Return the operating system to operational state after a failure, every user who has basic skills in interacting with Windows can do it, because Microsoft developers have provided many convenient and simple tools to perform this task. Let's take a closer look at how to restore a Windows system from a flash drive or disk.

But to use these tools, you first need to figure out how to make a Windows 7 system recovery flash drive. There are two ways to create installation media:

• Using a series of command line operations.
• By using the UltraISO (?) utility.

You can learn more about these two methods and the features of their application from our other article, which describes it step by step. In addition, it can be used as a recovery medium.

We also talked about this in detail earlier. You only need to set the desired boot order on the “BOOT” tab. After saving the configuration and rebooting, it will not be the operating system that will start, but the distribution package recorded on removable media(USB/DVD).

Restoring a Windows system from a flash drive or disk.

After completing all the preparatory stages described above, you can proceed to the main task. Restoring a Windows Windows system from a flash drive is done as follows:

W indows 7 via a flash drive is done in the same way as in Windows environment. You simply select the saved checkpoint and roll back the configuration to it, returning the computer to its normal operating state:
Windows from disk is done in a similar way. The only difference is the choice bootable media V BIOS, where you need to select DVD/CD instead of USB, other actions remain unchanged. All you have to do is wait for the rollback procedure to complete and check if the system works after a reboot.

Using the command line.

If rolling back the system to the last working configuration did not bring the desired effect, then you can try using the recovery utility Bootrec .exe, which is launched from the command line.

1. Open the list of Windows recovery tools and select Command Prompt.
2. Enter the command “Bootrec" and see a list of all available requests.
3. Try sequentially entering two commands - “Bootrec.exe /FixMbr” and “Bootrec.exe /FixBoot”. After entering each command, do not forget to press Enter.
4. Type “Exit” to shut down and restart your computer.

With these commands you will overwrite the MBR and create a new boot sector. However, if these steps do not help, you can try another method:

1. Open Command Prompt again through Windows Recovery Tools.
2. Enter the command "Bootrec.exe /RebuildBcd".
3. When a system is detected, press “y” to add it to the boot list.

After exiting the command line using the "Exit" prompt and restarting your computer, you should find your system working correctly.

In this tutorial I will tell you how to create a full bootable USB flash drive for Windows 7 in 5 minutes using the UltraISO program. Typically, such a flash drive is used to restore the operating system in case of unforeseen circumstances - in particular, when the system cannot boot on its own. The fact is that regular means Windows 7 operating systems are often powerless when fatal errors occur. Therefore, the only thing left is to use a bootable USB flash drive to restore Windows. As already said at the beginning, for these purposes we will use a well-known application for working with iso images and burning discs - Ultra ISO.

Additionally, many of us today don't have disc drives, and Windows developers distributed their early products mostly on DVDs and CDs (though that's not the case with Windows 10). Why not record a system image for later recovery on a USB flash drive to get rid of the inconvenience forever? In addition, the advantages bootable flash drive a bunch of:

• You can always take it with you, having at hand a fairly universal Windows recovery kit


• making a bootable USB flash drive for Windows 7 using Ultra ISO couldn't be easier - read the guide below


• The flash drive can be overwritten at any time with user files


• The device is detected and loaded on most system configurations and Windows operating systems


• Bootable USB flash drive is faster and not subject to read errors

It is clear that the Windows 7 distribution kit with a recovery kit should always be at hand - at the most critical moment it may turn out that this is the only salvation after an operating system crash Windows systems. Therefore, without further ado, let’s get down to business - that is, creating a flash drive with Windows 7 “on board”.

Step 1. Install UltraISO - a program for burning a bootable USB flash drive

For quick creation bootable USB flash drive for Windows 7 we need the well-known UltraISO program latest version. You can download it on the official website or search on torrents for a free Russian version, preferably the latest one, of the Ultra ISO distribution. Latest on this moment the version available for download is 9.6, released in August 2014 (now this application for burning discs and flash drives is not updated very often). Conveniently, the program for creating a bootable distribution on a flash drive is well localized and available on file hosting and file hosting services completely free. However, I advise you to honestly pay for using UltraISO in the pro version if it will help you make a flash drive to restore Windows 7.

Download the Russian version Ultra ISO from the official website of the program

Step 2. Download the Windows 7 distribution from the Microsoft website

You can download the Windows 7 distribution required for recording onto a flash drive on the official Microsoft website or, again, on torrents - free, but not entirely fair. Perhaps you have a licensed or trial version of Windows 7 to create a recovery flash drive, you can create a system image using the UltraISO bootable flash drive creation program. However, it will be more convenient to use a ready-to-burn ISO disk image, which can also be downloaded on the Microsoft website - UltraISO will “digest” it more easily when creating a USB flash drive, which is necessary for loading and resuscitating the Windows OS in the future.

Loading the OS distribution Windows 7(8) to create a bootable USB flash drive from the rutracker.org torrent

In principle, for our purposes, almost any iso image of a Russian-language or English-language distribution of Windows 7 or 8 is suitable, it doesn’t matter whether it’s 32- or 64-bit Windows edition 7. The size of the distribution package loaded onto a bootable flash drive can range from 2 to 7 GB, so make sure that there is enough space on the flash drive to create a Windows 7 bootloader.

In my situation, as you can see, for burning I use the W8.1x64_Enterprise_Reactor iso disk image, respectively, this is a 64-bit version of Windows 8.1, which is currently installed on the computer where I am writing this guide. In principle, the methods below are also relevant for Windows 10: the UltraISO program is quite omnivorous.

Step 3. Burn and create a bootable USB flash drive

Launch the Ultra ISO program. Select the menu command "File - Open...", specify the ISO image to the program to create a flash drive bootable Windows 7. On the right side of the UltraISO window you will see the contents of the Windows installation distribution, which will be written to the flash drive.

The contents of the future Windows 7 recovery flash drive are displayed in the right panel of UltraISO

Step 4. Preparing a flash drive to create a bootable OS

In order to make the flash drive bootable, insert the device into the USB connector of your computer. Format it to file system FAT32. This is necessary so that when booting the computer can easily read data from the drive, since FAT is a universal system for storing files and creating bootable disks on a flash drive.

Step 5. Burn the Windows distribution to UltraISO on a flash drive

Fortunately, the UltraISO developers have already taken care of you and me, so to record the files necessary to create a bootable USB flash drive for Windows 7 or 8, you can use the corresponding program item “Boot - Burn image hard drive". How to do this - see the screenshot below.

This team will help us do bootable USB flash drive

Next, you will be asked to select a method for creating a bootable flash drive - select the “USB-HDD+” item. If you have not formatted a flash drive yet, you will be prompted to do so using the UltraISO program. Again, don't forget that the drive needs to be formatted as FAT32 for full compatibility with your computer.

The last step is to select "Write Disk Image" or "Burn". And that's all that remains to make a bootable USB flash drive! However, no: all that remains is to wait until the bootable flash drive is created and test the resulting kit on a working machine.

Step 6. Test loading the created bootable Windows distribution on a flash drive

At the end of the process of creating a boot flash drive, go to Explorer or another file manager(for example, Total Commander) and make sure that the Windows OS files are present on the flash drive.

Next, restart your computer and set the USB flash drive with Windows 7 as a boot device in the BIOS. Then save the changes and make sure that the computer starts through the flash drive - that is, it successfully loads the Windows OS shell.

Set the flash drive as a boot device in the BIOS

What do we need?

1. CD/DVD disc (blank)
2. Flash drive
3. Two programs: UltraIso, and Daemon Tools.

Why do you need a recovery disk?

• Restore system from iso image and systems.
• Restore Windows initial boot.
• Roll back the system to the last working configuration.

We create a recovery disk on a blank.

1. Go to the Start menu->My Programs->Maintenance->Backup and Restore.

Or create a new task “recdisc” in the “Create a new task” application. To do this, open the task manager, select “New task (Run)” from the “File” menu, and in the new window enter the name of the application “recdisc”.

The Create Recovery Disk application will load on the screen.

We insert an empty disc into the drive and press the button to create a disc.

After creating a Windows 7 recovery disc, you will receive a notification like this.

If a flash drive is not needed, you can finish here, since the files for system recovery are already on the CD/DVD disc.

Create an iso image of the recovery disk.

To solve this problem, you can use many programs, for example ImgBurn, or Daemon Tools, let's do this using Daemon.

2. Go to the section " New look". Select the path to save the iso image and enter a name, for example, “windows7_recovery.iso.” Press the start button.

We are waiting for the program to create an iso image.

As soon as the program creates a disk image, you will receive a notification and a picture like this.

We write an iso image of a Windows 7 recovery onto a flash drive.

I have already written several times in my articles on how to make a bootable USB flash drive, in the last article on this topic I l, but this mini utility refuses to accept iso file, created in Daemon Tools.

Therefore, I was helped in creating a bootable flash drive.

1. Launch the UltraIso application, go to the File->Open menu, open the iso on the disk windows image 7.

2. Go to the “Boot” menu and select the menu item as in the picture “Burn hard disk image”.

In the window that opens, select the flash drive to burn and press the burn button!

To check the bootable media, reboot the computer and boot from the flash drive.

Well, that’s all, the Windows 7 bootable recovery disk has been created. If you don't want to create, download for free. Good luck.

Most computer and laptop users have probably more than once encountered problems loading Windows 7. That is, their operating system simply refused to boot in normal mode and gave an error. In such situations, it is impossible to even enter the “ Safe mode» key F8.

The first action that may come to mind in such a situation is a banal reinstallation of the Windows 7 OS itself. This procedure is quite simple and correctly described in the following instructions:, and in many others.

Reinstallation will certainly solve the problem with loading the operating system, but not everyone wants to lose important documents, programs and saved settings various programs. If using the operating room Linux systems You can somehow get the documents and save them (guide: ), then reinstalling applications and hardware device drivers, as well as setting them up, will take a lot of time.

Note: this manual does not cover computer hardware problems, such as failure of any device, problems turning on the laptop, problems with the image, and the like.

To your luck, the problem with starting the operating system seems to be much easier to solve. Typically, the cause of a faulty OS boot is a damaged built-in Windows boot loader, a damaged MBR (master boot record). To restore the OS, you need to restore the Windows bootloader and MBR. How to do this will be described below.

Restoring Windows 7 to normal boot

MBR recovery method boot entry) and the bootloader in Windows 7 is almost completely similar to that for Windows Vista. This means that the recommendations described below can be safely used to restore Windows Vista.

Let's get started. To start, you will need bootable dvd or a flash drive with a distribution kit of Windows 7 OS. How to prepare devices with a distribution kit is described in detail in the following instructions: How to install Windows 7 from a flash drive using the WinToFlash program.

Now you need to click on the “System Restore” item below:

After this, a search will begin for already installed versions of Windows on the computer’s hard drive:

As a result, the program should find earlier installed versions Windows 7. Select it and click Next:

The Windows recovery menu should now open:

Let's look at all the recovery menu items:

• Startup recovery – automatically restores the Windows boot loader and system data.
• System Restore – restore the OS using previously created restore points. These restore points are created themselves when there are important changes in the system, installation Windows updates, as well as independently by the computer user.
• System image recovery—repairs the Windows operating system using an image on a storage device.
• Diagnostic Tool Windows memory- test random access memory for errors. A very useful thing.
• Command line - console for self-recovery OS.

You will only need the first two items, as well as the last item. Let's take a look at Startup Repair first. This is the easiest way to restore the system to normal boot. Let's click on the inscription. OS diagnostics should start:

After some time, the problem will be detected (or not) and fixed:

Now let's look at the next menu item - “System Restore”. Let's try to restore the system using one of the restore points. To do this, click on “System Restore”:

Then select the most recent system restore point and click “Next” again:

Click “Finish” and agree to the warnings:

Now you need to restart your laptop or computer:

To restore the bootloader, enter the following into the command line: Bootrec.exe /FixBoot:

To restore multiple OS boot in normal mode or in case of errors with partitions, you must use the following command: Bootrec.exe /RebuildBcd:

As a result, you should get something like this:

This article is over, I hope Windows 7 recovery is described here more than enough, thanks for your attention.

Detailed description of how to restore normal loading Windows 7 after various system failures.

Windows 7 boot problems and their causes

Many computer and laptop users have probably encountered problems loading Windows 7. operating system It simply refused to load and gave an error. In such cases it is impossible to even enter Safe mode By F8.

The first thing that comes to mind in such situations is reinstalling Windows itself. The procedure is simple and well described in the manuals:, and many others.

Reinstallation will solve the problem with loading the system, but I don’t want to lose documents, programs, and I don’t want to set everything up again. If the documents are still possible using Ubuntu Linux somehow get it and save it (guide: ), then installing drivers and applications, as well as configuring them, can take a lot of time.

Fortunately, there is a simpler way to solve the system boot problem. Bootloader corruption is usually the cause of system boot problems. Windows, disruption MBR. To restore the system, you need to restore this same bootloader and MBR. How to do this will be described below.

Restoring Windows to Normal Boot

MBR and bootloader recovery process Windows 7 almost completely identical to that for Windows Vista. This means that the recommendations described below can be safely applied to recovery Windows Vista.

Let's begin. First of all, we need a boot disk or flash drive with the distribution kit Windows 7. How to prepare them is described in detail in the manuals:, and.

Now you should select the item below:

After this, a search for installed copies of Windows on hard drive:

As a result, the wizard should find the installed Windows 7. Select it and click Further:

The Windows recovery menu should appear:

Let's look at what each point is for:

• - Windows boot loader recovery and system files
• - restoring the system from restore points. Restore points are created automatically for important system changes, installation of system updates, and can also be created manually by the user
• Restoring a system image- restoring Windows from a disk image
• Windows Memory Diagnostic Tool- checking RAM for errors. Quite a useful thing.
• Command line - command line for manual recovery

The first two points, as well as the last one, are of interest to us. Let's look at it first. This is the easiest way to restore normal system booting. Let's launch it. The diagnostics should run:

After some time the problem will (or will not) be fixed:

Let's now consider the second menu item - . Let's try to restore the system from restore points. To do this we run:

Now select the last restore point and click Further:

Click on Ready We agree with the warnings:

Restart your laptop or computer:

If the manipulations described above did not bring results, then run Command line:

To restore the MBR, enter the command Bootrec.exe /FixMbr:

To restore the bootloader, enter the command Bootrec.exe /FixBoot:

To restore normal booting of several systems or in case of problems with partitions, you should use the command: Bootrec.exe /RebuildBcd:

As a result, you will get a report something like this:

Now you can simply restart your laptop. Windows should boot normally.

That's all. Thank you for your attention.

Please ask all questions about restoring Windows in this forum topic: .