An important point after purchasing a Beats by Dr. device. Dre Beats Pill (or even before purchasing it) is to read its service instructions. This needs to be done for a few simple reasons:
- to know how to use the device correctly
- to know how to maintain / periodically check the correct operation of the Beats by Dr. product. Dre Beats Pill
- to know what to do in case of an accident Beats by Dr. Dre Beats Pill
If you haven't purchased Beats by Dr. Dre Beats Pill now good point to view basic information about the product. First, review the first pages of the instructions you will find above. You should find the most important technical data of Beats by Dr. there. Dre Beats Pill - this way you can check whether the equipment meets your requirements. Diving into the following pages of the Beats by Dr. user manual. Dre Beats Pill you will become familiar with all the available functions of the product and information regarding its operation. The information you will receive about Beats by Dr. Dre Beats Pill will certainly help you make your purchasing decisions.
In a situation where you are already the owner Beats by Dr. Dre Beats Pill, but you have not yet read the instructions, you need to do so in connection with the above. Then you will know whether you used the available functions correctly, and whether you made any mistakes that could shorten the life of Beats by Dr. Dre Beats Pill.
However, one of the most important roles that the service manual performs for the user is to help solve problems with Beats by Dr. Dre Beats Pill. Almost always you will find there Troubleshooting, the most frequent breakdowns and Beats by Dr. device problems. Dre Beats Pill along with recommendations regarding methods to solve them. Even if you are unable to solve the problem yourself, the instructions will prompt you to take further steps - contact the customer service center or the nearest service center.
Instructions
When purchasing headphones from the well-known and popular company Beats, their owner may encounter the problem that he will not have enough information in Russian to start using them. To headphones Monster Beats instructions are very much appreciated, because relying on them it is much easier to feel like a confident user and not be afraid of breaking something in an expensive product.
Are instructions really necessary?
Strictly speaking, this equipment is designed in such a way that everything can be understood on an intuitive level, especially if you already have experience using similar products. Often, even beginners need advice from a qualified seller. On the other hand to Monster headphones Beats instructions in Russian, at least in brief form, will not hurt anyone.
IN Lately Wireless headphones are especially popular among Dr. Dre's products. It's quite easy to explain, because they are really very comfortable. And it's not just that they lack cable. In fact, they make it possible to also use a wire for connection. Instructions are included with all products. The only problem may be that it is written in foreign languages that you do not speak sufficiently to understand all the terms. Beats by Dr Dre products would definitely benefit from instructions in Russian. We will try to give brief instructions to the most popular products recently.
Features of wireless headphone control
How to use Beats wireless headphones instructions in Russian.
Power button. Located on the right earcup. Used to turn the product on and off. In order to do both, you need to press and hold the button for a while.
When the headphones are turned on, the energy level indicators glow white.
If you need to find out the charge level, you need to briefly press the power button.
Button B. Located on the left earcup. Performs a number of functions:
- a single press can stop or resume playing a music track;
- the same action must be performed to start or finish telephone conversation;
- in order to skip the music track, button B must be briefly pressed twice in a row;
- To return to the previous track, you need to quickly press this button three times.
Now you know how to use Beats wireless headphones, the instructions in Russian will continue a little.
This is how you can keep the volume under control. If you are using a wireless connection, you can control the volume using the buttons on the left earbud, which are located above and below the B button.
Column control
Instructions are also included with Monster Beats speakers, and again, most often in English and other foreign languages. If you don't know them well enough, you may be afraid that you will do something wrong. Monster Beats instructions in Russian are simply necessary, so we post information on how to use the speaker. In particular, what its multifunctional button “B” is capable of:
- with its help, the pairing mode is activated; to do this, hold it for 3 seconds;
- to pause – one press;
- one press during an incoming call – answer the call; switch between calls.
We can say that this is for the B button on the Monster Beats by Dr Dre speakers.
Two Pill XL speakers allow you to create a stereo system. NFC is used for this. Please note that the plug pad has a 3.5 mm jack, which can be used to connect to another speaker.
If you already have Beats by Dr Dre products, the instructions in Russian may not be useful to you, often you can figure out all the functions on an intuitive level, especially if you have experience with such equipment.
It doesn’t matter whether you have a speaker or Beats headphones, the instructions in Russian or in a foreign language that you speak well can help you better understand this equipment. Therefore, we provide you with the opportunity to familiarize yourself with them.
GOODS
In this review we will test another portable speaker system with a built-in battery, namely Beats By Dr. Dre Pill. At first glance, this device is primarily used for listening to music from various devices via Bluetooth protocol in hiking conditions. However, having understood it better, it turned out that the functionality of this column is much more diverse and it can be used to perform many more tasks. This is a universal assistant for many life situations.
Let us immediately note that this product no longer belongs to the Monster brand. "The company "Monster Cable Products (Monster)" has not cooperated with the company "Beats by Dr." since January 2012. Dre" and have not produced headphones from this brand since January 2013 ()". Now it's separate trademark Beats by Dr. Dre.
1. Color options:
The speaker is available in 3 standard colors: black, white and red 
And in 2 colors Special Edition “Pretty Sweet”. Also, just today, we noticed a new color announced - pink. 
2. Packaging and delivery:
The system comes in a rather colorful package, sealed in cellophane film on the outside.
On the front, on a white background, is an image of the front part of the speaker itself (in our case, black),
On the reverse side there is an image of the rear view on a black background.
The sides indicate compatible devices (smartphones, tablets and laptops, although the list is not limited to this) and the main functional features
Removing the outer shell reveals another box made of pure white cardboard. The only inscription on it is "Beatspill".
On the side there is a small black fabric strap, which we pull to open the box. On the hinged lid there is a cardboard pocket containing a plastic bag with an advertising booklet and a company sticker.
In the main part of the box, the first thing we notice is the speaker itself (more precisely, the cover) in a transparent blister protective on top
And under another hinged cover there are 2 cables (USB-microUSB and an audio cable with 3.5 mm plugs), instruction manual
And a small cardboard box with a power supply
Under the instructions and cables in the niche there is a carabiner for the case
We take out the blister with the speaker packed in a case
And open it along the perforated line on the bottom.
We take out the case (immediately attach a carabiner to it so that it doesn’t get lost)
And open it to get the column.
In the middle of the front part, around the large “b” button, there is an information sticker indicating the main functions of this button
We remove this sticker and the unpacking process is complete. Please note that this process described in some detail due to the large number of counterfeits of products from this manufacturer (and not only his). Maybe all these nuances will help you recognize a fake device.
3. Design features:
All materials used High Quality, the front part is made (except for the center with buttons) of perforated metal,
The back is made of matte plastic.
The base has a rubber sticker that prevents the system from sliding on the surface.
The design of the column is monolithic, no backlash, creaks, or deflections were noticed. There are no burrs or poorly fitting parts either. The assembly is perfect.
In the middle of the front part there is a microphone on a plastic insert at the very bottom, and a large multifunctional button “b” is located above.
On top there are two buttons "-" and "+" to adjust the volume,
And on the back side, at the top there is a platform for connecting via NFC, and below is the on/off button. To the right of the button on/off Bluetooth indicator and microUSB connector for charging, and to the left are connectors for audio devices. Through the "in" connector we can connect an external sound source for playback through the speaker, and through the "out" connector, on the contrary, we can transmit an audio signal to external device.
Externally, the system looks like an enlarged pill, which is even reflected in the name. The dimensions are very, very small: 190x46mm.
Comparison with a pack of cigarettes:
Weight is only 310g. At the same time, the speaker can work up to 7 hours on a single battery charge.
Power adapter specifications:
4. Preparation for work:
Everything is very simple here, you just need to connect Pill to the network and you can start working right away. Let's look at the battery charging process. The microUSB connector has a backlight and with its help you can find out whether the battery is fully charged. While it lights up red, charging is in progress; as soon as the connector lights up green, the process is complete.
5. Work via Bluetooth connection to listen to music from mobile device:
We used an iPhone 5 as a sound source. To connect, it’s quite enough to just turn on the speaker (it will sound very interesting sound), the backlight of the "b" key will light up
And for pairing mode, you need to press the “b” button and hold it for about 3 seconds (if the system is connected for the first time, pairing mode starts immediately). In this mode, the Bluetooth indicator on the rear panel blinks white.
On the iPhone, BeatsPill will appear in the list of available ones - connect and that’s it. After this, the Bluetooth indicator will glow steadily.
We start playing music on the iPhone and enjoy the sound. The volume can be changed both on the iPhone and on the speaker; the “b” button is responsible for the Pause/Play function. All other settings and switching are done on the iPhone.
If at the time of listening incoming call, then the music playback stops and the melody of an incoming call is heard from the speaker. You can answer the call by pressing the “b” button and our system turns into a speakerphone due to the built-in microphone. Those. You can talk through the speaker. After the conversation ends, the music will continue.
If you turn off Bluetooth on your iPhone, the indicator on the speaker goes out, but as soon as you turn Bluetooth back on, the connection is immediately restored and the indicator lights up again.
6. Working with stationary device(using the example of MacMini).
We connect MacMini and BeatsPill via Bluetooth as with the iPhone; in the sound settings of Mac OS X, select BeatsPill as the output and input audio device. If we are going to use the speaker for conversations via Skype, then the corresponding settings must be made in Skype settings. Thus, our system can be used as a computer audio system and as a speakerphone. It's quite convenient. One note: the microphone is not very powerful and you need to talk next to the speaker.
There was an attempt to connect the speaker and computer via a USB cable (like some special speakerphones), but nothing worked.
7. Work with an external sound source via an audio cable.
We connect any audio device with a 3.5 mm output. to the “in” connector of the speaker with the supplied cable and turn it on. All controls (except volume) are only possible on an external sound source. Button "b" does not work.
8. Bluetooth receiver mode.
This mode was checked as follows. The MacMini was connected via Bluetooth to BeatsPill (again, in the Mac OS X sound settings, select BeatsPill as the output audio device). We connect our speaker via the “out” connector with an audio cable to any audio system (we connected an old but good JVC UX-7000). Everything went without problems. This way you can use the device under test as a Bluetooth receiver sound signal with subsequent transmission of sound via an audio cable (something like that, sorry if I formulated it a little incorrectly).
9. Sound quality:
Pill showed excellent results. Bass, detail - everything is on the level. The volume reserve is quite sufficient. And all this in a miniature speaker with four very small speakers. I can't even believe that this is possible.
10. Conclusions:
A miniature, multifunctional speaker system with excellent sound, well made from quality materials. It can be used not only when traveling to nature or somewhere else, but also at home or in the office. Nice kit delivery and variety of colors further enhances the appeal Beats By Dr. Dre Pill.
I love the sound. Good sound. There are only sketches in my head about the magnificent sound. Maybe it will work out in life, so there will be a review on music, in which Bang & Olufsen acoustics will take part. Well, for now, let’s look at a budget option for camping acoustics (after all, spring-summer is coming, barbecues, baked potatoes, drinks and fun). Please cut below!
I needed acoustics that would produce more or less good sound, compared to netbook speakers and can be used outdoors. I liked the specimen I was reviewing, so I decided to order it.
General form
Characteristics:
Bluetooth version: Bluetooth V4.0+CSR8640
Supported profiles:HSP,HFP,A2DP and AVRCP
Output power: 5W (2 pieces of 2.5W each)
Battery: built-in, capacity 1200mAh.
Reception distance: 5~15 meters
Dimensions: 20cm x 5.1cm x 5.1cm
Sizes: Black, white, blue, pink, red.
Equipment:
1 x Pill Bluetooth speaker
1 x USB Cable
1 x Audio Cable
I didn’t travel long, about 25 days. It was sent without a track. Arrived in a simple plastic postal bag. Inside there was a box, the printing was not the best printing (although the description of the lot indicated that there would be no packaging at all, but simply wrapped in dough). Well, this is definitely a plus, you can even give it as a gift. The retail packaging was wrapped in dough and arrived without any dents or anything. Inside the retail store, the speaker was wrapped in a matte bag, the kind you usually put in for phone batteries. Under the speaker there is a rectangular cardboard pocket with cables: USB-microUSB, 3.5-3.5. And that's all from the kit.
After looking at it for a minute, or even less, I began to turn it on. It turns on by pressing and holding Power buttons 2-3 seconds. When turned on, it makes a sound like the original Beats.
Bluetooth
And he immediately starts chattering in English saying, connect via bluetooth and the LED flashes. It is located very quickly and connects without passwords. Bluetooth is always active even when a flash drive or audio input is connected, but it is not possible to connect to Bluetooth. Those. you need to remove the flash drive or cable from the audio input and then bluetooth will connect.
I connected Redmi and Cowon J3. Both connected without problems, the + and - buttons on the song column switch, the button b on the front part answers an incoming call, the microphone works well during conversations. But there is one catch. There is a difference in volume between devices. We turn up the volume on the speaker to full (from minimum to maximum 15 presses), connect Redmi and also turn it up to full, it screams so much that it hurts your ears, but Cowon J3 follows the same scheme, it plays an order of magnitude quieter, it feels 35 percent quieter thirty. I don’t know exactly what’s wrong, but I can assume that it’s a matter of Bluetooth audio profiles, Cowon doesn’t support something there, or the tooth version.
MicroSD
Here we just inserted a flash drive and the music started playing from the first catalogue. There is no option to switch directories. Tracks are scrolled through by pressing + or - once. If a flash drive is inserted, by pressing the button b you switch between Flash card or Bluetooth mode.
The track is remembered when turned off.
Audio input
It was a little dark here. I connect the supplied cable to the netbook, and the other end to the connector marked In, and the response is silence. Therefore it doesn't work. The poking method helped :) I connected it to the Out connector and the sound came from the speaker speakers (I forgot to say there are 2 active and two passive membranes, below there will be pictures of the patient’s disassembly. If I didn’t understand correctly what this is, then please correct me). The Chinese, therefore, got clever with the entrance and exit signs. Well, it works and let it work. But no, I want everything to be humane.
Patient preparation
I wanted to disassemble the column and see what was inside and maybe even make it humanly that In was the input and Out was the output. It is very easy to disassemble; to do this, you need to remove the rubber strip that serves to stabilize the speaker on the surface. The strip adheres neither strongly nor weakly to double-sided tape. There are screws under it (5-1=4), unscrew them, pry up the mesh, preferably with plastic (but I used a knife to pry it off and the paint didn’t even get scratched) to remove the mesh and the entire block in it from the latches. It was not possible to swap In and Out :(, I thought they were also on the same contacts as, for example, speakers. But I was glad that the battery costs 18650 and you can replace it if something goes wrong with it. Well, or even install a larger one, or maybe You can put two in and try and then the autonomy will increase by a factor of 4. You can listen for a day at almost maximum or 3 days at a volume that is comfortable for an ordinary room. If anyone knows whether it can be done and how to do it with batteries, then answer in the comments. I will be very grateful.
The speakers turned out to be 2 active (through the mesh it seems that all 4 are active) and 2 passive membranes. I touched the speakers and membranes with a needle, the feedback was different. On the speaker it’s continuous, but on the membrane it looks like it’s low frequencies.
Results:
She satisfied all the needs that were required of her. The price matches the quality one hundred percent. If you want without any jambs, then you need to take the original Beats pill and not worry about it.
Loud, lows, mids, highs - it's all present.
+ Good battery life (lasts 10 hours at approximately 50% volume). For a room, 50% is too much. I could barely stand listening to it at such a loud volume for one day, but the experiment is ALL.
+ Good assembly and painting.
+ Beautiful.
The In and Out connectors are reversed
- Does not give an audible signal that the battery is about to run out. (maybe the LED behind the tooth starts to blink or the LED of the USB connector starts to light up, but I haven’t seen it)
- There is no notification when fully charged, neither light nor sound. You can only check with equipment that will show how much the speaker has taken into itself and when the charging process stopped.
+\- Talking.
+\- The number six on the front panel is constantly lit.
I recorded the video on my phone, so don't be angry. Below is the video link of the same on Yandex disk and recording sound with a voice recorder using Cowon J3
The music industry is constantly evolving and new sounds and deep bass appear every day, so in order to beat its competitors, Beats works and improves the technical characteristics of its devices to recreate unsurpassed sound quality. Beats engineers are developing not only headphones that captivate with their stylish space-age design and high-quality sound, but also wireless speakers. Beats by Dr. Dre has become a very popular speaker in its field.
The Beats acoustic speaker is a compact and fairly powerful sound transmitting device that can be connected via a Bluetooth port or wire to your computer, tablet or phone to play music. It is also possible to play audio recordings directly from a microSD card, which is very convenient, since by inserting a microSD from your phone you can listen to your audio recordings without using up your phone’s battery. In this mode, you can also switch between songs and adjust the music volume. There is a function speakerphone, if you unexpectedly receive a call on your phone, the device will switch you to the microphone, and you will be able to communicate without turning off the speaker. The device is also convenient to use for outdoor recreation.
The Beats speaker has a capacitive 820 mAH battery that allows you to play music for up to 10 hours. The operating range of the speaker is up to 10 meters, power 5 W, frequency 280HZ-16KHZ. The speaker is equipped with a 45 mm microphone at 3-5w, which depends on the version of the device, and a headphone jack. New models have a radio and a multi-colored backlight indicator, which expands the possibilities of operation of this device. The speaker comes with a universal USB cable.
What you need to charge your Beats speaker
If you are purchasing this type of device for the first time, you may be wondering how to charge your Beats by Dr Dre speaker? Everything is quite simple, you need to connect it using the USB cable that comes with the kit to any device that has a USB connector. We connect USB 2.0 to a laptop or other device that has an appropriate connector, connect Mini USB to a speaker. If you don’t understand USB connectors, you can find video instructions on how to charge a Beats speaker; absolutely all speakers of this type are charged in the same way. The device description also indicates how long it takes to charge the Beats speaker. Two hours is enough for the speaker to be fully charged, which is true. It is very convenient that charging Beats speakers does not take much time, because it is not always possible to charge devices in advance.
Beats speakers are quite a convenient and popular device for playing music, although this accessory is not new and devices of this type have been in demand for quite some time. Moreover, now players are more accessible, and any phone can play music at quite a high level. You won’t surprise anyone with a portable speaker anymore. To be competitive, devices must be created original design or whatever she had high quality sound. Beats speaker manufacturers have done a good job with these challenges. Easy to transport and use, this speaker has become quite popular on the market. You can purchase such an item not only for yourself, but also as a gift, because the complete correspondence between price and quality will not disappoint you. very convenient to use both outdoors and at home, the Beats speaker has won the hearts of many music lovers who value not only the convenient design, but also the purity of sound.
To make the right choice portable acoustics, you need to know the differences between beats Pill speakers different versions from each other, which is what our article will contribute to. We will tell you what innovations and technologies were applied in each version. We will start the article with a detailed story about the first version of the Pill column, and then we will tell you what has been added or changed.
Beats Pill portable speaker review
Let's start with the characteristics:
- Column weight: 320 g.
- Column size: 190x45x45 mm. (fits easily, for example, in a jeans pocket)
- Number of speakers: four.
- Speaker power: 12 W
- Is it possible to pair 2 speakers: No
- Talking through a speaker instead of a phone: Yes
- Microphone: Yes
- Power supply: Li-Ion battery
- Operating time: 7 hours in wired mode, 4 hours in Bluetooth mode
- Charging other devices from the speaker: No
- Volume control: Yes
- Track switching: Yes
- Reception range: 10 meters
- Bluetooth: 4.0
- Technologies: Apx-X, Bluetooth 4.0, NFC
Equipment:
1. The beats Pill stereo speaker itself (bluetooth)2. Audio cable 3.5 mm mini-Jack 1.5 meters long
3. USB 2.0 cable
4. Convenient case for storing and transporting the device
5. Power adapter6. Instructions
A look at the column and its functionality
The beats Pill speaker has 4 wide-range speakers, covering the entire sound spectrum from low to high frequencies. They are located under a durable metal mesh that protects them from external influences, falls and other troubles that she may get into at your music party.Metal beats button- This is a button to turn on bluetooth for wireless connection. It also lights up when the speaker is turned on.
There is a microphone under the button. Why is it needed in the column, you ask. We answer - beats Pill speakers can be used for speakerphone, i.e. speak on them without answering the phone. You can answer a call using the same metal beats key on the front of the speaker. Above the metal button with the Beats logo we see volume control buttons.
Just above is the NFC icon, which tells us that this speaker can be synchronized with your device (or the device of your friend who came to visit) using a simplified system, without turning on bluetooth and without searching for the speaker in the list of available devices. To do this, you just need to bring your smartphone to this icon. Of course, for this, the smartphone must also have NFC technology, which should also be included.
On the back of the speaker we see audio output and audio input connectors, a device power button, an LED and a micro-USB connector for charging and connecting to a computer.
The LED blinks when it is searching, and lights up when it is already connected to a sound source. The audio output allows you to output sound from the “Pill” to other speakers, for example, larger ones.
Speaker sound
The four young men from the box representing the speakers know their job very well - the speaker produces high-quality, loud, detailed sound. Of course, you shouldn’t expect the “sound” of huge stationary speakers, but in terms of volume the Pill outperforms many competitors in the same weight category, such as the Jambox. Many experts note that “Pill”, being smaller, plays at the level of Big Jambox, which is more than 2 times larger than “Pill”.As they say, it is better to hear and see once than to read a hundred times, so we invite you to evaluate the video review:
Result:
Already the first version of the beats Pill column is just fire! Loud, compact, made of pleasant to the touch and durable materials. With many useful functions and connectors. It would seem, what more could you want? Let's see what the beats Electronics engineers added next and move on to the next version.What's new in the beats Pill 2.0 wireless speaker
The main innovation of the speaker is the ability to use it not only as an audio system, but also as portable accumulator to charge your other devices. The dimensions, equipment and appearance are practically unchanged. To implement the charging feature, a plug has appeared at the bottom of the speaker, hiding the USB connector. You can insert a cable into it (including the one that comes with the speaker) and charge any of your devices. Convenient, isn't it?Another one new feature- the ability to synchronize the work of two “Pills”. To do this, you need to touch one column twice to the other with the place where the NFC icon is drawn. Voila - now one column is the right channel, and the other is the left channel.
Also changed a little rear end, but this is a small innovation. In this way, you can distinguish the second generation from the first without touching the pill.
And, of course, we cannot leave you without a video review of the Pill 2.0 bluetooth audio system.
Result:
Of course, with the release of Pill 2.0, beats did not turn the universe upside down, but they added some interesting technologies to their speakers, keeping all the positive aspects at the same level.What's new in portable speakers beats Pill+
They didn't skimp on innovations in beats Pill plus. The design, size, characteristics have changed. See for yourself. She was so fed with features that she began to weigh more than 2 times more. Below we will tell you everything.Equipment:
1. Stereo speaker beats Pill+ Black
2. Convenient case for storing and carrying the speaker
3. Lightning/USB-A charging cable, length 1.5 m
4. Electrical adapter with USB connector
5. Instructions
Technical data:
1. Weight: 710g
2. Dimensions: height: 6.36 cm, length: 21 cm, width: 6.92 cm.
3. Wire length: 1.5m
4. Sound: stereo
5. Microphone: yes
6. Volume control: yes
7. Connection: wired (3.5mm stereo jack) or Bluetooth (NFC)
The main feature is in the sound: now a two-channel crossover
Low and high frequencies are now reproduced by different speakers, like in professional sound systems. Whatever music you listen to - Hip-Hop, Rock, Metal or Boogie-Woogie, rest assured - it will sound great. Earlier versions of beats Pill used identical speakers that covered the entire sound spectrum. Those who criticized the early “pills” for their lack of bass are satisfied with the abundance of “bass” in Pill+. Engineers worked not only on appearance, but also over the filling - the sound has become much better.No more hard case, just a pouch. But this is the only negative point in new version. And, well, yes, of course there is also weight and price. weighty, but this allows it to stand firmly and not “sway” under the pressure of the bass it produces.
The speaker is now even more pleasant to the touch Thanks to the silicone coating and nice buttons, you will like it.
Five-stage column charge indicator will not let you miss charging the speaker.
All that's left is the juiciest bits from the beats Pill 2.0 speaker- namely the ability to charge other devices from the speaker, and connect two identical speakers into a stereo pair. For the latter, it is recommended to download the beats Pill+ application, available in the AppStore and GooglePlay.
A very nice innovation is a much more powerful battery. Now you can actually listen to the speaker for 12 hours! On the contrary, recharging time was reduced to only 3 hours. Now you can “hang out” more good music, and sleep less.
We invite you to watch an excellent overseas review from a guy who knows how to do reviews.
That's probably all we wanted to tell you about beats Pill speakers. We hope that this article will help you do right choice.
To read the instructions, select the file in the list that you want to download, click on the "Download" button and you will be redirected to a page where you will need to enter the code from the image. If the answer is correct, a button to receive the file will appear in place of the picture.
If there is a “View” button in the file field, this means that you can view the instructions online, without having to download it to your computer.
If you think the material is not complete or you need Additional Information for this device, for example a driver, additional files for example, firmware or firmware, then you can ask a question to the moderators and members of our community, who will try to quickly respond to your question.
You can also view instructions on your Android device
Short description
Fully wireless system The Pill serves not only as a powerful compact speaker for listening to music, but also as a portable system for receiving phone calls.The Pill speaker is small enough to take your music on the go every day, and syncs with phones and other Bluetooth-enabled devices for Beats by Dr.-quality sound. Dre was with you everywhere. Music, phone calls and movies... you've never heard sound like this before.
Small size, big sound
Despite its compact size, the Pill speaker delivers great sound power. Every room in your home will experience light, soaring highs and deep, booming bass. The Pill system is completely wireless.
Rewind tracks on your phone
Or a laptop, or any other Bluetooth-enabled device at a distance of up to 10 meters. Thanks to the Pill speaker, you can move around in space - taking high-quality music with you wherever you go.
Full portability
This system can be installed anywhere. The Pill speaker is lightweight and small enough to fit into any bag. Among other things, the carrying case is equipped with a convenient carabiner, which can be attached, for example, to a backpack.
Receiving phone calls. The Pill speaker has Bluetooth support and a built-in microphone, allowing you to easily take phone calls with excellent sound quality.
Characteristics
Main characteristics
Bluetooth support
Bluetooth
NFC support
Power supply
Interfaces
Equipment
Color, sizes and weight
| Color | red |
| Overall dimensions (H*W*D) | 5.5*25*6 cm |
| Weight | 310 g |
An important point after purchasing a Beats by Dr. device. Dre Beats Pill (or even before purchasing it) is to read its service instructions. This needs to be done for a few simple reasons:
- to know how to use the device correctly
- to know how to maintain / periodically check the correct operation of the Beats by Dr. product. Dre Beats Pill
- to know what to do in case of an accident Beats by Dr. Dre Beats Pill
If you haven't purchased Beats by Dr. Dre Beats Pill then now is a good time to familiarize yourself with the basic data regarding the product. First, review the first pages of the instructions you will find above. You should find the most important technical data of Beats by Dr. there. Dre Beats Pill - this way you can check whether the equipment meets your requirements. Diving into the following pages of the Beats by Dr. user manual. Dre Beats Pill you will become familiar with all the available functions of the product and information regarding its operation. The information you will receive about Beats by Dr. Dre Beats Pill will certainly help you make your purchasing decisions.
In a situation where you are already the owner Beats by Dr. Dre Beats Pill, but you have not yet read the instructions, you need to do so in connection with the above. Then you will know whether you used the available functions correctly, and whether you made any mistakes that could shorten the life of Beats by Dr. Dre Beats Pill.
However, one of the most important roles that the service manual performs for the user is to help solve problems with Beats by Dr. Dre Beats Pill. Almost always you will find there Troubleshooting, the most common breakdowns and malfunctions of the Beats by Dr. device. Dre Beats Pill along with recommendations regarding methods to solve them. Even if you are unable to solve the problem yourself, the instructions will prompt you to take further steps - contact the customer service center or the nearest service center.
Loading...
