Good afternoon, dear readers of the blog site. Very often, after incorrect user actions, the computer stops loading normally. This may be caused by changes in settings, as well as the removal of necessary software. In one of my articles I talked about how to restore Windows 7 from a flash drive, and in this article I will try to talk in more detail about this process.
Before you restore the system from a USB drive, you need to get a bootable flash drive; you can read about how to make one.
So, let's move directly to the description of the process.
Selecting the device from which the system will boot
The first step is to choose how we will launch. To do this, when you boot your computer, you need to go to the Bios settings.
On different models Laptops and desktop computers enter Bios differently, but most often this can be done by periodically pressing the Del key. If you were unable to log in this way, then when starting the computer, carefully read the information displayed at the bottom of the screen; it should indicate which key combination is used to enter Bios.
After getting into Bios, go to the menu Boot/BootDevicePriority and set where the system will boot from. Accordingly, to boot from a flash drive, select USB HDD. Save all settings and restart the computer.
Another way to select a download location is to periodically press the F11 key when the computer starts, if this function is supported by your motherboard, then as a result you will see a small window in which you can choose from which media to boot. The selection is made by moving the field using the arrow keys on the keyboard and then pressing the Enter key.
System recovery process using a bootable USB flash drive
After we have chosen which media will boot from and rebooted the computer, before starting the system we insert a bootable USB flash drive. Upload process system files may take some time, causing you to see a window with installation options.
Here, in principle, you don’t need to change anything, just click the Next button. In the next window, select “System Restore”.
Well, continue as usual. Select the disk and next step select a restore point. Try to choose the earliest restore point, since you cannot fully understand at what point the changes made to your computer affected its correct operation.
It happens that there are no saved points and to avoid this, you need to , otherwise, without it, restoring Windows 7 from a flash drive will be very problematic.
The last step is to start the process, after which the computer will ask you to reboot for all changes to take effect. Don't forget to remove the bootable USB flash drive from your computer and return all changes to their previous form in the Bios settings.
In fact this process It’s completely uncomplicated and there’s nothing to be afraid of. But if you are not sure about something, write your questions in the comments, where you will definitely receive detailed answers.
Windows 7 can't always be cured using standard methods without using additional bootable media. The most convenient option is to use a bootable flash drive as the latter, which is written both by the OS’s own tools and by third-party utilities. Also, before performing the recovery procedure, you must prepare the BIOS accordingly.
Creating a bootable USB flash drive for Windows 7
The easiest way to make a bootable drive is offered by Microsoft in its Windows 7 USB/DVD Download Tool. It is downloaded from the company’s website and also requires Microsoft to be installed to work. NET Framework 2.0 and OS ISO image. To create bootable media using this utility, do the following:
This is just one way to create a USB drive to solve system problems. It can also be written using UltraISO programs- although paid, but with trial period.
Using UltraISO for boot drive
After installing and launching the program, the user will be required to do a minimum of actions to burn the installation media:
Preparing a laptop or PC for working with a USB drive
Modern devices allow inexperienced users to not have to go into the BIOS to be able to boot from something other than hard drive. For this, there is a boot menu, which is usually called up with the F12, F10, F8, etc. keys (depending on BIOS version and board manufacturer) immediately after switching on. F12 is most often used on laptops.
If this mode is not available to you, you will have to change the BIOS settings.
You can usually enter the configuration change window by pressing the Del key before loading Windows. In the window that opens, you will need to select an item that may be called Boot, Boot Menu, Boot Manager, etc., and then change the boot priority from HDD to USB.
Restoring Windows 7
After loading information from the USB drive, the OS installation window will open. It is possible to reinstall the system, but this method should be reserved for the most extreme case, since some or all of the user information on the disk may not be saved after this, and a lot of time will be spent on reinstallation. Therefore, first try to restore Windows using the means that you have:
Here are several remedies that often help cure the system even with very severe failures.
Startup recovery
This remedy also works in automatic mode and is often unable to provide regular work. However, she often manages to solve problems that may arise during installation previous versions OS, for example, XP as a backup along with “Seven”.
In this case it is rewritten boot record MBR and newer OS simply won't boot. After launching this utility, if a problem is detected, the user will see a window prompting them to fix it. After rebooting, the system can be started as expected.
System Restore
This item involves returning the OS configuration to one of the previously saved states, i.e., with its help you can roll back to the last or earlier checkpoints. For this.
Often computer users Windows control 7 encounter performance issues operating system. Problems with your computer usually appear when it slows down a lot and programs won’t open. Also, the computer may not start at all or may do so every once in a while.
The reasons that cause problems in the performance of the operating system can be very different. For example, if a computer gets hit virus, it can damage system files. Also, difficulties with the PC may appear during installation low-quality software, which can damage the structure of system files. To solve a problem with the performance of a computer on Windows 7, you need to roll back to the previous one. recovery point.
To protect the OS, Windows 7 uses restore points that the system periodically creates. Essentially, restore points are previous system state Windows files 7 . To help Windows 7 PC users, we have prepared material that will describe the detailed process of restoring the system in various ways.
Restoring performance in a busy seven
If your computer running Windows 7 boots, but the system is not stable, then it's time to roll back to a previous restore point. First of all, we need to get to the window where we can call up the system recovery options. To do this, open the program “” by pressing the key combinations Win + R, through which we enter the following command: systempropertiesprotection
A window should open in front of us “ Properties of the system" on the " tab System protection" You can also get to this window in the standard way through the menu “ Start". The next action is to press the button Recovery….
After clicking, the System Restore window will open. It will ask you to restore the system using a recommended access point or select another one. We'll stop at recommended restore point.
This window requires confirmation for the selected recovery. To confirm, click the Finish button.
This button will bring up a message warning that after the recovery procedure it will be impossible to return to the previous parameters of the seven. By clicking Yes in the message, we will begin the recovery Windows systems 7.
If the process of returning to previous state occurred without errors, a corresponding message will be displayed.
If you are unable to roll back to previous settings using the recommended point, you should select the point that was created later than the selected restore point Windows 7 systems. I would also like to note that to perform this operation you will need special privileges. That is, when you log in, you must select an account admin and enter a password for it.
Restoring the computer's functionality when the OS starts
If your PC is running seven at all is not downloading, then you can start the operating system in safe mode . After the BIOS start window appears, press F8 on the keyboard (for laptops there may be another key, for example, Del or one of the function keys). This action will cause menu alternative options loading seven.
In this menu, select the item “ Safe mode" and continue by pressing Enter, after which the system will start in safe mode.
If the system successfully started in safe mode, then start restoring the seven, as shown in the previous example. In this mode to ensure maximum security many functions disabled OS, including graphics Windows interface Aero. This is what it will look like running program"" with the command " systempropertiesprotection"on a system running in safe mode.
We return the computer to functionality using an installation disk or bootable USB flash drive
If the previous two examples do not help you, then you will need to restore seven installation disk or flash drive. For computers that do not have an optical drive, you need to use a bootable USB flash drive with the OS. You can create a bootable USB flash drive using special utilities. The most popular utilities for this purpose are Windows USB/DVD, Download Tool And Rufus.
Boot from installation disk or via a flash drive. In the installer start window, click Next and proceed to the next window.
After searching, select the OS you want to restore and click Next.
In the window that appears, select the same item “ System Restore».
This action will launch the Seven recovery utility. In the utility, click Next. This action will take you to list of recovery points. Let's choose a suitable point and continue.
A window will appear in front of you, as in the first example. Therefore, we click the Finish button and respond to the message, after which we will start the recovery.
After a successful rollback to the previous state, you will receive a message like this.
Emergency recovery of Windows 7 using antivirus
If your PC is infected viruses, interfering proper operation computer and the first three examples considered do not help you, then in a good way recovery in this case will be an anti-virus life disk from Dr.Web. With this disc you can clean the system of all types of dangerous software. In addition to cleaning, Dr.Web LiveDisk will be able to cure infected objects, which are necessary to restore Windows 7.
The Dr.Web LiveDisk image can be used to record to optical disk, and to a flash drive. To use Dr.Web LiveDisk on USB drive, you will need special program. You can download the program for recording onto a flash drive and the image itself on the official website by going to www.freedrweb.ru/livedisk.
Let's run the recorded image on disk, setting it to boot first in the BIOS.
In the bootloader start window, select first item Dr.Web LiveDisk and press Enter. These actions will start loading Dr.Web LiveDisk.
After downloading Dr.Web LiveDisk, we will get a full-fledged operating system on Linux based. As written earlier, the main purpose of Dr.Web LiveDisk is to clean and treat virus software. Therefore, this OS has a built-in antivirus Dr.Web CureIt!. This antivirus runs with the OS.
Click on Dr.Web CureIt! button Start scan, which will start scanning, cleaning the system and disinfecting viruses.
After checking, Dr.Web CureIt! will remove or cure infected objects.
Since there will no longer be in the system malicious code, you can safely restore the system in the three ways described above.
If, after checking the system files, you are unable to restore your Windows 7 system, then the only reasonable solution would be to make a complete backup of the information and reinstall the system again.
How to make a system image in seven
Another recovery feature in Windows 7 is creating a system image. In this image, you can save all the information on your hard drive, including the operating system. After restoring using this method, you will receive an OS with the same parameters as on the day the image was created.
Run " Control Panel" and go to the tabs " system and safety», «»
In the window that opens to create an image, indicate the location to save it and click Next.
In the window that appears, all that remains is to click the Archive button, which will start the image creation process.
Restore the created image with Windows 7 and all information on local disks using the installation disc. The recovery principle is shown in the second example, only when choosing a recovery method you need to select " Restoring a system image" and indicate its location on the saved drive.
Alternative methods to restore the Windows 7 operating system
In addition to standard recovery methods, there are alternative software that perform the same function. The most interesting solution that allows you to perform system recovery is a program Acronis True Image 2016. This is branded software package Acronis company.
First of all, download and launch Acronis True Image 2016 from a shortcut on the Desktop. When launched, the program will ask for a name and password.
Now let's set it up Acronis True Image 2016 so that he can do backup of the entire disk with Windows 7 OS. This setup should be done immediately after installing the OS, so that during the process using Windows you were able to restore functionality from several backup copies of the system created during a certain period of time. So, let's start setting up. To do this, select the storage type by clicking on the “” link.
In the window that opens, select the storage “ Acronis Cloud».
Now let's create a schedule for our backups. To do this, press the button “ Options" and let's move on to the storage settings settings. On the first tab, select the schedule you like for creating backups of our system.
As you can see, the entire computer is selected as the backup source. Therefore, in the schedule we set, a backup copy of the system will be created in cloud storage " Acronis Cloud».
For an example of recovery, let's take an archive copy not from cloud storage"Acronis Cloud", but from the hard drive. If you have created a backup copy on your computer, then Acronis True Image 2016 will find her himself.
So we press the button Restore your computer, after which the program will completely restore the system to the state it was in when it was created backup copy. Also, if you are unable to carry out Windows start 7 on the computer Acronis True Image 2016 There is a boot image for this that can be burned to disk.
You can download this image from your account page. You can obtain a password and login on the official website www.acronis.com. The principle of operation of the bootloader is the same as with the desktop version. Load disc from Acronis True Image 2016 on your computer you can by setting it in the BIOS first when booting.
From the example it turns out that the utility allows Full control over the creation of PC recovery copies and back up your entire system to the cloud.
An example of launching an Acronis True Image 2016 boot disk
To launch the disk Acronis True Image 2016 When the system starts, you must set the boot mode to optical drive first in BIOS. For example, for maternal MSI boards A58M-E33 these parameters in BIOS mode look like this.
Another boot method is to use hotkeys to call up the drive boot menu in the BIOS. For example, for motherboard MSI A58M-E33 hotkey is the F11 button. By pressing this button, we will launch a special mode in which, when the system starts, it will open drive boot menu in BIOS.
Booting from Acronis disk True Image 2016, we will be taken to such a menu.
In this menu you need to select Acronis True Image 2016, after selection the program will start.
The example shows that launching a boot disk Acronis True Image 2016 by using desired mode The BIOS is not complicated at all.
Let's sum it up
In this article we have discussed almost all the methods and parameters system recovery. We also looked at ways to restore the seven to alternative software and using an antivirus. Which method to choose to restore Windows 7 depending on the situation is up to you.
To summarize, I would like to note that they mainly disrupt the operation of the OS viruses and experiments with different illegal software. Therefore, so that you do not have to constantly restore the system, use only proven and licensed software, and also use reliable comprehensive anti-virus protection.
I would also like to note that the examples discussed in the material will work not only on Windows 7, but also on more modern operating systems, such as Windows 8 And 10 . And we, in turn, hope that our material will allow you to properly restore Windows 7 and you can confidently say that I can perform a system restore.
Video on the topic
Good day!
No matter how reliable Windows is, sometimes you still have to deal with the fact that the system refuses to boot (for example, the same pops up), slows down, glitches (note: all sorts of errors pop up) etc.
Many users solve such problems by simply reinstalling Windows (a reliable method, but quite long and problematic)... Meanwhile, in most cases, you can quickly fix the system using Windows recovery (fortunately, such a function is included in the OS itself)!
In this article I want to look at several options for restoring Windows 7.
Note! The article does not discuss issues related to computer hardware problems. For example, if after turning on your PC nothing happens at all (note: more than one LED is off, you can’t hear the sound of the cooler, etc.), then this article will not help you...
1. How to roll back the system to its previous state (if Windows has booted)
If Windows has loaded, then that's half the battle :).
1.1. With the help of special recovery wizards
By default, Windows has system checkpointing enabled. For example, you install new driver or some program (which can affect the operation of the system as a whole) - then “smart” Windows creates a point (i.e., remembers all system settings, saves drivers, a copy of the registry, etc.). And if problems arise after installing new software (note: or during a virus attack), then you can always return everything back!
To start recovery mode - open the START menu and search bar enter “recovery”, then you will see the required link (see screenshot 1). Or there is an alternative link (option) in the START menu: start/standard/system/system recovery.
Screen 1. Starting Windows 7 recovery
Note! Restoring the OS does not affect documents, images, personal files, etc. Recently installed drivers and programs can be removed. The registration and activation of some software may also fail (at least for the one that was activated and installed after creating a checkpoint, with the help of which the operation of the PC will be restored).
Then comes the most crucial moment: we need to select the point to which we will roll back the system. You need to select the point at which Windows worked as expected for you, without errors or failures (it’s easiest to navigate by dates).
Note! Also check the box " Show other restore points". For each restore point you can see which programs it will affect - there is a button for this. Find affected programs«.
When you select a point to restore, just click “Next”.
After which all you have to do is confirm the OS restoration (as in screenshot 4). By the way, when restoring the system, the computer will restart, so save all the data you are currently working with!
After restarting the PC, Windows will “roll back” to the desired restore point. In many cases, thanks to such a simple procedure, it is possible to avoid many problems: various screen blockers, problems with drivers, viruses, etc.
1.2. Using the AVZ utility
An excellent program that doesn’t even need to be installed: just extract it from the archive and run the executable file. It can not only scan your PC for viruses, but also restore many parameters and settings in Windows. By the way, the utility works in all popular Windows: 7, 8, 10 (32/64 bits).
Screen 4.1. AVZ: file/recovery.
By the way, the list of restored settings and parameters is quite large (see screenshot below):
- restoration of launch parameters of exe, com, pif files;
- resetting Internet Explorer protocol settings;
- recovery home page Internet browser Explorer;
- reset Internet search Explorer;
- removing all restrictions for the current user;
- restoring Explorer settings;
- removing system process debuggers;
- unlocking: task manager, system registry;
- cleaning Hosts file(responsible for network settings);
- removing static routes, etc.
2. How to restore Windows 7 if it won't boot
The case is difficult, but we will fix it :).
Most often, the Windows 7 boot problem is associated with damage to the OS bootloader, or a malfunction of the MBR. To return the system to normal operation, you need to restore them. More on this below...
2.1. Computer Troubleshooting / Last Known Good Configuration
Windows 7 is quite a “smart” system (at least compared to previous Windows). If you haven't deleted hidden sections(and many don’t even look or see them) and your system is not “Start” or “Initial” (in which these functions are often not available) - then if you press it several times when turning on the computer F8 key, you will see additional download options .
The bottom line is that among the boot options there are two that will help restore the system:
- First of all, try the item “ Last Known Good Configuration". Windows 7 remembers and saves data about the last time you turned on the computer, when everything worked as expected and the system was loaded;
- if the previous option did not help, try running “ Troubleshooting your computer«.
2.2. Recovery using a bootable USB flash drive
If nothing works and the system still does not work- then for further Windows recovery we will need an installation flash drive or disk with Windows 7 (with which, for example, this OS was installed). If it doesn’t exist, I recommend this note, it tells you how to create it:
To boot from this bootable flash drive(disc) - you need to configure the BIOS accordingly (more about setting up the BIOS -), or when turning on the laptop (PC), select the boot device. Also, how to boot from a flash drive (and how to create one) is described in detail in the article about installing Windows 7 (especially since the first step in recovery is similar to the installation step :)).
The Windows 7 installation window has appeared... What's next?
In the next step we choose not to install Windows, but to restore! This link is located in the lower left corner of the window (as in screenshot 7).
After you follow this link, the computer will search for OSes that were previously installed for some time. After which, you will see a list of Windows 7 operating systems that you can try to restore (usually there is one system). Choose the right system and click “Next” (see screenshot 8).
- Startup recovery- boot recovery Windows entries(MBR). In many cases, if the problem was with the bootloader, after working with such a wizard, the system begins to boot normally;
- System Restore- system rollback using checkpoints (discussed in the first part of the article). By the way, such points can be created not only by the system itself in auto mode, but also by the user manually;
- Restoring a system image- this function will help you restore Windows from a disk image (if, of course, you have one :));
- Memory diagnostics- testing and verification random access memory(useful option, but not within the scope of this article);
- Command line - will help to carry out manual recovery (for advanced users. By the way, we will also partially touch on it in this article).
Let's look at the steps in order that will help return the OS to its previous state...
2.2.1. Startup recovery
See Screen 9
This is the first thing I recommend starting with. After launching this wizard, you will see a problem search window (as in screenshot 10). Through certain time The wizard will report whether problems were found and resolved. If your problem is not resolved, move on to the next recovery option.
2.2.2. Restoring a Previously Saved Windows State
See Screen 9
Those. roll back the system to a restore point, as in the first part of the article. Only there we ran this wizard in Windows itself, and now using a bootable flash drive.
In principle, after selecting the bottom option, all actions will be standard, as if you had launched the wizard in Windows itself (the only thing is that the graphics will be in the classic Windows style).
The first point is to simply agree with the wizard and click “Next”.
Screen 11. Recovery Wizard (1)
Screen 12. Restore point selected - Restore Wizard (2)
Then you confirm your intention to restore the system and wait. After rebooting the computer (laptop), check the system to see if it boots.
Screen 13. Warning - Recovery Wizard (3)
If the restore points did not help, the last thing you can do is rely on the command line :).
2.2.3. Recovery via command line
See Screen 9
Command line- there is a command line, there is nothing special to comment on here. After the “black window” appears, enter the two commands below in sequence.
To restore the MBR: you need to enter the command Bootrec.exe /FixMbr and press ENTER.
To restore the bootloader: you need to enter the command Bootrec.exe /FixBoot and press ENTER.
By the way, note that on the command line, after executing your command, the response is reported. So, for both commands above the answer should be: “ Operation completed successfully". If you get a different response from this, it means the bootloader was not recovered...
PS
If you don’t have restore points, don’t despair, sometimes you can restore the system like this: .
That's all for me, good luck to everyone and a quick recovery!Thanks in advance for any additions on the topic.
Restoring Windows 7
Startup recovery
System Restore
recoverit.ru
Restoring windows from a flash drive
Windows 7 cannot always be cured using standard methods without using additional bootable media. The most convenient option is to use a bootable flash drive as the latter, which is written both by the OS’s own tools and by third-party utilities. Also, before performing the recovery procedure, you must prepare the BIOS accordingly.
Creating a bootable USB flash drive for Windows 7
The easiest way to make a bootable drive is offered by Microsoft in its windows utility 7 USB/DVD Download Tool. It is downloaded from the company's website and requires installation of Microsoft .NET Framework 2.0 and an OS ISO image to work. To create bootable media using this utility, do the following:
This is just one way to create a USB drive to solve system problems. It can also be recorded using the UltraISO program - although it is paid, but with a trial period.
Using UltraISO for boot drive
After installing and launching the program, the user will be required to do a minimum of actions to burn the installation media:
Preparing a laptop or PC for working with a USB drive
Modern devices allow inexperienced users to not have to go into the BIOS in order to be able to boot from something other than the hard drive. For this purpose, there is a boot menu, which is usually called up by pressing the F12, F10, F8, etc. keys (depending on the BIOS version and the board manufacturer) immediately after turning it on. F12 is most often used on laptops.
If this mode is not available to you, you will have to change the BIOS settings.
You can usually enter the configuration change window by pressing the Del key before loading windows. In the window that opens, you will need to select an item that may be called Boot, Boot Menu, Boot Manager, etc., and then change the boot priority from HDD to USB.
Restoring Windows 7
After loading information from the USB drive, the OS installation window will open. It is possible to reinstall the system, but this method should be reserved for the most extreme case, since some or all of the user information on the disk may not be saved after this, and a lot of time will be spent on reinstallation. So first try to restore windows means that you have:
Here are several remedies that often help cure the system even with very severe failures.
Startup recovery
This tool also works in automatic mode and is often unable to provide normal operation. However, she often manages to solve problems that may arise when installing previous versions of the OS, for example, XP as a backup along with the “Seven”.
In this case, the MBR boot record is overwritten and the newer OS simply does not boot. After launching this utility, if a problem is detected, the user will see a window prompting them to fix it. After rebooting, the system can be started as expected.
System Restore
This item involves returning the OS configuration to one of the previously saved states, i.e., with its help you can roll back to the last or earlier checkpoints. For this:
- Open the appropriate item, after which a new window will appear. It will display the last of all the points that Windows was able to create.
- You can select an earlier one if you check the box that allows you to show all points.
- Click “Next”, in the next window - “Finish”, after which the OS will roll back to the restore point you selected.
If there is not only boot disk, but also a system image that you store on separate media or in another partition of the hard drive, then you can use the “Restore system image” item. With its help, you can not reinstall Windows, but deploy the image along with all the drivers, programs, etc. installed at the time it was recorded. To do this, in the appropriate windows you simply need to indicate the location of the image and the disk to which it needs to be deployed.
If you're having trouble starting your OS and suspect a corrupted Windows bootloader is to blame, here's how to fix the problem manually.
Restoring the Windows 7 bootloader may be necessary (or at least worth trying) in the following cases: if Bootmgr is missing or Non system disk or disk error errors occur; In addition, if the computer is locked, and a message demanding money appears before Windows starts loading, restoring the MBR (Master Boot Record) can also help.
- Open the list of funds windows recovery and select "Command Prompt".
- Enter the "Bootrec" command and see a list of all available requests.
- Try sequentially entering two commands - “Bootrec.exe /FixMbr” and “Bootrec.exe /FixBoot”. After entering each command, do not forget to press Enter.
- Type “Exit” to exit and restart your computer.
With these commands you will overwrite the MBR and create a new boot sector. However, if these steps do not help, you can try another method:
- Open the command prompt again through the windows recovery tools.
- Enter the command "Bootrec.exe /RebuildBcd".
- When a system is detected, press "y" to add it to the boot list.
After exiting the command prompt using the "Exit" prompt and rebooting your computer, you should find your system running correctly.
Windows resuscitator
WinPE 10 Sergei Strelec x86/x64. This resuscitator can be used to restore Windows, diagnose a computer, windows installations, creating backups, removing viruses and much more. In addition, it can be written to a disk or USB flash drive/media. More detailed information about WinPE 10 can be obtained from the website http://sergeistrelec.ru. There is also a FAQ where you can get all the answers to your questions about the resuscitator.
On the site you can find different versions of this developer’s resuscitators with detailed instructions on its use. Versions differ not only in program versions, but also windows version. Please choose carefully and I strongly recommend that you read the instructions and frequently asked questions before use.
List of programs already integrated into the resuscitator:
Backup and recovery
Acronis True Image 2017 Acronis Universal Restore Active Disk Image Professional R-Drive Image StorageCraft Recovery Environment Ghost Paragon Hard Disk Manager 15 Premium TeraByte Image For windows AOMEI Backupper Drive SnapShot
HDD
Disk management, system Acronis Disk Director 12.0 EASEUS Partition Master 10.8 WinPE Edition (Russian version WYLEK) Paragon Hard Disk Manager 15 Premium MiniTool Partition Wizard Server AOMEI Partition Assistant Macrorit Disk Partition Expert IM-Magic Partition Resizer Eassos PartitionGuru Defraggler Auslogic Disk Defrag HDD Low Level Format Tool HD Tune Pro Check Disk GUI (Rus) Victoria HDD Regenerator 2011 (Eng) HDDScan Hard Disk Sentinel Pro Active KillDisk Western Digital Data LifeGuard Diagnostics CrystalDiskInfo
Other programs
AIDA64 Extreme 5.75. BlueScreenView Active Password Changer Reset windows Password UltraISO Premium 9.6.5 Total Commander 8.52 Registry Editor (x86/64) (Rus) Registry LoaderPE Autoruns FastStone Capture IrfanView STDU Viewer(Rus) BOOTICE Unlocker 7-ZIP (Rus) WinNTSetup Check Device Double Driver Imagex GImageX Opera 34 (Rus) Opera 12 (Rus) QtWeb Browser Download Master Qupzilla PENetwork Media Player Classic(Rus) EasyBCD 2.3 (Rus) SoftMaker Office (Rus) MInstAll TeamViewer
BurnInTest Professional
PerformanceTest 8.0 USB Safely Remove Ammyy Admin Fab's AutoBackup 4 Tech ATTO Disk Benchmark RWEverything Far Manager CPU-Z Disk2vhd
PassMark MonitorTest
HWiNFO32 5.36 BitLocker
Windows Repair Tool with DaRT Tools
Data recovery:
R-Studio 8.0 Active File Recovery Active Partition Recovery O&O DiskRecovery 9.0 MiniTool Power Data Recovery Runtime GetDataBack for NTFS Runtime GetDataBack for FAT DM Disk Editor and Data Recovery UFS Explorer Professional Recovery Hetman Partition Recovery
EaseUS Data Recovery AdvancedPE
Antiviruses have also been added to the resuscitator, which can be very necessary when logging into Windows is blocked by viruses. SmartFix Tool 1.3.4, Kaspersky Rescue Disk, Dr.Web CureIt! , Kaspersky Virus Removal Tool.
Having such a resuscitator always in stock, you will no longer be afraid of any failures and glitches of Windows.
Tags: Windows virusesWindows errorsInstallation and windows settings
ddr5.ru
windows 7 -
Creating a system repair disk in Windows 7 is not too difficult, I understand that, but maybe I'm not creating it correctly? The fact is that I accidentally deleted the backup created using Computer Data Archiving, but there is another one, previously copied to a flash drive, I have it 32 GB, but System Image Restoration does not want to accept the flash drive, what should I do? Denis.
Creating a system repair disc
In our article we will tell you how to create a Windows operating system recovery disk, and then we will show you how to use it. But first, a short piece of advice for our reader.
- The simplest solution for you Denis is to use any Live CD, boot from it and copy your archive from windows image 7, from flash drive to HDD your computer from which you cannot boot. Next, boot your computer from the System Recovery Disk and your backup will definitely be found. I hope you know that the recovery will be complete and all your information from the disks that you included in the backup will be deleted.
Well, now create a system repair disk that needs to be used to boot the computer, it will contain Windows 7 recovery tools, with the help of them you can repair operating system boot problems or restore it from an archived copy, which is what we will do.
- Note: You must first have created windows backup 7, it's very simple. How to do it? You can read here -> How to restore a Windows 7 system, this is an article about how to restore Windows 7 using a variety of recovery tools built into the operating system itself if you have a problem starting or windows work, read it first, maybe everything will work out without a recovery disk.
You also need to know that the system architecture is important for the recovery disk; you can use a 32-bit recovery disk for any 32-bit Windows 7, and a 64-bit recovery disk for any 64-bit Windows 7.
Create a system recovery disk, go to Start->Control Panel->Backup computer data,
Select Create a system repair disk.
Insert the DVD into the drive and click the Create Disc button.
There is a short process of creating a system recovery disk. Now let's talk about how to use it. Let's say your computer has a serious crash and you cannot load Windows 7 at all. You press F-8 on the keyboard immediately after starting the computer, with the intention of getting to the Computer Troubleshooting menu, but there is nothing except a black screen. Recovery windows performance 7 from the Recovery Disk, you need to change the boot priority to the drive in the BIOS, then insert the recovery disk into it and restore your Windows 7 using a backup. How to change the boot priority in the BIOS, read our articles BIOS: Boot from disk and LAPTOP: Boot from the disk into the BIOS. We inserted the Recovery Disk into the drive, then rebooted, the System Recovery Options program starts. Press Enter or the prompt to boot from the disk will disappear.
The computer is booting from the Recovery Disk 
A disk-based recovery tool can try to recover if you wish. start windows 7, by the way, it may end in success. 
If not, then we can choose Restore the operating system image 
Restoring a computer from an image finds the latest available system image, click next or specify another image if we have one. 
Next, Windows 7 is restored from a backup. 
www.imprice.ru
Using the windows RE recovery environment in windows 7
The Windows RE recovery environment allows you to restore the system startup and operation, restore from a pre-created image, access the command line, and perform RAM diagnostics.
On this page:
Understanding the recovery environment
During the installation of Windows 7, a service partition is automatically created on the hard drive, on which boot files of the operating system are located. It also provides access to the Windows RE (Recovery Environment) recovery environment.
If your system does not have a service partition, this can happen for a number of reasons, in which case the boot loader is simply placed on the active partition.
Anyway, in windows 7 you can:
- boot into recovery environment from hard drive
- create a CD containing the recovery environment
This will allow you to bring the system back to life even if it does not boot. This does not require an operating system installation disk, as was the case with Windows Vista. This is a very important improvement in Windows 7, which should especially please owners preinstalled systems that do not have an installation disk. Whereas OEMs used to implement their own recovery solutions, now they can simply add their own user interface to the Windows RE image recovery process.
Just like in Windows Vista, the recovery environment in Windows 7 gives you the following options:
- Automatic startup repair fixes problems that prevent loading windows 7. This tool can be used if boot files are damaged or overwritten by the boot loader of another operating system.
- System Restore allows you to return to the point before the problem occurred. Sometimes this tool also allows you to restore the system startup. Of course, system protection must be enabled, otherwise there will be no recovery points.
- System Image Recovery is a wizard that walks you through the steps of restoring a system from an image previously created by windows archiving.
- Diagnostics windows memory checks RAM for errors. Typically, a visible manifestation of errors in RAM is a blue screen (BSOD). When blue screen A memory test can be used as a first diagnostic tool.
- The command line allows you to perform a wide range of actions from file operations to launching the registry editor, which can also be used to restore normal system operation.
Booting to Recovery Environment from Hard Drive
To access the Advanced Boot Options menu, press F8 after turning on the computer (but before loading the operating system).
The first menu item is Troubleshoot your computer - select it and press Enter. The Windows recovery environment will launch, where the first thing you will be asked to do is select a keyboard layout.
Select the language in which your administrative password is set account, since you will need to enter it in the next step.
After entering your password, you will see a window with recovery options.
Creating a system recovery disk or flash drive and booting from it
If you have an installation windows disk 7, it is not necessary to create a recovery disk. You can boot from the installation disk into the Windows RE recovery environment. If you don’t have an installation disk, you must create a recovery disk - you will need it sooner or later.
Creating a system repair disc
Insert a blank CD into the drive. In Control Panel, open Backup and Restore, then in the left pane, click the Create a system repair disc link. In fact, the disk is created with one click.
Creating a system recovery flash drive
Unfortunately, in Windows 7 there is no way to create a recovery flash drive, which is important for owners of tablets and netbooks that are not equipped optical drive(it appeared in windows 8)
Luckily, there is a workaround - a virtual burner!
It worked for me trial version Phantom Drive.
All! Since flash drives tend to get lost, I recommend copying the files to a secluded place or creating an ISO image, for example, using ImgBurn.
By the way, the above command is also suitable for creating an installation flash drive with windows from the distribution folder or connected ISO.
Booting from a system recovery disk or flash drive
Insert the recovery disk into the drive or flash drive into the USB port and reboot (you need to set the boot priority from the drive or USB drive in the BIOS). It will boot into windows RE.
Booting into the recovery environment from the installation disk
Insert the installation disk into the drive and reboot (you need to set the boot priority from the drive in the BIOS). The Windows installer will start. On the first screen, set your language options, after which you will see home screen installing windows 7.
Select the system you want to restore, select the Use recovery tools... radio button, and click Next. You will see a window with recovery options.
www.outsidethebox.ms
Loading...
