The processor of the TV supra resets the settings. Reset Samsung TV to factory settings. How to reset your TV

Sometimes it happens that children or adult users inadvertently turn on the lock on the TV, or parents block the TV from children, and then find it difficult to remove it. There are often situations when the owner simply forgot the password and now he himself cannot view the channels. Signs that your TV is blocked are:

Display blue screen, which shows a key;

A field appears on the screen where the device asks you to enter a PIN code (password);

Only one channel is available for viewing.

Answering the question of how to unblock a TV, it is necessary to highlight three main options for solving this problem, namely:

Disable blocking using the remote control remote control by typing a special combination of buttons;

Configure channels again (sometimes they can be lost by accident or due to a failure in software);

Flash TV memory.

Usually the blocking can be removed on your own, but if flashing is required, it is better to seek the help of a specialist. In general, for independent work the owner needs to have only two things - instructions for his TV and a working remote control for it. If the instructions are lost, you can easily view or download them on the Internet. Regarding the TV model, this information is indicated on the back panel.

What to do in a standard situation

Having the instructions for the TV in hand, you should carefully read those sections that relate to blocking. Your task is to find a special code, a combination of numbers, after typing which the remote control is locked and unlocked. The instructions also contain actions and their sequence specifically for your model. If there are no instructions, and network access is also in this moment is not available, you will have to strain your memory and remember what exactly led to the device being blocked.

From the remote control you need to press the P and + buttons, holding them down at the same time. Next, you need to enter a three or four digit password in the field. The type of such combinations usually consists of the same values, for example, 1111, 4444, 333, coinciding with the number of the most frequently used channel. Quite often standard codes in the form 1234 and others are used. After entering, press + again.

If after these steps you cannot unlock the Akai TV, Samsung, LG, Thomson models and others, the password is not reliably known, you can try other combinations, they are set by the factory settings and are not too complicated.

There are TVs that support locking with only one button. Accordingly, to block or unblock channels, you need to press and hold this button for five to ten seconds.

Possible problems and what to do about them

Before you unlock your TV, you should first figure out the cause of the problem. Based on practice, the most common cases are presented below:

What could it be	How to fix
The user set a password and forgot it, does not know it (a blue screen with a key may indicate this)	Press and hold the DISP button on the remote control for ten seconds. If this does not help, use the standard remote control in accordance with the instructions for the TV
The child lock is set, but the remote control is lost	It is impossible to solve the problem without a remote control, you need to find one or buy a new one
The TV does not respond to pressing buttons on the remote control	The remote control may be faulty or the batteries may be low. You should purchase new batteries or a remote control. You can also use your smartphone as a remote control (if your TV supports this function). You can also check the functionality of the old one using your phone by holding down any button and taking a photo of the remote control pointed at the phone - if there is a micro-flash in the photo, the remote control is working. In this case, the TV port has probably failed and you need to call a technician.
Only one channel is available for viewing	The channel settings are probably out of order. There is no need for a wizard, as you can configure them yourself

Sometimes it happens that after the blocking is removed, TV channels do not tune in or then they get lost again, the TV menu freezes, and other strange glitches are discovered. This may indicate that the tuner is faulty and the TV needs to be re-flashed (updated). For inexperienced users, it would be more advisable to contact a specialist.

To set up your SUPRA TV you need to do several steps. In the new models of SUPRA TVs, it is not difficult to set up the TV to watch free digital terrestrial TV channels or to watch digital cable television. Also, the new line of Supra TVs has a Smart TV function.

How to set up your SUPRA TV

To set up a digital TVSupra needs to be connected antenna cable, it can be a simple outdoor or indoor antenna. If you want to watch cable TV channels, then your TV must be connected to the cable operator's network in order to tune in the channels on the TV.

Find and press the MENU button on your remote control so you will go to the settings menu of your Supra TV .

In this menu you will need to do several actions.

In the Country item, select Russia.

In point Antenna you will need to choose required format broadcasting Cable or Ether.

Choose Cable if you have cable digital television DVB-C. Ether you need to choose if you have an outdoor or indoor antenna for digital reception terrestrial television DVB-T2.

Click on the Auto search item and enter the auto-tuning menu.

Select the ALL item. If you need to configure all channels, both DTV and ATV, if you want to configure only digital channels, then select only DTV.

Confirm in the window that appears by clicking OK.

Wait until the auto search finishes, because the setup may take minutes.

Your Supra TV is ready to watch your favorite TV shows and movies.

Today on the territory of the Russian Federation people are massively switching from analogue television to digital. This is primarily due to high quality signal, as well as the ability to view more channels. Owners of all modifications of modern TVs, as well as people with outdated TVs, can make the transition. In such a situation, they need to purchase special receivers that will receive and decipher the signals. In the instructions they will be able to learn how to set up the Supra TV for digital television, manually or automatic mode.

What you need

If the owner of a Supra TV plans to watch digital channels, he must first find out whether his TV supports this format. Information can be obtained by studying the instructions in which the equipment manufacturer indicates all technical and operational data. In the case where the TV does not support digital format, the user needs to purchase a set-top box. This device is designed to receive, decrypt and play signals received from regional or local providers. Each person can connect a digital TV set-top box independently using the instructions.

Setting up the Supra TV for digital television must be done using the remote control. First, the owner should check its serviceability and the presence of working batteries.

How to set up a new TV

Regardless of what kind of tuner the TV has, built-in or external, the process of tuning channels must be carried out according to plan:

1. Initially, all additional equipment is connected.
2. The analog antenna is inserted into the TV into the corresponding connector.
3. Press the “DVD/TV” key on the remote control.
4. After switching to the TV channel reception mode, you need to click on the “TV SETUP” button.
5. The screen should display certain color data: background, saturation, contrast, brightness.
6. The user must complete all functional settings: language, image width. You will definitely have to configure the basic system options, in particular duplication, interchange of channels, sound, TV standard (in this case, the SUPRA TV is configured for digital broadcasting).
7. Selected additional modes: On/Off time, clock, sleep mode, etc.

Important! As soon as Smart TV TV will be configured with all basic and additional options, you can start searching for digital TV channels.

Automatic channel tuning on TV

To reduce the time spent searching for channels, the owner of a Supra TV can do everything automatically. To do this, press the “TV SETUP” key on the remote control. Next, you need to click on the “PRESET” button. Several buttons will appear in front of the user, from which “AUTO SEARH” should be selected. As soon as the system is given a command, it will automatically start searching and saving digital TV channels.

Attention! The automatic search process starts from the very low frequencies. It takes no more than 6-10 minutes. As soon as the process is completed, the equipment will begin to play the first TV channel in the list.

Manual channel tuning

In some cases, owners of Supra TVs cannot carry out automatic search channels. You should use it in the TV menu to select manual mode by pressing the corresponding key. To do this, you need to enter the desired settings section by clicking on the “TV SETUP” button. Next, manual mode is selected: in this case, “SEARH”. The user should press the 3/4 buttons. The system will start searching for channels, after which each one will have to be saved in manual mode.

Important! If the owner of a Supra TV uses an external dvb tuner t2, then he initially needs to click on the “MENU” button. After this, “AUTO SCAN PAH” will appear on the screen. Only in this case will using the receiver bring the expected result.

Setting up satellite channels

To watch satellite television The owner of a TV Supra must first purchase all additional devices. You should not skimp on the cable, as its quality will affect the purity of the signal. You need to install F-plugs at its ends, and then connect the antenna. Next step will be the installation and configuration of the CAM module.

To set up satellite channels we need to act according to plan:

1. On the remote control you need to press the “Settings” key.
2. In the TV menu, select the “settings” section.
3. Is carried out automatically or manual search channels. Only the user must indicate “satellite” in the “antenna” subsection.
4. In the proposed list of operators, you must select the one whose module CAM is used.

Setting up digital channels

If the owner of the TV Supra does not know how to set up digital channels on the TV, he should follow the instructions:

1. You enter the menu.
2. The “channel” section is selected.
3. Click on the “ok” button.
4. Using the arrow located on the remote control, the user must go down to the “antenna” item.
5. In the submenu, select the “cable” section.
6. There is an item “country”, it indicates “RF”.

Setting up cable TV

In the event that the TV owner is faced with the task of connecting cable TV, he should act according to the standard scheme. Only in the “antenna” subsection it is necessary to indicate the following broadcast format (depending on the type of set-top box): Broadcast (DVB-T2) or Cable (DVB-C).

Setting up an old TV model

To ensure that the old modification of the TV receives digital television channels, you need to purchase a receiver. With its help, you can also watch terrestrial digital television, after all the settings have been completed. The owner of TV Supra must search for TV channels using the remote control.

How to watch TV without an antenna

To look into good quality programs, without analogue or satellite dish, the owner of TV Supra needs to purchase a special set-top box. Thanks to this device, he will be able to connect to interactive television. The connection process is quite simple, but it provides two options:

• If the receiver supports Wi-Fi, then its Ethernet cable (where the amplifier is powered) is connected via the antenna connector
• The user needs to purchase special wireless media bridges.

If your TV device is unstable and reboots frequently, you can fix the problem by configuring the software correctly. Find out how to reset a Samsung TV to factory settings later in the article.

Problems in the functioning of TV appear due to violations in the built-in program, which is often updated automatically.

Because of this, Samsung TV begins to reboot frequently while watching a TV broadcast.
The software also crashes due to incorrect user settings on the TV.
Therefore, it is not necessary to completely reboot and flash the program, but to set the TV to factory settings.

Series D

Rollback on almost every Samsung model is carried out in the same way and according to a single scheme. The only difference is in the names of the items.

Management:

1. First of all, you need to open the TV section and click on the Exit button. You should hold it for 10 seconds.
2. A new window will open.
3. To reboot the system, you need to click OK.

Text on the screen will indicate that the program has returned to the initial stage. Then you can set up your TV again. This also applies to Smart TV.
Experts recommend that before starting the procedure, try to update the Smart TV program, and begin actions to roll back the software if this operation does not bring the desired effect.

Series K

Instructions:

1. Open the menu using the remote control.
2. Go to TV setup mode.
   Go to “Support” and click on device self-diagnosis.
3. A list of possible actions will open, where the action to reset the characteristics will be indicated. To restore to factory specifications, you need to click it.
4. To confirm the operation, you will need to enter a special code - 0000.

If the actions are correct, the TV should reboot on its own.

Series J

Instructions:

1. Using the remote control, click on the “Menu/123” button.
2. A new window will appear on the screen, where we select “Settings”.
3. Going to the next page, select self-diagnosis and “Reset”.
4. Enter the password – 0000, and confirm the operation with the “OK” key.

The TV will begin to reboot.

Series H

To roll back the program, use the same scheme as on the J series - select self-diagnosis, reset, and enter pin code, if it has not changed, then it is 4 zeros.

Series F

Instructions:

1. There should be a "More" button on the left side of the screen.
2. Select menu.
3. Go to the support page and click on self-diagnosis.
4. Click on the reset function.

Syria E

How to reset your TV:

1. Using your remote control, go to the TV menu, click on “Settings” and select the “Support” tab.
2. Click on self-diagnosis and activate the reset function. After this, a new window will appear.
3. Next, you will need to enter a standard PIN code and confirm your action.

After turning on the TV, you will notice that all Smart TV settings have been reset to factory settings.

For TV brands M,Q series and LS, the actions are similar. After going to the “Settings” tab, you need to select the support menu and click on “Rollback”.

Rollback via Smart Hub

You can use alternative way rollback

Instructions:

1. Press the Smart key on the remote control.
2. In the menu that appears, select the cancel characteristics section.
3. To confirm your actions, if the code has not been changed, dial “0000” and press OK.
4. The TV will reboot.

After resetting the settings on the TV, everything before installed applications will be deleted and Account will be reset and you will have to create it again. It will also be possible to do the same rollback on other models - Supra, Philips, Sony Bravia, Toshiba.

Today it is difficult to find a TV that does not have the ability to block. Most often it is put on in order to prohibit anyone from watching it. This is mainly intended for children, but if the LG has a password and you don’t know it, much less you don’t have a remote control, then you won’t be able to unlock it, no matter how old you are.

But how to unblock a Hyundai TV if you did it by accident, lost or broke the remote control? In this case, there are several options for solving the problem.

How can you tell if your TV is locked?

This is quite simple to understand. Just look at its screen. The following will be displayed there:

The Supra TV glows blue, and there is a window on its screen that requires you to provide a password;

Instead of a password window, a “key” or “lock” may be displayed.

Sometimes an Akai TV can become blocked because a large number of buttons on the remote control were pressed at the same time. This will happen if you sit on it unsuccessfully or if your child gets to it. In this case, the TV may not only be blocked, but the channel settings will also be lost.

How to unlock without a remote control?

EIf you don't have a remote control or it doesn't work, you need to try the following:

Open and carefully look for the solution to the problem in the instructions. They will probably tell you where the button is located, which will help reset all settings and at the same time remove the block;

If there is nothing in the instructions about such a situation, then you need to try to remember why it started showing the corresponding icon;

Try pressing several buttons on the Sokol TV itself. This will switch to Menu mode and disable the lock;

If none of your actions help solve the problem that has arisen, call a specialist and entrust it to him.

You can also try unlocking Smart TV using the remote control. If it is broken or missing, you need to buy a new one. Just keep in mind that universal device Not suitable for changing channels. You need to find your own one. To do this, take the technical data sheet with you to the store to accurately indicate the model.

After you purchase the original remote control from your Toshiba device, it will be easier to remove the unit. This can be done in the following ways:

Using the instructions for your Smart TV, press a certain combination of buttons or one of them and wait. Thus, the blocking is removed;

Enter your PIN code. If you don't remember it, you can reset it to its original settings using the remote control.

If this doesn't help, then the reason is something else.

What else could be causing the problem?

The Sanyo TV may also be blocked due to the fact that your settings have gone wrong or there are problems with the device’s memory. In this case, only flashing the device will solve this problem. You can do this yourself, but if you do not have experience or are afraid that you will not be able to cope with this task, then seek help from the service center specialists.

If you only have one channel working, then the issue is not a blockage, but a failure. In order for everything to work again, you need to configure the channels again.

Most often, remove the block from modern devices from Philips, supporting the Smart TV function, is impossible without a remote control. The methods described in the article can only help you if it is not blocked due to a technical failure.