1s windows 10 x64 crashes. Are you an avid gamer of World of Tanks?

With the advent of the new tenth version of the operating system, many are interested in how to install 1C on Windows 10. Although many users have already appreciated the functionality and convenience new system, users software 1C: The enterprise also noticed the fact that programs from 1C create many errors when running on Windows 10. Despite all positive quality, Windows 10 is a frankly crude and unfinished system. Specialized software, such as 1C: Accounting, works on this system with malfunctions.

Windows 10 can be installed in two ways:

• Upgrade from version 7 or 8 of Windows;
• Install the system version from scratch.

Regardless of the implementation method, certain problems arise when working with 1C 7.7 and other versions. Therefore, if you decide that the cause of the problems incorrect installation- this is an incorrect conclusion.

Problems when working with 1C on Windows 10

One of the most common errors that occur when working with programs from 1C version 8.3 and others on Windows 10 is crashes, even to the point where the program writes “The program has stopped working.” It is noted that after installing 1C: Enterprise it is completely empty Windows programs practically do not function, and when installed on version 7k updated to version 10, it starts, but there are many minor errors that interfere with normal operation.

Some versions work better on Windows 10, some worse. Therefore, if you have the opportunity, it is better to test your software version for compatibility with Windows 10 and only then update.

The most common errors that may occur when working with 1C on Windows 10:

• Indexing errors;
• Encoding problems;
• Lack of logical integrity check;
• DLL failures;
• OpenConf errors, etc.

If you are unable to solve all the problems that have arisen on your own, then you should seek help from a specialized company. Experienced programmers, engineers and customizers will quickly correct all violations and failures in the system.

Installation procedure for version 8.3

If you still decide to install 1C on the tenth Windows version, then the installation process itself will differ slightly from a similar installation on 8 x64. First of all, you need a package to install 1C software. It can be purchased as a software disc or downloaded from a special website.

The resulting archive should be unpacked - usually it unpacks itself, but you can use any archiver program. After that, in the folder where you placed the unpacked files, find the installation file and run it. After launching the installer, you will need to click the “Next” button and start the installation process.

On new page The installer will prompt you to select a pair of suitable system elements that you want to install. You can select all or just some of the following:

• 1C: Enterprise;
• File version, or thick client;
• Thin client;
• Server;
• Expansion modules for the server;
• Translations of the program into different languages;
• Server administration;
• Server for storing all important configuration elements;
• Converter.

Having selected all the files that should be embedded, click on the “Next” button again. On the next page you will need to select the language in which the product will be launched. Click on the “Next” button again.

Transferring 1C from Windows 7 to 10

If you selected Server in the installation components, you will see additional screen to select server settings. Once all the settings have been selected, you just have to click “Install”.

After the installation is complete, the program will give you the option to install a security driver. If you are going to get keys for the program using an emulator, you do not need to install this driver. At this point, the installation process is complete, you can end the process and restart your computer.

The most rational way to get stable operation of 1C software on Windows 10 is to transfer from Windows 7. This is not as complicated a process as it seems. The first thing you need to do is copy all the databases to removable media, disk or flash card. Subsequently, they will need to be transferred to the computer after reinstallation. The location of the databases can be found when starting the program.

After that, start transferring the platform itself. Go to HDD, on which you have the program installed. Usually this is drive C. Find the Program Files folder there and copy it to removable media.

Now you can update the system to Windows 10. When the process is completed and you receive a computer with the new OS, you can begin transferring 1C back to the computer.

How to implement 1C 7.7 during migration?

First, copy the databases to your PC. Don't forget to remember the exact path where you copied them. After that, go to drive C to the Program Files folder and copy the previously saved 1Cv77 folder there. In this folder, look for a subfolder called BIN. In it, find the file 1cv7l.exe, create a shortcut on your desktop and run it.

When you open the program, it will be empty. To find the databases, click Add and navigate to the location where you placed the databases. You will find the code the desired folder, click on OK. After this, you need to launch 1C 7.7 in configurator mode. In “Administration”, find the item “Code page of information security tables” and select “+current system installation" Confirm the action and wait a bit. The program will start in normal mode and will work as efficiently as possible.

Working with a new system like Windows 10 is fraught with problems. Installing 1C on it and using it is much more difficult than on Windows 2000. If you are not ready to face such problems, then do not rush to switch to Windows 10 and wait until all the problems are resolved.

For many users after Windows updates 10 some malfunctions and malfunctions occur in the computer device. The main ones are the following:

1. Windows 10 does not boot for a long time.
2. The system does not want to start and work.
3. Black screen.
4. Appearance blue screen with mistakes.

To eliminate them, it is necessary to understand the sources of operational failures and possible ways getting rid of these sources.

If after last update Windows 10 system does not start, remember how it behaved before shutting down or rebooting. Perhaps some program was downloaded, or the error appeared after connecting a new device and virus software. In the course of troubleshooting such problems, the system may improve or deteriorate its performance. Therefore, it is necessary to be prepared to restore it and return it to its original, working condition.

The system does not start or takes a very long time to load

The system takes a long time to load or does not load at all - this problem occurs when running a large number of additional programs or malicious software connecting to the process. Therefore, you immediately need to check your computer for viruses and prepare electronic media with installation Windows files 10.

To solve the problem, take the following steps:

1. Using the media, we load the device into safe mode. In the menu, select the source from which the system modules and drivers needed for your computer will be loaded.
2. Open Task Manager. This can be done using the Ctrl + Shift + Esc keys. Find the Startup tab.
3. Startup contains the entire list of applications that can be loaded when the system starts. It is necessary to select from among them the minimum that is needed for normal operation of the computer, and disable the rest.

These simple steps will help reduce system boot time and improve system startup.

Working with safe mode is useful when removing viruses, unnecessary programs, fixing driver errors, activating an administrator account.

In addition, you can optimize and defragment the disk:

1. Click on Start.
2. Select the Computer tab, drive C.
3. In the window that opens, find the Properties item and click the Optimize button.

Using CCleaner, you can remove all junk files from the disk and erroneous keys from the registry.

If Windows 10 does not work after updating, restore the system to an earlier working state. This method is only suitable if the computer creates system rollback points or restore points. To do this, you need to carry out the following procedure:

1. Reboot your system. Once it turns on, press F8.
2. The recovery menu appears.
3. Go to Diagnostics, then Advanced Settings.
4. Find the Recovery tab.
5. Following the instructions, select a Restore point to a rollback state from the available list.
6. Restart your computer. The current version of the operating system is removed.

Blue screen appears

CRITICAL_PROCESS_DIED. The error code is accompanied by the warning “The computer is not started correctly” or “ Windows system loaded incorrectly."

In such cases, a regular reboot helps.

INACCESSIBLE_BOOT_DEVICE. The error may appear after updating to Windows 10 or BIOS motherboard, when restarting the computer after a system rollback, partitioning of the hard drive, if files are damaged.

The easiest way to resolve this error is:

1. In the Automatic Repair window, select Advanced options.
2. Among the list of parameters, you need to find Boot options - Restart.
3. After the system restarts, press the F6 button to reboot into Safe Mode using the Command Prompt.
4. Enter the command phrases one by one:
   • sfc /scannow;
   • dism /Online /Cleanup-Image /RestoreHealth;
   • shutdown-r.

System files will be scanned and restored if they were damaged.

Black screen appears

There are malfunctions in which the computer device does not turn on, and the screen is black after the update. This problem occurs when video card drivers are installed incorrectly, exiting sleep mode, removing a virus, or downloading updates.

The screen can have 2 types:

1. With a mouse cursor.
2. No cursor, solid black display.

In the first case, the screen can have not only a mouse cursor, but also a rotating wheel. What does this mean and what to do in such cases?

Software glitch

This happens when the system booted only for the first time before Windows 10, when you turned off and immediately turned on or rebooted the computer. Software glitch occurs as a result of an update.

To restore the system, you need to update it again.

System conflict with primary drivers

Previously installed drivers may create a conflict with the system, so to resolve this issue, do the following:

1. Find Start - Control Panel. Under Power Options, click System Settings.
2. In Shutdown Options, uncheck the Enable box quick start(recommended).
3. Save your settings.
4. Click on Start. Find the Computer tab.
5. Right-click Properties and do the following: Hardware - Device Manager - Video Adapters.
6. Find your video card and Update drivers. Drivers are installed either in automatic mode from the Internet, or from special software.

In the second case, when the screen is only black without a cursor, start the system in safe mode:

1. Press and hold on your keyboard Shift key, continuously click on the F8 button to open Safe Mode. This system launch is simple, but does not always work.
2. In the window that opens, find the following sections: Diagnostics - Additional parameters - Command line.
3. Type bcdedit /set (globalsettings) advancedoptions true.
4. Click the Enter button.
5. In the newly opened window, click Continue. The download continues.
6. In the new window, select Enable Safe Mode.
7. Press Enter.

Correcting virus activity

If the computer does not boot, the screen is solid and black, then most likely the system has been damaged by malicious virus software. Try the simplest method.

Boot Windows 10 in safe mode, scan with an antivirus application and delete infected files.

If viruses have damaged the explorer.exe file, which is responsible for the work GUI, you can perform the following operation:

1. Press Ctrl+Alt+Del keys simultaneously or open the Start menu.
2. Go to Task Manager, then Run new task.
3. Write explorer.exe in the line and run the task.
4. Through the Run line, pressing the Win + R buttons, enter the regedit command.
5. Expand the HKLM branch.
6. Go to the Software section.
7. Next, click the Microsoft - Windows NT - Current Version tabs individually.
8. Open the Winlogon folder, then Shell and double click.
9. Change the value to explorer.exe.
10. Save your settings.

Getting rid of system malfunctions after upgrading to Windows 10 is not particularly difficult and does not require technical knowledge and skills from the user. After completing one of the operational procedures, the system will boot without delays or failures. Your computer will work better.

For more than six months, Microsoft has been offering everyone Windows users 7 and Windows 8 upgrade to Windows 10 for free. According to the developer, this is the best operating system. But is it worth rushing to update? Now we will consider this issue in detail.

Working with 1C Enterprise 8 on Windows 10

There are no surprises in this matter. All software products from the 1C Enterprise 8 line (, 1C Enterprise server, etc.) work perfectly on the new operating system, as well as on all previous Windows. On the other hand, we cannot say that 1C on Windows 10 works faster. It works exactly the same. And then the question arises: “Is it worth changing the awl for soap?”

In what cases is it worth upgrading to Windows 10?

Despite all of the above, switching to Windows 10 can be beneficial. I strongly recommend upgrading to Windows 10 in the following cases:

1. The 1C Enterprise 8 program is buggy or crashes.

In this case, instability may be associated with drivers or settings of Windows itself. Switching to Windows 10 may solve the problem this problem in a positive way.

2. You are using a pirated version of Windows.

If you are a user of unlicensed (illegal) Windows, then right now you can upgrade to new Windows and become the owner of a legal version of Windows 10 COMPLETELY FREE. This is the only way to get Windows 10 for free! Free Windows 10 are provided to all owners of PCs based on Windows 7 or 8.1, including those who use pirated versions. This was officially announced by Microsoft Vice President of Operating Systems Terry Myerson.

3. You are an avid gamer Games World of Tanks.

It is not known whose merit is greater - Microsoft or game developers World of Tanks, but the fact remains: on the predominant number of computers running Windows 10, the World of Tanks game works better. The picture is smoother, FPS is higher, the game loads faster, and what else does a gamer need?

Thus, we have discussed all the main options when it is worth upgrading to Windows 10. In all other cases, I recommend not to rush to switch to a new one operating system. If you decide to install Windows 10, then I hasten to reassure you - the system has the ability to roll back to previous version Windows that you had installed. You are given 30 days to think about it. Enough to make you love or hate Windows 10.

How to upgrade to windows 10?

There are two ways to upgrade to Windows 10. To update you just need to have installed Windows 7, Windows 8 or Windows 8.1 (you can have a pirated version).

1 way to upgrade to windows 10
Just enable installation of updates for your Windows and after some time you will see a proposal to switch to a new operating system.

2 way to upgrade to windows 10
Just go to this page and click the "Update Now" button. The update installation will begin immediately.