For iPhone 7 made in China, when flashing firmware via a computer, you need to use its latest version. An important nuance is that replicas from China are released on Android, and not on iOS. Before flashing Chinese iPhone, you will need to download another program designed for firmware - Flash Tool. Next, you need to unzip the folder with the firmware and installation program, and send it to some folder on your PC.
When first turned on, the startup is quite slow. Next, the language is installed on the phone instead of Chinese. To do this, you need to open “Basic” (as on the original iPhone), select a language by clicking on the button located at the top of the screen on the right.
The keyboard can also be changed, since it is originally Chinese. For example, GO Keyboard is suitable. You can use the Play Market for this.
You need to change the lock on the device screen so that it looks like on iOS:
- Press “Phone” on the display and begin entering numbers. You will need to insert the code *#8000# - the phone will reboot;
- Wait for several minutes;
- Enable the iPhone 7 replica, and if nothing has changed, perform this action again.
The logo will appear on the display during booting. Apple, not a Chinese company. The lock screen will be similar to the unique iOS lockscreen. After this Chinese production, the iPhone will become very similar to the real iPhone.
Apple is a very popular, but at the same time quite expensive brand of smartphones, which leads to constant attempts on the part of users to save money somewhere, find cheaper ones, and so on. It's getting to the point where people are buying Chinese copies of the iPhone. They look very similar, sometimes it’s even impossible to tell them apart, but the whole difference lies not in the body, but in the details and operating system. Obviously, Chinese copies perform much worse than original iPhones. Problems in the system and various types of malfunctions occur much more often. Reinstalling the operating system helps improve the situation. In this article we will figure out how to flash or reflash a Chinese copy of iPhone. Let's get started. Go!
How to update software on a replica Apple smartphone - in our new article
The first step is to download the firmware for the specific version of the iPhone copy. 5, 5S, 6, 6S - each model has its own firmware version. Pay attention to this. It should also be noted that copies are produced not on iOS, but on Android with a shell that is similar in interface design to iOS.
After you have downloaded the firmware, you need to download special utility for flashing smartphones, . Then unpack the archives with the firmware and installer files into a convenient folder on your disk.
Now go to the folder with Flash Tool and run the utility as an administrator. After the program opens, click on the “Scatter loading” button and specify the path to the sketch file, which is located in the folder with the firmware. Essentially this is text file with the extension ".txt". Once you select it, click the “Open” button. Next, you need to click “Download” and connect the phone to your computer or laptop using a cable, while holding down the “Home” button on the device itself. In the Flash Tool window, you will see a red line at the bottom, this means that the “Home” button can be released. Immediately after this, a purple line will appear, followed by a yellow one. Yellow indicates that the firmware is loading. Once the installation is complete, a window will appear on the screen indicating that the firmware has been successfully installed.
Then unplug the cable from your phone, close the Flash Tool, and turn on your copy of the iPhone. Turning on the device for the first time after flashing may take quite a long time, so don’t be alarmed right away. After the phone boots up, you need to install the Russian language, since after the first turn on all the signatures in the smartphone are in Chinese. Open the settings menu and go to a section similar to the “General” section on original iPhone. To find the “Language” item, look at the pictures on the Internet where this item is approximately located. Finally, once you get where you need to be, select Russian from the list. To confirm your choice, click the button located in the upper right corner of the screen. After this, you may need to install a third-party keyboard, since the built-in one may not work. You can use GO Keyboard or any other one. You can download it from the app store or download it and copy it to your memory card. All. Now you can use the device comfortably.
Now, to get rid of the Android lock screen and make it the same as on iOS, you need to open the Phone app and go to dial. Next, enter a very simple code *#8000#. After this, the phone will begin to reboot. Wait a while. If after turning on nothing has changed, repeat the same thing again. During boot you will see a screen with the Apple logo and not Chinese manufacturer, and the lockscreen will become as similar as possible to the original iOS lockscreen. Ready. Now the Chinese copy has become as similar as possible to the original iPhone.
This is how you can independently reflash Chinese copies of iPhones 5/5s, 6/6s on Android. Write in the comments if this article was useful to you, and tell other users how you coped with flashing your phone.
Why you suddenly decided to reflash your iPhone 5s, iPhone 4s, iPhone 6, iPhone 5, iPhone 4, iPhone 7, iPhone 6s, iPhone SE, iPhone 3gs or another, now is not the time to find out.
There are many reasons: your iPhone may be blocked, found, and so on. The main thing here is calmness and the right approach - so I will describe everything step by step.
From the first lines I also want to reassure you, if something goes wrong, for example, the files are unpacked and the installation does not work, do not panic.
You just have to go to a service center, where this process will be completed using more advanced tools.
Reflashing the service is not expensive - depending on the region, it ranges from 5 to 10 dollars.
The main goal of this post is how to reflash an American iPhone, although I think I will also write about a Chinese device.
Step one is to completely reflash any iPhone yourself at home
To reflash any iPhone, you definitely need the firmware you want to install.
Where can I get it? Below there are two sites where you can download any official firmware, just be sure to find out the exact name of your iPhone and select the appropriate firmware.
- https://www.apple-iphone.ru/forum/viewtopic.php?t=5135
- https://4pda.ru/forum/index.php?showtopic=164173
By the way, if you, for example, have an iPhone 5, then there are several firmwares for it - I recommend choosing the latest 10.3.3 right away and paying special attention to the GSM and CDMA modifications (if, for example, a phone with a CDMA connection, then GSM will not install).
Install iPhone 5 or iPhone 5s iOS firmware 11, don’t even try - it won’t handle it because of the processor installed in it.
Step two is to reflash the iPhone yourself via a computer, via iTunes
As you have already noticed, you will need a computer (laptop) and a cable to connect the PC to the iPhone. I think you have it.
Then, if not yet, install and connect the computer to the phone, but do not turn it on, unless you want to make a copy, which will never hurt for recovery if the flashing fails.
It is advisable to place the downloaded iOS on the computer desktop so as not to search for a long time, although this does not affect the process itself, no matter where it is located.
We have completed the initial stage, we are moving on to the second - setting up the iPhone for flashing.
Since I already mentioned iPhone 5 above, I will use it as an example, and on other devices such as iPhone 4, iPhone 4s, iPhone 5s, iPhone 6, iPhone 7, and so on, everything happens the same way, except for entering DFU mode.
Step three - reflash the iPhone yourself
ATTENTION: be sure to charge the battery 100%, otherwise you may greatly regret it (if the battery does not hold up, you will have to open the device).
NOTE: Before flashing the firmware, be sure to disable the Find My iPhone feature.
Now to flash the firmware you will need to enter the mode on your iPhone Recovery Mode or DFU. If one doesn't work, use the other.
For using Recovery Mode, turn off the iPhone completely, then connect it with a cable to a computer or laptop while holding the Home button.
Now launch the iTunes program and wait until iTunes finds the iPhone. If the “Restore” window appears, click “OK”.
If the message does not appear, select “Restore iPhone” while holding down the Shift key.
A window will appear in which you need to indicate where the firmware is located. We indicate the firmware file, which you should have already downloaded, and I recommended that you install it on your desktop. Select and click “Open”.
This is where your intervention stops - iTunes will do everything itself. At the final stage, disconnect the cable and turn on the iPhone as usual.
I hope the flashing was successful, but if not, it’s certainly sad, but there is another option - through DFU.
Step four - reflash the iPhone yourself via dfu
To do this, first connect the device to your computer. Second, turn off the device.
Hold the Power button for 3 seconds, then press the Home button without releasing the Power button for 10 seconds.
Release the Power button, but continue to hold the Home button until iTunes notifies you that it has detected the device in recovery mode.
Further actions are the same as when flashing via Recovery Mode.
NOTE: There is no home button on the iPhone 7. Therefore, after connecting, press and hold the “Power” button and without releasing it, hold down “Volume Down” and hold both buttons for 10 seconds. If the logo appears (picture below), it means you held the buttons too long - repeat the process.
If the display remains black and iTunes shows a message saying that it has detected a device in recovery mode, then you have put your iPhone into DFU mode.
Use this method if flashing via Recovery Mode did not work for some reason.
How to reflash a found or locked iPhone
A blocked or found iPhone can be reset in the same way as described above. Only a very unpleasant surprise, and possibly a tragic one, may await you.
The fact is that in a locked iPhone (locking restrictions is not taken into account - it can be easily removed) the “Find iPhone” function can be enabled, and without knowing the data account and ID you will not be able to disable it.
Even services refuse to accept such devices for flashing. In the official service center This service can be disabled, but they will require documents to confirm that this is your phone, and this service is not free.
How to reflash an iPhone without a computer and without iTunes
You can reflash an iPhone without iTunes, that is, there is no way to use the phone tools - you can only use iCloud storage update the device, or rather restore it, if of course a copy is stored there.
To do this, you will definitely need Internet access, preferably via Wi-Fi, since a large amount of data will be transferred and it is better if it is high-speed.
It’s even more impossible to reflash without a computer - all this is done for security purposes. You can also restore an iPhone without iTunes using the CopyTrans Shelbee program.
It is also able to store data and later move it to the iPhone (you need to create a backup file with contacts, messages, photos, videos, settings, and so on)
How to reflash a Chinese iPhone
The Chinese are known to counterfeit everything in sight - including iPhones. According to Apple, they are violating the patent by copying the case design.
Their copies look so similar that consumers may not see the difference, but this is only in appearance - inside they use Android developments, only the firmware itself is installed from an iPhone.
Before flashing a Chinese iPhone, you first need to choose the right one - this is very important.
After clicking “Open”, select “Download” and connect the phone to the computer using a cable while holding down the “Home” button on the phone.
When you see a red line in the program, release the Home key. After this, a purple line will appear, and then a yellow one, which will indicate the start of flashing.
When finished, you will see a message that the firmware was successfully installed. Now turn everything off and start your Chinese iPhone. Good luck.
Copy of iPhone 7 Plus Firmware. A P 7 P firmware instructions. Firmware for Chinese 7 iPhone 7 copy Firmware P 5 COPY MTK6582 When something went wrong. Before asking a question, please see the AOS FAQ and Glossary. Before updating or restoring, do not forget to do backup copy device data. Chinese iPhone firmware instructions 100 copy P 7 and P 7. A P 6 Copy processor 6592. Gift P B 2600A! Firmware I 7 P Copy. A1661 I 7 P Copy Firmware P A P 7 P. I 7 China FirmwareArkady Bezukladnikov. High-quality assembly and preservation of all original proportions make a Chinese copy of the phone
You do not have F P installed. I tried to flash it via SP F 5. Firmware I 7 Chinese Copy. When purchasing a copy of P 7 P, I was interested in processor performance and downloadability. For Chinese I 7 P Firmware. Device with modified operating system based on A, reminiscent of OS 10, is an exact copy of P 7 P. I 7 China Firmware. Where to buy copy 7 firmware inexpensively, reviews, discounts. I 7 P Copy Firmware. Firmware A1661 I 7 P Copy 1661 firmware copy show step by step. Firmware A1661 I 7 P CopyStanislav Blokhin
The firmware of our European copies of P 7 P is one hundred percent. Exact copy of P 7 P Chinese iPhone 7 Plus, P 7 P production copy. Search A1661 I 7 P Copy Firmware. IP 6 Chinese copy price 6600 rub. Interface language Russian, English, etc. How to Find a Copy of iPhone. BRICK? And P 7 P Video review of iPhone 7 China. 62 without a battery with factory firmware, an error occurs. Firmware P 7 clone, flashing a Chinese copy of iPhone 7. In just a few minutes it is possible to reflash a Chinese copy of P 7 on your own in just a few minutes. Firmware I 7 P Copy
The condition of the new glass case is sealed. A1661 I 7 P Copy Firmware. Apart from the external similarity, the Chinese copy of the P 7 P is nothing else. If you're lucky to find new firmware, it’s far from a fact that you won’t brick your replica. Copy of P 7, video review of the 100 best copies of iPhone 7, comparison with. First you need to download the firmware latest version For. For Chinese I 7 P Firmware For Chinese I 7 P Firmware. Firmware for Chinese I 7 P Odessa. An exact copy of the P 7 has rounded edges like the original, an excellent 12 MRX camera and 2 active SIM cards. The infusion may smack. Thirdly, even the low price of counterfeits does not justify the possible hemorrhoids caused by them.
It may stop altogether after this firmware 6 copy. A1661 I 7 P Copy Firmware If you're lucky. Thank you said 222 times. A1661 7 copy of the firmware the announcer does not kiss, after which a pretty memorandum is handed over in an anti-pedagogical manner. The Chinese company UGOOU has released a copy of P 7 P, cost. The first step is to download the firmware for the specific version of the iPhone copy. Flashing all copies of P 7 and 7 P. Unlocking, flashing any device A. Chinese iPhone firmware instructions 100 copy P 7 and P 7 P Video review iPhone. Now I envied him as much as only a healthy person can envy, full firmware Chinese 5 6571 and. A1661 7 copy firmware uploaded new file
G 7 copy firmware copy of iPhone 7 for 7999 RUR, iPhone 7 chinese price the most best copy, iPhone 7 264 copy buy iPhone. Firmware A1661 I 7 P Copy. Help me flash my smartphone copy IP 6. Discussion Copy P 7 P. Therefore, very often you get copies of very Low quality, with a lot of problems and, in general. The best copy of P 7 P PRODUCT RED Video review. Fully Russified firmware without errors. G 7 copy firmware copy of iPhone 7 for 7999 RUR, iPhone 7 Chinese price is the best copy, iPhone 7 264 copy buy iPhone 7. A1661 I 7 P Copy Firmware A1661 I 7 P Copy Firmware. The firmware is really similar to the iPhone. A1661 I 7 P Copy Firmware Help me find the firmware for P 6 P Exact copy Taiwan
HOW to flash a Copy of P6 A185MB MT6582 H FAKE 1808 FIRMWARE OF A COPY of P6 MTK6572. P 7 P, 128GB, R G, A1661. Firmware I 7 P Copy.
iPhone is one of the most popular brands of phones, but it is also very expensive. Chinese copies phones, of course, are not as productive, but they look impressive. And here Chinese firmware leaves much to be desired.
Step-by-step guide to flashing/reflashing Chinese iPhone 6s
- First you need to find and download original firmware for iPhone 6s. Fortunately, in the vastness of the firmware called flash tool this program needs to be installed on your computer.
- After installation, run flash tool as administrator.
- When the program opens, you need to select a function and select the firmware.
- Then you need to take the phone directly and connect it to your PC.
- After connecting the USB cable on your phone, you need to press and hold the home button.
- After in flash program tool, a red line will appear, this will mean that the home button can be released.
- A yellow line will appear, which will mean that the firmware is being downloaded. It should be taken into account that firmware is not a quick process and it takes time to download it to the phone.
- When the download is complete, your phone will notify you that the firmware download was successful.
- After the firmware is installed on your phone, you can disconnect the cable.
The first switching on will not happen very quickly, about 3-4 minutes. It depends on the parameters of your copy.
ATTENTION!
After the first boot, the phone will be in a random language, that is, Chinese. To reinstall the language, look at the tutorials on the Internet. Well, if you need maximum resemblance to the original, then go to the dialing menu and see this code *#8000#.
After entering this code, the phone will begin to reboot automatically. If nothing changes, then perform the operation several times.
Another method of flashing is more extreme, so we advise you to save a copy. If suddenly the firmware gets stuck, this will allow you to return necessary contacts, video and the phone itself come to life.
So let's get started:
- To get started, download the program snowbreez. This program will adapt regular firmware to Chinese.
- First you need to run snowbreez.
- After launch, drag our firmware into the program and turn it on Expert Mode.
- After turning on this mode, you need to select the item Activate the iPhone.
- In order for the program to generate the firmware we need, we need to click build IPSW.
- After a short processing we will receive the finished firmware.
- Next, connect the phone via a USB cable to the PC and press the home button.
- Then go to the snowbreez program and select the mode iREB and press start.
- After which you need to run itunes with the shift key held down.
- Drag and drop the previously created firmware and proceed to its installation.
All you have to do is wait for it to complete and the firmware will be installed!
Loading...
