Connecting the projector via USB. Solving the problem when a computer or laptop does not see the projector. Cable for connecting the projector to a laptop

If you decide to use a projector for personal or work purposes, for example, holding a conference, you need to know the algorithm for connecting a laptop to the projector, the correct setup sequence and nuances that may arise during the work.

The principle of connecting a projector to a laptop

As a rule, the most basic method is to connect via a VGA connector. If there is such a connector, then you can immediately begin connecting, but you should work with the equipment turned off:

Connect your switched off laptop to the projector. This can be done either directly (if the devices have the same input points) or via a USB cable or a special adapter if the connectors of the projector and laptop do not match.
Initially, turn on the projector first, then the laptop. This must be done in exactly this sequence so that the laptop does not have problems recognizing a new object.

As for the choice of connector, in addition to VGA, there is HDMI, which surpasses the first not only in the quality of the output picture, but also in the sound quality. Therefore, if this connector is available, it is better to use HDMI, and the connection principle is similar to connecting through a VGA connector.

How to connect a projector to a laptop with XP version

Whatever one may say, the most popular version of Windows remains XP. There are some peculiarities of connecting to the projector:

After loading the operating system, right-click on the blank screen. From the drop-down list, select “Properties” and then “Display”;
Then connect the projector to the second output and watch the image of the second monitor appear. This moment does not always happen smoothly, so you can restart the laptop without touching the projector;
On the second monitor that appears, left-click and select the “Extend desktop onto this monitor” option. Here, set the extension that matches the extension of the projector, and click “Apply”;

In the same window there are tabs in which you can make the necessary changes for high-quality display of video recordings;
When work with the projector has already been completed, do not forget to return the previous settings to your laptop so as not to look for a problem where there is none later;
Do not rush to unplug the projector. Press the shutdown button and wait until the device cools down, and then unplug it.

The nuances of connecting a wireless laptop

The following are the nuances for setting up the work:

If you have a wireless projector, then you need to acquire drivers and a program to establish their “communication” with the laptop. Then connect the so-called antennas (they look like ordinary flash cards) both to the laptop and to the projector. As soon as the light turns green, Power devices will begin their interaction.
To seamlessly connect a laptop to a projector, there is a program in open access, which is called "Connecting to a Projector". It may be present as a bonus in your laptop. There should be no difficulties here - you just need to launch it and use the proposed properties for their intended purpose.
By using hotkeys You can select image output modes: turn off the projector or display the image only on the projector. The laptop will be inactive, so if additional “interventions” are suddenly needed, it is better not to use this function. It is also proposed to expand the screen, improve image clarity - these are all the keys from F1 to F

What to do if there is a black screen after connecting?

If after these manipulations you see a black screen with the words “No signal”, then you should check the image settings. Namely, the resolution that is supported by the projector should be set on your laptop:

Go to this path: Start - Control Panel - Display - Screen Settings. Here you can set not only the main and secondary screens, but also bring the screen resolution in line with the projector resolution.
Here you can set the screen orientation depending on the playback object.

If after the work done the image is not displayed, then you can use the keys to switch to an external monitor, most often this key is F4. If you don’t find such a key or nothing happens after pressing it, use the Win+P combination on the English keyboard.

Connecting a projector is not the most difficult task, but if you have never done this, some aspects of the setup may seem incomprehensible. But if you figure out how to connect a projector to a laptop using one of the available ways, no problems will arise.

Connecting equipment

Before you can configure display settings, you must connect the equipment. Typically a VGA or HDMI cable is used for the connection. If your laptop has the same connector, then you just need to insert the cable and turn on the device.

It is preferable to use an HDMI connection. Therefore, if you are just going to buy a projector, pay attention to devices that support HDMI - an interface that allows you to transmit high-definition images.

If the connectors on the projector and laptop do not match, then the connection will have to be made through an adapter. Using an adapter may uncritically reduce image quality, but this is usually not noticeable with the naked eye.

You need to connect switched off devices together with a cable. After connecting, the projector turns on first, then the laptop. This procedure allows you to avoid a situation where the laptop does not see the projection equipment.

Image Settings

If the connection is made correctly, then when you turn on the laptop will precede the projector as an external screen and immediately display the image on the wall. The picture may be distorted, this is especially noticeable on letters that are floating. This problem usually occurs when the screen resolutions of the laptop and the projector do not match.

See what resolution your projection equipment supports. Usually this is 800x600 or 1024x768, but expensive models can have 1920x1080. In the resolution settings on the laptop you need to set the same value.

On Windows 10 you will not find context menu desktop section "Screen resolution". Here the resolution is adjusted through the screen settings.

When the connection is established and you see a normal image on the wall without distortion, you can proceed to selecting the display mode.

Display Modes

If your laptop is running Windows 7, open the Start menu and write in search bar"Connecting to a projector." A link to the built-in application will appear, open it to customize the display. Instead of navigating through Start, you can use the Win+P keyboard shortcut. This combination works in everyone Windows versions, except XP, so remember it.

A total of four display modes are available:

Only the computer - a picture on the laptop screen, the projector does not broadcast anything.
Duplicate – the image from the laptop display is completely copied onto the wall through the projector. This mode is most often used for presentations.
Expand – the desktop is divided into two halves. The right side of the desktop is displayed through a projector. The left one remains on the laptop screen. By moving program windows to the right side, you decide what the audience will see.
Projector only – the laptop screen is inactive, the image goes only to the projection equipment.

On Windows 10, the names of the items are different, but their meaning is the same: for example, instead of “Duplicate” on the “ten” there will be an item “Repeating”.

On laptops, you can use function keys instead of the projection menu. The Fn button in combination with one of the keys from the F1-F12 row also changes the display mode. The order of changes is saved: one click - the image will be duplicated, the next click - the image will expand to the desktop and the projector, dividing the screen completely, etc.

On different models laptops use different combinations. For example, to enable repeating or extended mode on an ASUS laptop, you need to press the combination Fn+F8. To understand which key from the F1-F12 row is right for you, pay attention to the icons. Required button will contain an image of two monitors.

You can also select the display mode through the “Screen resolution” section of the context menu. There is a “Multiple Screens” field, which presents the already iconic options: duplicate, expand, only screen 1 and only screen 2.

In principle, choosing the active display is the same on all versions of Windows, but if you have connected a projector to a laptop running XP and it sees the connected hardware, the order will be slightly different.

After finishing your presentation, be sure to set the settings to the same settings as before connecting the projector, otherwise the image on your laptop will not be the same as what you are used to.

Working in PowerPoint

If you're going to show your slides through PowerPoint, there's one more small tweak you may need to make. It's about choosing a display to display. The audience sees the slides through a projector, but something else is displayed on the monitor screen: for example, the text of the report.

Before selecting a screen, you must connect and set up the projector. Once your equipment is ready to go, go to the Slide Show tab in PowerPoint and select your projection equipment in the Show Presentation On box.

Another handy feature is the presenter mode. When activated, notes and additional buttons will appear on the projected image to help you control your presentation.

LookForNotebook.ru

How to connect a projector to a laptop

Laptop monitors are quite small, so showing presentations to the general public often poses problems. For this purpose, there is a projector that can increase the overall diagonal of the monitor.

Unplug your laptop and projector. Take the VGA cable and run it from the projector to the laptop. Connect it. On most laptops, the VGA cable connector is blue. First turn on the projector and then the laptop.

Now you need to adjust the image as it should appear automatically when you turn on the laptop. But in some cases, people have to turn it on themselves. Wait until the operating system loads completely and press the key combination “Fn” + the button to switch between screens. It is located differently on each computer, but it always shows two monitors. For example, on laptops from Acer this image is placed on the “F6” button, on laptops from Dell - “F1”.

By holding down the “Fn” key + the corresponding button, you can alternately switch the picture image to one of three possible modes. At first, only the projector will turn on, and the laptop screen will remain black, i.e. The image will only be shown on the projector. When pressed again, the image will appear on the laptop screen and remain on the projector. If the image appears blurry on one of the devices, adjust it in the screen properties. Pressing the key combination a third time will turn off the image on the projector and it will remain only on the laptop screen.

If you are unable to display an image on the projector, it is likely that the function buttons on your laptop are disabled. In some cases, the projector may not fit the laptop video adapter. If your video adapter is outdated, purchase a newer one. All modern models are equipped with a DVI connection. It is more versatile and has high picture quality. But keep in mind that you can only connect a projector to this connector if it has a corresponding output.

There is another way to connect a laptop to a projector. The Windows 7 operating system includes the Connect to a Projector program. When you open this program, you will see icons. Clicking the "Turn Off Projector" icon will turn off the projector. If you want to duplicate the image from your laptop to the projector, click the "Duplicate" icon. The same image will appear on both monitors.

If you click on the Expand icon, the projector will display right part desktop, and on the laptop screen - left. By moving the mouse cursor you can move the image. Another icon is for turning off the laptop screen so that the image remains on the projector. This method greatly simplifies the work if you have Windows 7 installed on your laptop.

For Windows 8 there is also a lightweight connection option. Go to “Start”, then to “Control Panel” - “Appearance and Personalization” - “Display” - “Screen Resolution”. You will see the option to select a mobile PC (laptop) display or connect an external monitor. Selecting the second option will display the image on the projector.

Now let's look at the possibility of connecting the projector via Windows XP. On an empty space on your desktop, click right click mice. In the context menu that opens, select “Properties” and “Display”. In the “Settings” tab, select the laptop screen or external monitor connection.

Now you know that there is no difficulty in connecting a projector to a laptop. Before connecting, make sure that the laptop and projector are compatible and have the necessary connectors for connection.

SovetClub.ru

How to connect a projector to a laptop or computer and set it up

Connecting a projector to a laptop is carried out through simple manipulations, but, unfortunately, difficulties are often encountered along this path. When devices refuse to pair automatically, this means that the default system settings have been lost, or that these devices simply “do not understand” each other. How to connect a projector to a laptop in this case? The connection is being set up manually: For this purpose, the operating system provides certain sets of keys. In the absence of such, setting parameters is carried out by forcing changes in configurations.

Wired connection

A multimedia projector, regardless of model, connects to a computer or laptop via VGA or HDMI cable. For content High Quality HDMI would be preferable.

The connection algorithm is elementary:

Before turning on the projector, unplug both devices;
insert the plug into the corresponding connector;
turn on the projector, then the computer.

In cases where the required connector is not available, you can use a special adapter. This can happen when the video card only has a DVI connector, but the projector has VGA or HDMI. Using an adapter slightly reduces the quality of the content. The projector turns on first, otherwise the computer does not see it.

Special adapter

Wireless connection

You can also synchronize devices via Wi-Fi protocol, today this method is gaining popularity. To activate, you need to install drivers, but in the case of Windows 7, usually the standard ones are sufficient.

If the disk is lost, the application can be downloaded online from the website trademark projector.

Before you connect the projector to your laptop, you need to install WiFi antennas into the USB connectors of the projector and PC; in appearance they resemble a small flash drive. The green indicator light informs you that the connection was successful.

It's worth noting that not all projectors that support Wi-Fi will project video. Some models can only be connected to control equipment; this nuance must be clarified when purchasing. A wired connection is more reliable and practical: the HDMI plug, for example, is designed to transmit excellent quality video without interference.

Displaying content in the required mode

Theoretically, after connecting the cable to the appropriate connector, the picture should be displayed automatically. In some cases, when the settings are incorrect, the user must make the necessary changes to display the content. It is known that each version of the operating system has its own characteristics, therefore there is no uniform procedure for action.

Then, the user has access to four picture display modes of the connected projector.

Duplication (repetition) – when video from a computer or laptop is duplicated on an external screen.
Computer only - content is played on the laptop display, and the external screen is not used at this time.
Expansion - the desktop is divided into two parts, its left side is displayed on the PC monitor, and the right side is displayed through the projector.
Projector only – information will be projected only on a large screen.

Useful tips for Power Point

The office program Power Point is “tailored” for presentations; it is often used because it is simple and convenient. There are some peculiarities of work here, for example, big screen You can display slides and the text of a report or lecture on the PC display.

The settings do not take much time: after synchronizing the projector with the PC, go to the program and in the top panel look for “Slide show” - “Show presentation”. Check the box next to “Projection equipment”. Here you can find “Speaker Mode”; if you activate it, various auxiliary tools for conducting lectures will be displayed on the screen - additional buttons or notes.

Manual image debugging

Sometimes pictures or letters become blurred or “float” - this happens when the monitor resolution settings on the PC are incorrect. To maximize quality, set your computer's resolution to match the projector's specifications. In this case, the projector settings do not change.

How to change settings on a computer/laptop (for Windows platforms 7/Vista):

to go into the computer settings, you need to open the menu with the right mouse button (click on the desktop);
select “Screen resolution” and set the correct value (like the projector);
Save the settings by clicking the “Ok” button.

Windows 10 settings are a little different, here the Resolution item is located in the Display Settings section. Click "Start" and find the "System" tab, on the right side of the window, scroll to the bottom of the page and open "Advanced display options." Then everything is simple: select the desired value and save the settings.

This completes the task of how to connect a projector to a computer. After connection, the user can select a convenient output mode for holding a presentation or watching a video at home.

Tehnika.expert

Connecting the projector to a computer or laptop

A projector is an indispensable device when it comes to holding various presentations. It can be used to show images and slides saved on your computer to a large audience. But before starting the presentation, you need to connect the projector to your laptop or computer and configure the equipment correctly.

Connecting devices

Typically, the connection between the projector and computer is made using a VGA or HDMI cable. Sometimes, however, you have to use adapters - for example, you connected a video card to a computer, but it only has a DVI output.

Important! First, run the cable between the computer and the projector. Only after this can both devices be connected to the network.

Image output

The easiest way is to use projection equipment as your main monitor.
Then you won't need to produce any additional settings, provided that the resolution is correct.

If the signal and projector have different resolutions, the image will be displayed distorted. This is especially noticeable in the text: the letters become uneven and illegible.

If you encounter such a problem, you will have to connect the main monitor and configure the image output settings in the screen properties.

Additional monitor

So, you have simultaneously connected a monitor and projection equipment to your video card. Now you need to configure the image display order. For this:

Using a laptop

When giving presentations, users usually use a laptop, as it is much easier to bring and set up in any room. Connecting a projector to a laptop is as easy as connecting to a computer, but there are some setup features.

Function keys F1....F12 on a laptop always have additional graphic symbols that are difficult to find on a keyboard for a desktop computer. On one of the keys you can see an image of a monitor and a laptop.

Pressing such a function key (for example, F8 on ASUS laptops) in combination with the Fn button allows you to quickly switch between image output modes:

External monitor– the picture is displayed on the projector, the laptop screen is turned off.
Cloning - the same picture through the projector and on the laptop screen. If the resolution is different, then one image will be of poorer quality. You can fix this in the screen properties.
Internal monitor – broadcast only to the laptop screen.

Alternatively, the projector can be connected to a laptop via Wi-Fi. However, there are not many models that support such technologies, and the usual connection with using HDMI or VGA cable it will be much more practical.

By the way, it will be convenient if you connect wireless mouse– with its help it is much easier to manage the presentation.

Features of using Power Point

The vast majority of presentations are made and played in public using special program Power Point, which is included in standard package office applications Microsoft Office.

Due to duty or educational necessity, everyone has come across this program, but only a few know how to use it correctly. If you are using Power Point 2003, expand the Slide Show menu in the top bar and select Presentation Settings.
On the right you can see the “Multiple monitors” field, where in a special line you can specify the equipment on which the image will be displayed. Specify the projector that you connected to your computer or laptop.
Your presentation will now be output through the projector; on the main monitor, you can solve other problems at this time - for example, open a document with your speech and read it out.

Another handy feature is to check the “Show presenter view” checkbox. In this case, right during the presentation, auxiliary elements will appear on the main monitor: notes for the slide, time, previous and next slide.

In addition, on the right there will be two function buttons with which you can end the display or temporarily turn off the image. In later versions of the program, all of the listed features are retained; the only difference is that the “Demo Settings” item is not in the drop-down menu, but in the panel that appears when you click on the “Slide Show” tab.

Conclusion

You learned how to connect a projector to a computer or laptop, and then properly configure the equipment by selecting one of the possible image output modes. In addition, you now know some of the secrets of Power Point that will make your presentation clearer and more consistent.

However, at the connection stage and software settings The projector does not finish working. It is also important to install this equipment correctly, calculating the projection distance and ratio so that the image does not lose sharpness or become blurred.

To solve this problem, you can use a special calculator, but usually the familiar method of practical testing, in which the projector is installed and adjusted until the picture quality seems to be the best, is sufficient.

mysettings.ru

How to connect a projector to a computer and laptop - simple solutions for the perfect effect

Working with a video projector opens up wide opportunities for high-quality and effective presentations, business meetings, and seminars. Despite the apparent simplicity of connecting to a computer, this task sometimes causes serious difficulties. We will try to consider the main subtleties of high-quality setup without unnecessary waste of time and risks for a successful event.

Learn how to connect a projector to a computer or laptop

Let's consider simple tips and connection principles. As a rule, connecting does not involve any particular difficulties - you just need to take into account some nuances, which we will talk about in more detail.

Why and how to connect a projector to a laptop

IN certain moment Every owner of a computer or laptop is beginning to realize the rather miniature size of their screen. If a standard computer also supports the ability to connect other monitors, then in the case of a laptop you cannot count on such an opportunity. To solve this problem, you should take care of connecting a video projector that allows you to increase the display diagonal.

If you've never connected a projector, some setup steps may seem confusing.

How to connect a projector to a Windows 7 and XP laptop - let's get to practice

First of all, turn off the power to both devices, including the laptop and video projector. They should be turned off by pulling out network cables from sockets. We stretch the VGA cable from the projector to our laptop. Next you need to connect this cable. The first thing after that is to turn on the video projector, connect to the electrical network, and then connect the laptop.

After this, the entire simple connection procedure is successfully completed. If necessary, all we have to do is adjust the image.

Usually the image appears automatically. However, in rare cases there may be a problem of lack of automatic switching on. In this case, we wait until operating system fully loaded, then use the Fn + “screen transition key” combination. Different laptop models may use different keyboard shortcuts.

Press Fn and the screen switch key. It has different locations on different models.

In fact, connecting a projector to a computer is practically no different from connecting a second monitor. Although it is worth recognizing that some differences exist, so characteristic nuances should be noted.

If the functionality of a particular video projector supports the ability to process a digital signal, producing a high-quality output image, a more rational solution would be to work with digital channel data transmission. If the projector has only analog ports, then a more logical option is to switch the monitor to the digital port of the video card. We carry out the appropriate actions with our monitor.

This is how a projector works when turned on

If your video card has VGA and DVI ports, and both devices only have VGA ports, you should purchase an additional DVI-VGA cable. Its cost is low and can be easily found on the Internet or various digital equipment stores. Of course, this option will lead to a decrease in picture quality. However, it will be possible to connect both devices at once. Next, connect the projector to a free video card slot. Turn on the projector. After switching on personal computer We wait for the operating system to load.

We can only wish you successful presentations and events. And, of course, don’t forget about valuable advice - try to connect the video projector in advance so that you have enough time before the event itself, without encountering difficulties and problems at the most inopportune moment.

With a second screen, you can easily view multiple open applications simultaneously. You can also connect a projector so that the screen can be seen by everyone in the room.

Most monitors and projectors can be connected using a DVI, VGA or HDMI cable. (Some devices can even be connected wirelessly.) Your computer may contain one or more of these ports.

Connecting a second monitor or projector to a computer allows you to:

Interact with the four corners of any of the screens using the mouse or the edges of the touch screen to open the Start screen, function bars, or recently used apps;
viewing multiple open windows on each screen with the ability to launch applications in each window;
customize screens, place the taskbar on one or all displays to move applications between screens.

Connecting a second monitor to a computer

Most monitors and projectors have a corresponding port (DVI, VGA or HDMI) to connect a device using a cable. If your computer only has one DVI port, which is already occupied, you can use a custom monitor cable provided by some equipment manufacturers that allows you to split the signal from one DVI port to two monitors.

Notes:

When desktop computer Requires a video card with two DVI, VGA or HDMI ports.
If your monitor or projector comes with a cable that doesn't fit the ports on your computer, you can use an adapter to convert one type of port to another type.

To connect an additional monitor to your computer

Find a free video port on your computer.
Connect the appropriate cable from the second monitor to this port.

The Windows operating system must automatically detect and install the monitor.

Connecting the Projector to a Computer

For wired connections, connect the projector cord to the VGA, DVI, or HDMI port. In most cases, Windows will automatically detect and install the projector.

If Windows detects the projector's Wi-Fi, you can connect to it.

To establish a Wi-Fi connection with the projector

Quickly move your finger from the right edge to the center of the screen, and then tap the panel Devices. (If you're using a mouse, select the bottom-right corner of the screen, move your mouse pointer up, and then select the Devices panel.)
Tap Other screen and then press the key Add Wi-Fi screen.
Select the projector from the list of found devices and follow the on-screen instructions.

Customize the content of your monitors

After connecting a second monitor or connecting a projector, you can select the appropriate screen options.

Quickly move your finger from the right edge to the center of the screen, and then tap the Devices panel. (If you're using a mouse, select the bottom-right corner of the screen, move your mouse pointer up, and then select the Devices panel.)
Click the Other Screen button and select one of the following functions:
- Computer screen only. The entire contents of the computer screen will appear.
- Duplicate. Both screens will display the same content.
- Expand. The entire image will be expanded onto two screens, and you can drag and move elements between them.
- Second screen only. All images will be displayed on the connected additional screen. The first screen will be blank.

Using the taskbar on all screens

At correct setting second monitor or projector, you may find it useful to have multiple taskbars to make it easier to switch between applications and files on the desktop.

Here's how to show taskbars on all screens and change how taskbar buttons appear on them.

Quickly slide your finger inward from the right edge of the screen, tap the Search button (if you're using a mouse, select the top-right corner of the screen and then tap the Search button), and then in the search field, type Taskbar and Navigation.
Click the button Taskbar and Navigation.
In chapter Multiple screens check the box Show taskbar on all screens and select the appropriate options to configure Show taskbar buttons And Buttons on other taskbars.
Click OK button.

Moving apps across screens

Applications can be moved between screens and within the same screen.

To move an application from the Windows Online Store within the screen, press the Win key + ← or the Win key + → .

To move an application from the Windows Online Store to another monitor, press the Win key + Shift + ← or the Win key + Shift + → .

To move a desktop app located on the left side of the screen to the center and right of the screen, and then to the second monitor, press the Win key + → twice and the Win key + Shift + ← .

Controlling cursor behavior when one monitor is touch-sensitive

If you are connected to your computer as touch screen, so without such a screen, you may need to change the cursor settings.

Quickly slide your finger inward from the right edge of the screen, click the Search button (or if you're using a mouse, select the top right corner of the screen and then click the Search button), enter , and then press the key or select Tablet PC Settings.
Click the Settings button.
If you are prompted for a choice, press the Touch button and follow the onscreen instructions.

To do this, it is enough to do three simple steps:

HOW TO CONNECT A PROJECTOR TO A LAPTOP?

Connecting a projector to a laptop is quite simple.
To do this, just take three simple steps:
1. Connect devices using a cable.
2. Set up the display on your laptop.
3. Select screen display mode.
If any of this raises questions for you, read the article and you will definitely find the answer.

CABLE FOR CONNECTING THE PROJECTOR TO THE LAPTOP

Some models of projection technology allow you to use wireless connection and allow, however, the most popular and in demand connection remains via cable.

Depending on the connectors available on your devices, you can use VGA or HDMI cables. Both types are quite reliable and common, but HDMI has several advantages. This connection is faster and will allow you to watch videos without delays, even in Blue-Ray quality. The second advantage worth mentioning is the ability to transmit sound without using an additional audio cable.

Devices must be connected in a switched off state. After connecting, you need to turn on the projector first, the laptop later. This way you can avoid a situation where the computer does not detect the video projector.

HOW TO ADJUST THE IMAGE ON YOUR LAPTOP.

After completing the above operation, your laptop will recognize the projector as a monitor and automatically output the projection. The picture quality will be minimal, perhaps even distorted and floating. Don't be alarmed - this problem occurs when there is a resolution difference between the laptop screen and the video projector. To correct this problem pretty easy. Look in the projector's specifications for the native resolution (matrix resolution) and set the same in the computer settings. For this:

1. Right click on desktop

2. In the pop-up menu, select the “screen resolution” line and left-click.

3. In the menu that opens, in the “resolution” line, select your value.

After such manipulations, the image should be maximum quality, then adjust the focus and tilt of the keystone on the projector if necessary.

Having adjusted the picture quality to your satisfaction, you can move on to the next step.

SELECTION OF PROJECTION DISPLAY MODE.

By default, on all computers running Windows system There is a screen expansion mode. Therefore, do not be alarmed when you see your desktop without icons and shortcuts on the projection. In order to use this area, you just need to move the cursor to the right. In essence, it will be an extension of your desktop. You can transfer to this area open windows and shortcuts, just like you do on your main screen.

To change the mode, you can use the built-in application, but the easiest way to do this is using a key combination. By simultaneously pressing “Win+P” on the keyboard, a menu will appear on the screen allowing you to select the desired mode.

You have four modes at your disposal: desktop extension, screen mirroring, and display only on one or another device.

In addition, the service key can be used to switch modes on a laptop. Pressing the Fn button and the top row key with the 2 screen icon (shown in the picture) also switches display modes.

We hope our article helped you figure out how to connect a projector to a laptop. And you coped with this task. If you have any questions, please contact our specialists for advice. We will always be happy to help you!

Let's look at simple tips and connection principles. As a rule, connecting does not involve any particular difficulties - you just need to take into account some nuances, which we will talk about in more detail.

Why and how to connect a projector to a laptop

At a certain point, every owner of a computer or laptop begins to realize the rather miniature size of their screen. If a standard computer also supports the ability to connect other monitors, then in the case of a laptop you cannot count on such an opportunity. To solve this problem, you should take care of something that allows you to increase the display diagonal.

How to connect a projector to a Windows 7 and XP laptop - let's get to practice

First of all, turn off the power to both devices, including the laptop and video projector. They should be turned off by unplugging the network cables from the sockets. We stretch the VGA cable from the projector to our laptop. Next you need to connect this cable. The first thing after that is to turn on the video projector, connect to the electrical network, and then connect the laptop.

After this, the entire simple connection procedure is successfully completed. If necessary, all we have to do is adjust the image.

Usually the image appears automatically. However, in rare cases, there may be a problem of lack of automatic activation. In this case, wait until the operating system has fully loaded, then use the Fn + “screen transition key” combination. Different laptop models may use different keyboard shortcuts.