Have you encountered a situation where there is no Internet due to the fact that the router has become inaccessible? There is no way to go to settings because I forgot my password. What to do? There are two methods: software and hardware. Let's take a closer look at how to reset a password on a router.
A little theory
A router is a microscopic computer equipped with a processor, permanent and RAM. Management occurs using the OS.
After purchasing the device, to go to the default settings, a login and password are set. These values change. What to do if you changed them and forgot? Let's consider this issue in more detail.
What is it for
Any router can fail. Password reset is used if:
- Forgot your password;
- incorrect settings;
- the provider has changed;
- to change settings home network.
What to do first
When reset, all device settings will change. The router will have to be configured again.
Hard reset
There is a small button or hole on the device. It needs to be clamped with something sharp (for example, a paper clip) for 10 seconds. will be reset to factory settings.
How to reset the password on an Asus router
Open the browser, enter http://192.168.1.1, or router.asus.com. Go to the “Administration” section.
Further, as in the screenshot.
The router will reboot. Recovery will take 2-3 minutes.
How to reset the password on a Tp-Link router
Go to 192.168.1.1. Password and login (if you have not changed it) “admin”.
Next, do this:
This will happen and the settings will be restored to factory settings.
How to reset the password on a D-Link router
A soft reset is no different from the method discussed above. Write in the browser 192.168.0.1. Next, go to “System” - “Configuration” - “Factory settings”.
Hard reset
There are situations when code fragments remain in the router’s memory. The device is not working properly. Then pressing the reset button will not help. What to do? Perform the following sequence of actions:
- Press "Reset" and hold while you perform the following steps;
- After 30 seconds, turn off the power to the router;
- Hold the reset button for 30 seconds.
How to reset a Wi-Fi router password
Connect without a password using the WPS standard. Almost all router models support it. For this:
The data will be transmitted by the router. The other person won't connect this way.
How to view in OS
Press "Win+X", select "Options".
Further, as in the screenshot.
Conclusion
We looked at how to reset the login and password on the router. The easiest way is to reset the settings to factory settings. Use it if you are confident that you can configure the settings yourself. Otherwise, try connecting using WPS, or look at the password in the system settings.
Network protection: necessary or not? Typically, owners are eager to protect their own WI-FI network as reliably as possible. To do this, they set a password not only for connecting to the network, but also for accessing the router settings, and also activate filtering MAC addresses. This approach is completely justified if you need to protect your wireless network from strangers.
Possible consequences.
On a public network, anyone connecting will be able to change settings. This is unsafe, so access to the ROUTER settings should only be from a personal computer and protected with a strong password.
If you still need to make your wireless network defenseless, try to take into account a few nuances.
All people within the spread area open network, will be able to connect to it and freely use your Internet. This means that the load on the router will be several times higher. If it is low-power, it will periodically freeze. Therefore, the equipment must be really good.
On a public network, anyone who connects will be able to . This is unsafe, so access to the ROUTER settings should only be from a personal computer and protected with a strong password.
In the Network and Sharing Center shared access» Change the status of your network from “Home” to “Public” to prevent strangers from accessing personal data and files on your computer.
The speed of Internet traffic will become several times lower, depending on the number of people connected to the network. WI-FI devices. If there are too many of them, the connection may sometimes be lost.
Now you can proceed to setting up the WI-FI network and making it open.
How to disable protection.
In the TP-LINK router.
To change ROUTER settings, you need to connect the router to the computer network cable(highly recommended), but it is also possible via WI-FI. Read the sticker with different information on your router, and find the IP address (for example: or ). There is also a login (most often ADMIN) and a password (most likely also ADMIN), they provide access to the settings. Launch an Internet browser, preferably “Opera” or “ Mozilla Firefox", but you can also " Internet Explorer" Enter the IP address in address bar and click the "Go" button. In the window that appears, enter your password and login (from the sticker on the router). Click the “Submit” button after entering the data in this window (if you previously changed your password or login, you need to reset it and return the settings to “default”). The ROUTER settings window will open.
In the list of transitions on the left side of the window, select “WIRELESS” “WIRELESS SECURITY”. In the Russian version, this is “Wireless mode” “Wireless mode protection”. Press the “DISABLE SECURITY” button; an enable mark should appear inside the button. In the Russian version, “Disable protection.” After this, save the changes by clicking the “SAVE” button. Now your network has completely disabled security, and you can connect to it without a password.
In an ASUS router.
Go to the main settings window using the above method. From the Authentication Method drop-down list, select OPEN SYSTEM and click the Apply button. The result is the same as in the previous description.
In the D-LINK router, go to the settings in the same way. There we open the “WI-FI” tab. Next is the “Security Settings” tab. Then in the “Network Authentication” drop-down list, select “OPEN”. Click the “Apply” button. That's it, the settings are complete.
General principles.
If you are using a router of a different version, then look in the settings wireless network points with similar meaning. The main thing is that they mean disabling the WI-FI network protection. or opening the network to everyone.
Conclusion.
To protect your wireless network again, return the previously changed settings to their initial values.
When connecting equipment for wireless Internet access, a password is used. It is necessary to protect your local network from foreign access and connection. However, few people scrupulously collect all access keys (for websites, for a router, etc.) and store them. As a rule, such information is not recorded anywhere, and even if it is in written form, it can easily be lost. Therefore, it is not surprising that sometimes memory fails. So, what should you do if? Consider several options on how to get out of the situation.
Cause for concern
You may suddenly need a router access key if you want to connect an additional device (smartphone, laptop, Tablet PC) or reconnect with an old computer (for example, after repairing or reinstalling it operating system). Restoring access to your home wireless network is quite simple. The most important thing is not to panic.
Ways to solve the problem
The easiest way to find out forgotten password WiFi - view the equipment settings on the computer monitor. Moreover, any device that the router can see is suitable for this purpose: tablet, laptop, PC. If only one computer was connected to the network, then you can connect it to the router via cable, view the equipment settings, find the password, and only then restore the wireless network. This the method will work if your computer is equipped with an operating system Windows Vista or Windows 7 64-bit and has the appropriate software. Initially, you need to enter the “Control Panel”. Select “Wireless Network Control Center” in it. You will see a list with the name of the network. In its “Properties” there is a “Security” tab. In it you need to find the “Network Security Key”, opposite this inscription there is a line with hidden characters. The password is encrypted in it. To make it visible, you need to check the box next to “Display entered characters.” Now the forgotten password will appear on the screen.
Password recovery methods
If the method described above does not help, you can resort to radical methods. For example, change the password on a WiFi router after resetting its settings. To do this, press the special “Reset” button on the device body and hold it for 10-15 seconds. As a result, factory settings will be returned. After this, you can change the password to a new one. To do this, you need to find the “Tabs” section in the equipment settings and click “Access Control”. Now you should select the “Passwords” line. A field will appear in which you will need to enter the old and new device passwords. Finally, you need to confirm the correctness of the transaction. To do this, click “Save/Apply”. Of course, data such as the access key to the router is recorded in writing when concluding an agreement with the provider. But, if you lose an important piece of paper, then you will have to pick up your passport and go to the office of the company that provides an Internet connection. But in this case, various unforeseen difficulties may arise that will not allow recording in a short time.
Settings for different router models
Depending on a particular router model, there are some nuances. But in any case, when you forgot your WiFi password, you can easily look it up in the equipment settings. If you have TP-Link router, you need to enter the “Wireless Mode” menu and select “Wireless Protection”. In this tab you will find what you are looking for. Another option, if connected. In its menu you should find the “Wireless” item. It contains the information you need. If you have another problem, recover your password on WiFi dir 300, - we recommend doing it next steps. Find “Setup” and click on “Wireless Setup”. Next to “Enable” and “Enable Wireless” check the box to activate it in the router wireless module. On your PC, look at the name of the network and enter it into the device settings. Now you need to install encryption of the traffic that comes over Wi-Fi. Then create New Password to connect to the network and save the configuration.
Password recovery programs
Another brilliantly simple option on how to connect WiFi if you forgot your password - use special utilities. Will do simple program WirelessKeyView. It will help you find the necessary information on your computer so that the hardware can issue the key to the router. It's free and takes up little space. You just need to download it and install it on your PC. The utility finds all devices connected to the computer and allows you to view the access keys for them stored on the computer. All data appears on the screen in the form of a list. Which is very convenient: it’s easy to find a key that you forgot. You need to look for the WiFi password in the “Key” column. One important point: You can open the program only if it was downloaded with administrator rights. This option with useful utility It will not work only if your router was used to sort by poppy addresses. Another one convenient program- Wifi Key Finder. It is very similar to the one already described above, and is also distributed freely on the Internet, absolutely free. Just run it, and it will scan the computer's memory and find saved passwords in it to restore the wireless network. To prevent information from being lost in the future, it is better to print the list obtained through the program or save the file. Its latest version is suitable for the operating room Windows systems 8.
One of the most simple options To avoid unnecessary steps if you forgot your wifi password, use the router’s web interface. To access it you need to enter into the browser network address devices. Access to the web interface will be provided using a login and password. If you have not changed the key, its factory settings will look like this: admin-0000, admin-admin, admin-1234. But, if you have already made changes and lost your credentials, then the entire setup process will need to be repeated again or resort to the methods already described above. But when choosing a password for a Wi-Fi router yourself, you need to follow the main rules for creating it. It should be quite complex and must include numbers and letters of different case. Experts do not recommend using wep encryption.
The access key to the network or to the network administrator page is lost, don’t be discouraged. It is possible to restore them. This article will help you solve this problem.
Standard passwords for routers
Each Wi-Fi router operates based on Internet access data and local network, which are the login and password. They are created at the very beginning of use in the first stages of setting up network equipment. The login is always the same Latin word “admin”, and the password can be either the word “admin” or the numbers 1234, 123, 0000.
There may also be no password at all. And for the Kyivstar operator, such a login is possible.
In any case, in order not to push your luck and not waste time on a random selection, you need to look at the technical data sheet of the router, which is included in the kit and may look like a brochure. If the router came to the user as a used product and the technical passport is not available, it is worth asking your friends, acquaintances or relatives who use a network device made by the same manufacturer, because login and password will be the same.
Factory settings
At the initial stage of setup, after entering standard identification data, the user will be offered the opportunity to change the login and password to make it difficult for unauthorized users to log into the domain. Those. On the computer screen, the interface will display all the necessary data, as well as tips on generating an “access key”, which includes the login and password.
After passing this stage the user will be prompted to create a local network with automatic connection to the Internet for ease of use in the future. At the same time, you should not confuse the login and password for accessing the local network operating on the basis of the router and the Internet, because these are two different things.
I forgot my router password, what should I do?
What to do if you forgot your router password is a common question for many users who have forgotten or lost their data. What to do in this situation? Recovering the key is easy. It all depends on which network password and login were lost. If it's a local network issue, i.e. in your router, then there are no serious difficulties to restore it.
Video: resetting the TP-Link router interface password
If the user has forgotten the Wi-Fi router password, he needs to act as follows:
How to recover the password and login for the router if they are needed to access the Internet?
In case of data loss, the following procedure is required to use World Wide Web resources:
Thus, the user has the opportunity to independently correct the situation without outside help.
Restoring an Administrator's Domain
In addition to those users who have lost access data to the local network and the Internet, there are also those who manage to lose access to the administrator page ( home page router). In this case, there is no chance to recover lost information and change the settings of the network device. On forums there is often a question like: “I forgot my admin login and password. What do i do?". It's easier to reset the settings in network device and re-create a new local network.
To reset the router parameters, just press and hold the button on the rear panel in this position for several seconds.
In this case, the lights on the front panel of the device will go out for a while, and then start working again. The button itself is located in a small hole to prevent accidental reset, and it can only be pressed using an additional device, which can be a match, a needle, a pin, etc.
Recovery methods
The router settings will be of no use if the user loses the access keys to the administrator page, router, local network and the Internet. In this case, each of the access keys will be restored differently. The main methods are hardware and software.
The hardware method of restoring access involves checking the settings on the router’s home page, while the software method relies on the use of a software registry and special work applications that scan all information on the computer about network use.
When hardware recovery to the network is required, at a minimum, you must have a login and password for the administrative page on which all the parameters and settings of the local network and Internet connection are generated. To enter the administrator page, you need to type the manufacturer’s IP address in the address bar of your Internet browser.
The IP address can be found on a sticker located on the bottom of the router.
If there is none, then the home addresses of the routers look like this:
- D-link 192.168.0.1
- Zyxel 192.168.1.1
- Asus 192.168.1.1
- Netgear 192.168.1.1
- TPlink 192.168.1.1
After logging in to the appropriate router address, the user will see an interface with many settings and network parameters. In order to find out data on the local network, you need to enter the “local network” tab. This tab may also be called wi-fi network or have names similar in meaning.
After which the user should find the “wpa key” parameter. Opposite it will be the router access password.
Password and access to the router are not everything. In addition to the local network login key, you may also need login information for the provider's domain. This data is also specified in the network device settings.
To do this, after fixing the data on access to the local network, you need to go to the “Internet” tab, where not only the parameters and connection technology will be indicated, but also the data on logging into the Internet.
Most often, the login and password are located next to the “settings” line account" or "connection settings".
Restoration by utility (program)
Except hardware method There is also a software solution for eliminating the problem of losing identification data when logging into the Internet and local network. It is used by professional users and is not suitable for helping beginners. Thus, the participation of a second user with more than high level knowledge in this area.
At software method The following working applications are used to help restore the necessary data on logins and access passwords:
- Dialupass;
- Remote Desktop PassView;
- RouterPassView;
- WirelessKeyView;
- Wireless Password Recovery.
And this is not the whole list. These programs themselves are amateur developments, and not the result of the work of professional teams, so the interface of these programs is not always convenient and understandable for a beginner. But if the user nevertheless decides to take independent action, then he needs to be prepared for the fact that most links to such work applications may contain malicious software.
Throughout the entire operation of the profile program, to search and detect the login and password from the network, an antivirus with the maximum possible set of functions must be running on the computer in order to prevent infection of your computer. personal computer and damage or theft of personal data.
The operation of such programs is based on the basic principles of the operating system, which, in turn, records every step of the user in the electronic information space. In this case, a register is formed that describes all actions performed recently. They will be stored as encrypted files until all the memory on the hard drive is full.
It is impossible to open these files without special knowledge and professional skills. Not a single program known to many users will be able to read them and display the necessary information on the computer screen. In this case, special applications are needed to help reveal encrypted logins and passwords.
After appropriate use of the program, the PC owner will be able to independently use both local and Internet networks in the future. But we must not forget that all access keys to networks must be saved, both in the form of a regular file with printed text, and in written form, so as not to experience significant difficulties in connecting in the future.
Video: installing and configuring a Wi-Fi router
To prevent loss of data for accessing the local network and the Internet, novice users are recommended to take the following steps:
- during setup and installation of drivers for network equipment, the program will offer to save a file with backup access data on the PC desktop;
- after creation with network access data, the file must be copied to removable media and make another copy in any other folder;
- After copying the files, you must manually write down on paper all the necessary logins and passwords from the network.
In addition, do not forget that the keys are also freely available for viewing from the computer of the user who configured the router. This data can be seen in the network properties. To do this, you need to find the network connection icon on the taskbar on your desktop in the lower right corner.
Then point the cursor at the name of your home network and click right button. When a new window appears, select the “properties” option and in the next new window you will be able to see all the necessary keys.
Using these tips will reduce the likelihood of complete loss necessary information for local Internet network.
Question answer:
How to view Wi-Fi password in Windows?
To view the password for accessing a wireless local network in Windows, you must:
Is it possible to recover the network security key?
The security key for accessing the local network is easy to recover. Just go to the administrator page and in the settings find the “security key” line, where the access password will be specified.
How can I find out my login and password if I have lost it?
In order to find out the login and password for accessing the Internet, the administrator page or the local network, you should use specialized programs (Dialupass, Remote Desktop PassView, RouterPassView), which can find the necessary data in encrypted network usage history files.
Similar information can also be found on the home page of the router, if the access keys to it are not lost.
What to do if you forgot the password for your wifi router?
If the user has forgotten the password for wi-fi router you need to use specialized programs to read encrypted information (Dialupass, Remote Desktop PassView, Router Pass View). But if the programs do not help, you will need to reset the device settings to factory settings by pressing the button located on the back panel of the router. Next, you need to reconfigure the network equipment and the network itself
>
Loading...
