Staining is a complete or partial loss of performance Android device. Not a single user who independently flashes a gadget is immune from turning a smart phone into a meaningless “brick,” so the question of how to perform recovery at home arises quite often on various forums.
Correcting the consequences of unsuccessful firmware
If the smartphone constantly resets when loading or the logo appears on the screen for 5-10 minutes, but the system does not start, then technically it is not yet a “brick”. Such a device can be quickly restored via Recovery menu, reflashing it again.
- Turn off your phone.
- Hold down the Volume Down key and press the Power button to get to the Recovery menu.
You have two options - restore the backup if you made one (this is one of the main requirements for flashing), or re-flash the phone. To start a backup, go to the " Backup and Restore" and start recovery previous state systems.
To flash the firmware, select the “Install zip from sdcard” section and specify required file operating system. This method corrects errors that occur when the firmware is incomplete: for example, when the phone turns off while writing files. 
The opposite situation is that the firmware starts, but you cannot get into Recovery. This problem can be resolved even easier: you can use the TWRP Manager, ROM Installer or ROM Manager applications to return the recovery console. After installation, these applications determine the smartphone model and independently download the required recovery. 
If the listed applications did not cope with the task, find instructions for installing the recovery console for your mobile device model.
Restoring the "brick"
Let's consider a more complex option, when the smartphone actually turns into a “brick” - neither the system nor the Recovery menu starts. It is also possible to restore it at home: for this you need to use official firmware from the manufacturer. Let's look at the recovery procedure using a Samsung phone as an example:
Your “brick” will again become a working device, returning to its original state.
Firmware using Flashtool
This method is suitable for Sony phones, but it can be used on mobile devices from other manufacturers. You will need:
- The “brick” itself that you want to restore.
- Official firmware in FTF format.
- Installed on a computer Flashtool program with firmware drivers.
Before starting work, it is advisable to disable your antivirus and firewall to avoid incorrect operation Flashtool utilities. In addition, when starting to restore the brick, make sure that the phone is fully charged.
The recovery program will prepare the Android firmware and offer to connect the “brick” to the computer. Press the Volume Down key on your device and connect your phone to your computer. 
The Flashtool program must identify the “brick” connected to the computer and run the firmware on it. If the recovery is successful, then at the end of the log you will see the message “Flashing finished”. After this, you can disconnect the phone from the computer and turn it on - Android should start without errors.
In the world today modern technologies Smartphones play a huge role in our lives. It is already difficult to imagine how people did not use telephones several decades ago. Not even modern smartphones, which contain a huge amount useful functions, but simple phones to just call. Of course, you won’t surprise anyone with new devices; they have simply become a necessity.
Once you are completely cloaked, your phone can no longer be recovered by the user in any shape or form. The truth is that many times new modders think that just because the phone seems bricked then all hope is lost. They didn’t shorten the device, but considering this?
What to do if your phone boots right into recovery
Right now, your phone refuses to do anything other than boot directly into whatever other recovery software you choose to use. Keep in mind that how you do this depends on the make and model of your phone. For most devices, this is as simple as holding the volume knob up or down while your phone boots up.
Unfortunately, smartphones can break at any time, not even fall and break, but simply pick up a virus and stop turning on. What to do in this situation? If the phone does not turn on or freezes, then it needs to be reflashed. Let's look at how to flash Android via Recovery.
Troubleshooting. or freezes?
It doesn’t matter whether you have a new device from Samsung or an old phone from a Chinese company, they can start freezing at any moment or stop turning on altogether. Before flashing your device, you should try resetting your smartphone to factory settings. Of course, this can only help if your memory is full or there is a software glitch. How to do it? Go to settings, go to the “Restore and reset” tab (perhaps it is called differently for you) and click on the “Reset to factory settings” button. After this, your smartphone will clear all memory and reboot.
Note. Some devices will automatically boot into the recovery tool, but others will require you to first select recovery from a list of options. Step 2: Login, go to reboot system. Hopefully everything will start working.
What to do if your phone won't stop rebooting
If so, you will be better off. When it finishes transferring, remove the card. Now turn on your phone and boot into recovery. Select this option using the Power button. Step 3: Let it go through the reconciliation process. The problem here may be very simple.
If this does not help you, then you should try installing new firmware. With what it can be connected? As a rule, various phone failures are caused by viruses that cannot be cleaned simple reset settings. Malicious files get into system files, which are not cleared during system recovery. The new firmware contains other files that will not contain viruses. If you do everything correctly, you will get rid of viruses and problems associated with them. First you need to consider how to flash Android via Recovery.
Luckily, if you forget, it really doesn't matter that much. As mentioned earlier, how you do this depends on your device, although quite often you'll just need to hold down the top or top speaker. Go to Advanced.
None of the above solutions work?
This will bring up a new menu with several options. Select this option and follow the instructions. When finished, return to the main menu by selecting Back. Step 6: Finally, reboot your device by selecting system reboot.
Is your hardware actually the problem?
If your phone simply refuses to start or the display is unresponsive, it's possible that the problem has nothing to do with the root procedure or your device's flashing. Instead, it could just be bad timing that has caused your charger to deteriorate badly, or perhaps your display is damaged.What is "Recovery"?
Flashing a phone is quite simple, so don’t immediately run to service center for troubleshooting. This way you can save a considerable amount. Reflashing the device will cost you 500-1000 rubles. How to flash Android from a flash drive using Recovery? Before we look at this, it is necessary to understand what Recovery is. This is software with which you can return your smartphone to factory settings or reinstall the system. It is found in all devices running Android OS. If you haven't installed additional files, then you will have a simple “Recovery”, which is enough to install the firmware. If you want to install converted software, you will have to install custom Recovery.
Checking the battery and charger
None of these things are likely to happen again, but it always helps to be thorough and consider everything possible problems and solutions. Is there a problem that can't seem to be fixed? How do you feel about this process? Unfortunately, it would be impossible to walk you through this step by step without knowing exactly what phone or tablet you're using.
Chances are, your so-called bricked phone can be removed without having to ship and pay top dollar for repairs. Does anyone have any other suggestions for fixing a device that, at first glance, appears to be cloaked? This model already has a successor. Really useful when placing the camera in a hard to reach place.
How to flash Android via Recovery? Menu
Before installing a new one software you need to enter “Recovery”. It resembles the BIOS that is present on regular computer. To find out how to flash Android via Recovery, you need to enter the menu of our software. How to do it? First, turn off our smartphone. To enter the required mode, you need to press the “Volume +” button, the “Home” button and after a few seconds the power button. You may not be able to log in using this method, since there are various combinations for logging into Recovery (the article describes the most common method).
Here's a simple step-by-step tutorial. We are not responsible for failures that occur during the process so as not to carry out appropriate checks. First of all, we need the file, so just download it from the official website. To see the current firmware, go to the menu and at the end, in “Version” you will see it.
The updates have been divided into. That being said, and after checking in your own camera, go to the official website and download the corresponding file. As usual, the firmware used by this model is different from the previous ones. Archived data despite a damaged screen.
What else is needed?
Before you proceed to install the new firmware, you need to scour the Internet and find the appropriate version. As a rule, they are not on official websites, so many users create backup copies, which they subsequently reinstall on their device or post for other users. You can find the firmware on special sites, the most popular is 4pda. Perhaps you are an advanced user and you are already tired of the usual firmware. It is for such people that some changes are made to the standard set. To install the converted firmware, you need to install custom Recovery.
Presumably, each user lowered the smartphone to the ground. Sometimes it ends up with minor scratches, but very often the top of the glass splatters into tiny pieces and the screen is wrapped in the typical "cobweb" look. The device cannot be controlled by touch. In such a situation, how to restore access to your data such as contacts or photos? Exist various ways saving resources from a damaged tablet or smartphone, but each only works under certain circumstances.
After all, it is not always possible to recover data from damaged hardware. Below are some typical situations. Situation 1 - No screen lock. If you don't enable a screen lock, it's usually easy to save data. Launch your smartphone, connect to your computer and copy the necessary resources in Explorer. If you don't know the exact directory structure and you have difficulty finding the data, you can use a program provided by the manufacturer. All of these applications provide the ability Reserve copy data stored in the device's internal memory.
How to flash Android via Recovery? Instructions
You must understand that you are flashing the device at your own peril and risk. If something goes wrong, your phone will not be fixed under warranty. Of course, if you are determined to reflash your smartphone, then you need to find suitable firmware.
The installation process is quite primitive. First, download the appropriate software and move it to the device’s memory or to a memory card. Then go to “Recovery” and select Apply update from external storage. You must confirm your actions for the installation to begin.
In this situation, you cannot directly access your smartphone. Once unlocked, you archive the data as described in the previous paragraph. The specified adapter can be purchased for several tens of zlotys in stores with cellular accessories.
To use this method, the user must first register with the service. If necessary, go to the service page, then enter the email address and password you used to register. Point the device at the damaged screen and turn off the lock. Situation 3 - screen lock is enabled, debugging is enabled.
As soon as the flashing is complete, you need to click on the Wipe button. This will clear all information about the old software.
At the last stage, all you have to do is click on the button. Your device will start booting with the new firmware. That's all. How to flash Android via Recovery? Now you too can answer this question. There is nothing complicated, you just need a little time and care.
Restoring the device's functionality
Although the following tips only work for some models, give it a try. Although this does not require administrator rights, they increase the chances of success. In our tests, the method only worked on rudimentary smartphones. If you do not see the warning that you do not have permission, the action will be successful and you can restart your smartphone. You will likely no longer be locked out, so you will have full access to your data and be able to archive it.
Situation 4 - screen lock is enabled, boot program is available, debugging is disabled. The following tip is for smartphones that have a launcher, for example, which is available on all devices that have alternative software installed. If your copy meets this condition, first start the device in emergency mode.
How to restore old software?
Perhaps you installed a custom version of the firmware and you didn’t like it. How now to return everything to its place? Unfortunately, there is no button that can simply return the old settings. To return to stock firmware, you need to reinstall the software on your device. You download the regular firmware that will fit it and install it through Recovery.
You can use your smartphone's buttons to launch rescue mode. If it has a removable battery, take it out for a moment. Then press the switch, the Home button, and the volume rocker at the same time, holding down the button until the Rescue Mode menu appears on the screen. You will perform other activities on your computer.
As you enter the first or more initial letters, you can scroll through the names of individual subdirectories by pressing the key repeatedly until correct name. This way, you will save yourself the hassle of typing names. Before you start copying, check your smartphone connection. Then you have access to its resources.
Conclusion
How to flash an Android phone using Recovery? As you have already noticed, there is nothing complicated about flashing the device. The main thing is to follow the recommendations. Within an hour you will receive an updated phone that will work perfectly.
Currently, many users know how to flash smartphones. With this operation, you can not only get rid of slowdowns and glitches in the operation of the device, but also increase its performance, add some functions and even change the design. But only some users know that wrong actions can “kill” the phone.
Otherwise, try starting your smartphone in rescue mode again. It is highly recommended to copy all files from your smartphone to your computer. Although the operation may take a little longer, you can analyze all the data later. An example command might look like this. The second parameter specifies the target location of the copy.
Please note that copying may take some time. To make it easier to find specific content, we've included the path to the most important data types in the table. This program is called only after starting the smartphone in rescue mode. The application offers various archiving options. Summary. The basis is regular archiving.
Very often, after flashing the firmware, the phone does not turn on and simply turns into stone. In this article, we will look at the reasons why this problem occurs and how to get the device working again.
Reasons why the phone may not turn on after flashing the firmware
After restoring the smartphone, you need to reset the Android system settings. In this way, you can eliminate problems that arise and return the original version of the program. To do this you need to do the following:
- transfer important photos, contacts and documents to a computer or disk,
- open Android settings,
- go to the “Backup and Reset” tab,
- start the reset process.
After all these steps, all errors will be corrected, and the system will be restored to its factory state.
Let's figure out how to flash Android through a computer/laptop if it doesn't want to turn on. In this case, we mean a phone and tablet running Android OS.
This article is suitable for all brands that produce phones on Android 10/9/8/7: Samsung, HTC, Lenovo, LG, Sony, ZTE, Huawei, Meizu, Fly, Alcatel, Xiaomi, Nokia and others. We are not responsible for your actions.
Attention! You can ask your question to a specialist at the end of the article.
System malfunctions can be so serious that resetting the settings does not fix them. If you are faced with such a situation, then it will be useful to know how to reflash Android to return the phone to working condition.
Bootloader check
The first thing you need to do before flashing Android is to make sure that the problem is of a software nature. Click Power button: if the phone shows at least some signs of life (clicks, the logo lights up, the robot freezes, Exclamation point), then the bootloader is OK. This means you can flash your smartphone, and it will continue to work.
Even if nothing happens when you press the power button, it’s too early to panic. Connect the device to your computer via USB and press the power button or the combination of “Power” and volume down keys.
If the computer sees the connected phone, it means it can be flashed - the main thing is to know how to do it yourself. If your smartphone does not show any signs of life, take it to a service center. The device probably does not turn on due to hardware problems, the elimination of which requires the intervention of a competent specialist.
Android firmware via computer
If the system is so damaged that it won’t turn on, you will have to reinstall it - in other words, flash the phone through the computer. If the manufacturer has provided for this possibility and developed special software, then there will be no problems.
For example, owners of LG smartphones are lucky: the LG Mobile Support Tool program, which can be downloaded from the equipment manufacturer’s website, will do everything for them.
- Install and launch LG Mobile Support Tool.
- Install the phone drivers in the “Install USB Driver” section.
- Connect your smartphone via USB. Press the power button or the combination “Power + Vol-”. The device should appear in the program window.
Increase Open the section " Additional features" and click "Recover from update error". The application will do the rest of the work on its own, eliminating problems that prevent Android from working. There is a similar program for Sony Xperia- PC Companion.
Increase If there is no official application for flashing or restoring the system, you can use software from third-party developers. Each brand has its own program:
- LG - KDZ Updater.
- Samsung - Odin.
- HTC - Android SDK Platform Tools.
- Lenovo - SP Flash Tool.
The listed programs work on the same principle. You connect your phone via USB, download the firmware file for specific model smartphone and install it through the application. After successful installation, Android starts again and works without errors.
Android firmware via Recovery Menu
If a custom Recovery (for example, TWRP or Clockwork Mod) was installed on your phone before problems with the system appeared, then you can flash the device without programs on your computer. However, you will need the computer itself to download the firmware and transfer it to the memory card.
- Find the firmware for your phone model and download it to your computer.
- Place the file on a memory card and install it in your smartphone. If your smartphone does not support microSD, this method will not work.
- Launch Recovery Menu. The combination “Power” + “Vol+” is usually used.
- Clean your phone from damaged files by selecting “wipe data/factory reset”.
- Click "install zip from sdcard".
- Select the firmware file placed on the memory card and confirm the installation.
Increase After installation is complete, click “Reboot system now” to complete the installation and apply the configuration. After rebooting, Android should start without problems.
Not many users imagine what phone firmware is until they encounter problems such as decreased performance, bugs, frequent freezing, and unauthorized shutdown of the device for no apparent reason. Firmware provides a unique opportunity to eliminate factory defects on a newly purchased smartphone. It also helps to modify and modify the gadget’s software according to the tastes and needs of a particular user.
As a result, reflashing literally gives new life Android gadget, allowing you to eliminate many common problems associated with its long-term operation. Thanks to this procedure, cellular telephone shows high performance for several more years.
Update and new life of the Android system
Phone firmware: what is it?
In a nutshell, for the uninitiated user, firmware is a complete update of the non-volatile memory of a digital device, that is, something like replacing the built-in software.
The operating system that the phone runs on is the holy of holies of any digital device model. Full performance and expansion of all available functionality depend on the optimal configuration of the system.
By firmware we mean a complete set of all software settings, this is both the process of uploading a new software shell to the device, and a file image that includes the entire “flash” memory of the phone.
Firmware adds security to a digital device
Customize your smartphone, that is, update it operating system, expand the functionality and add everything modern devices you can do it yourself using a computer. Firmware installed at home according to all the rules does not cause further malfunctions in the operation of mobile devices.
Important! Within one line, you can improve some options in the phone, for example, improve image brightness, add resources battery, . But you shouldn’t naively expect that an old device will transform into a new generation phone.
Why do you need to flash a digital phone?
Partial or complete software updates are usually carried out for three reasons:
- The need for Russification of digital devices. These are models imported from abroad that have an interface in a foreign language and are completely devoid of Russian language support.
- In case of replacement of outdated software with more advanced new version. Digital devices are flashed in order to “enrich” the phone with improved, trendy features that were not originally provided by the manufacturers.
- Due to serious damage to shell smartphone. This can be either partial inoperability of individual built-in functions or a complete failure to start the system.
What do you need to flash your phone yourself?
A user who does not have initial skills and knowledge of the principles of operation of the software, and has little understanding of computer programs– you shouldn’t take risks, but it’s better to entrust your digital gadget to a specialist.
Flashing represents only a small part of what is loaded into the memory of a digital device. If you decide to do the firmware yourself, then first of all you should familiarize yourself with components this process, and familiarize yourself with the terminology.
The main parts of the firmware consist of two elements:
- Fullflash is a complex of all software utilities built into the device, that is full image memory.
- Monsterpack (monsterpack) is a software “fill” from the manufacturer. It is a complete set of all programs and consists of three parts: a program image of the device (firmware), FlexMemory (flex) and EEPROM.
These above components must be replaced, both individually and collectively. However, for the uninitiated user the question will be: where to get source codes manufacturer to completely update these parts?
It is practically impossible for the average Internet user to find original codes, and self-made codes can easily turn a smartphone into a “brick.” Based on this, it is recommended to limit yourself to replacing only the firmware, or entrust the digital device to specialists.
Tools for Android updates on your gadget
What tools will you need:
- Directly the smartphone itself.
- Computer or laptop.
- Special USB cable.
- Required drivers.
- Suitable firmware version.
Saving the installed firmware version
Before installing the firmware mobile phone, try to save all data (settings and programs) using a special backup application to a memory card or computer. A backup copy of the existing version may be needed if, not necessarily of course, but something goes wrong or new firmware will degrade the performance of the device.
- Launch ClockworkMod Recovery and go to the “Save current ROM” tab.
- Click “ok”, thereby starting the creation of a data backup.
Backup button for backing up files
- Restoring the saved version is started by opening the same CWM Recovery option, then launching the “Restore” function.
Preparing the smartphone for the firmware procedure
Firmware for various model range smartphones will require “uploading” of suitable software. Therefore, it is recommended to study all the intricacies of the firmware for your phone model. There are many special resources on the Internet, for example, 4pda, where you can find suitable software, a program for installing firmware, drivers, as well as instructions for the process itself.
Important! Before starting the firmware, you should disable antivirus program on a digital device, otherwise it will not allow the new software to launch.
The preparatory process takes about half an hour, complete the following steps:
- Download and install the “MobileuncleMTC Tools” application, if Google help Play.
Steps to install the application
- Install the program with administrator rights.
- Download the “CWM – recovery” file suitable for flashing the firmware of a specific smartphone model.
Submenu of built-in options in ClockworkMod Recovery
- Transfer to smartphone CD-card ZIP folder with downloaded files (firmware, recovery).
- Open the main menu of the installed Mobileuncle utility, find the Recovery file.
- Start the update by simply clicking “ok”.
The main program window, and the option “replacement recovery via update from sdcard”
The procedure for self-firmware Android via computer
After carrying out the preparatory steps, the Android device is completely ready for the most important procedure. The recommendations below will familiarize users with how to properly flash Android on their own via a computer and avoid mistakes. Recommended procedure:
- Check your phone's charge, it should be at least 50%. Flashing smartphones from different manufacturers differs in the time spent. So the procedure for flashing a Chinese model will take much less time, unlike its European counterparts.
- Connect your smartphone via USB port to the computer, wait for it to be detected.
- Open ClockworkMod Recovery.
- Select and click on “Wipe” in the menu. This option will reset all data from the device.
- Then select “Wipe cache partition” and click.
Recovery main menu and the “wipe cash partition” option, responsible for erasing all temporary accumulated files
- After agreeing and confirming, click on the “Install form scard” item, after which the “Choose Zip from internals sdcard” option will open. Click on the pre-loaded flashing file image.
- Wait until the installation process is completely loaded and reboot the device. Throughout the entire process, it is strongly recommended not to disconnect the connecting USB cable.
Alternatively, after reinstalling the software, your smartphone will not want to turn on the first time. Don't worry, try rebooting it again. If no changes appear, it is recommended to reflash it again, or restore the old saved version.
For those who would rather see once than hear a hundred times, it is recommended to watch the video from detailed instructions about Android firmware:
Smartphone firmware provides users with opportunities that are difficult to overestimate. This is an effective increase in the performance of almost all the functionality of your favorite gadget. However, if you decide to do this procedure yourself, you should take into account that the process is quite risky.
Nowadays, you can update or change the firmware of your device without contacting specialized centers. In essence, you are just wasting your money and time. How to reflash a phone yourself? We will give specific answers to this question in our article.
Features when flashing
Now we will list several important elements that are necessary to flash your cell phone.
- First, make sure that the battery is charged at 50 percent or higher (the best option is a full charge), since the flashing process can be quite lengthy.
- If you are afraid of losing important data contained on your cell phone, then make backup copies of the files and information you need.
- To flash the firmware, you will need a standard USB cable that comes with your phone.
- Your PC must have the appropriate software to flash your phone. You can find all drivers on the official websites of manufacturers or in numerous alternative sources. There are pirated and licensed versions of the software, which differ significantly in their functionality. It should be noted that official ones are not always better than pirated ones. After successful installation, you need to reboot your smartphone.
- Your device must have a clean ESN, that is, not be in the stolen or lost database.
- Next, you need to find out (for some models) MEID and ESN, where the first consists of 18 (starting with 2) or 15 digits, and the last - of 8.
- Nowadays there are 3 types of firmware: from a ZIP archive, a TAR archive, or a three-file one. Below we will talk in more detail about each of them.
Are you still wondering how to reflash your phone? Believe me, it's not difficult at all. A little later you will see for yourself.
Firmware: “Android” from ZIP archive
This is one of best methods, used by many users. So, how to reflash an Android phone from a ZIP archive? First, you need to install root rights. It is worth noting that not all devices have this feature. Plus, once you achieve root rights, you will immediately lose the warranty on the device. Secondly, you need to make a backup, that is, a backup copy of important files. What is needed for this? You can, for example, set special program for system recovery, of which ClockWorkMod is an excellent example. It is designed for flashing phones on the Android OS, and in case of any failures, it allows you to return to the source code. To make a backup using the above program, you need to take the following steps:
- Launch ClockWorkMod Recovery.
- Select "Backup & restore".
- Next is “backup”.
- Confirm by pressing the “YES” button.
- Reboot your device by clicking “Reboot system now”.
After completing these steps, a backup should appear on your MicroSD in the “clockworkmod/backup” folder. After completing all the above operations, you can proceed directly to flashing. So, how to reflash an Android phone from a ZIP archive?
- Once the ROM file has downloaded, write it to the memory card. The firmware name may contain Latin letters and numbers, and the file itself must be in a ZIP archive.
- Disconnect your phone from your PC and charger.
- Next, turn off the mobile phone and start recovery mode.
- In the menu we find the “Wipe” item, which erases the current system information.
- Then you need to return to the root menu and select “Flash Zip from SD-Card” or “Install zip from sdcard”.
- We find the ROM firmware located in the ZIP archive.
- We confirm the firmware and follow the instructions on the screen.
- If everything went well and without errors, reboot the phone by selecting “Reboot system now”.
We are done with the first method. Now let's move on to the 3-file firmware.
How to reflash Android with three-file firmware
For this method, we will need the Mobile Odin Pro application, which is another program for Android firmware. If you decide to flash the firmware using this method, you don’t have to obtain root rights. How to reflash a phone with 3-file firmware? Let's move on to the algorithm of actions:
- First, you need to write files to your smartphone or tablet (3 files with the words CSC, CODE, Modem in their names). It is advisable to put all 3 files in one folder.
- In the Mobile Odin Pro application, select “Open file”.
- Next, a window should appear where you need to select a file with the word “CODE” in the name. Click "OK".
- Then select “Modem” and press the “OK” button.
- We check that all sections contain data.
- After the check is completed, click “Flash Firmware”.
- We are waiting for the firmware process to finish, which can last over 15 minutes.
Finally, let's move on to the last method firmware.
How to flash Android from a TAR archive
Not the most popular method, since there are very few firmwares that are packaged in a .TAR archive. Generally speaking, most of the process is the same as the previous method. How to reflash a phone from a TAR archive?
- In Mobile Odin Pro, select "Open file".
- In the window, find and select the downloaded firmware in .tar or .tar.md5 format, which was previously recorded in the “Firmware” folder. Click "OK".
- Then we check that all sections have the necessary data.
- Next, click “Flash Firmware”.
- We wait for the installation to complete and reboot the device.
I would like to say a few words about the firmware of Chinese phones. Such devices are updated in exactly the same way, but there are a number of nuances. Firstly, finding high-quality firmware is very difficult, and for some gadgets it is completely impossible. Secondly, various fakes (like iPhone, Galaxy S4 and others) are unreliable, which is why custom firmware can cause irreparable harm to the device. That's all, we hope that our instructions answered your question on how to reflash a Chinese phone and original devices in order to update an already boring system. However, remember that flashing Android is an operation at your own peril and risk, which may not have very rosy consequences.
How to reflash a Samsung phone
In this section we will describe flashing using the MultiLoader application. After downloading it, you need to launch it and select “BRCM2133”. Then follow these instructions:
- Go to the “Download” mode by holding down the power (lock) and volume keys. If the message “Download” appears on the screen, it means that everything was successful.
- We connect the phone to the PC using a USB cable. After detecting the device, click the “Download” button and wait a couple of minutes.
- Disconnect USB and reboot the smartphone. If the mobile phone starts on English language, then we do a simple “Pre-configuration” by typing “*#6984125*#” → “Pre-configuration”, after which we enter the password “*#73561*#”. Select your country of residence and reboot. Next, enter “*2767*3855#” in the window, which will help reset the settings.
- All is ready. The system has been updated. We think you understand how to reflash a Samsung phone.
Nokia firmware
New models support the firmware function “over the air”, that is, without connecting to a PC. All you need is high-speed Internet. So, how to reflash a Nokia phone? First of all, go to the “Settings” => “Phone” => “Phone Management” => “Device Update” section. You will be presented with all important information about the phone model and firmware version. Select “Functions” => “Check for updates”. If more than latest versions Software, you will be informed about this and offered to update old firmware. Everything is done automatically.
If you want to update the system via your computer using a USB cable, simply download the Nokia Software Updater application and run it. Then follow the instructions that will appear on the screen of your smartphone.
How to reflash an HTC phone
First you need to download the firmware itself. In addition, it is important to obtain root rights and make a backup using the method we described earlier. Backup can also be created using the Titanium Backup application. Let's get started with the process:
- First we do a full “wipe”. We have already told you how to do this.
- Next, select “install zip from sd-card” in recovery.
- Then you need to enable or disable signature verification “toggle verification mode”.
- We find our firmware and launch it. We wait for the update to complete and reboot. At the end, “Installation completed” should be displayed.
As you can see, the firmware for phones of this model largely coincides with the method of flashing firmware from a ZIP archive that we described earlier.
Firmware Sony Xperia
To flash the firmware we will need the Flashtool program and a USB cable. Let's start the process. So, how to reflash Sony phone Xperia?
- First, we download the required firmware, which will be in .ftf format.
- Place this file in the /flashtool/firmwares folder.
- Then you need to launch the FlashTool utility, turn off the phone and wait 30-60 seconds. Next, click on the button in the application where the lightning is drawn and select “Flashmode”.
- A little later you will receive a message stating that the firmware is ready for installation and you need to connect the device.
- We hold down the key responsible for lowering the volume, after which the Flashtool program identifies your device.
- We wait for the end of the firmware until the message “Flashing finished” appears. Reboot the device and enjoy the updated software.
Let's move on to last phone number, for which we will describe the firmware process.
Fly firmware
So, how to reflash Fly phone? Follow the algorithm:
- We connect the phone (turned off) to the PC using a USB cable.
- Download, install and launch the same FlashTool.
- Go to the “Download” section, where we indicate the COM port and speed (we do not recommend setting it higher than 460800).
- Specify the downloader (“Download Agent”).
- We load the memory distribution scheme of your smartphone (“Scatter-loading”) and then check the lines with the areas of the device’s flash memory that are subject to programming.
- Click “Format FAT”, where we select “Manual Fat Format”. In “Begin address” and “Format Length” in hexadecimal format you must specify the starting address (0x0), as well as the size of the smartphone memory that needs to be cleared. Be careful as calibration data may be deleted inadvertently.
- Click “Ok”, then press the device’s power button.
- To start the firmware process, you must click the “Download” button.
- After the update is completed, disconnect the phone from the USB cable and reboot it (several times if necessary).
As you can see, everything is quite simple.
Finally
Many users of phones running Android OS sooner or later wonder about changing the firmware, since the original one becomes outdated, which affects the overall performance of the phone. At the same time, system interruptions very often occur, which is especially important for Chinese phones. However, for various reasons, not everyone wants to go to a service center, preferring to reflash their smartphone themselves. In this article we have given many illustrative examples. this process. We think you found it interesting.
Loading...
