Programs for monitoring computer temperature. How to determine the temperature of the video card and processor. Permissible temperature of computer equipment during operation

Several ways to find out the temperature of the processor and video card on a laptop.

Navigation

Most users of desktop computers and laptops are aware of the fact that the overall performance and stability of the device directly depends on the temperature of the processor and video card. The higher the thermal load on the processor and video card becomes, the more clock cycles they begin to skip, thereby preventing the temperature from rising. Naturally, this leads to a significant decrease in the overall performance of the computer.

When a critical temperature level is reached in most processors and video cards, overheating protection is automatically triggered and the computer suddenly turns off. However, such protection does not guarantee 100% that when a critical point is reached, the processor and video card will not fail. Therefore, it is extremely important to be able to determine their temperature and control it online.

The main causes of laptop overheating and methods to combat it

Contamination of internal components

• The most common reason for overheating of the video card and processor is high dust content of the internal components. Despite the fact that the laptop case protects its insides well from dust, the device still needs to be cleaned periodically.
• In order to carry out the cleaning procedure, the laptop will need to be disassembled and carefully cleaned using damp sponges and cotton swabs. If you are an inexperienced user, then doing this yourself is highly not recommended. In the process, you can damage some cable or board and disable the device forever. It is best to take it to a service center or call a specialist to your home.

Thermal paste wear

• Thermal paste is a special substance with a thick consistency that is applied between the processor and the heatsink, preventing overheating. Over time, thermal paste may lose its heat-conducting properties, which will undoubtedly lead to overheating of laptop components.
• As in the case of cleaning dust, you can only replace thermal paste yourself if you have experience. Otherwise, it is highly recommended to take the laptop to a service center. You can buy thermal paste at any electronics store.

Damage to the cooling system (cooler)

• In a laptop, as in system units desktop computers, special fans are responsible for cooling. Their failure will undoubtedly lead to overheating of computer components. As a rule, “coolers” break due to dust accumulated inside them, or due to overheating.
• It is very easy to diagnose a cooling system malfunction by sound. If something prevents the cooler from spinning full power, the laptop will begin to make a crackling or buzzing sound. If it completely fails, only silence will be heard from the laptop case.

Wrong place to use laptop

• Many people like to use their laptop on their bed. However, most of them do not care about the fact that by placing the device on a soft surface, they block its air blower, as a result of which hot air accumulates inside the case and overheats the laptop components.
• The laptop should only be used on flat, hard surfaces. If you want to use a laptop in bed, then first it is strongly recommended to find a stand for it that will rise 5 to 10 centimeters above the soft surface.

How to measure the temperature of a laptop's processor and video card using AIDA64?

• Since the processor and video card are located inside the laptop case, it is impossible to measure their temperature with any physical devices. The only way is to use special software. There are many specialized programs that can monitor the thermal load on the processor, motherboard, video card and other computer components, but many of them give incorrect indicators and themselves place a very heavy load on the computer.

According to a large number of user opinions, today the best program there is a program for this purpose AIDA64 Extreme, which replaced the popular utility on the market Everest. On official website users are offered download a limited version of the program. To use the full range of its capabilities, you will need to pay a certain amount. However, you can easily find hacked full free versions on the Internet. To find out the temperature of the processor and video card using this program, follow these steps:

• Step 1. Download the program AIDA64 Extreme With official website or from any other source, install it on your computer and run it. In the left column, expand the tab " Computer" and go to the section " Sensors».

• Step 2. A window will open in front of you, where the temperature of each processor core will be displayed opposite the lines with the inscription “ CPU", as well as the temperature of each core of the GPU (video card) opposite the lines with the inscription " GMCH».

How to monitor the temperature of the processor and video card online using the Game Assistant program?

In some situations, it may be necessary to constantly display the temperature of the processor and video card on the monitor screen. For example, during games. Of course, you can get by with the program AIDA64, however, constantly minimizing the game window and looking at the indicators in the program is extremely inconvenient. Therefore, to monitor the temperature of computer components during gaming, it is best to use free utility Game Assistant, the Russian version of which can be download from the official website developer IObit. To check the temperature of the processor and video card using it, follow these steps:

• Step 1. Go to official site Game Assistant program, download, install and run the program on your computer. After launch you will be taken to a screen with installed games, from where they will be launched. Go to the " Temperature».

• Step 2. The selected tab at the top of the window displays the temperature of the processor, video card, motherboard and cooler rotation speed. Below the indicators are displayed in the form of a graph. In the right column, you can activate the overheating alert function and the temperature display mode during the game, as well as select in which corner the indicators will be displayed.

• Step 3. By default, the temperature in the program is displayed in Fahrenheit ( F). To establish the Celsius scale familiar to many ( C), you need to go to " Settings", go to the tab " Temperature", tick the line " Celsius" and press the button " Apply».

How to check CPU temperature using BIOS?

• If for some reason you decide not to use third-party software, then you can measure the temperature of computer components via BIOS. In this way it is impossible to obtain detailed information about how hot your device gets while gaming or running a heavy graphics application, but it is ideal for diagnosing problems with the cooling system.

• To find out the processor temperature in this way, you need to press a special key while the computer is booting to enter BIOS. Typically, the login function BIOS performs one of the keys F1–F12, depending on the motherboard model. Next you need to enter the section “ Hardware Monitor" and in the line " Current CPU Temperature» view the processor temperature.

VIDEO: How to find out the temperature of the processor, hard drive and video card?

The processor consists of billions of transistors. Each requires a little electricity to operate, but in total their energy consumption is not that small. As a result, it turns out that when the processor and video card are running, heat is always generated.

An increase in temperature does not entail anything good. This is not an engine in a car; overheating a PC is nonsense; almost all components in it “love” the cold. Heat accelerates component wear and reduces computing performance. Ideally, the cooler the processor, the better. If you cool it with liquid nitrogen to -150°C, it will work faster.

There is no “normal” temperature. It is important not to exceed the critical level, which is conventionally set at 85°C. Most often, heating above this mark triggers throttling - the automation will reduce the load on the processor so that it cools down. For the user, this will result in the computer freezing. A common example is that after 20-30 minutes of playing, the picture begins to twitch and the FPS “sags.”

What affects processor temperature?

Main factors:

1. Features of the kernel architecture. The processor in a smartphone and a computer differ in architecture. In the first case (ARM) it is simpler and causes less heating, but for the second option (x86) the opposite situation applies. Different generations of PC processors almost always differ not only in the number of transistors (the more there are, the stronger the heating), but also in the standards of the technical process (the lower it is, the lower the temperature). The development of computing equipment both promotes (the scale of the system increases) and hinders (the basic link of the system decreases in size) temperature growth.
2. Computational load level. The more operations the processor performs, the more electricity it consumes and, accordingly, it heats up. By running a ten-year-old toy on your computer, you will slightly load the system. The new game will be much more resource intensive. It will cause intense heating of both the central processor and video card.
3. Cooling system performance. Cheap laptops use low-power processors that don’t get particularly hot. There is enough passive cooling - the heat dissipates on its own, the manufacturer only provides sufficient radiator area. High-performance processors require forced cooling. Usually this is a combination of radiator + fan - cooler. More can also be used efficient systems liquid cooling. There are also efficient and silent passive cooling systems - they remove heat well due to the large mass of the radiator, the weight of which can exceed 1 kg. Important nuance— after the temperature in the room increases by 1°C, the processor usually heats up 1.5°C more than the previous level.

How to find out the processor temperature?

The operating temperature of the processor is easily determined by the sensor it is equipped with at the factory. This is a required component for the following reasons:

• Thermal sensor - “foolproof”. At the beginning of the 21st century, the situation with processors produced by AMD became textbook - they were not equipped with thermal sensors. As a result, many enthusiasts overclocked the core, it overheated and completely failed. Today this is almost impossible - if the critical temperature is exceeded, the chip will be forced to shut down to avoid destruction.
• The thermal sensor sets the optimal processor load level. In 1999, a typical new processor had 5-20 million transistors, and in 2019 there are 3-5 billion. Even taking into account the reduction in the technical process (transistors have become smaller), this requires a constant temperature regime in the correct range. Modern processors would not perform so many operations per second if reliable temperature data were available.

Thermal sensor information is read special utilities. At the same time, you can find out the temperature without programs:

1. Via BIOS (UEFI). This add-on runs before Windows boot. In new computers, a more functional modification is commonly used - UEFI, while in older computers BIOS is more common. In any case, you need to log in there before starting the OS. This is done by pressing a certain key or combination (Del, F12, F2, Ctrl+Alt+Esc) - an indication of the correct option will definitely be displayed on the screen. After entering the BIOS (UEFI), look for the following menus or lines: CPU Temperature, PC Health Status, Status, Hardware Monitor, H/W Monitor, Monitor. Sometimes the temperature is immediately displayed in the UEFI start window. This method is reliable, but the data will be received at a time when the computer is almost idle. Therefore, in most cases, such information has zero usefulness - usually the detected temperature is within the normal range. However, if the heating is significant (over 70°C), this indicates the ineffectiveness of the cooling system.
2. Using a pyrometer. This is a non-contact infrared thermometer that measures temperature with a special beam. The device needs direct contact with the surface, the heating of which is detected. The pyrometer does not use the processor sensor - it uses its own. This serves as a good check of the health of the temperature sensor in the PC, because its data is not always correct - it can fail. To measure the temperature with a pyrometer, you need to remove the cooler, which in itself will cause the processor to overheat. Therefore, a pyrometer is usually used by specialists to check the correctness of the temperature sensor readings.

Programs for monitoring the temperature of the processor and video card

Let's look at the features of popular utilities.

A paid program that provides all available information about the computer, including the temperature conditions of the processor and video card. If it is assumed that slow operation and unexpected reboots are caused by overheating, then you need to download and install trial version AIDA64. It works for 30 days, after which you will have to buy it. After a month of observation, you can determine whether the computer is overheating or not.

After launching the application, you need to go to the “Computer” menu in the left panel, and then to the “Sensors” line. Find the “Temperature” block in the right half of the window. There the current temperature regime of each processor core (CPU 1 Core 1, CPU 1 Core 2) and video card (GPU diode) will be indicated. May also display hard temperature disk and motherboard, but these components overheat relatively rarely. They are always cooler than the processor and video card.

Program for computer enthusiasts. With its help, you can fine-tune the voltage supplied to components, the speed of cooling fans, and other PC parameters. It is also perfect for temperature monitoring. To do this, you need to download and install it, and after launching, perform the following steps:

• After 10-15 seconds, the utility analyzes the equipment whose characteristics will be read.
• You need to click on the “Configure” button - a window will open, the first tab of which will be called “Temperatures”.
• Find the required temperature in the “Sample” column. Each processor core has its own sensor, and corresponding values will be displayed in the lines “Core 0”, “Core 1” and so on. If you are interested in heating the video card, you need to pay attention to the “GPU” line.

A simple utility that is convenient for testing your computer regarding overheating under load. After downloading and installation, it is best to proceed in the following sequence:

• Run the program. It is advisable that the PC is not turned on for a long time before this - this will improve the reliability of the observation.
• Enable something resource-intensive. This could be a game that occasionally drops frames, or playing a large 4K video file. Let the computer run in this mode for at least 20 minutes.
• Turn off the “heavy” application.
• Expand the HWMonitor window. In it, click on the line with the processor designation - it will start with “AMD” or “Intel”.
• Analyze changes. They are displayed for each core (lines Core #0, Core #1) according to three criteria. The “Value” column will indicate the current temperature, the “Min” column will indicate the lowest temperature, and the “Max” column will indicate the highest temperature since HWMonitor was launched. If “Min” is at least 70°C, and “Max” is at least 80°C, then this directly indicates poor cooling of the computer.

A free application that is available for download at this link. The interface and rules of use are the same as in the previous program - HWMonitor.

The utilities include paid and free version— to determine the temperature, the capabilities of the basic modification are sufficient. After downloading, installing and launching the application, you need to select “Central Processing Unit” in the left panel, and then find data on the heating level on the right. If you leave the program running for a while, and then open it again and click on the green square next to the temperature value, a graph will be displayed on which it will immediately become clear how the temperature regime has changed. Such data is useful to use after turning on a resource-intensive application. As a result, the stress test will perfectly demonstrate all the capabilities of the cooling system.

How to reduce CPU temperature?

In practice, 2 approaches are used:

1. Reduce processor performance. The easiest way to do this is by slightly reducing the voltage supplied to the chip. As a result, it will become a little slower, but it will also heat up less. If the PC usage scenario includes only browsing the Internet and watching videos, then with high probability a decrease in system performance of 10-15% will generally be unnoticeable.
2. Improve cooling (heat dissipation). We can look at this as an example: in a 2-3 year old computer, you can reduce the processor temperature by a couple of degrees through a simple operation - replacing thermal paste. This is a substance that is placed in a thin layer between the processor cover and the surface of the radiator. Thanks to thermal paste, heat is dissipated faster. Over the years, its thermal conductivity inevitably deteriorates, causing the processor to heat up a little more than usual. Using new thermal paste with higher thermal conductivity, you can definitely reduce the temperature. Other ways to improve cooling: cleaning the interior of the PC from dust, installing additional fans in the case, increasing fan speed. It all comes down to money - there are a lot of options on the market to suit any budget.

Previously, I wrote an article about what to do if . There can be many reasons for its appearance, and one of the most common is overheating. That is, the temperature of the video card is too high. And to exclude this reason, it needs to be checked.

Checking the temperature of the video card is carried out using special programs. There are quite a few of them, so only some of them – the most popular – will be discussed below. It is not at all necessary to use them all: just choose one - which one you like the most.

Free utility GPU-Z

Let's start with the GPU-Z utility. It's pretty simple program to check the temperature of the video card in Russian. Its main advantages:

• free;
• does not require installation;
• shows a lot of extra useful information(video memory frequency, cooler speed, etc.).

And most importantly: it’s easy to use. Download this program from. site and launch. Go to the “Sensors” tab and look at the “GPU Temperature” item. Hover your mouse cursor over it and you will see a hint (in Russian) of what it shows.

As you can see, in my case the video card temperature is 28 degrees (in idle mode). This is a wonderful indicator that proves that everything is fine with her.

By the way, using this utility you can view the temperature of the video card at the time of peak load. For example, during a game. But before launching it, click on the triangle icon and select the third item in the drop-down list - “Show Highest Reading”. Now the GPU-Z utility will show the maximum temperature.

Launch the game, play for about 30 minutes, then close it and see what the program shows. If the maximum temperature does not exceed 90 degrees, then everything is fine. At least there is definitely no overheating.

Functional program AIDA64

The program is paid (link), but there is a 30-day free period. Plus, it has powerful functionality and shows a lot of useful information. For example, you can use it to see the exact name of the RAM (to understand which one you need to purchase), etc. By the way, it is entirely in Russian.

AIDA64 also monitors the temperature of the video card. To view it, expand the “Computer” section and select “Sensors”. Here the line “GPU Diode” shows the operating temperature. In the screenshot below it is 28 degrees.

Convenient utility GPUTemp

Another program for measuring temperature is GPUTemp. It is intended only for this purpose and does not show any unnecessary information. Therefore, just launch it and look at the “GPU Core” item.

By the way, this program has one very convenient feature. If you hide it, it will show the temperature in the tray (near the clock).

Agree, this is very convenient. After all, this way you can see the temperature of the video card without opening the utility itself.

Free portable Speccy

Speccy is free, plus it even has portable version(does not require installation).

Launch the program, and in the main window you can immediately find out everything about your video card (and at the same time - processor, motherboard and hard drive).

What should the temperature of the video card be?

So, you installed one of the programs, looked at what it shows and... What's next? What is the normal temperature of a video card? How to understand: is it heating up or not?

The maximum permissible temperature of a video card differs slightly depending on:

• manufacturer (Nvidia and AMD);
• type of cooling (active and passive);
• operating mode (on the desktop or during the game).

Nvidia and AMD video cards can be either active or passive cooling. But overall, the overall picture is relatively normal temperature should be clear.

The video card on the laptop overheats: what to do?

What to do if you find that the video card on your laptop or computer is overheating? Urgent action needs to be taken:

1. Perform dust cleaning. Most often, overheating occurs due to its large amount. Therefore, it is recommended to disassemble your PC or laptop to clean it from dust.
2. Check the condition of the thermal paste. It is responsible for cooling the video card. Therefore, when it dries out, the GPU temperature will increase sharply even in idle mode. In this case, you need to apply a new layer of thermal paste.
3. Check coolers. They may be faulty or perform poorly due to dust.
4. Check the power supply. If it is faulty, it can lead to problems with the video card (i.e. overheating).

If you can do it all yourself, great. If not, ask your friends or service center for help.

There are very often questions on the Internet: why the computer reboots on its own, causing the device to freeze and turn off immediately, what to do if the monitor does not work stably.

The first thing you think about is the presence of viruses, but in most cases the problem is overheating of the processor or video card. In this article we will look at practical and easy to use software for displaying temperature indicators.

Monitoring CPU temperature - why?

The temperature of the processor or video card in operating condition is constantly changing. Overheating may cause your computer or laptop to suddenly shut down, resulting in data loss. Therefore, if you want to avoid critical temperatures and prevent equipment damage, you must use special software. With their help, you can monitor the heating temperature of the processor, video card, and hard drive while they are operating.

Programs for checking processor temperature

You can check the temperature by going into the BIOS. To do this, you need to restart the operating system; while turning on the computer, press the “F2” or “Delete” key, depending on the version of the device. After entering the BIOS, you need to find the “H/W Monitor” section and select it. After which, the temperature indicators of the hardware components will be displayed.

The main disadvantage is that there is no way to see the temperature while the computer is running and its load. Therefore, next we will look at the most useful software products.

HWMonitor

"HWMonitor" is a program for monitoring the temperature of the processor and video card. It also allows you to find out the fan speed and voltage data. This program can be downloaded from the official website.

To measure the processor temperature:

1. Launch the program.
2. After launching the application, all main devices will be displayed: processor, HDD, integrated and discrete video card, laptop battery.
3. Having opened all processor items, the current maximum and minimum temperature values ​​collected during PC operation will be displayed. The following points relate to the processor: voltage, temperature, load level, as well as its frequency.
   
4. About the hard drive, only its temperature is indicated.
   
5. Next come integrated and discrete video cards. The program shows the temperature and frequency for the integrated one; in the discrete mode, load is displayed instead of frequency.
   
6. The battery item is indicated only for a laptop; the voltage consumption, power and battery wear levels are displayed here.

AIDA 64 Extreme Edition

"AIDA 64 Extreme Edition"is an extensive complex of diagnostics and testing of computer hardware components. The program has many features:

• real-time monitoring of computer hardware and system components;
• computer hardware testing;
• diagnostics of components for problems and errors;
• analysis of systems and application programs;
• Monitoring temperature, voltage and fans.

It should be said that the program is paid. Its trial version is limited to 30 days of use - this is the main disadvantage.
This utility can be downloaded from the official website. Checking the processor temperature is as follows:

1. After installing the program, launch it by double-clicking on the shortcut.
2. In the window that opens, double-click on the “Computer” item and select “Sensors” from the list that opens.
3. Detailed information will open about all components of the computer equipped with a temperature sensor, including the main ones: “CPU” (Central Processing Unit) and “GPU” (Video Card).

MSI AfterBurner

MSI AfterBurner is a multifunctional utility that is aimed at monitoring video card performance. It is often used by gamers to overclock the graphics card and monitor the following indicators:

• increasing memory clock speed;
• cooler rotation adjustment;
• FPS monitoring (a number indicating how many times per second GPU updates the image);
• notification of increased critical temperature values.

Download this program You can go to the developers' website using this link. Let's look at the main parameters of the program:

What to do if the temperature is elevated?

The normal temperature during operation of the processor is considered to be up to 60 degrees, for a video card - up to 80 degrees.

If you find a problem with devices overheating, then consider the primary solutions:

1. First, turn off your computer or quit the program that is causing it to overheat.
2. It is necessary to ensure that the coolers are well blown out and completely clean the computer from dust.
3. Temperature reduction environment. Often, high room temperature affects the temperature of the computer hardware. To get out of this situation, you can use an air conditioner or fan.
4. Installation more powerful system cooling. Installing additional coolers for the processor and video card will solve the problem. You can also use stands for a device with a cooling system.

But the safest and most correct advice would be to take your computer to a service center for full diagnostics and further repairs or cleaning. This is where the review of products ends, if you know more convenient and high-quality software solutions, write in the comments.

If you have Personal Computer or a laptop, then every day you have to deal with a wide variety of programs: browsers, Word, programs for viewing images and videos. But there are programs that you might not have come across - programs that show the temperatures of the processor and video card.

So why do you need a program that shows the temperature of the GPU and CPU?

The first and probably the most basic reason why you intend to monitor the temperature of your PC is the suspicion that your hardware is overheating. After all, the most harmless outcome from a break is a slowdown in your system. Well, the most serious outcome from overheating is the failure of your processor, video card, north bridge, hard drive or motherboard. This is why it is so important to know and monitor your system temperature.

Top programs that allow you to monitor the temperature of your PC components

It’s worth discussing right away what temperature is normal? In case of computer downtime, work on the Internet, text editors or when watching movies, the nominal temperature is considered to be between 40-60 degrees. If your PC or laptop is subject to heavy loads: gaming or video editing, then the temperature of the GPU and CPU should not exceed 70-80 degrees. If your performance is outside these limits, you may need to clean the cooling cooler from dust and replace the thermal paste on the processor and video card.

IN this list I posted the programs based on my quite reasonable, albeit subjective opinion:

AIDA64 Extreme Edition

This program shows the temperature of the processor and video card, as well as all necessary information about hardware and software your his desktop computer or laptop that work on all versions operating system Windows. Aida 64 is loved by many users for its simplicity in settings, as well as versatility.

In order to find out the temperature of your PC, you will need to launch this program, then on the main page select the “Computer” icon, and then “Sensors”.

That's all, so in just three simple clicks you can find out if your PC is overheating.

Well, in order to find out detailed information about each component of your PC, return to the main tab of the utility, then click on “Computer”, and then on “Summary information”.

Done, now you can examine the parameters of your computer in detail.

Another plus is that you can display information about the temperature of your PC on your computer desktop. To do this, go to the program settings, then open the “OSD” tab, and then “On-Screen Menu Elements”.

After this, your PC will be scanned and in the list that appears, you can mark absolutely any parameter that you want to be displayed on your desktop. Now go back and check the box next to “Show OSD panel”.

In addition to all this, Aida 64 can control the rotation speed of the cooling cooler, as well as conduct all kinds of component performance tests, scan the system for faults or compatibility, and much more.

Important: carry out load tests and independently control the rotation of the cooler without studying additional information not advisable.

Advanced SystemCare Ultimate (with Antivirus)

This utility is not entirely intended for temperature monitoring, or rather, this is not its main task.

But I chose it for a reason and now you will understand why.

First things first Advanced System Care Ultimate is designed to monitor and troubleshoot your system: boot optimization, registry cleaner, junk removal, disk and system optimization, spyware removal and much more. In addition, Advanced SystemCare Ultimate has implemented powerful antivirus BitDefender.

One way or another, all these parameters affect the temperature of your PC. After all, if these parameters do not work correctly and load accordingly CPU, borrow precious RAM, then it is likely to overheat soon. Well, as for the antivirus, it will protect your system from the penetration of malware, which can “eat up” the CPU frequency, as well as RAM.

A worthy advantage is that this program can independently monitor the condition of your laptop, identify its malfunctions or vulnerabilities, and then fix it.

To find out the temperature of the CPU, GPU, motherboard, as well as fan speed, you don’t even have to do anything literally additional actions– the program has already brought their indicators to the desktop. Find the program widget in the upper left corner of your screen.

Done, now you see not only the desired temperature, but also their workload.

If after this you do not minimize the “Window” of the program, then the next time Windows startup and further loading it completely, this monitoring “Window” will break off automatically.

A lightweight and easy-to-use utility that will run even on “Calculators”. First of all, the program is designed to take temperature readings from sensors, as well as to regulate fan speed when the load on the processor or video card increases.

To view all the indicators that you need, you just need to launch the program, that’s all - all the information is on the main Speedfan tab.

A big advantage over other utilities is its ability to regulate the cooler speed of absolutely any component in your PC, be it a cooler on a video card, processor, or even a hard drive.

Programs worth mentioning

The following programs are either analogues or, to one degree or another, substitutes for those listed above.

Speccy and Everest Ultimate Edition

We can say that these two programs are analogues of Aida 64, lighter and slightly stripped-down analogues. However, with their help you can also monitor the temperature of absolutely all components of your PC, as well as carry out the necessary stress tests of your hardware.

HDD Temperature

Quite useful utility, which monitors the temperature of your hard drive and notifies you if a high temperature that is dangerous for the hard drive is detected. Best Feature of this utility (as for me), this automatic shutdown PC at the highest possible temperature.

Core Temp and Real Temp

Two lightweight utilities designed to determine the temperature of Intel processors only.

Conclusion

Every user who values ​​​​his equipment should have at least one utility installed that allows him to quickly and accurately determine the temperature of the video card and processor. After all, it’s better to be on the safe side than to pay a hefty sum for repairing your hardware.

Important: unfortunately, it is not possible to measure your temperature online.

In contact with