ASUS Company is a well-established electronics manufacturer with good characteristics, including modems for Internet access. But any device of this type must be configured to the parameters of the provider with whom the contract for the provision of communication services has been concluded.
This instruction will give you the answer to the question of how to configure the asus rt g32 router, while it is worth remembering that the configuration algorithm and interface of devices from the same supplier are very similar, so the article will be useful to all buyers of ASUS modems with Wi-Fi support.
Preparing for setup
Technical preparation of the router for configuration is carried out in several stages:
- Connect the power supply to the Asus rt-g32 and turn it on.
- Connect the Ethernet cable provided by your provider to the modem connector labeled “WAN.”
- Connect the router port labeled “LAN1” to the computer’s network card using an Ethernet cable, which is included in the Wi-Fi modem kit.
- Reset the Asus RT g32 to factory settings by pressing and holding the “Reset” button recessed in the case for ten seconds.
Computer settings
Often characteristics network card computers may be manually configured for other connections. To work with the Asus RT g32 Wi-Fi router, you need to configure the card:
1. Open the section network settings OS. For example, for Windows 7 you need to open the settings window shown in the following figure (located in the control panel), where you click on the highlighted link.
2. Go to the connection properties by right-clicking on its icon and selecting the appropriate item in the menu that appears.
3. Open “Properties” of the item indicated in the following figure:
4. Set the protocol characteristics as shown in the figure:
We repeat the procedure for the remaining connections, if any.
Setting up the router
To configure the Asus RT-g32 according to the settings of your provider, follow the steps of the following instructions:
1. Launch any browser, enter the address 192.168.1.1 and go to it.
2. In the loading authorization dialog, enter “admin” in both fields and click on “Submit”
3. Click on the “Go to Home Page” button
4. Software shell The Wi-Fi router Asus RT G32 supports Russian, select it in the “Language” field.
5. To configure access options for the global network, click on the “WAN” main menu item.
6. Find out your connection type from your telecom operator.
7. If the provider provides the Internet using dynamic IP technology, then nothing needs to be changed on the “WAN” page. Click on the "Accept" button.
8. If the Internet is provided using static IP technology, then in the “WAN connection type” item, select the appropriate type and fill in all the form fields with the data received from the provider and click on “Accept”.
9. When choosing a type PPPoE connection indicate receiving an IP address automatically or fill in the address field if it was provided by your Internet provider. Z Fill out the fields in the “Settings” section account and connections" with the data specified in the contract for the provision of communication services, and in the MTU field enter the value 1472 and click on "Accept".
11. Apply the changes and configure the wifi module for wireless connection. If this option is not needed, reboot the modem and use the Internet.
Wi-Fi setup
To configure wireless settings in global network Open the “Wireless Network” tab of the main menu. Where you will set the following parameters:
- In the “SSID” field, enter the name of the Wi-Fi network displayed on subscriber devices. It can be arbitrary, but must consist only of numbers, symbols and letters of the Latin alphabet.
- Enable the “Hide SSID” option if you want to use this method of protecting your wifi networks from unauthorized access. When activated, the setting hides your network from subscribers, and you can connect to it only by knowing its exact name.
- In the “Authentication Method” line, set “WPA-Personal”. And in the “WPA encryption” line, select “TKIP”. These are the most well-established and widely used methods of network security.
- The “WPA Pre-Shared Key” line contains the password that users must enter when logging into your wifi network. The length of the code combination must be at least eight characters; any characters can be used.
- To fix the settings, click “Apply”.
This completes the setup of the Asus RT g32, all that remains is to reboot it and use the Internet, both via a wired interface and via Wi-Fi.
Found a typo? Select the text and press Ctrl + Enter
One of the most popular router models on the domestic market. The basis for its wide popularity is a reasonable balance of a sufficiently powerful signal, affordable price and ease of setup. However, some nuances arise here too - among the most common questions is traditionally called configuration.
Why do you need to update your router software?
Something to take into account right away - regular updates software plays a huge role in the stable and efficient operation of each router. Required condition This means working with current version BY.
Otherwise, the likelihood of various software failures significantly increases - including freezing, incomplete functionality of the device, etc. Therefore, if the current version of the software becomes outdated, you should take care of updating the firmware - we will consider an effective approach for this.
Let's move on to the firmware - a simple procedure
Installation is carried out according to the following procedure:
How to check the functionality of the router after flashing and configuration
Next, we move on to the final stage of the router firmware - testing and making sure it works. Through this procedure, we have to determine whether the device allows access to the Internet. To do this, we adhere to the following testing order:
- Turn on the computer and router.
- You should wait until the connection is completed.
- It remains to launch one of installed browsers on your computer. Enter any site into address bar browser.
- The site should open in 10–15 seconds.
- If the firmware and setup were successful, you will be able to fully launch and view sites, otherwise you should repeat the firmware and setup procedures, making sure there are no errors.
If you have recently become the owner Asus router RT G32 and encountered certain problems during its connection and configuration, then you have come to the right site. In this article we will look at the most common problems, which you encounter when setting up this router, and we will also tell you about some operating tricks.
First, you must definitely ask your provider for the following configuration features that will be entered directly during setup: protocol (PPTP, L2TP, PPPoE), IP properties (static or dynamic, automatic or manual assignment of IP and DNS), as well as the presence (or absence) binding the network card by MAC address. It also wouldn’t hurt to find out if a special login and password have been set for logging into the router’s control panel.
IN next step our path lies in the connection properties by local network (Control Panel - Network and Sharing Center shared access- our Internet connection - left-click on it - Properties). We look for “Internet Protocol Version 4 (TCP/IPv4), click on “Properties.” In the “General” tab, click “Obtain an IP address automatically” and “Obtain a DNS server address automatically.” Click “OK.”
At this point, you should already have an Ethernet cable connected from your computer to the router, into the LAN 1 connector. It is recommended to reset the settings before the first setup - this is done very easily: press the Reset button for 10 seconds.
The site will require authentication - login and password. If your provider does not set any specific data, then enter the standard ones - admin in the login and admin in the password. You can also find information on the login and password from the router control panel on the bottom of the router.
After all the operations, we find ourselves. First of all, indicate the protocol of your operator on the “WAN” tab in the “WAN connection type” line. If the address is provided automatically, we leave everything as is. If you need to register the IP address and DNS manually, then check the “No” box in “Obtain a WAN IP address automatically?” and enter the parameters below.
The main part setup is complete. Now - WiFi setup. This is the "Wireless Network" - "General" tab.
- SSID - the name of your router;
- Hide SSID - whether you need to display the router name or not;
- Country code - select your country;
- Mode wireless network, Channel width - leave as is;
- Channel - it is advisable to set something other than automatic or the first - optimally 6 or 9. This setting will help you speed up your wireless Internet connection;
- Expanded channel - leave it as is;
- Authentication method is WEP, WPA or WPA2. The most modern is WPA2, so we install it. The rest of the settings are default.
You can also enter your own password in the WPA Pre-Shared Key field. That's all on this page - you can click "Apply".
Now go to “Administration”, where we click “Reboot” and “Exit”. The router will be completely ready for use after a reboot.
This is all we wanted to tell you about setting up a router of this model. If you have any questions, ask them in the comments and we will definitely answer them. See you on the pages of our website!
Firmware 1.0.4.1 provides support for IPTV in all modes (udp-multicast, udp-to-http proxy, STB-port). IPTV has been tested on the Ukrtelecom network. Allows the use of Ethernet WAN.
XWireless router and ADSL modem
Firmware 1.0.4.1 provides support for IPTV in all modes (udp-multicast, udp-to-http proxy, STB-port). IPTV has been tested on the Ukrtelecom network. The firmware also supports working with 3G modems.
X
Dual Band Wi-Fi Router
Firmware 3.0.0.4.314 (Annex A) with support for 3G modems and full support for IPTV Ukrtelecom.
Firmware 3.0.0.5.374 (Annex A) with support for DUAL WAN, 3G modems and full support for IPTV Ukrtelecom.
Wireless N Router with EZ UI
Firmware version 2.0.3.2 for the RT-N10 B1 router, has an increased throughput WAN-LAN.
X
802.11n 150 Mbps wireless router with a powerful 5 dBi antenna to increase wireless network coverage.
Setup instructions network printer or MFP
Firmware 7.1.1.1.32b
Wireless router standard 802.11n 150 Mbit/s with a powerful 5 dBi antenna to increase wireless network coverage. With firmware version 3.0.0.3.135 supports 3G modems.
Firmware 3.0.0.4_374_5517 with support for 3G modems
Firmware 3.0.0.4.260 with a new interface and support for 3G modems
Firmware 3.0.0.4.321 with a new interface and support for 3G modems
Router, access point and repeater in one device. Two detachable antennas with 5 dBi gain. Designed according to the 2T2R design, it provides high speed data transfer 300 Mbps.
Firmware for ASUS RT-N12 D1 3.0.0.4.374.430
Firmware for ASUS RT-N12 D1 3.0.0.4_374_4230. Improved speed on PPPoE connections.
Firmware for ASUS RT-N12 D1 3.0.0.4_374_4583
Wireless N router with integrated print server
Firmware 2.0.2.5o for RT-N13U B1.
7.5.1.98 - supports 3G modems of all Ukrainian 3G communication operators and the 802.1x Ethernet authentication protocol via the router’s WAN port.
Wireless router RT-N15U Wi-Fi standard 802.11n (300 Mbps), equipped with Gigabit Ethernet ports and designed for use in the home or small office.
Firmware 3.0.0.4_374_4583
Firmware 3.0.0.4.260 with support for 3G modems
The most latest firmware for RT-N15U.
Multifunctional wireless router N-standard with file, print and media server capabilities
Firmware Version 3.0.0.4.315 - new design interface, 3G/4G support (Freshtel, Giraffe), AiCloud
Firmware Version 3.0.0.4.321 - new interface design, support 3G/4G (Freshtel, Giraffe), AiCloud
Loading...
