In order to fix the error “Could not activate the cellular network. You are not subscribed to the service cellular network“On your IPhone, you usually just need to reactivate your operator’s mobile Internet. In this article we will show you exactly how to do this for the most popular cellular networks.
How to fix the error for the MTS operator on iPhone?
- Through dialing. Type a short command *111*18# and press the call button.
- Via sending SMS. Send SMS to the number 111 with text: 2122
- Go to and press the button "Reset". Then re-enter your cellular network data for MTS:
- APN: internet.mts.ru
- Username: mts
- Password: mts
How to fix error for Megafon operator on iPhone?
Automatic method Internet activation:
- Through dialing. Call the number 0500 to get automatic Internet settings.
- Via sending SMS. Send SMS with text 1 to the number 5049 .
Manual way to activate the Internet:
- Go to "Settings - General - Network - Cellular data network" and press the button "Reset". Then re-enter your cellular network data for Megafon
- APN: internet
- Username: gdata
- Password: gdata
How to fix an error for the Beeline operator on iPhone?
Automatic Internet activation method:
- Through dialing. Call the number 0880 for getting automatic settings Internet for Beeline.
Manual way to activate the Internet:
- Go to "Settings - General - Network - Cellular data network" and press the button "Reset". Then re-enter your cellular network data for Beeline:
- APN: internet.beeline.ru
- Username: beeline
- Password: beeline
How to fix the error for the Tele2 operator on iPhone?
Automatic Internet activation method:
- Through dialing. Call the number 679 to receive automatic Tele2 Internet settings.
Manual way to activate the Internet:
- Go to "Settings - General - Network - Cellular data network" and press the button "Reset". Then re-enter your cellular network data for Tele2:
- APN: internet.tele2.ru
- Username: no need to enter
- Password: no need to enter
Unfortunately, today even owners of phones such as IPhone are faced with problems. The most common problem is that the name of a specific operator is missing, and the phone itself is not.
This occurs due to reinstallation of the phone, long-term inactivity of the phone, or its direct repair. Experts call a more detailed reason for this indefinite time and the time zone in particular.
This article will help solve this problem. So, in order for you to be able to activate the IPhone cellular network, read further our article.
Causes of the problem
There are several more reasons for the problem on the iPhone. We will look at them further in the list. So, if you were unable to activate the cellular network, then this is due to the following reason::
- Internet access is limited. That is, the phone cannot reach the Internet via mobile Internet or Wi-Fi;
- The IPhone telephone device cannot achieve access to a program called “Safari”;
- Can't use email in electronic format. But subject to cellular network;
- The device cannot connect to the 3G Internet system;
- Or it says on the phone that the phone cannot activate the connection.
This is often the disadvantage of the phone if it was not possible to activate the cellular network. Before you move on to fixing any problem, you need to determine what type it is. After all, each problem brings with it a different solution.
Therefore, it is necessary to find the cause of the breakdown, and only then fix the problem. Further in the article we will look at the most common problems and their solutions so that all IPhone owners can activate the cellular network.
Troubleshooting solutions
As you already understand, there are a large number of different reasons for this problem. Below is the problem and how to fix it.
If there is no network on the IPhone for unknown reasons, then you need to take the following steps to fix the problem. First of all, you need to turn on the “Airplane” mode for a short time.
This will also help ensure that the network begins to operate stably. Experts also advise making sure that the operator’s card itself is original. Moreover, it is necessary to inspect it, because it is quite possible that it is damaged. After this, you need to turn on the phone and again work with the mode called “Airplane”. That is, it must be turned on and off several times.
In the same case, if nothing helped, but you tried really hard, then it becomes necessary to check the operator settings specific network. To do this, you need to connect to Wi-Fi and go to a specific iPhone function.
This function has a name in the form “About this device”. There are cases when the device cannot connect to the Internet; for this you need to use a standard program for all IPhones.
The second common problem and its solution
The second problem is that after the so-called factory unlock, the network disappears. Next, we will provide a solution to this problem from people who posted their problem on the forums and then found a solution to it. Read carefully and don't miss anything.
Undoubtedly, this problem most often plagues people who own an iPhone. It often occurs after the so-called unlocking of the phone using special program for this phone model. If you are faced with exactly this problem, then the next paragraph is for you.
First of all, it is worth noting that this error It has absolutely nothing to do with the phone unlocking procedure. And at all this problem is not as scary as the previous one.
If the network is unavailable, this indicates that the device itself has accepted the operator’s card, but for unknown reasons cannot find the network. The most common way to solve this problem is to simply reset all network settings. Moreover this method is also the most effective. With such simple action Every person who has this phone will figure it out.
Problem #3
The problem is network unavailability. It usually occurs after activation or deactivation of your mobile device by using standard programs iPhone phone.
So, let's look at a method that works 90 percent of the time. This method is quite long, so you need to carefully follow the sequence:
- You need to insert your carrier card and connect to a program called iTunes. The connection must be made exclusively via a USB cable;
- Next, you need to wait until the process of restoring your phone is completed. After completion, you will be presented with two immediate options from this program;
- Next, you need to click continue recovery;
- After this, you need to select the item called “use IPhone as a new phone”;
- Next, the system will prompt you to complete activation. To implement this function, you just need to use your operator card and wait until the signal appears;
- If everything you have done does not help you, we recommend that you repeat points 1,2,3,4.
It also happens that a person who has little experience cuts the operator’s card so that it fits in his smartphone. And at the same time he makes the mistake of cutting off more than necessary.
To fix the problem, you need to order a normal card from your direct provider. Also, quite often a certain provider may not provide services specifically in your area of residence.
If you don't know yet, how to set up internet on iPhone, then be sure to read these instructions. Of course, a lot depends on mobile operator, which can automatically activate the Internet settings on the iPhone, in this case, just open the standard one, enter the address of any site and check the Internet. If the pages load in the browser, then everything is fine, say thank you to your operator and start surfing the web.
But what to do if the phone does not connect to the network on its own, the answer is to continue reading how to set up the Internet on an iPhone and prepare to enter the settings manually:
Let's go to Settings– Basic– Net– Cellular data network
Internet settings on iPhone with iOS 10
In the first example, Internet settings were shown using old examples iOS versions. In order to enable the Internet on an iPhone with more recent firmware (for example, iOS 10), do the following. If you don’t have a SIM card yet, then purchase a SIM card, having previously decided on a more suitable one tariff plan. Immediately take a brochure with the settings from the seller. .
Now go to the Settings application and select – Cellular – Data settings 
Next, select – Cellular data network, and register all APNs (and, if necessary, other sections). The example above shows the settings of the Tele2 operator; you need to enter the settings of your operator.
We make settings for the Internet, which can be obtained from your operator cellular communication or search in the existing list given in the archive below. The fields should be filled in small English letters, as in the examples given:
MTS
APN: internet.mts.ru
Username: mts
Password: mts
Beeline
APN: internet.beeline.ru
Username: beeline
Password: beeline
Megaphone
APN: internet
Username: empty
Password: empty
Tele2
APN: internet.tele2.ru
Username: empty
Password: empty
You can find your operator's settings in
How to enable or disable mobile internet on iPhone
Enable and disable mobile internet in iOS it goes like this: Settings – Cellular – Cellular data. To save traffic and battery power, turn off Cellular data when you are not using the Internet.
We considered how to set up Internet on iPhone using mobile GPRS Internet as an example. But there is another way to connect the Internet to the iPhone - since the phone is equipped Wi-Fi module, it is possible to use Wi-Fi point access, which can be organized at home or use public access points. Access points in large cities wireless internet are widely developed, so while sitting over a glass of beer in a pub you can also surf the Internet, check your email or check the weather. To connect wirelessly Wi-Fi networks need to go to Settings– WiFi and activate the marker, after searching, select one of the found networks.
The disadvantage of connecting via Wi-Fi is that the iPhone is tied to a specific access point; if you move a certain distance away from it, the connection is lost. Mobile GPRS Internet is more convenient in this regard; the Internet works within the cellular coverage area.
If you are interested in high-speed Internet in Apple iPhone and you have already completed the steps above, then look at “ ” and speed up.
Hello everyone! Mistakes are always unpleasant. And unusual errors are doubly unpleasant. Tell me, is it clear what it means when the message “PDP Authentication Error” appears immediately after SIM installation maps on iPhone or iPad? Some kind of continuous set of words - PDP, authentication... Apple, that's enough, stop there already! :)
When I first encountered this problem, I was very puzzled. The SIM card is new and just purchased, the iPad also functions as it should - but when you combine these two variables, you get a “PDP authentication error” and the absence of any mobile Internet. Fortunately, all this can be fixed on your own and without visiting service center. How? Now I’ll tell you everything, let’s go!
So what do we see on iPhone screen or iPad besides PDP error? That's right, the message “cellular network activation failed.” This means that there can be three reasons for all this disgrace:
- iOS Settings.
- SIM card.
- "Iron" breakdowns.
We will not consider hardware, since hardware problems have slightly different symptoms - a complete absence of a network (and not just the Internet), a different fault text, etc.
But let’s pay closer attention to the first two points. So, what can you do to resolve the “PDP authentication error”:
As you can see, there are plenty of ways and there is nothing difficult - it’s worth trying to do absolutely everything.
I want to focus on the last solution, since in my case this was the reason for the authentication failure. It would seem that there is nothing complicated - go and change your SIM. But it was not there…
So, we insert a new SIM card into the iPad - we get a failure. We insert it into the iPhone - it works. We install another SIM in the iPad - everything works. Conclusion? The card is faulty. We go to the salon and change it. We insert it again - again an error.
In general, in order not to tell you all my adventures, I’ll go straight to the summary:
The PDP error disappeared after 3(!) SIM card replacements.
This is such an interesting story. Fortunately, a cell phone store is nearby :)
After all this, I made a conclusion for myself - when buying SIM cards check its functionality immediately (preferably before payment). Because replacing a card, although free, is still not a very exciting procedure. And if you use this service several times a day, it becomes completely sad.
P.S. As always, I look forward to your comments - tell us about your case, ask questions, recommend an alternative solution to the problem. Write!
Loading...
