Question How to upgrade Windows 7 to Windows 10 for free has become relevant for many. Practice has shown that users reach a dead end and do not know how to start an update to Windows 10. Upgrading Windows 7 to Windows 10 already installed on a computer or laptop, without deleting it and saving all user data, is quite simple.
How to upgrade Windows 7 to Windows 10
In fact, everything is very simple and prosaic, and does not require any special skills. Microsoft provides the opportunity for everyone to officially upgrade Windows 7, Windows 8 or Windows 8.1 to Windows 10 completely free of charge, of course, with a license for the current version operating system from which you are planning to upgrade to Windows 10.
The whole process will be shown and described below. Windows updates 7 on Windows 10 step by step. The transition from Windows 8 and Windows 8.1 to Windows 10 in terms of the actions performed is no different from the operations performed for the “Seven”. So let's get started.
First you will need to determine the bit depth installed version 32 or 64 bits. To do this, click on the “Start” button, find the “Computer” item and right-click on it, select “Properties” from the drop-down menu that appears. A new window will open with basic information about your system; the “System Type” line will indicate the bit depth.
Based on the knowledge gained, you need to download the appropriate version of the program Windows updates 10 Media Creation Tool (links are provided at the end of this page).
Make sure that your computer or laptop has an Internet connection. automatic update You will need to download about 4 gigabytes of data. Launch the downloaded Media Creation Tool, select “Update this PC now” and click on the “Next” button
Windows 10 will begin downloading from the Internet, at which time a progress indicator will be displayed. You can continue to use your computer, but do not restart or turn off it. The download can take from several minutes to several hours depending on the speed of your Internet connection.
and then windows for searching for updates and preparing the system for updating
Upon completion of the preparatory processes, a window will appear with the license terms, which you will read carefully and if you are satisfied with everything, click on the “Accept” button
The search for updates will be started again, then the readiness for installation will be checked, and if there are no problems, a window will appear with the inscription “Ready to install”, which will indicate which version will be installed, i.e. if you had Windows 7 Home installed, then Windows 10 Home will be installed, if you had Professional, then it will be updated to Professional, and all your data will be saved and the system will be activated automatically. All that remains is to start the update by clicking on the “Install” button
After launching the update, which will take from several minutes to an hour depending on the speed of your PC, the computer will reboot several times; all ongoing processes are accompanied by explanations in Russian and will not cause difficulties in understanding. After installation is complete, you will become the proud owner of the operating system
Have you updated to the next version of Windows 10, version 1809, and are experiencing problems? If yes, this guide will help you solve them.
Like the previous version, Windows 10 October 2018 Update 1809 is a major update. It brings with it new functionality and improvements in work personal computers, laptops and tablets. However, each such update carries the risk of new problems.
Typically, major Windows 10 updates come with big changes to the code, which can lead to compatibility issues, driver issues, unexpected errors, and other issues that can impact performance and user experience.
In addition to unknown bugs, other problems may appear that are not caused by changes in the system. Sometimes an update fails to install due to incompatible software, outdated drivers, unusual configurations hardware.
Below we will look possible problems and options for their solution.
Fixing Windows 10 October 2018 Update problems
When switching to a new one Windows version 10 There are two types of problems. There may be errors during the installation process that are not in themselves problems with the new version. And there may be problems related to system design, compatibility, etc.This guide will help you solve both problems during the installation process and after.
Fixing installation file download errors
If error 0x800F0922 appears, the device is most likely not connected to the servers Microsoft updates or the System Reserved partition is not large enough. Try the following:Turn off VPN
After that, try installing the update again.Enlarge System Reserved section
Sometimes third party applications, like antivirus programs, can store their data in this section. In this case, there will not be enough space on it to install the system update. Use third party tools to increase the partition size. You need at least 500 MB.
You can also perform a clean installation of Windows 10, which will automatically create a partition of the correct size.
Update using Media Creation Tool
When trying to download installation files, error 0x80246007 may occur. It shows that the file could not be downloaded.In this case, you can use the Media Creation Tool to install a clean version of Windows 10, where the partition will be created automatically.
Troubleshooting installation errors
It is recommended to install updates through the update center. However, errors may also occur in it. To solve them, you can use the built-in Windows 10 error correction tool.
To do this, do the following: open the Settings app > Update & Security > Troubleshoot > Windows Update > Run the troubleshooter. Click on the "Apply" button this fix"if it exists. Follow the instructions on the screen.
After that, restart your computer and try to update again by opening Windows Update.
Fixing unexpected installation errors
If a problem occurs when trying to download installation files, error number 0x80190001 may appear. In this case, use the cleanup tool in the Settings app to delete temporary files. Do the following:
Open the Settings app > System > Device storage > Storage Sense > Free up space now. Select the "Delete temporary Windows installation files" option.
After that, try installing the update again. If problems persist, use Media installation Creation Tool.
How to fix problems with USB storage media
If Media Creation Tool does not download updates
In some cases, downloading cumulative updates may freeze. If Media Creation Tool is unable to download the update, please restart the application. When the installation files have downloaded, disable network cable or wireless connection. When the application times out, installation of version 1809 will begin.
After installation is complete and initial setup system, reconnect the network to complete the installation process.
Fixing installation problems via Media Creation Tool
Typically, restarting Media Creation Tool will resolve most errors, but if there are problems with dynamic updating, the application will continue to freeze every time you try to download installation files.In this case, you should start the process manually:
1. Open File Explorer.
2. Go to C:\$Windows.~BT\Sources.
3. Double click on the Setupprep.exe file.
After this, the installation process should begin. If this does not happen, you can use the Update Assistant tool.
Correcting errors when creating a bootable USB flash drive
If you are using one created with the Media Creation Tool bootable USB flash drive, the installation process may fail. One or more files on the flash drive may be damaged. It is impossible to fix them, so you must create the installation flash drive again. To do this, do the following:1. Download Media Creation Tool from Microsoft server.
2. Double click on the MediaCreationToolxxxx.exe file.
3. Click the "Accept" button.
4. Select “Create installation media” (USB flash drive, DVD or ISO) for another computer.
5. Click Next.
6. Select the language, architecture and edition version.
7. Click Next.
8. Select the USB flash drive option.
9. Click Next.
10. Select "Removable Disk" from the list.
11. Click the "Next" button.
12. Click the "Done" button.
After completing these steps, you will receive a new installation flash drive without damaged files. You can install the latest version of Windows 10 from it.
Fixing the "Update is not compatible with your device" issue
Although the process of downloading and installing Windows 10 updates occurs automatically, if the device has not been connected to the Internet for a long time or you have turned off Windows Update, when using the installation flash drive, an error may appear with a message stating that the update is not applicable to your computer.
To solve the problem, make sure your computer is connected to the Internet. Go to Update Center and check for updates. You can also download and install the update manually.
How to solve Update Assistant problems installing the October update
Solving the problem “Something went wrong”
If you use Update Assistant to update, you may encounter error 0x8007042B and the message “Something went wrong.” After this, the update installation process will be terminated. It is not clear from this message what exactly went wrong. You can try the troubleshooting steps.Try not to remove necessary programs and antiviruses, disable unnecessary ones peripherals. After this, run Update Assistant again.
If the error persists, try another update option. Try a clean install of Windows 10 or use the Media Creation Tool to create a bootable USB flash drive.
Fixing a problem downloading an update via Assistant Update
Although Microsoft created Update Assistant to install updates when Windows Update doesn't work normally, sometimes the tool itself experiences problems. For example, problems with downloading installation files.Usually, problems with Internet access are to blame in this case:
Disconnect and reconnect the network cable. Try unplugging the router and plugging it back in after a few minutes. Restart Update Assistant.
Restart your computer, launch Update Assistant.
Instead of Update Assistant, try using Media Creation Tool
How to fix ISO problems
When you try to update, you may receive error 0x8007025D - 0x2000C, which may indicate that one or more ISO image files are corrupted. To resolve this issue, use the Media Creation Tool to create a new image:1. Download Media Creation from the Microsoft website.
2. Double click on the MediaCreationToolxxxx.exe file to launch the utility.
3. Click the "Accept" button.
4. Select the option “Create installation media ( USB disk, DVD or ISO) for another PC."
5. Select language, architecture and edition.
6. Click Next.
7. Select the "ISO file" option.
8. Click Next.
After completing these steps, Media Creation Tool will create a new ISO image, which should allow you to update your computer or virtual machine.
If the error persists, you can try creating the image on another computer.
How to fix storage problems
Storage problems during installation
System requirements require at least 20 GB of disk space when upgrading from a 64-bit version of Windows 10 and 16 GB when upgrading from a 32-bit version. If there is not enough free space on your hard drive, one of the following errors may appear:0x80070070 – 0x50011
0x80070070 – 0x50012
0x80070070 – 0x60000
0x80070008
0xC190020e
Open the Settings app > System Device storage > Storage control > Free up space now.
You can select the following files to delete:
Previous Windows installations
Files for reporting Windows errors, created by the system
Windows Defender Antivirus
Windows Update Log Files
Downloads
Sketches
Previous Windows installations
Temporary files
Basket
Temporary Internet files
Delivery optimization files
DirectX Texture Builder Cache
Important: Do not select temporary Windows installation files or installation Windows files ESD, since these files are needed for updating.
Click on the "Delete files" button. After completing these steps, you should be able to install Windows 1809 without any problems.
If you cannot free up enough space, connect a flash drive or removable HDD. You need at least 16 GB of free space so that Windows 10 can use it as temporary storage to perform the update.
Fix missing or damaged files during installation
If you encounter errors 0x80073712 and 0x80245006, they mean one or more installation files are missing or damaged. To solve this problem, you should open memory control and delete temporary files.
Go to Settings > System > Device storage > Storage control > Free up space now. Highlight "Previous Windows Installations" or "Temporary Files", click the "Delete Files" button.
After that, check for updates in the update center. You can also use the Media Creation Tool after upgrading your computer to version 1809.
How to fix hardware and software compatibility issues with the October Update
Fixing hardware compatibility issues during installation
You don't need to have the latest components to run Windows 10, but you may still encounter errors 0xC1900200 - 0x20008 and 0xC1900202 - 0x20008 if your computer does not meet the minimum system requirements.This usually happens when upgrading only very old computers. Minimum system Windows requirements The 10 are as follows:
Processor: 1 GHz
RAM: 2 GB
Storage: 16 GB of disk space for 32-bit systems and 20 GB for 64-bit systems
Graphics: Direct X 9 or later with WDDM 1.0 driver
Monitor: resolution from 800 x 600 pixels
Typically, computers already running Windows 10 do not have problems with system requirements when updating. However, budget models Difficulties arise from time to time. If you see errors 0xC1900200 – 0x20008 or 0xC1900202 – 0x20008, these are usually problems with RAM. In this case, you should increase the amount of memory.
Fixing application and driver compatibility issues when installing updates
When trying to install the Windows 10 October update, there is a chance you will see error 0x800F0923. It indicates an application or driver compatibility issue.This is usually an error graphics driver, it may be outdated or conflict with old program or antivirus.
To find the specific source of the problem, you need to use an update through the Media Creation Tool or Update Assistant. When you follow the on-screen instructions, these tools detect and report hardware incompatibility.
If the device driver is at fault, go to the manufacturer's website and download the latest driver. If this is not the case, you can uninstall the driver, install the update, and then reinstall the driver.
To do this, do the following: on the desktop, right-click on the “This PC” icon, in context menu Click on the "Properties" command. In the System window, select Device Manager from the left menu. Select the device you need, right-click on it, select the “Uninstall driver” command.
After that, try updating Windows 10.
Driver incompatibility
If you receive error 0x80070490 - 0x20007, one or more device drivers are incompatible. Error 0x80070003 - 0x20007 means that the installation process failed during the driver installation stage.When you see errors 0x80070490 - 0x20007 or 0x80070003 - 0x20007 after downgrading Windows 10 to a previous version, follow the steps above to remove drivers.
Software incompatibilities
When the application is at fault, open the manufacturer's download page latest version. You can also temporarily uninstall the application and try to update Windows 10.
Open Settings > Applications, select from the list required application and click on the “Delete” button. Try installing Windows 10 and then reinstalling the application.
Fixing driver compatibility issues during installation
When upgrading to any version of Windows 10, you may encounter an error that starts with code 0xC1900101. This means there is a problem with the driver. The options are as follows:0xC1900101 - 0x20004
0xC1900101 - 0x2000c
0xC1900101 - 0x20017
0xC1900101 - 0x30018
0xC1900101 - 0x3000D
0xC1900101 - 0x4000D
0xC1900101 - 0x40017
There is also error 0x80090011, which refers to the driver during the data transfer process.
Solutions may be as follows:
Disable unnecessary peripherals
To get rid of the driver error, disable the peripherals with all drivers. After that, update and reconnect your devices. You can disconnect all unnecessary devices, such as removable drives, printers, cameras, leave the keyboard and mouse.Update device drivers
If you receive errors 0xC1900101 or 0x80090011, you need to make sure you have the latest drivers installed. Open "Task Manager", select the desired device and in the context menu click on the "Update driver" command. You can also temporarily remove your device before updating Windows 10.
In addition, you can download the driver from the manufacturer’s website and install it manually. When installing video card drivers, there may be separate instructions.
Free up disk space
Insufficient disk space can also be the cause of error 0xC1900101. You need to free up at least 20 GB on your hard drive. We have already described how to do this above.
Restoring the current system version
Windows 10 contains tools command line System File Checker (SFC) and Deployment Servicing and Management (DISM) to repair your current installation and fix potential problems with device drivers. First try executing the SFC commands, then DISM if necessary.Hard drive repair
Windows 10 also includes the CHKDSK command to check and fix errors. hard drive. Click on the Start menu, type cmd, in the Run window type chkdsk /f c: and press enter. If necessary, enter Y and press enter to set the scan schedule.
After completing these steps, restart your computer to begin checking your hard drives.
Manual update
If all else fails, you can perform a clean installation of Windows 10 using the Media Creation Tool.Fixing application compatibility issues during installation
If you see error 0xC1900208 – 0x4000C, one or more applications are incompatible with the update. The easiest way is to temporarily remove these applications. Third-party antivirus software is usually the culprit. How to remove applications is described above.
You may need to complete additional steps when uninstalling desktop desktop apps. Follow the instructions on the screen.
How to fix problems during the October 2018 Update installation process
Windows 10 fixes before installing a new version
Usually after long work Windows 10 without the necessary maintenance will start to experience performance degradation. Problems accumulate that may appear during the update installation process.To resolve these issues, use the SFC and DISM command line tools.
Fixes for problems early in the update process
When you try to stop updating Windows 10, you may receive error 0xC1900107. It means that you have recently performed an update and previous version needs to be removed.
Restart your computer and try installing the update again. If this is not possible, go to Memory Sense and free up space as described above. After that, try installing the updates again.
Solving problems with random reboots during the update installation process
When installing version 1809, you may see error 0x80200056 after an unintentional reboot. You need to restart the update process and do not turn off the computer during installation.
Fixing errors without administrator rights
Error 0x80070522 means that you are installing the update via standard account user. For successful installation, you must have administrator rights. If it is not home computer, to obtain such rights, you must contact your system administrator.Fixing issues with update installation completion
When installing major or cumulative updates, two errors may occur:Error: Unable to complete installation of updates. Cancel changes. Don't turn off your computer.
Error: Unable to configure Windows updates. Cancel changes.
There are known errors on Windows 10 that occur when updates cannot be installed. We need to find the cause of the error.
There is a section on the Windows Update page that tracks information about each update and its errors. Open Settings > Update & Security > Windows Update > View update history. Look at the error code. Find a description of this code on the Internet. It can also be described there possible solutions Problems.
How to fix problems after installing an update
Solving the problem with activation October 2018 Update
If your device has not been reactivated, you may receive error 0x803F7001 and a "Windows not activated" message on the activation page in the Settings app.
You can use the Activation Troubleshooter. You can also wait a couple of days for Windows 10 to reactivate on its own.
Solving network problems
Sometimes, after successfully updating to the latest version of Windows 10, your device may lose internet access or the speed may be slow. The reasons may be varied, including software errors in the update, change or reset network settings during the installation of an update or a problem with the network adapter.
To troubleshoot problems, you need to open the solution tool network problems. Launch the Settings app > Network & internet > Status > Remedy network problems. Follow the instructions on the screen.
Reset all network adapters
If the method above does not help, you can reset all network adapters. Go to Settings > Network & internet > Status > Network reset > Reset now. This will reset all network adapters to their default settings.
Solving problems with a black screen after installing an update
Sometimes after installing an update, graphical problems may occur in the form of a black screen. A Windows 10 update, a cumulative update, or a graphics card driver issue could be to blame. You can go back to a previous version of Windows 10 until the problem is resolved.
Go to Settings > Update & Security > Recovery > Go back to a previous version of Windows 10. Click the Get Started button. Select the reason for the return, click “Next”, refuse to check for updates, click the “Next” button twice, then click the “Return to previous build” button.
How to fix problems with dark Explorer interface
One of the most notable innovations in the October version of Windows 10 is the introduction of a dark version of File Explorer. However, there are already reports of problems with this version of Explorer. Due to these issues, the toolbar, background, and some other elements may appear white.You'll need to wait until the cumulative update is released, but until then there are a number of steps you can take.
Turn on and off
Go to Settings > Personalization > Colors > Default app mode > Light. Then select Dark again.
Changing the graphic theme
Go to Settings > Personalization > Themes > Windows.
Using a new account
If the problem persists, you can create a new account. If there is no fault with the color of the conductor, you can go to work in this account.Fixing screen brightness issue
After installing the October update, some users are reporting problems with brightness settings. For some, the brightness dropped to 50%, for others, the ability to adjust the brightness was completely lost. This may be related to the video card drivers. Install the latest drivers. You can download them from the manufacturer’s website or update them through the “Task Manager”.
If you already have the latest driver, you can uninstall the device in the Task Manager and reinstall the driver.
Microsoft has removed the brightness button from the Battery section since it is available in the Action Center.
How to Fix Intel Audio Driver Problems
If you try to update using the Media Creation Tool and Update Assistant, you may receive an error that says “Your attention is required.” Microsoft says device drivers Intel Display Audio has compatibility issues with this update. This may increase the consumption of system resources and energy, which will reduce the operating time of laptops and tablets.If you see this message, it is recommended that you click the Back button and cancel the update installation. Microsoft itself also blocks the update from appearing on such devices.
How to fix the problem with applications not having Internet access
Some users write that after updating applications from the Microsoft Store, they lost access to the Internet.Enable TCP/IPv6
In addition to the TCP/IPv4 protocol, Microsoft Store applications and Edge browser require the TCP/IPv6 protocol to be enabled. If you have applications that cannot access the Internet, make sure this protocol is enabled.
Open Control Panel > Network and Sharing Center and shared access. In the left pane, click Change adapter settings. Right click Click on the desired adapter and select “Properties”. Check the box next to “IP version 6 (TCP/IPv6)”. Click OK.
Changing the network profile
If this doesn't help, you can change your network profile from private to public.
Open the Settings app > Network & Internet > Status > Edit connection properties. Select "Public".
Resetting network settings
Go to Settings > Network & internet > Status > Edit > Network reset > Reset now.
How to solve problems with Task Manager
If Task Manager no longer displays the CPU usage percentage correctly, you are not the only one having this problem. There is no solution yet. Microsoft should release a software update.How to successfully upgrade to Windows 10 October 2018 Update
The process of installing updates on Windows 10 has improved over time, but the large number of possible hardware configurations leads to errors. However, you can do simple steps to reduce the likelihood of such errors.Creating Backups
Although the likelihood of errors is small, something can still go wrong. Windows 10 has a rollback process for such situations, but it may not work. For this reason, it is always recommended to back up your system and user files.
A backup copy will help you return to a previous version of Windows if you do not have access to the rollback feature in the Settings application.
If the installation fails, you will not be able to boot your computer. If there are problems after installation, you can use a full copy of the system to restore your computer.
Remove unimportant apps
Incompatibility with applications is one of the main reasons for failure to update. If you don't know which application is at fault, start with classic desktop programs and antivirus programs. Apps are uninstalled in Settings > Apps > Apps & features. Select the programs you need and click on the “Uninstall” button.
In addition to incompatible applications, remove third-party antiviruses and other security programs. Naturally, it is not recommended to work for a long time without such protection. You can also disable Windows Defender Antivirus.
To do this, go to Settings > Updates & security > Windows Security> Open Windows Security > Virus and threat protection > Virus and threat protection settings > Manage settings. Uncheck the Real-time Protection switch. After installing the Windows 10 update, the antivirus will turn on automatically.
If you uninstall a third-party antivirus, reinstall it after installing the update.
Disabling the firewall
Sometimes built-in or third-party firewalls can cause problems during the update process. If you are using Windows Firewall or other software network protection, disable them before attempting to install Windows 10 updates.
To disable the built-in firewall, in the same Windows Security window, go to the Firewall and network security section and click on the section that is marked as Active. Turn off the Windows Defender Firewall switch.
Unblocking updates
There is a chance that you have made changes to the settings that may prevent the update from downloading automatically. In particular, in additional settings The update center may prohibit installation of major updates. Go to Settings > Update & Security > Windows Update > Advanced settings. In the "Choose when to install updates" section, Semi-Annual Channel (Targeted) and 0 days should be selected. The "Pause updates" switch must be disabled.
Disabling metered connections
If your connection is designated as metered, the Windows 10 update may not download automatically. You need to disable this restriction.If you have limited traffic, you need up to 5 GB to download updates. To disable a metered connection, go to Settings > Network & Internet > Status > Edit connection properties. Disable the switch in the "Metered Connection" section.
Disable unimportant peripherals
To avoid driver compatibility issues, disconnect all unnecessary peripheral devices from your computer. All you need is a monitor, mouse and keyboard. After installing the update, everything can be connected back.
Clean installation
If installing updates doesn't work, you can perform a clean installation. This will erase all data on the main partition of the hard drive. Before installation, transfer the files you need to another partition or disk. Using the Media Creation Tool, you can create an installation flash drive or disk.Conclusion
A major Windows 10 update released every six months is available for installation by all interested users. It is recommended to wait automatic installation, which will mean that your computer is compatible with new version. You can also take your time and wait a few weeks to make sure there are no problems with this update.Have you ever wondered why you have 32-bit Windows 10 on your computer? Your computer may be fully compatible with the 64-bit version of Windows. You need to upgrade 32-bit Windows to 64-bit if your computer has more than 4 GB of RAM, because 32-bit operating systems work with a maximum of 4 GB random access memory. Before updating, you need to make sure that this is possible.
Check for a 64-bit processor
You need to check if you have a 64-bit processor. This is the most important requirement for installing a 64-bit system. To do this, you need to go to the Start menu in Windows 10 (you can also press the WIN button on your keyboard) and go to Settings.
On the next screen, go to About. There you should see your software specifications as well as some options specific to your hardware. Since you want to upgrade from 32-bit Windows, next to “System type” you will see “32-bit operating system”.
If you see “x64 processor”, then you can upgrade. Unfortunately, if "x86 processor" appears in the window, you will not be able to upgrade from 32-bit to 64-bit Windows. However, most processors released in the last 5-7 years are 64-bit.
Windows Backup
Since you will be making significant changes to your operating system, it is important to make a full backup copy of Windows 10. An important note for upgrading from 32-bit to 64-bit Windows is that all your personal files, settings and applications are on the C drive: will be deleted. It's best to back up all affected files to an external drive.
Upgrade from 32-bit to 64-bit Windows
Upon completion of the process Reserve copy you can proceed to the installation step. To upgrade from 32-bit to 64-bit Windows, you need to perform a clean installation of the operating system. This means you can't just update Windows 10 and keep your files. First you need to create a , which you will use to install the 64-bit version of the operating system.
Once you have your Windows 10 boot drive, connect it to your PC and restart it. If the system boots as usual, then you need to change the boot order in the BIOS. Enter the BIOS using the Dell, F8 or F2 keys (depending on motherboards differently), find the Boot option and arrange the devices in such an order that the USB drive or disk with Windows 10 boots first.
If you do everything correctly, the Windows installer will launch. At some point, Windows will ask you for a serial key. If you have previously activated your system, you can skip this option.
On the screen where you have to select the installation type, go to “Custom: Install Windows Only (Advanced).” After clicking “Next” you must select the entire system partition and delete it. (guide by size, you need to remove drive C). All files on the specified partition will be deleted; for this we made a backup copy.
After clicking Next, Windows will continue installing the 64-bit version. I hope you were able to update your system. After updating, restore files from backup copy. If you encounter any difficulties, write in the comments. Good luck.
On another Patch Tuesday, Microsoft released cumulative update KB4464330 for Windows 10 version 1809 (October 2018 Update) based on x86, x64 (amd64), ARM64 and Windows Server 2019 (1809) for systems based on x64 processors.
Installation via Windows Update
Cumulative update 4464330 for PC is installed automatically through Windows Update. To check, go to Settings > Update & Security and click Check for updates. You will need to restart your computer to complete the installation. After the update, the Windows 10 build number will change to 17763.55.
Download update KB4464330
You can also download the update and install it manually from the link below:
Improvements and fixes for KB4464330 (17763.55)
This update includes quality updates. New system functions are not presented. List of key changes:
- Fixed an issue that affected the expiration date group policy“Delete user profiles after a specified number of days when the system is rebooted”, when incorrect time calculation could lead to premature deletion of profiles.
- Security updates for Windows kernels, Microsoft Graphics component, Microsoft Scripting Engine, Internet Explorer, Windows Storage and Filesystems, Windows subsystems for Linux, wireless connections Windows, Windows MSXML, Microsoft JET database engine, Windows peripherals,
You can download and install the final release of Windows 10 October 2018 Update (version 1809, build 17763.379) in several ways: through Windows Update, ISO images, or using the Media Creation Tool and Windows 10 Upgrade Assistant
Updated 03/29/2019: Official ones available for download Windows images 10, version 1809 build 17763.379 (KB4489899).
Microsoft has begun distributing the Windows 10 October 2018 Update for Windows 10, and users of the operating system who are not participating in Windows program Insider can finally get numerous new features. Note that the final release was Windows assembly 10 build 17763.
The update is now available for manual loading On October 2, however, after Microsoft stopped distribution of Windows 10 October 2018 Update (version 1809), the redeployment began on November 13, 2018. Microsoft offers several simple ways to get the feature update to Windows 10, version 1809. While most users are aware of them, let's recap the available options.
Method 1 – Using Windows Update
A special tool will help you update the system directly on your PC without creating installation media. To do this, just launch the utilities and select “Update this PC now.” detailed instructions available on our website:
Using the utility, you can also download an ISO image and create an installation DVD/USB flash drive, which will allow you to update one or more computers to version 1809, as well as perform a clean installation of the system. Use the following instructions:
This method will be very useful for users who do not want to rely on automatic updates through Windows Update, but decide to complete the update process themselves. The Media Creation Tool will allow you to receive the Windows 10 October 2018 Update on the first day of the update's release, because phased implementation does not apply to this method.
Method 3 – Windows 10 Upgrade Assistant
One of the easiest ways to upgrade to Windows 10 (version 1809) without waiting for automatic updates is to use the Windows 10 Update Assistant utility.
Launch the tool and follow the on-screen instructions to update to the latest version of Windows 10.
Method 4 – Download Windows 10 disk image (ISO file) from Microsoft website
Microsoft has released ISO images that will allow you to speed up the update and perform a clean installation of Windows 10 October 2018 Update.
On the page you can download a disk image (ISO file) that can be used to install or Windows reinstallation 10, as well as to create installation media using a USB flash drive or DVD.
Method 5 – Windows ISO Downloader
Windows ISO Downloader is a convenient tool from a third-party developer that allows you to download official images of Windows 10 (and other versions) Windows systems) directly from Microsoft servers.
To use this method, follow these steps:
- Download the application and run the downloaded file (the utility does not require installation):
- In the right menu on the "Windows" tab, select Windows 10.
- Next, in the “Select edition” drop-down menu, select the required edition to download Windows 10 version 1809, and click the “Confirm” button.
Note: In most cases, it is enough to select Windows 10 Home/Pro (includes Home, Single Language Home and Pro editions in one ISO image, directly selected during installation).
- Next, select the product language, for example, "Russian", and click the "Confirm" button
- On the "Downloads" page, click "32-bit download" or "64-bit download" depending on the required OS bit depth.
Method 6 – TechBench Service by WZT
The TechBench by WZT project allows you to download official Windows ISO images via direct links directly from Microsoft servers without tedious search and registration.
To use this method follow these steps:
Go to the project website using this link.
- Select type: Windows (Final)
- Select version: Windows 10, Version 1809 - Redstone 5 (build 17763.379)
- Select edition: Windows 10
- Choose language: Russian
- Choose File: Win10_1809Oct_v2_Russian_x32.iso or Win10_1809Oct_v2_Russian_x64.iso
- Click Download.
- By looking at the URL link of the downloaded file, you can verify that the download is coming from official server Microsoft. Links are valid for 24 hours from the moment of creation.
Note: The selected files include Pro, Home and Home editions for one language in one ISO image, directly selected during installation).
Method 7 – Rufus Utility
Rufus is a portable utility for creating bootable USB media from ISO images with the selected operating system.
To download Windows 10 October 2018 Update (version 1809) using this utility, you need to use Rufus 3.5 and higher.
- After launching the application, allow Rufus to check for updates automatically. Only in this mode will Rufus be able to download the Windows ISO image directly from the utility.
- Select a USB flash drive that will become your boot drive. Any flash drive with a capacity of 8 gigabytes or more will do.
- In the "Load Method" field, select the value Disc or ISO image (Select image).
- The “SELECT” button has a small arrow, when clicked you can switch to the “DOWNLOAD” mode.
- After clicking on the “DOWNLOAD” button, the ISO image download interface will launch. You need to select the parameters of your Windows ISO images 10 in the following order:
- Version: Windows 10
- Release: 1809 R2 (Build 17763.107 - 2018.10)
- Edition: Windows 10 Home/Pro or Windows 10 Education
- Russian language
- Architecture: x64 or x86
- After selecting your options, you will be prompted to select a location to save the ISO image, after which the download process will begin.
- Once the download is complete, Rufus can begin creating a boot disk.
Which method will you choose to download and install Windows 10 October 2018 Update? Share your choice and experience installing Windows 10 (version 1809) in the comments.
Loading...
