which it is best to return in the event of a system failure.
If you discover that your computer is infected with viruses, before you disinfect it with an antivirus program, delete all existing restore points. They may contain viruses!
Removing recovery points infected with viruses
In the dialog box Properties of the system you need to click on the disk C (System), then on the button Will set up b.
In the dialog box System protection click on the buttons Delete ==> Continue ==> OK. Close the window and start removing viruses.
After you have disinfected your computer, create a new restore point. Name it accordingly, for example, “After disinfection.”
Restoring your computer system is a simple but very important task. Windows support 7 in working order. When you know the functions of your computer well, it is no secret to you how to restore the system; you do not need to look for a specialist or knowledgeable friends. You can handle this task perfectly on your own!
Good luck and see you on the pages of the Internet Business blog!
I would really appreciate it if you use these buttons! Thank you!“System Restore restores the state of your computer’s system files to a previous point in time. This allows you to undo changes made to your computer system without affecting your personal files.
Sometimes, as a result of installing a program or driver, unexpected changes occur in your computer or unexpected behavior occurs in Windows. Usually, uninstalling the program or driver will fix the problem.
Restoring Windows 7 and 8
In the last article we looked at how to make a Windows restore point. Now we will learn how to restore the Windows system from this point. If you have not yet read the previous article, I advise you to do so.
We all, sooner or later, install some unknown crap on our computer, and at our own peril and risk. Without thinking about the consequences, we install various programs on our PC in order to test their “wonderful” ability to do something incredible (as we are assured before downloading the program).
Restoring and restoring Windows 8 to its original state
Before the release of the Windows 8 operating system, returning a computer to its original state was neither easy nor quick. But now, with the help of new features, this can be done in minutes. I can’t even believe it, right? However, this is one of the best features of Windows 8.
At work, I have to constantly test various programs, so my computer needs regular maintenance.
Windows 7 System Restore
Most often, the function of restoring the computer to a working state is required if some program was installed and after that the system began to slow down. You should also restore the system to an earlier state if the computer was subject to a virus attack. In most cases, the computer is infected or littered with programs so much that the recovery operation can only be performed from safe mode.
System Restore in Windows 7
Hello, I have already written an article about how to enable system restore and how to create a restore point. Now is the time to write about how to perform a system restore in Windows 7. To put it simply, now I will write about how to perform a system rollback.
If you have some kind of problem with your computer, for example, it has become very glitchy, or even worse, it won’t start at all, then the first thing you need to do is to try a system rollback, thereby we will return the settings and system files from the backup that was created for example two days ago, when the computer was still working normally.
Almost every laptop (except for completely old models) has a hidden system recovery. Under no circumstances should the folder called “Recovery” be deleted.
It stores important information about your system.
If you are facing a serious problem with your computer, then the best and easiest way is to restore it to an earlier time. happy time- System Restore. This way you will protect your personal files, even after they are eliminated by a recently modified registry, removing drivers and software that can only cause computer pain.
You may encounter many problems while using the device. If there is a problem with the system, it will not be able to boot successfully and you will not be able to use applications. In this situation return of Windows to an earlier date will help you return it to its previous state. Additionally, there are other reasons that may cause unexpected changes to occur on your computer. You may delete it incorrectly installed program or driver. However, if this does not solve the problem, try restoring your system to an earlier date. A good place to start is to get your computer in proper working condition.
How to restore a device to a specific date?
The first thing you should do is back up your system. Then, when you have to perform a restore, you can use it directly. Other versions have a snap-in that can create copies of the image and restore the last working state of the OS. Open this tool, create a backup and save it to your local or external hard drive. If something goes wrong, you can use it to get your computer back to working order.
However, many users believe that the built-in Windows tool very difficult to use and creates a large backup image of the system. To solve this problem, try running a third-party utility.
Video - System Restore in Windows 7. Creating a restore point
Restore your computer to an earlier date using AOMEI Backupper
AOMEI Backupper - powerful program, which allows you to backup and restore a system, partition, disk, file/folder. In addition, it has many other tools that create bootable media, synchronize two folders, etc. The free version of the program is intended for PC users with Windows 10/8/8.1/7/Vista/XP. So, to restore your system to an earlier date, download AOMEI Backupper Standard.
Step 1. Launch the utility. On the left, click "Restore". Then click on the "Path" button to select the image file for data recovery. Click Next.
Step 2. A window will appear reminding you to restore the system. Click "Yes" and select a time Reserve copy. Click on it and click Next.
Step 3. You will be taken to the Transaction Summary page. Confirm the information if there are no problems, and then click “Start Recovery.”
When the progress reaches 100%, click "Done".
If you only want to restore some drivers and not all, then try downloading the tool Driver Easy. It allows you to select only those components that are needed for backup and recovery, and thus save a ton of storage space for other important files and programs. In addition, Driver Easy can detect and update all necessary drivers for free.
AOMEI Backupper allows you to perform a universal restore that returns the system to a working state from one computer to another. However, this function only exists in paid version AOMEI Backupper Professional, which means you need to update your existing program.
Attention! Selecting recovery increases the likelihood that the process of returning the system to a working state will not be successful. In this case, perform all the steps gradually. To do this, first select a recent restore point and then move on to older ones. Selecting the old backup removes all software and hardware updates installed "in the interim" when they no longer work and require reinstallation after the system restore operation is completed.
Video - How to run System Restore on Windows 10
Using System Restore
Let's assume that you have enabled the function to return the system to a working state (we will discuss how to do this below). To reset the settings to an earlier date, follow these steps:
Step 1. Press Windows icon(or "Windows Search" on Windows 10) in the taskbar and in the search field, type "Recovery". Select the Recovery Control Panel.
Step 2. Click "Run System Restore" and the "Next" button. You will see the restoration dates and times. This may only be one point, but there are usually more. Select the point that you think was created before the PC started. Click Next.
Step 3. To confirm your choice, click “Done”. The system will return the computer to its last working state.
Recovering using Safe Mode
There are cases when, due to the presence serious problems With Windows, you cannot successfully run System Restore. Luckily, you can still do this by booting the OS into safe mode.
| Step | Description | Image |
|---|---|---|
| Step 1 |  |
|
| Step 2 | Once the corresponding dialog box opens, select the "Update and Security" option |  |
| Step 3 |  |
|
| Step 4 |  |
|
| Step 5 |  |
|
| Step 6 |  |
How to enable System Restore
As mentioned earlier, Windows 10 requires the recovery feature to be activated. To avoid the unpleasant surprise of missing restore points when you need them most, follow these steps:
- Enter in the field Windows search 10 “Creating a restore point.” Click on the output and select the recovery option.
- When System Properties opens, select Customize.
- The System Protection window appears. You can see that the restore feature is disabled by default. Click the switch next to “Enable system protection.” You will also see a slider. Move the pointer along the slider by 5%. Then click "Apply" and "OK".
- After confirming the action, you will return to the system properties window. Now you can create your first restore point. Click "Create".
- In the dialog box that opens, create a name for the recovery point.
- From now on, system backups will be created whenever significant changes are made.
Most often the function restoring the computer to working condition required if some program was installed and after that the system began to slow down. You should also restore the system to an earlier state if the computer was exposed to virus attack. In most cases, the computer is infected or trashed programs so much so that the recovery operation can only be performed from safe mode. How to boot your computer into safe mode– when you turn on the computer, press F8 and select “safe mode” in the menu that appears.
So, I will briefly describe the recovery procedure in the operating system Windows 7. Right-click on the “computer” icon (desktop) and go to the last item “properties”.In the window that appears, select.
At this stage we need to make sure that your computer is enabled data recovery on drive C. If the function is enabled, proceed further by clicking on the “Recovery” button.
The System Restore window will appear. Here I recommend selecting “Select a different restore point.”
And here you are already estimating the approximate date when the computer began to slow down. Here, opposite the dates, it will be indicated which programs were installed, which will also greatly help you when choosing operational state of the system. Be sure to check the box "show others" restore points" to display all recorded restore points.
Restoring the system to a working state
The next window is for informational purposes, check the selected date and click on the “Finish” button. Next, we confirm the start of the recovery operation.
We smoke for a few minutes, drink coffee, and don’t touch anything. After the system reboots, you will see a success message. system recovery. If you are still not satisfied with the state of your computer, try rolling back the system to an earlier date. Let me remind you that this action does not affect your files, such as photos, videos, etc. The restore only affects Windows system files, programs, and the registry.
For advanced users, there is a more reliable and interesting option for creating a Windows backup and restoring the system, which requires the ability to work from under the BIOS.
Loading...
