Samsung Galaxy J7 SM-J700H/DS is a branded smartphone running on Android 5.1. Here you will find out the characteristics, how to get root or reset the settings, and you can also download firmware (for Odin, for example) and instructions for Samsung.
Root Samsung Galaxy J7 SM-J700H/DS
How to get root for Samsung Galaxy J7 SM-J700H/DS see instructions below.
If the applications did not help, ask in the topic or use full list root utilities from the topic header.
Characteristics
- Battery capacity: 3000 mAh
- Battery: removable
- Operating time while listening to music: 76 hours
- Announcement date: 2015-06-19
- Type: smartphone
- Weight: 171 g
- Control: mechanical/touch buttons
- Operating system: Android 5.1
- Case type: classic
- Number of SIM cards: 2
- Multi-SIM operating mode: alternating
- Dimensions (WxHxD): 78.6x152.4x7.5 mm
- SIM card type: micro SIM
- Screen type: color AMOLED, 16.78 million colors, touch
- Type touch screen: multi-touch, capacitive
- Diagonal: 5.5 inches.
- Image size: 1280x720
- Pixels per inch (PPI): 267
- Automatic screen rotation: yes
- Aperture: F/1.9
- Camera: 13 million pixels, led flash(front and back)
- Video recording: yes
- Max. video resolution: 1920x1080
- Front camera: yes, 5 million pixels.
- Audio: MP3, AAC, WAV, FM radio
- Headphone Jack: 3.5mm
- Max. Video frame rate: 30fps
- Interfaces: Wi-Fi 802.11n, Wi-Fi Direct, Bluetooth 4.1, USB, ANT+
- Standard: GSM 900/1800/1900, 3G
- Satellite navigation: GPS/GLONASS
- Processor: 1500 MHz
- Number of processor cores: 8
- Built-in memory: 16 GB
- Volume random access memory: 1.50 GB
- Memory card slot: yes, up to 128 GB
- Control: voice dialing, voice control
- Sensors: proximity
- Airplane mode: yes
- A2DP profile: yes
»
Firmware for Samsung Galaxy J7 SM-J700H/DS
Official Android 5.1 firmware [stock ROM file] -
Samsung custom firmware -
If custom or official firmware for Samsung has not yet been added here, then create a topic on the forum, in the section, our specialists will quickly and free of charge help, including. with backup and manuals. Just don’t forget to write a review about your smartphone - this is extremely important. Firmware for Samsung Galaxy J7 SM-J700H/DS will also appear on this page. Please note that this Samsung model requires an individual ROM file, so you should not try firmware files from other devices.
What custom firmware are there?
- CM - CyanogenMod
- LineageOS
- Paranoid Android
- OmniROM
- Temasek's
- AICP (Android Ice Cold Project)
- RR (Resurrection Remix)
- MK(MoKee)
- FlymeOS
- Bliss
- crDroid
- Illusion ROMS
- Pacman ROM
Problems and shortcomings of a Samsung smartphone and how to fix them?
- If the Galaxy J7 SM-J700H/DS does not turn on, for example, see White screen, hangs on the screensaver or the notification indicator only blinks (possibly after charging).
- If stuck during update / stuck when turned on (needs flashing, 100%)
- Doesn't charge (usually hardware problems)
- Does not see the SIM card (SIM card)
- The camera does not work (mostly hardware problems)
- The sensor does not work (depends on the situation)
Hard Reset for Samsung Galaxy J7 SM-J700H/DS
Instructions on how to do it Hard Reset on Samsung Galaxy J7 SM-J700H/DS (factory reset). We recommend that you familiarize yourself with the visual guide called on Android. . 
Reset codes (open the dialer and enter them).
- *2767*3855#
- *#*#7780#*#*
- *#*#7378423#*#*
Hard Reset via Recovery
- Turn off your device -> go to Recovery
- "wipe data/factory reset"
- “yes - delete all user data” -> “Reboot System”
How to log into Recovery?
- hold down Vol(-) [volume down], or Vol(+) [volume up] and the Power button
- A menu with the Android logo will appear. That's it, you are in Recovery!
Reset settings on Samsung Galaxy J7 SM-J700H/DS You can do it in a very simple way:
- Settings->Backup and reset
- Reset settings (at the very bottom)
How to reset a pattern key
How to reset graphic key, if you forgot it and now you can’t unlock your samsung smartphone. On the Galaxy J7 SM-J700H/DS, the key or PIN can be removed in several ways. You can also remove the lock by resetting the settings; the lock code will be deleted and disabled.
- Reset graph. blocking -
- Password reset -
Google has officially released Android Oreo for the eligible Nexus and Pixel devices but the Android Nougat still remains the most awaited OS update for millions of Android users. The Galaxy J7, a mid-range offering from Samsung, was launched in the mid-2015 with Android Lollipop and it received the Marshmallow update the last year.
At a time when most J7 users had lost hopes of getting any major software update, the news of the Nougat update rollout for the devices has taken its users by a pleasant surprise. Yes, the Android Nougat OTA update with build version J710FNDDU1BQH7 is being rolled out in select countries. If you own the SM-J710F or SM-J710FN models of the Galaxy J7 (2016), you can install the Android 7.0 Nougat Firmware on Samsung Galaxy J7 right away.
If you have not yet received the Nougat OTA update notification on your Samsung Galaxy J7 (2016), you can check the availability of the update by going to Settings> About device> Software update and tapping the “Download updates manually” option. Alternatively, you can download the official Android 7.0 Nougat firmware from below and install it using Odin.
Being an old phone, the Android 7.0 Nougat is a really big update for the Galaxy J7 because it brings a whole new experience and features along with the Samsung Experience UX 8.1. Having updated your devices to the latest software, you will be able to enjoy features like-
- Faster performance.
- Improved battery life with all-new power saving modes.
- A higher degree of home screen customization.
- Revamped UI and Quick Settings and notification panel.
- New Doze mode for better management of running in the background.
- Many others…
Screenshots
Download Android 7.0 Nougat Firmware for Galaxy J7 (2016)
Firmware details
- Device: Samsung Galaxy J7 (2016)
- Model: SM-J710F | SM-J710FN
- Software version: Android 7.0 Nougat
- Security Patch Level: 2017-08-01
- PDA: J710FNDDU1BQH7
- CSC: J710FNODD1BQH6
- Country: India
SM-J710F:
SM-J710FN:
Install Android 7.0 Nougat Firmware on Samsung Galaxy J7 (2016)
Now here are the Android Nougat firmware installation instructions.
When your Samsung Galaxy J7 boots up, go through the initial setup and then you’ll be able to enjoy the all new Android Nougat on your phone.
For the current generation of people, the smartphone has become an indispensable assistant and an extremely useful device that combines hundreds of various functions. Taking a photo, counting the number of ingredients, setting reminders, checking the weather, reading the news, chatting with friends - this is not a complete list of everything that you can do. modern smartphones. Sometimes we simply forget that they do not last forever and are subject to gradual wear and tear.
Smartphones running operating system Android has long filled the whole world with its diversity. Their software code is open and ready to be edited or improved. While using such devices, there are times when the software component malfunctions and the smartphone stops working properly. To solve the problem simple reset Resetting to factory settings may not be enough - you need to flash the Samsung Galaxy J7 SM-J700.
Fortunately, manufacturers mobile technology and just enthusiasts have found dozens of ways to change the firmware for all Android devices without exception. The process will take a few minutes and the smartphone will come to life, starting its daily work with renewed vigor. AndroGoo website prepared detailed instructions on how to flash Samsung Galaxy J7 SM-J700.
What do we need?
- Device charged at least 50% (if possible).
- Original USB cable.
- latest version.
- Latest firmware:
If a new OS version has been released for your smartphone or the one you need is not in the instructions, please let us know in the comments below the post.
Samsung Galaxy J7 SM-J700 firmware process
- If Kies was installed on your computer, remove it.
- Download and install for Samsung smartphones and tablets.
- Download and install version 3.0.7.
- Reboot the computer.
- Unpack Odin onto your desktop. In the same folder we extract the firmware files from the previously downloaded archive.
- On your smartphone go to “ Settings«, « For developers"(if there is no such item, go to " About the phone" and click many times on " Build number"), turn on " USB Debugging" And “Unlocking, provided. production".
- We transfer the smartphone to Download Mode. To do this, turn it off completely, hold down the buttons at the same time Home+Power+Volume down.
- After the screen appears with the message Warning, confirm the choice by pressing the button Volume up.
- The phone has entered download mode.
- Let's launch Odin on behalf of the administrator.
Files that can be found in the archive with the firmware
The picture shows the names of files that may be in the archive with the firmware and indicates where to insert them in the Odin window.
If there is only one file and takes up a lot of space, insert it into the field PDA/AP. This is the firmware. Other files according to field names.
- In the appropriate fields on the right, select the firmware files, based on the example above. IMPORTANT! Only checkboxes should be checked Auto Reboot And F. Reset Time.
- This is what the program window looks like ready for firmware:
- Click on START and wait for the firmware process to finish. At the same time, it is strictly forbidden to disconnect the smartphone from the computer and touch the USB cable. The whole procedure will take a few minutes - the exact time depends on the power of the PC.
- Once finished, the device will reboot itself. We disconnect it from the PC and start using the latest firmware.
I bring to your attention a detailed step by step instructions by updating the Samsung Galaxy J7 SM-J700 smartphone to new official or custom firmware. Getting Root superuser rights on Samsung Galaxy J7 SM-J700, installing custom recovery TWRP Recovery.
Installing the official firmware on the Samsung Galaxy J7 SM-J700 smartphone using service program Samsung Odin. In order to install new firmware on your smartphone, you first need to download several files to your PC:
Download latest Official firmware for Samsung Galaxy J7 SM-J700 – Android_6.0.1_J700HXXU2BPF2 or Android_5.1_J700HXXU1APA3
Before flashing your phone's firmware, you first need to decrypt it.
To remove the lock from the Samsung Galaxy J7 SM-J700, you need to disable the reactivation lock. Go to “Settings” - “Lock screen and protection” - “Find phone” and disable “Activation Lock.” Before and after the firmware update procedure, you need to do a general reset of the device to factory settings to avoid all sorts of errors and interface slowdowns.
When performing this procedure, all your data and files will be permanently deleted.
Option 1: On the device, open “Settings”> “Backup and reset”>” Account»> “Reset data”> “RESET DEVICE” and click “Delete everything”
Option 2: Turn off the device, press and hold the “Volume Up”, “Home (Central)” and “Power” buttons and after a few seconds the “Recovery” menu will appear. In the “Recovery” menu, select “Wipe data/factory reset” -> “Yes – delete all user data”, deleting all user data will begin. After the process is completed, select “Reboot system now” and the device will begin to reboot.
You can skip this step, but remember! If you do not reset the data, lags may appear after the update and unstable work devices in general due to tails previous firmware, and recently before full reset smartphone, you also need to delete your Google account, otherwise the smartphone may be blocked.
After you have downloaded everything, unpack the archive with the driver for the Samsung Galaxy J7 SM-J700 and install it. Then unpack the archive with Odin and the firmware.
We launch the program for Galaxy firmware J7 Odin as administrator. To do this, hover over Odin and right click mouse and select "Run as administrator", then click "Yes".
After launching Odin, arrange the firmware files in the following order:
The file BL……….tar.md5 is inserted into the “BL” field
The AP……….tar.md5 file is inserted into the “AP” field
The file CP……….tar.md5 is inserted into the “CP” field
The CSC file……..tar.md5 is inserted into the “CSC” field
We check that the “checkmarks” are only in the “Auto Reboot” and “F. Reset Time"
We translate samsung phone Galaxy J7 SM-J700 in firmware mode. To do this, turn off the phone and then press and hold the “Volume Down”, “Home” and “Power” buttons and after the menu with a yellow triangle appears, press the “Volume Up” button
We connect the smartphone using the included USB cable to the PC and in the Odin program, the inscription “COM” should appear in the upper left corner, highlighted in blue, then press the “Start” button.
Note: If for some reason your PC does not recognize your device, try reinstalling the driver and/or try other USB ports.
The smartphone firmware process has started. After successful firmware, the device will reboot automatically and the message “Finish” will appear in the Odin program.
Installing custom recovery TWRP Recovery v3.0 on Samsung Galaxy J7 SM-J700
And so let's start installing custom recovery on Samsung j7
If you have not yet installed Samsung drivers on your PC, download and install them. Then connect using standard USB cable, your smartphone to your computer. After the PC recognizes the phone, additional drivers and updates will be installed automatically.
We will need the Odin 3 program, download Odin
Then download the custom recovery for Samsung J7 SM-J700 TWRP Recovery for firmware J700HXXU2BPF2 (OS 6.0.1)
Turn off your smartphone, and then (with it turned off) press and hold the “Volume Down” + “Power” + home key until the phone boots into Odin mode (Download Mode). You will see a warning, confirm your desire to load into this mode by pressing the “Volume Up” key.
With your phone in Odin Mode, connect it to your PC using a standard USB cable.
Run the Odin 3 flasher program on your PC as an administrator
In the AP line, indicate the path to the previously downloaded file with custom recovery J7 TWRP Recovery with the extension “.img.tar” and select it
Uncheck “auto reboot” and press start (the phone should be flashed, flashing time should not be more than 30 seconds, the result should be like this (succeed 1/ failed 0);
We do not touch the Smartphone until the firmware process is complete; usually the firmware does not last longer than 30 seconds.
Without turning the gadget into working condition, we go straight from Download mode to just installed TWRP Recovery by holding down three buttons (volume up + home + power button, when Samsung appears, release the buttons).
All! We rejoice.
Installing custom firmware on Samsung Galaxy J7 SM-J700
To install custom firmware on your Samsung Galaxy J7 SM-J700 phone, you must have custom recovery TWRP Recovery, if you don’t have it, see the point above.
Download to your PC any custom firmware that you like, for example – Notexperience_Rom_For_J7_V2.zip or cm-13.0-20160521-UNOFFICIAL-j7eltexx.zip
Then copy the firmware file to the phone's memory. Then turns off the smartphone and boot into custom recovery TWRP Recovery (with the phone turned off, hold down the power buttons + volume up button + HOME)
And through TWRP Recovery install the firmware file:
Go to Wipe and select Advanced Wipe
Check the boxes: “Davlik Cache”, “System, Data”, “Cache”, “Android Secure”.
Doing “Swipe to Wipe”
Go to Install -> Select the memory where the custom firmware is located, and select Swipe to Confim Flash, the installation will begin
After installation in recovery, select the Reboot -system item and the device will begin rebooting.
Ready! You have successfully flashed custom firmware! reboot your smartphone and use it with pleasure (without paying attention to the bugs of the custom firmware)
Instructions for installing the official single-file firmware on the Samsung Galaxy J7 (SM-J700x).
Drivers and programs
Attention!
To install the official stock firmware on the Galaxy J7 and return the phone’s status (“Settings” > “About device” > “Properties” > “Device status”) to “Official” after switching from custom firmware and thereby returning the ability to receive updates over the air, just follow the instructions provided.
Installation instructions
Unpack the downloaded archive into a folder with Odin PC for convenience. The file in the ".tar" or ".tar.md5" format must be left, but the "SS_DL.dll" can be deleted.
Reset your device.
To do this, go to the settings section " Backup and reset settings", select the item " Reset data» > « Reset the device", enter the PIN code (if one is set) and click on the button " Delete everything" The phone will reboot.
Run Odin PC as administrator.
Put your device into download mode ( Download Mode).
To do this, you need to simultaneously hold down the Volume Down key, the Home button and the Power button. Then wait until the phone reboots and agree to the warning by pressing the Volume Up key.
In this state, connect the smartphone to the computer. In Odin the message “ COM».
Click on the “ AP» and select the TAR firmware archive.
Items " Auto Reboot" And " F.Reset Time" must be activated, A " Re-Partition"if active - must be disabled.
Click on the “ Start" The firmware installation process will begin.
At the end of the operation, if everything was successful, the message “All threads completed. (succeed 1 / failed 0)". The phone must be restarted manually by holding down the power button until the screen turns off. It may take up to 5 minutes for your device to boot up initially.
ATTENTION!
If the device does not boot for a long time or the data has not been reset, it must be performed from recovery.
To do this, you need to simultaneously hold down the Volume Up key, the Home button and the Power button. After downloading, select " Wipe data/Factory reset", and then - " Reboot system now" If after these steps the device also freezes when loading, you need to reflash it again.
Loading...
