How to run the game over a local network. How to play on a local network? Detailed instructions. How to play Minecraft over a local network

Methods

There are two methods by which you could play with other people.

• The local network.
• Internet.

At their core, they are very similar and do not differ in many respects, but each has its own nuances that need to be remembered. For example, you can create your map long and hard, and then make it available to local game. Don't forget to make a copy, otherwise it will be very disappointing when other players destroy what you painstakingly created.

In any case, you will need some things without which you will not be able to play with other people. This is the Internet, the Minecraft client, “direct” hands. You also need to remember that you will have to make changes to the computer settings, so be careful, the entire responsibility for bringing the PC into a non-working state will fall on your shoulders. Now let's figure out how to play Minecraft with friends.

The local network

Let's imagine that there are a couple of computers without Internet access, and they are located in the same room. Moreover, a local network exists and is configured between them. In this case, you can play Minecraft online. 2 friends must install the same version of the client on both computers. Now the sequence of actions is quite simple:

1. One of the players must create single player game with the desired settings.
2. After that, he needs to press ESC and open the game for multiplayer.
3. A message will appear in the chat about starting a server with a specific IP address. This is what you need to remember.
4. The client also runs on the second computer. Only another player enters the multiplayer mode. If the game does not automatically find the server, then you need to add it by entering the IP that you remembered a little earlier into the search bar.

This way the question of how to play together in Minecraft is resolved. local network.

Imaginary network

If your computers are separated by a huge distance and connected exclusively by the Internet, you can also play as a couple. Exist different ways, how to play Minecraft together over the Internet, so first we will consider an option that does not require advanced computer settings.

To do this, you will need to download and install a utility such as Hamachi. Both friends must install it and register, after which one of them creates a server room in the program, to which his friend must connect. This method creates a virtual private network - an analogue of a home local network, only organized via the Internet. A savvy user has probably already realized that further actions are similar to the previous paragraph. There is only one "but". If your computers cannot see each other, then add Hamachi to your firewall and antivirus exceptions.

Internet

If you don’t want to be tricky again? Theoretically, if you download the same version of the client from one site and perform all the same manipulations as in the first case, you will be able to connect to a friend. On the other hand, you can use Minecraft. Download it from any website that specializes in this game, install it and launch it. After that, all you have to do is send out your address to the people you would like to play with. There is nothing complicated about this. So good luck to you in mastering the cubic world and trying with online play. And most importantly, if something doesn’t work out, don’t be discouraged and try again and again, then you will certainly succeed.

Very often a situation arises when you want to play not only with bots, but also against each other online. To do this, you need a high-quality Internet connection and a company of three or four players. Our article talks about how to play over a local network.

Play online

1. In order to play online, you need to make sure that all computers are connected to one network. To do this, open “Explorer” or “ Total Commander" and check the presence of computers in the "Network Neighborhoods" folder, where the MSHOME or WORKGROUP groups should be located.
2. Next, you should open the game and create a new one. The computer on which the new game was created will be considered the main one. When creating a new game, you must specify the number of participants and a password to enter the game.
3. Next, all participants must connect to the local network. To do this, select “Find servers” in the menu and click on the “Local network” tab. After the network loads, you must click “Join”.

Hamachi

You can also play on a local network using the Hamachi application:

1. Download the program from softonic.com and install it on your computer.
2. Open the program, hover over the triangle and select “Create a new network.”
3. Enter your name and password.
4. Go to a game where you can play online and create a local network.
5. After this, friends must launch the program, enter the name and password (that you created) and start the game.

Multiplayer

Another option that allows you to play over a local network is the multiplayer games feature:

1. Launch the game you are interested in.
2. Select the multiplayer function.
3. In the game creation menu you need to select a map, set everything required parameters and settings. After this, you need to click “create server”.
4. The game will load. All that remains is to recruit the required number of players, since some games do not load without a certain amount participants. Players can communicate in a special chat.

If you want to connect to an already created game, you need to go to multiplayer and select “Connect to game”.

Computer games have quite thoroughly occupied their niche, and many people now know how to play them. This is one of the most popular ways to spend your free time. Playing one-on-one with the computer can be quite boring. The enemies (bots) are not very intelligent, and they do not even have a hint of the slightest ingenuity. They are predictable. It's a different matter to play against a real person who is at his computer and accepts your challenge to fight. This is the main reason to start playing online.

People play against people, despite the fact that good speed local network erases the time frame. Such conditions are as close as possible to the real game and, of course, in this case, the main role games - they involve and require live participation, ceasing to be a banal electronic toy.

In order to understand how to play over a local network, you first need to set it up. Let's look at options for setting it up in different operating systems, as well as how to connect computers with different operating systems so that the speed of the local network does not suffer.

In order to connect only 2 computers, which are located in the same room, into a local network, you will need only 1 RJ-45 cable (crimped in the twisted pair version). Now we just connect 2 computers with a wire and get started. As a rule, to set up it is enough to use the “Network Setup Wizard” and set it to a fixed IP address for of this connection. This can be done by clicking right click mouse on the desired connection and select “Properties” - “Internet Protocol TCP/IP (if specified, then version 4)” - “Properties”. We change the data in the column where you need to indicate the IP address, for example, 192.008.05 on one computer and 192.008.06 on another. We do not touch the default mask, gateway and DNS.

In XP and Vista, you can change this data through “Management” network connections", then select the connection and do everything as described above.

You can most likely imagine how to play on a local network where only 2 people take part. But what if there are more people willing? One local network can include up to 254 computers. The local network address must not begin with the numbers 127.*.*.*. They are not available for use. Start like everyone else 192.168.*.*. A local network address of this type is the standard for small associations of computers.

There are several options for connecting more than two computers.

1. Another (additional) entrance under and, in fact, another card
2. Purchase and connect a “switch”
3. Purchase and connect a router
4. Use specialized software and create a virtual local

Let's consider each option.

1. Buy additional network card not difficult, much more difficult to find a place for her in system unit. But in the case of laptops, this option disappears immediately.
2. An additional device called a switch allows you to connect up to 48 computers. It is possible to create a circuit of several switches and increase the number of connected computers.
3. A router, also known as a router, is capable of connecting computers via wired and wireless communication. The advantage can be called high speed local network and ease of setup. If you configure the router, it will debug itself and distribute certain data to all computers connected to it.
4. If you have Internet access, then it becomes possible to create a virtual local area. Now players from different not only cities, but continents can fight with each other with the same success as playing on a local network with a neighbor on the site.

The most inexpensive (especially for owners unlimited Internet) and the latest option for organizing a gaming local network has become popular. It is convenient and does not require special skills.

if you love computer games and a local network is already established at home or in the office, then you definitely need to learn how to play over a local network.

The principle of creating games on a local network is the same for most.

Let's look at this very principle using the example of one of the most popular games in recent decades - Counter Strike.

Checking the network

Before playing games over a local network, you should make sure that your computers are connected to the network.

Standard tools will help with this operating system.

Open any file manager and see how many cars are in the folder network.

IN computer networks belong to groups called MSHOME or WORKGROUP.

If they are in the net, you can start the game.

Creating a server

You need to launch it and choose a person who will create a new game. His computer will be the server.

In the main menu you need to select the New game section.

After which a window will appear where you can set the necessary options for the future game.

Here you can set a password, protecting yourself from unexpected access to the game by unnecessary participants.

Everywhere you can set a limit on participants.

Launch the game and wait for it to load completely.

Connecting to the server

For other players, in order to get into the game and connect to it, you need to find the item in the main menu Server search(Find Servers) and left-click it.

This is where all newly created games on the local network are displayed.

Then we find exactly the game that was created on the main server and click Join.

After this, the data will be loaded and the rest of the players will join.

conclusions

It should be borne in mind that games that have a multiplayer mode are often created according to a similar principle.

Therefore, if the computer acting as the server finishes the game, all other players will also disconnect.

Main computer can change game settings directly during the game, but for this you need to know special teams written in the menu Console.

The game has long since introduced the ability to create local server in your own world, while everyone who is on the same network will be able to connect to your server. In general, everything is simple, but there are many limitations, everything is described in detail in this article. Select from content desired type settings and follow the steps described.

Setting up a server when you are on the same Wi-Fi or Lan network with another player

If several computers are not far from each other and are on the same network: Wi-Fi or Lan (connected via cable), then you this one will do setting.

Windows: On the computer where the server will be opened, open Start and enter it into the search cmd, open this program:

In the window that opens, enter ipconfig, press enter. We are looking for your local IP, which starts with 192.168.*.* , in the example it is 192.168.1.47 (you will have a different one!), copy it.

MacOS: To find the local IP, open the Terminal, you can enter it into the search by Mac this program and find it, enter it in the window ifconfig |grep inet and look for an IP that starts with 192.168.*.* , copy it.

version with TL icon

We go into our world and into the menu Pauses (Esc) click 31790 (you will have another one).

Now on another computer, which should connect to your server, you also need to open the version with the TL icon (plus, the version of the game must be the same as on the first computer), go to Multiplayer, open .

Now enter in the IP address + port field that we received earlier, in the example this is 192.168.1.47:31790

Setting up a server when playing online with another player using Hamachi

If you physically cannot be on the same network with another player, the computers are far from each other, then you can create a special network using the Internet using Hamachi.

On both computers we do the following: Create a Hamachi account and download their program (after clicking on the link, the Download button is in the center).

Now open TLauncher and select the version with the TL icon and launch the game (it’s also better to log in to the site under your account). If you select without the TL icon, you will not be able to connect to the server without a Mojang license.

We go into our world and into the menu Pauses (Esc) click Open to Lan, a message about the successful opening of the server will appear in the chat, as well as the server port, in the example this is 60000 (you will have another one).

On another computer Click "Connect to existing network", enter the network name and password created earlier. If the connection is successful, your friend’s computer will be visible in the Hamachi window.

Then it is also necessary open the version with the TL icon (plus, the game version must be the same as on the first computer), go to Multiplayer, open Direct connect.

Now we enter into the field the IP address from Hamachi (the computer where the server is open) + the port that we received earlier, in the example this is 25.1.80.229:60000 . If everything is ok, then the connection to the server will occur! You can now play on the server with a friend.

Setting up a local Minecraft server with mods

After you have set up a server for playing in one WiFi networks(Lan) or using Hamachi, you can install mods and play with them with your friends. The instructions are very simple.

We install exactly the same mods on all clients so that everything is identical, plus the Forge version itself must be the same, for example, ForgeOptiFine 1.12.2. Don't forget that the version must have the TL icon!

Now we create and connect to the server using absolutely the same instructions above, depending on your network. Done, you can play with mods in Minecraft!

Possible problems and their solutions

- When connecting to the server, the following message appears: “Invalid session” or “Check your username.”

Solution: You must run the version with the TL icon (otherwise you need a game license), if you run this, check if the checkbox (in the launcher) is checked in “Account Management” -> “Use TLauncher skins”.

- When connecting to the server, the following appears: "Io.netty.channel.AbstractChannel$AnnotatedConnectException: Connection time out: no further information"

Solution: the game could not find information about such a server, which means the network setup was not done correctly. Try disabling the antivirus and firewall on the host computer or configuring it correctly.

- When connecting to the server, chunks are loaded and immediately thrown out of the server (connection disconnected).

Solution: The network setup is correct, but the antivirus and firewall are interrupting the connection. Disable them or configure them correctly.

When connecting to the server, the following appears: 1.14.2: Bad packet ID 26; 1.13.2: Bad packet ID 27; 1.7.10: Stuck on Logging in... or "received string length longer than maximum allowed"

Solution: your nickname is longer than 16 characters, please make it shorter.