DS4Windows is an application that allows you to fully unlock the functionality wireless gamepad DualShock 4 when connected to a computer. If you are one of those people who use a Playstation 4 controller to play PC games, then this program you just need it. It will be especially useful for those who are running Windows 7 or earlier versions of the operating system from Microsoft.

Possibilities

DS4Windows is a portable tool that allows you to simultaneously work with several controllers connected via microUSB cable or Bluetooth adapter. Like many other solutions of this kind, this program is a kind of emulator that “disguises” the DualShock 4 as standard controller Xbox 360 (supports most Windows games by default). U this method there is one serious drawback. It consists in the fact that in games you will still see standard icons from Xbox. For example, instead of the usual (for a Sony console) circle, square and triangle, you will be asked to press the letters A, B, X, and so on.

But, even despite this unpleasant moment, using DS4Windows is still very convenient. The application allows you to change the assignment of keys on the gamepad, control the sensitivity of the sticks, configure the backlight settings, built-in microphone, audio output, and so on. If necessary, all selected settings can be saved in separate profiles. To switch between created profiles while playing, just swipe left and right with two fingers on the touchpad.

Setup instructions

In order to start using DS4Windows, just run the executable file from the downloaded archive. Next, in the pop-up window, click on the key responsible for installing the driver for connecting the DualShock 4 controller. If you are using Windows version below the “eight”, you will need to additionally install software for the Xbox controller (the key for this is located a little lower). Once the driver installation is complete, it is recommended to reboot the system. Also note that DS4Windows is required to run. NET Framework 4.5 or higher.

Key Features

• using DualShock 4 for PC games;
• customizing keys, sticks, backlight, touchpad and microphone;
• support for settings profiles;
• user-friendly interface, fully translated into Russian;
• work in portable mode, without the need for installation on a computer;
• easy initial setup.

Some PC players will scoff at the idea of ​​using a controller rather than the usual keyboard and mouse, but some projects gain a lot from this configuration.

There's no need to look for a gamepad if you have a DualShock 4 from PlayStation 4. It's a great choice: the layout and composition of the buttons are suitable for most PC-designed projects, and the trackpad can even be used as a mouse.

The only downside is that audio output is not yet supported, so you need to connect to a PC to play with headphones.

In order to play with DualShock 4, you don't need a PS4 - just the gamepad itself, a PC with Windows and microUSB. If previously you had to use special software to play with DualShock 4 on a PC, now Sony has simplified the connection method even more.

You can connect the gamepad via Bluetooth. Requires a Bluetooth enabled PC (available on most modern PCs). In addition, there is a wireless adapter that works using the USB input.

How to connect DualShock 4 to Steam

On the gaming Steam platform Recently an update was released that allows you to play with DualShock 4 on PC while playing on the service.

Although gamepad support is in beta, you can still use the controller on PC and play games on it. Big Picture mode supports the use of a gamepad, and in games the button symbols corresponding to the PlayStation symbols appear.

To play DualShock 4 on Steam, launch the application, download the latest update and connect your DualShock 4 via wire or Bluetooth.

For those who don't play on Steam, below is another way to use a gamepad.

How to connect a PS4 controller to PC

1. Download DS4Windows

You will need additional software to fully support the controller on your PC. The application is known as DS4Windows, and it allows you to quickly set up a Sony gamepad. The program tricks the computer into believing that the DualShock 4 is an Xbox 360 gamepad that is natively supported on Windows. To find a program on the Internet, enter the name in any search engine - Google or Yandex.

2. Install DS4Windows

Open the downloaded file (it will be called DS4Windows.zip), click right click and select the "Extract all..." option. Choose where to extract the files - to the same folder where the archive is contained, or somewhere else.

You will have two files. DS4UPDATER.EXE is a program for installing the latest drivers for DS4Windows. The second file, DS4WINDOWS.EXE, begins the installation of an application that will allow you to play on a PC with DualShock 4.

3. Set up DS4Windows

When you launch DS4Windows for the first time, you must determine which folder to save the properties in - we recommend choosing the default destination.

A new window will open. Select "Install the DS4 Driver" to enable the game on DualShock 4 in Windows 8, 8.1 and 10.

Attention Windows 7 owners - you will also need to install the driver for the Xbox 360 controller.

4. How to connect PS4 controller to PC via USB

After completing the above steps, you can play with DualShock 4 on PC. There are two ways - wired or wireless. For the first method, a regular MicroUSB cable is suitable - it comes with all modern smartphones (but not Apple).

By connecting one end of the wire to the DualShock and the other to the PC, you will allow Windows access to the device.

5. How to connect PS4 controller to PC via Bluetooth

DualShock 4 is convenient in that it allows you to play wirelessly. The Sony controller uses Bluetooth to transmit data, so your computer must have a corresponding receiver. If you don't have one, you can buy a special Bluetooth adapter that runs from USB. They are inexpensive and can be found in almost any hardware market.

To connect the controller via Bluetooth, hold down the PS and SHARE buttons for three seconds. The LED strip at the top of the controller will blink rapidly.

Now go to Bluetooth properties on your PC. Windows 10 owners should click on the speech cloud icon in the taskbar area. The Action Center will appear - click on Bluetooth, and then “Wireless Controller”.

You may be required to enter a password - dial 0000. After all the steps, the DualShock 4 will connect to the PC wirelessly.

In the PiterPlay store you can choose for every taste.

On the Internet in Lately There is a lot of information about PS4 hacking, but often these messages are “duck”.However, there is one way to play games for free on your console. Let’s say right away that this is quite difficult to do, and our article is more of an informational nature. From this text you will learn whether it is worth flashing your PS4 and how the firmware works.

Overall, the DualShock 4 controller is very well built and there is rarely a need to repair it. If you need to change appearance gamepad or change the part inside, then in this article we will tell you in detail how to disassemble the DualShock 4 controller.

Recently, complaints about the inability to connect to PSN began to appear online. For some, the network works intermittently, others cannot connect to the Sony server at all, while the status shows that all services are working normally. In all likelihood, the problem lies in the recent attempt by Roskomnadzor to block the Telegram messenger. In this article we will talk about how to bypass PSN blocking, and also indicate the reason why PSN does not work for some players.

Important: The article below talks about connecting a Dualshock 4 gamepad to a Mac and what games are compatible with it. If you are looking for instructions for remotely playing Playstation 4 on a Mac (MacBook), here you go.

Crazy demand for Playstation 4 in Russia led to a sharp increase in the cost of the console at all major retailers in the country. There was no choice: Xbox One They don’t sell it here yet, but Wii U in most cases it is not quoted at all. No one was even bothered by the fact that there was nothing to play on PS4 except a couple of projects.

If you've already passed Killzone: Shadow Fall and tried Knack, your set-top box is most likely gathering dust next to your TV. And in vain. Her gamepad Dualshock 4, is capable of much. By following our instructions, you can connect it even to Mac– with or without a wire – and control emulators of old consoles and favorite toys without restrictions: from Deus Ex: Human Revolution And Tomb Raider before Super Mario Bros. And Sonic 3.

Advantages of Dualshock 4 over the Xbox 360 gamepad

Fact: developers computer games focus on the controller for Xbox 360. Until recently, this was the undisputed standard. There are wired and wireless models for Windows computers on sale, the cost of which ranges from 1800 before 2800 rubles depending on the store, year of manufacture, model, color, and so on. By choosing this gamepad instead Dualshock 4, your savings will be no more than 500 rubles. However, you will not be able to use it with a Mac without installing it additional programs, and the wireless version will require the use of a proprietary wired signal transmitter. It's ugly and not at all portable due to the long cable and oval external module.

On this background, Dualshock 4 looks better: he can connect to Mac and Windows directly via Bluetooth, not to mention a regular Micro-USB cable. No transmitters are needed. With the help of two simple programs, any Windows user can force the system to recognize a Sony gamepad as the same gamepad from Microsoft. Thus, absolutely all buttons will work in all games - without any additional settings. It will even work Touchpad and both vibration motors! Most importantly, Mac owners are also lucky: the controller works in OpenEmu – best emulator old consoles - as well as in two dozen ported games from Windows, including Deus Ex: Human Revolution And Tomb Raider. But the advantages of Dualshock 4 are not in compatibility, but in quality.

According to the conclusion of most gaming publications, the new gamepad from Sony is the best gamepad in the world, against the background of which previous version, Dualshock 3 For Playstation 3, looks like a plastic craft. Even the gamepad was left out Xbox One And Xbox 360. From personal impressions, the laudatory odes to the new “dual shock” are one hundred percent justified: it fits in your hands like a glove, feels like premium product and looks like a solid gadget. Whatever you say, this is the “next gene” in the peripheral sphere. And therefore I don’t see any point in purchasing an analogue from Microsoft, the ergonomics of which are ten years behind.

Price, where to buy and what to buy

You don't need to own the console itself to use its controller. With a high degree of probability, there is a packaged gamepad in the nearest electronics hypermarket Dualshock 4– exactly the same as what comes with Playstation 4. Its suggested retail price is 2690 rubles.

Additionally, you only need a Micro-USB cable, which is not included in the gamepad package. But, most likely, you already have one, left over from some mobile phone or accessory.

Connecting Dualshock 4 to Mac

Regardless of the method, the gamepad will work flawlessly. The delay when entering commands via a wireless channel, Bluetooth, is unnoticeable even in intensive, modern games.

How to connect Dualshock 4 to Mac via Bluetooth

Open search Spotlight(magnifying glass in the upper right corner of the screen) and enter: Bluetooth. From the results, find and select System Settings– Bluetooth.

Pick up the Dualshock 4 and press the keys at the same time Playstation And Share. Hold them until the indicator light starts flashing regularly. Immediately after this, a new device with a random name should appear in the Bluetooth menu on the Mac. Select it and click "To plug".

If everything went correctly, the Dualshock 4 indicator light will stop blinking and turn bright blue. This completes the initial connection process. Now every time you press the button Playstation, the controller will automatically connect to the Mac.

Important detail. Dualshock 4 discharges through 7-8 hours wireless operation , so regularly leave it connected to any USB charger or USB port on your computer. Average charging time is 2-3 hours.

How to connect Dualshock 4 to Mac via USB cable

Plug the Micro-USB cable into the controller, then into the computer. All. The yellow indicator will light up, indicating that the built-in battery is charging. While it is running, the gamepad continues to charge. Naturally, you can continue to use it.

What to play on Mac with Dualshock 4?

Is the controller connected? It's time to play. If you love retro, you're in luck. Dualshock 4 support is built into the free, most accessible and intuitive set of emulators for game consoles of the past.

Officially supported platforms - and game images for them - include:

• Game Boy
• Game Boy Advance
• Game Gear
• NeoGeo Pocket
• Nintendo (NES)/"Dendy"
• Nintendo DS
• Sega Master System
• Sega Mega Drive (Genesis)
• Sega Mega Drive 32X
• Super Nintendo (SNES)
• TurboGrafx-16
• Virtual Boy

Download OpenEmu You can do it from the official website, without any additional payments or additional functions.

To customize the operation of the Dualshock 4 and, if desired, change the key layout for each of the above “consoles”, open the tab "Controls" in the emulator settings, select the platform in the drop-down menu, and then change the mode Input in the lower right corner with Keyboard on Dualshock 4. All key settings will be configured automatically. Just load the game image into the emulator and go.

Playing games from the nineties on a cutting-edge controller in 2013 is an unusual experience. In retro games, the superiority of the new “dad” of the Dualshock 4 over its analogues and its predecessor is very noticeable. Tough, strictly calculated jumps in Mario and inertia control in Sonic they work out no worse on the new gamepad than on the historically correct analogues of the past. There is nothing to say about the fantastic ergonomics, when in the first half hour you almost forget that you are holding something in your hands.

Modern fun is not left behind either. Company Feral, one of the largest publishers of hit games for Mac, announced the addition of full support for the Dualshock 4 gamepad to all of its projects. Among them:

BioShock
Borderlands: Game Of The Year
Batman: Arkham Asylum
BioShock 2
XCOM: Enemy Unknown – Elite Edition
LEGO Harry Potter Years 1-4
Deus Ex: Human Revolution – Ultimate Edition
Tomb Raider: Underworld
The Lord of the Rings: War in the North
Batman Arkham City GOTY
Colin McRae: DiRT 2
Mini Ninjas
Mafia II Director's Cut
LEGO Batman
GRID™
LEGO Indiana Jones 2
Sonic & SEGA All-Stars Racing
F1 2012™
SEGA Superstars Tennis
F1 2013
Tomb Raider

All of the above are sold directly on Mac App Store, so if you bought anything for your Mac there, then you're in the know. To enable Dualshock 4 support in these toys, you will need to move the PS4Dualshock.plist file to the game directory. The exception is arcade Rayman Origins, where support for this controller is native.

Turn on Dualshock 4 in games from Feral Games

Open the folder "Programs" on Mac (Shift+cmd+A). Find the game in the list installed applications, right-click and select from the drop-down menu Show package contents.

We move through the folders sequentially Contents – Resources – InputDevices. Transfer the downloaded PS4Dualshock.plist file to the folder InputDevices.

Now the controller will be automatically detected when you start the game and will not require any additional key settings - everything is done for you.

Impression

If retro games can be enjoyed through a keyboard, then any modern shooter or strategy game will require a mouse. And an ordinary mouse is the most last item in the MacBook owner's bag. And even if it is, what about on the road? Or on the couch? Or beds?

Dualshock 4 is not portable, but it can work without any surfaces, tables, etc. Just put the laptop on your lap, pick up the gamepad and play. Or even better: connect your Mac to your TV or large monitor, and then sit on the sofa. Comfortable.

The advantages of the new Sony controller become obvious precisely in new toys. Over the past two weeks I have fundamentally passed Deus Ex: Human Revolution from scratch to the very end, using a gamepad from Sony. The best impressions. In the first 5 minutes you get used to the layout and completely forget that you were using a mouse before. Button presses are crisp, the analog sticks are very precise and motion-sensitive, and the triggers are easy to reach and press effortlessly. And the gamepad itself does not “crunch” in stressful situations, does not “play” and does not betray the buttons. They say that the rubberized surface on the heads of the two joysticks wears off over time, but I did not notice this.

Dualshock 4 newest model a family of Sony gamepads created for the PlayStation 4 game console. However, unlike the first gamepads in this line, the Dualshock 4 connects to a PC quite easily. We will tell you how to connect it to your computer and use all the functionality.

Options for connecting Dualshock 4 to PC

There are two main methods for connecting the Dualshock 4 to your computer - wireless (via Bluetooth) and wired (via USB cable). It is important to note that the main thing is considered to be wireless connection. So, let's look at each of the available options.

Method 1: Dualshock 4 USB Wireless Adapter

Sony has greatly simplified the task of connecting its gamepad to a computer by releasing a special accessory. He looks like this

Thanks to this adapter, you can connect a Dualshock 4 gamepad to your PC or Mac. To do this, you will need:

1. Buy the adapter itself.
2. Connect the accessory to the computer following the attached instructions.

This method is preferable because thanks to it you will be able to use all the functions of the Dualshock 4 - vibration motor, touchpad, gyroscope, headset jacks and the actual wireless mode work. In addition to this comes the ability to use a gamepad for PlayStation Now ( cloud service, which allows you to play games on your computer with PS3 and PS4).

Method 2: Connect via Steam

This method is a little more complicated, but allows you to do without purchasing an expensive adapter. To use it, do the following:

1. 1. Login to Steam
   2. Click on the controller icon in the top right.

1. 1. When Big Picture Mode opens, go into the settings for that mode.

1. 1. In settings go to "Controller Settings".

1. 1. Check the box "PS4 Controller Support".

1. 1. Then connect your Dualshock 4 in any way (via cable or Bluetooth). Once you do this, Steam will automatically open a personalization window in which you can configure, for example, the actions and sensitivity of the gyroscope, and also reassign the gamepad keys.

As with the DualShock 4 USB Wireless Adapter, you also have access to all the functionality of your controller. The disadvantages of this method are the need to pre-set up most of the games that you have in your Steam library, as well as the inability to use DualShock 4 in PlayStation Now.

Method 3: DS4Windows Drivers

This method is more complicated than both previous ones and is designed more for an advanced user. It consists of installing special drivers that will allow games to recognize the Dualshock 4. To do this you will need:

1. 1. Download DS4Windows. Before doing this, make sure you have the latest Microsoft versions.NET Framework and DirectX, and also has administrator rights.

1. 1. Unpack and run. The following window will open in front of you:

1. 1. Be careful - point "Install DS4 Drivers" You only need to click if you have Windows 8 and higher! If you have Windows 7, click the second item.

1. 1. Wait for the drivers to install and restart your computer.
   2. Launch DS4Windows again and connect your Dualshock 4 in any convenient way.
   3. Next you will have to configure the management profile. We will not dwell on it in detail; this is material for a separate article. Just take a look at the screenshot:

Let us repeat - this method is designed for an advanced user. If this method is too complicated for you, you can use methods 1 and 2.

Method 4: Simple connection

The simplest and at the same time the most inconvenient way to connect Dualshock 4 to a computer. To do this you need:

1. Find any microUSB-USB cable.
2. Connect the cable to the gamepad.
3. Connect the gamepad to the PC.

Most likely, Windows will recognize the new gaming device and it will work. However, this connection method imposes a number of limitations:

1. Dualshock 4 is recognized as a DirectInput device. DirectInput is an outdated interaction method that will only work in older games.
2. Additional Dualshock 4 functionality (such as vibration and touchpad) will not be available.

However, if you plan to play time-tested classics, this method is completely your choice.

We showed you the most popular and convenient ways connecting the Dualshock 4 gamepad to the PC. Each of them has different functionality and its own characteristics. Try each of the proposed methods - we are sure you will find one that suits you. We hope we helped you!

casino x official website