One of the most important parts of a computer system unit is the hard drive. It stores the necessary data, some user information. A hard drive is a delicate thing and requires proper care. Otherwise, there is a high risk of losing everything accumulated and downloaded.
One of the options for saving information from a hard drive is backups to cloud services and/or to external media. The first procedure is characterized by its duration and absorbs a lot of traffic, while the second tires with constant copying. To limit the main storage medium from such problems, you need to acquire a couple of smart utilities for diagnosing regular and combined hard drives (HDD, HDD+SSD), as well as external SSD drives. The last two will be discussed today.
Some applications help to promptly detect problem areas in the system areas of the drive and warn the user in advance about the need for a technical recovery procedure, while others solve this issue comprehensively, that is, they search for, find, correct and prevent further relapses.
So, we present to your attention a list of programs for checking an SSD disk for errors. All applications are respected by both professional and amateur users and have more than once helped both of them solve problems with high-speed hard drives.
Crystal Disk Mark
This program for checking hard drives (SSD, HDD) and external media information. The utility began its history more than 10 years ago, so the developers are burdened with a wealth of experience, as well as user support.
By and large, we have a program for checking SSD drives for speed. That is, the application allows the user to find out the real parameters for reading and writing data to a hard drive or any other drive. Moreover, the Seq algorithm is used as the main analysis tool. The latter is used by almost all manufacturers of high-speed internal and external SSD drives.
This algorithm allows you to compare the numbers obtained as a result of the test with those specified in the specifications for the equipment. If they differ greatly, then you can sound the alarm and resort to the help of heavier software tools. It is recommended to check the speed of an SSD hard drive at least once a week, because a problem that has just appeared is much easier to fix than one that is running and has been doing a good job on your hard drive.
HDDScan
This program for checking SSD drives will provide the user with all technical information about the device and tests it using different algorithms. The utility is distinguished by an abundance of functionality.
Here you can find out the temperature of the internal and external SSD drive, as well as other connected drives. The application identifies individual sectors that are working slowly, and a rich database of hard drives allows you to compare the received reports with the original specifications of the manufacturers.
Distinctive features of the software
The HDDScan SSD disk checking program supports both modern arrays, and outdated connection interfaces, that is, it works not only with high-speed media, but also with equipment on SATA cables and old memory cards.
The fly in the ointment here is the indication of the process of performing current tasks, or rather the absence of it as such. Linear diagnostics of solid-state media have never been fast, even on powerful computers, so the absence of the usual strip with percentage completion is confusing and alarming: sometimes it seems that the program for checking SSD drives has simply frozen.
Seagate SeaTools
This is a branded and fastidious Kingston media and devices from Toshiba, alas, do not work with this application, but devices from Western Digital feel quite comfortable in tandem with this utility.
The software allows you to conduct three main types of analysis:
- short, where only superficial testing is performed to identify obvious problems;
- express diagnostics with short reading of sequential arrays (checking an SSD disk for bad sectors);
- a complete analysis of everything. The last procedure will take a lot of time, but according to its results, you will find, as they say, even a needle in the hole. That is, not a single broken sector or any problem will be hidden even in the most hidden wilds hard drive.
Another useful feature of this program for checking SSD drives is monitoring and installing the latest software for your hard drive. You will always know about the exit new firmware or some drivers.
WD Data Lifeguard Diagnostic
Another proprietary utility, but from Western Digital. The software is more loyal to competitors, so this program can be used (in most cases) on devices from Seagate, Kingston or Toshiba.
It should also be noted that this utility It does not have a simple and intuitive interface, so it cannot be recommended for beginners. In addition, one of the reasons why fans should stay away from the functionality of this application is the presence of irreversible modes, such as deep formatting of tracks and sectors. After executing, for example, the WRITE ZEROS function, data recovery is out of the question.
Another distinctive feature of this program for an SSD disk is checking the wear of the hard drive and subsequently correcting problems, that is, in-depth analysis and reassignment of damaged areas. In this case, the utility places special marks on the bad sectors, after which operating system It is prohibited to write any data in this place. As a result, we have not just diagnostic software, but universal solution to analyze and fix drive problems.
Victoria HDD
This is one of the oldest utilities in this area. “Victoria” appeared at the dawn of ATA interfaces, and this is more than fifteen years ago. Despite its venerable age and mediocre support from developers, the program copes well with the tasks assigned to it and outshines a good half of modern software in this segment.
"Victoria" copes well with ordinary express diagnostics and reassignment bad sectors. In addition, the interface provides a section for checking the connection of the device with motherboard. That is, in real time you can see the condition of the loop and the voltage supplied to the hard drive.
Software features
One of the positive and at the same time negative aspects of the program is the interface. On the one hand, we have an extremely simple code that works as if separately from the operating system and can be launched, as they say, on the knee, that is, in a DOS or BIOS environment. But on the other hand, many find it difficult to use the utility, because there are simply no official builds for Windows and they have to be tricky with command line or download amateur versions adapted for windows.
Despite such problems, the program is stable and efficient. In addition, the software is absolutely free and takes up very little space, which allows you to put it not just in any drive, but even in system area disk, where there is space and so to capacity.
The utility seems to be simple, but it cannot be recommended for beginners. Here you need at least basic knowledge and understanding of the diagnostic and recovery process hard drives. That is, for those who are accustomed to clicking on the start button and then clicking OK in the “Done” window, this software will not suit you.
HD Tune
This is a fairly simple shareware application for diagnosing regular and high-speed software. The software works in two standard modes: express software analysis and low-level error detection in reading mode.
It should also be noted that the tools used by the utility have proprietary algorithms, so they can detect most non-standard errors where ordinary applications will simply pass by. The software supports almost all known connection interfaces, from classic SATA drives to modern SSD protocols, so there should be no problems with synchronization.
Distinctive features of the utility
If you purchase a paid license, the functionality of the program expands significantly, and most importantly (for many), advertising and constantly pop-up blocks with offers to buy some trinket disappear.
The professional version has not only diagnostic capabilities, but also resuscitation capabilities. The latter imply a prohibition of writing to bad sectors, and in rare cases, restoration of them to full functionality. The Pro version costs about 2,000 rubles, and you can purchase it on the developer’s official website. If you're lucky, you can buy the software at a significant discount from some distributor on a special offer or even get it in addition to a more expensive product.
HDD Regenerator
This is already a whole complex where the user has access to a huge range of functionality for diagnosing and solving problems associated with hard drives and SSD hard drives, among others. The software uses its own search methods and algorithms to correct bad sectors as the main management tools.
Unlike the previous utility, Regenerator not only denies the operating system access to problem areas of the disk, but also tries to restore the latter. Combination and superficial formatting at high and low levels allows (sometimes) to bring bad sectors back to life.
It should also be noted that the utility works with all known drive interfaces, so there are no problems with synchronization. The software will handle both old SATA drives and brand new combined or external SSD drives.
Features of the program
The only disadvantage of such a powerful tool for working with hard drives is the cost of the license. On the official website of the developer you can buy the program for 5,000 rubles. In other distribution networks you can get a discount, but not more than 500 rubles, so this software cannot be called inexpensive.
Despite such a high cost, the program is worth its investment, especially if your system unit more than one hard drive or a whole collection of flash drives and other external drives. The utility will save your information more than once or twice and treat your devices from specific ailments. Professional users have noticed that regular use of this program significantly increases the service life of hard drives (from 15 to 40% depending on the type and volume). Therefore, the software can be safely recommended to all those who care about their drives, as well as the information stored on them.
Solid state hard drives have become a real innovation in the world computer technology. The operating speed of SSD drives is many times higher than that of the average hard drive (HDD).
As a consequence, a large number personal computers and laptops began to be released complete with new drives, and users often resort to replacing the old type of drive with a new one.
Unfortunately, standard features operating room Windows systems do not give the opportunity to produce fine tuning and optimization of SSD drives. A large amount of software has been created specifically for these tasks. Among them, it is especially popular free program SSD Tweaker.
You can download SSD Tweaker for free from our website. It is available in the form of a kind of manager that has a simple and intuitive interface. Using the program, make flexible setup Even not the most advanced users can use an SSD drive for their OS, which is undoubtedly a plus in its piggy bank.
Using the power of SSD Tweaker, you can centrally configure your drive in just a few simple steps. All actions will be carried out semi-automatically with minimal participation from you.
So, after a few simple operations, SSD Tweaker will configure the Windows indexing mechanism, the system defragmentation service, adjust the system cache area and adjust all file system parameters.
Optimal use of hard drive memory can be achieved using the special Superfetch technology, which is available in the program's arsenal. Also, you can find special tools with which you can manage file swap settings. The DIMP system will help you monitor the power consumption status of the device.
Unlike other programs for configuring and optimizing the operation of solid-state drives, the utility can be used completely free of charge. In addition, the program interface can be presented in Russian.
Solid-state drives (SSDs) have become a fixture in our lives. Giving the user many advantages compared to traditional HDDs (more high speed reading and writing information, quiet operation, low power consumption and high resistance to mechanical damage), they, however, are not without a number of disadvantages (for example, shorter operating time compared to HDD). Accordingly, their condition must be monitored from time to time in order to timely track negative changes in their functionality. In this material I will tell you how to check an SSD disk for errors, how tools will help us find out its performance and how to use them.
Limited SSD resource
If you are wondering about checking an SSD disk for errors and performance, it means that a situation may have arisen in which your SSD has stopped functioning normally. This is primarily due to the fact that SSD ( Solid State Drive– solid state drive) allows you to write information to yourself a limited number of times (the resource of competitors SSD - HDD drives in this regard is not limited). Typically, manufacturers provide a warranty on their SSD drives for a period of 3 years (or for the volume of recorded data of 35 terabytes of data, which is approximately equal to 20 gigabytes per day). Those who actively use their SSD drive (on various 24/7 servers, etc.) may experience faster failure of SSD devices.
Well, those users who work with their PC in normal, “household” mode can enjoy fast work their SSD for 5 or more years. In the last article, I described in detail who I recommend setting up the disk for this OS.
How to check an SSD disk for errors and performance - list of programs
If you do not need to know the performance of the SSD drive, then you should use the functionality of the appropriate programs that will allow you to test the ssd for errors. Below I will list these programs and give their corresponding characteristics:
CrystalDiskInfo program
It is a free utility that will check the read-write speed of your disk, displays its overall health, temperature, supports S.M.A.R.T (hard disk health assessment technology) and much more. This program and CrystalDiskInfo has two main versions (installable and portable), and in the case of the installable version, you can monitor the status of your disks in real time using the program icon in the system tray. If the pressing question is how to check an ssd for bad sectors, then the CrystalDiskInfo program will effectively help you with this.
- To use the program, download it, install and run.
- The program will scan your HDD to assess its condition, errors, and so on, and then give you the result.
- All main actions are concentrated in the “Service” tab of the main menu (in particular, if necessary, there you can set the disk rescan function).
SSD Life Program
Determine performance and SSD errors, the SSD Life program can also help us. This one is conditional free utility written specifically for working with SSD drives, allowing you to proactively monitor declines in their performance. As in the case of CrystalDiskInfo, this program has two versions - portable (produces a report on the status of the disk immediately upon launch, without additional installation), and installation, displaying the disk status in real time so that the user can monitor the situation in advance.
Working window The program is extremely simple, on it you will see the predicted operating time of your disk, an assessment of its condition, how long it has already worked, and so on. To update report data, use the corresponding keys below.
SSDRready program
SSD diagnostics can also be carried out using the SSDReady program, created specifically for monitoring the condition of your SSD drive, assessing its potential operating time and other relevant statistics. It keeps track of the amount of data written and read from the disk every day, requires its permanent work in the background and is good option in checking the SSD disk for errors and general performance.
DiskCheckup program
In testing an SSD hard drive for speed and performance, we can also be helped by the DiscCheckup utility, which allows you to monitor the S.M.A.R.T attributes of an individual hard drive. As with the programs described above, this application shows statistics of the hard drive, allowing you to track the health status of the latter. The functionality of this product is essentially no different from the programs described above.
HDDScan program
HDDScan is a free utility for diagnosing hard drives (RAID, Flash USB, the SSDs we are interested in are also supported). This program can be a convenient and handy tool in the question “how to check an SSD for errors”; it searches for errors on the hard drive (bad blocks and sectors), supports demonstrating S.M.A.R.T attributes and changing some HDD parameters (AAM, APM, and so on) . This product can be used to regularly “test the health” of your disk and prevent its degradation; you can avoid losing the files you need by creating appropriate backups when necessary.
Increasing the speed of an SSD hard drive 10 times [video]
The answer to the question of how to test an SSD disk for errors and performance will be the use of a number of special diagnostic programs that I described just above. Most of them have fairly simple functionality, allowing you to monitor the status of your SSD drive in real time and, if necessary, perform additional checks. If you are the proud owner of such disks, then use the functionality of one of the described programs to regularly monitor the condition of your device, this will allow you to timely monitor its condition and protect your files from unwanted losses.
Checking an SSD disk using utilities is a universal method that performs several tasks at once.
- First – checking the drive for errors.
- Second – monitoring the operational life of the device.
The presence and periodic use of such programs for the owner of an SSD drive is not only desirable, but also necessary. After all, the resources of these components of modern PCs and laptops are limited compared to HDDs, and the danger of data loss is higher.
Although these disadvantages are fully compensated by a significant number of advantages from using SSDs, due to the difference in their design from standard hard drives.
Features of using SSD drives
SSD drives are solid-state, non-volatile drives whose operating principle is similar to flash memory - SD and microSD cards, USB flash drives and other storage media. Such devices have no moving parts, and use a DDR DRAM chip to transmit data.
Parallel recording of information simultaneously onto several memory elements and the absence of the need to move the heads that read information (typical of HDDs) allows you to increase the speed of the process several times. And, if the average read speed of a modern hard drive is about 60 MB/s, even an average SSD drive can deliver 4-5 times higher performance. When recording data, the excess may be smaller, but the process is still much faster.
Rice. 1. Comparison of read and write speeds of SSD and HDD disks.
Loading speed is of particular importance for those computers on which several resource-intensive applications are installed. In this case, only the Windows system boots up within 15–20 s for a solid-state drive and from 30 to 60 s for a hard drive. The same speed improvement occurs in the process of launching programs and recording data.
Other advantages of using SSD drives include:
- resistance to shocks and falls. A parameter important for laptops hard disks in which they often fail precisely due to mechanical damage;
- compactness - many disks are not much larger than the battery in size mobile phone, others have the dimensions of a memory stick;
- extended temperature range of disk operation;
- minimal energy consumption and no noise during operation.
Rice. 2. Comparison of HDD sizes, standard SSD and mSATA drive.
At the same time, SSD operation is also associated with certain disadvantages. These include the relatively high cost of the drive, although as the capacity increases, the price-to-volume ratio becomes smaller. The second important disadvantage is the limited resource of SSD drives, which is why it is recommended to check them periodically.
Drive diagnostics
the main task SSD disk checks consist of diagnosing its condition and providing information about the presence of errors, resource and expected operational life. This allows the user to know in advance about future problems with the drive, leading to unpredictable loss of information. In addition, based on the results of the check, you can plan the financial costs of purchasing a new SSD drive, the cost of which may not allow you to quickly find such an amount if the problem arose unexpectedly.
In addition, checking the drive does not take much time and does not even require the purchase of expensive software. Utilities can be downloaded online for free or purchased for an amount not exceeding the cost of a standard antivirus program. While it is impossible to recover lost information from SSDs, unlike hard drives.
The best utilities for checking SSD drives
To check the status of the hard drive, drive manufacturers and third-party developers have already released dozens of applications. Most of them are free or shareware, that is, requiring payment only some time after the start of use. Their effectiveness is almost the same, but the differences lie in ease of use and functionality.
SSD Life
The SSD Life utility is one of the simplest software for working with solid state drives. With its help, you can diagnose the disk and display its resource indicators as a percentage.
The application has 3 versions - one portable and two that require installation (free and advanced paid SSD Life Pro). The installed programs are distinguished by their ability to work in background, displaying the drive status in real time. Among the utility's functions, it is worth paying attention to the possibility of automatic diagnostics every 4 hours and saving the results of previous checks.
Rice. 3. SSD Life main window when checking new and old SSD.
CrystalDiskInfo
Another free program for monitoring the status of an SSD checks the read and write speed of the drive, monitors its temperature and resource. In addition, CrystalDiskInfo supports S.M.A.R.T technology to assess the health of disks and, like SSDLife, is available in several versions - portable and installed on a computer.
The second version constantly monitors the operation of the drive, informing the user when bad sectors and other errors are detected. But the portable version does not require installation and can be used both on someone else’s and on a work PC.
Rice. 4. Scan a 64GB SSD using the CrystalDiskInfo application.
DiskCheckup
The process of checking a solid-state drive can also be carried out using a simple DiscCheckup program. Its task is to determine the speed and performance of the drive (and at the same time all that are installed on the computer, including both SSD and HDD). Among the information displayed on the screen you can find:
- number of mistakes;
- disk temperature;
- read and write speed characteristics.
Rice. 5. Checking disks using the DiscCheckup utility.
SSD Ready
When checking the status of your SSD, you can use the SSDReady application, which only works with solid-state drives. The result of the check is an estimate of the expected operating time of the device based on the collected statistics on writing and reading data. The program runs in the background and requires virtually no resources.
Rice. 6. SSDReady application.
Hard Disk Sentinel
A special feature of the Hard Disk Sentinel application, designed to monitor hard drives, is to monitor performance degradation or exceeding permissible level temperatures and a message about this to the user. The application constantly checks the information transfer speed, temperature conditions and other parameters. Among its features:
- work with SSD drives, IDE and SATA drives, and even USB drives;
- displaying information about the current and minimum temperature;
- indication of the number of errors and disk operating hours in hours;
- indication of not only the current, but also the maximum possible information transfer mode for the disk.
Rice. 7. Working with the Hard Disk Sentinel program.
HDDScan
The freely available HDDScan program allows you to diagnose hard drives of any type, check them for errors and monitor the “health” of the drives. The utility works in real time and, if necessary, displays a detailed report on the status of the disk, which can be saved for future use.
Rice. 8. HDDScan program report.
SSD Tweaker
Free app SSD Tweaker is easy to use and allows the user not only to monitor the status of solid-state drives, but also to disable unnecessary operations in the operating system that reduce the service life of the disk. For example, such as the Windows Indexing and Defragmentation Service. Settings can be configured manually or automatically.
Rice. 9. Working window of the SSD Tweaker program.
HD Tune
The HD Tune application is available in several versions - a free version and a paid HD Tune Pro. The first provides testing of the status of hard drives (including SSDs) and memory cards. The shareware utility, for which you will have to pay $38, has expanded functionality, allowing you to control almost all disk parameters and conduct a number of additional tests.
Rice. 10. Diagnostics using HD Tune Pro.
Regardless of the program you choose to diagnose your SSD drive, at least one of them must be installed on your computer (or run from time to time if installation on a working PC is impossible).
At the same time, if too important information is not contained on the drive, the frequency of checking can be changed by setting, for example, diagnostics not every 4 hours, but once a day. Moreover, despite the greater level of reliability of HDDs, using most of the same applications you can periodically monitor their condition, increasing the security of data storage.
Video instructions for checking an SSD drive
Checking the SSD drive: best utilities for diagnostics and performance improvement
Diagnosing the condition of an SSD disk is a necessary thing, because the resource of such media is limited. Although the creators write the approximate date of completion of the models, you can extend the life of the device if you check it regularly.
SSD speed test
There are no moving parts in the solid state design, and the information is transmitted by DDR DRAM. SSD works in a similar way. Data recording is carried out in parallel. There is no need to transfer files for further reading to the reading heads, as is the case with HDDs. SSDs do not have such heads at all, which increases performance.
For comparison: the average speed of modern HDDs with average characteristics is 60 MB/s, solid state drive with all other parameters being equal, during testing the result is 4-5 times higher. It’s the same story with startup: for a HDD this process from zero to full readiness will take 30-60 seconds, while an SSD will handle it twice as fast.
Drive speed indicators are determined by various testing programs (benchmarks), which, as mentioned above, consume SSD resources. In order not to waste the power of the SSD drive, it is better not to abuse such software. But sometimes you need to do this, because how else can you find out if the disk is ok. Below are programs created to check such media for errors, as well as speed tests that do not exhaust disk resources.
Programs for monitoring the status of SSD drives on Windows:
How to test SSDs? Below are six utilities that will help with this.
The software allows knowledgeable users not only to identify the problem, but also to quickly fix it. The option is also suitable for monitoring hard drives.
Basic functionality BY:
- Temperature control and device performance check.
- Automatic power control in emergency situations, as well as creating backup copies of data.
- Review and configuration of S.M.A.R.T. attributes.
- Time schedules.
- Generating reports on the device status.
- Troubleshooting caused by system errors.
- This SSD checking utility also allows you to protect the information on it using a password.
- Hotkey support.
The software has more than enough advantages, but unfortunately, there are also disadvantages. First of all, there are certain difficulties in work. It will not be so easy for complete beginners to understand the program’s capabilities and function management. And the second significant drawback is the consumption of system resources, namely random access memory And central processor, even in standby mode. If there is not enough power in the computer, it will “slow down” during diagnostics.
Another suitable software for diagnosing the condition of solid state drives, which can also be applied to HDDs. The program interacts comfortably with all versions: from XP to “ten”.
3 main features of the program:
- The software is suitable for both personal PCs or laptops and corporate networks.
- The utility analyzes the drive and provides a lot of useful data, including the approximate operating date, as well as supported specific model operating modes.
- Working with Active SMART is convenient because it comes with a very detailed guide. In addition, you can select the Russian language, which makes the interface intuitive.
The program was created to monitor the state of a data warehouse with support for S.M.A.R.T technology. The utility is shareware. The test period for the software is two weeks. Testing SDD for errors is easy with this program: it can report problems in a timely manner. In addition, the developers have introduced a simplified mode for beginners.
What HDI can do:
- show basic disk characteristics;
- check for errors, test performance;
- describe the current state of the drive in text form;
- give recommendations;
- test temperature;
- predict T.E.C. date (Threshold Exceed Condition) - the approximate period of termination of work.
There is also an advanced mode for experienced ones, which makes it possible to learn more about your SSD.
|
Additional features programs/advanced mode |
|
|---|---|
| Technical information | firmware; |
| "geometry"; | |
| buffer volume; | |
| supported data transfer modes. | |
| Information about S.M.A.R.T. attributes in table form | title and description, current state, value and flags. |
| S.M.A.R.T chart | graphical representation of the operation of the T.E.C. prediction algorithm. |
|
Short description interface and basic features |
|
|---|---|
| View | What does it show |
| A panel that displays all disks detected by the software in the system | Through it you can switch between existing devices. The program also shows the characteristics of the media: manufacturer, full model name, volume, total operating time, etc. |
| Two indicators | display the general status of the disk. The program independently evaluates the values of all monitored parameters and issues a conclusion about the condition and temperature of the device. Blue color means the drive is in good condition. Yellow - a warning that one of the parameters is close to critical. Red - poor technical condition. Gray - the program cannot determine the device parameters. |
| The largest part of the main window | shows data about basic parameters, based on which CrystallDiskInfo draws conclusions about the state of the disk. |
Conveniently, there is no need to know the specific values of the parameters. The program performs all actions automatically, after which it gives a corresponding signal with a color indicator.
A tool that will help you find problems with your drive. With its help you can save time and save information. You don't have to pay to download the program. It is suitable for different Windows versions, including XP (SP2), Vista, seven, as well as 2003 (SP2), Server 2008
6 main software skills:
- checks disk status automatically;
- monitors event logs;
- immediately reports the problem;
- reports once a week;
- supports RAID;
- checks using S.M.A.R.T technology. or user script.
Like other utilities, this one has its drawbacks. Thus, the system indicates an error, but does not provide hints on how to solve it. You can easily receive messages from the program by email if you use an SMTP server. But if the user has access to an Exchange server, then setting up notifications will require a lot of tinkering.
Important: Not all software versions are designed for SSDs.
Programs for monitoring the status of SSD drives on Mac:
The utility shows everything that is going on with the disk, in great detail. The tab - the namesake of the installed SSD - will tell you a lot of useful information. In particular, it reflects:
- basic information;
- problem reports;
- health indicator.
Note: To display all indicator icons, you need to go to the appropriate tab.
The statistical section deserves special attention. Having entered it, you can see:
- how many logical sectors the disk wrote and read;
- are there any errors in the interface;
- information regarding forced reboots, etc.
All errors are recorded, which will allow us to determine the cause of the problem and eliminate it in a timely manner. Testing is performed automatically when the system starts. It is available in two modes - fast or long.
The software works efficiently. Easy to use and quite simple, except free version, Unfortunately no.
A worthy product from the developers of the once popular Trim Enabler. The creators did a great job. This is evident in both design and functionality. Now this is not just the software needed to run Trim, but a full-fledged product for monitoring SSDs.
Dashboard shows:
- creator company and disc serial number;
- the volume that the carrier recorded or counted;
- capacity (this concept also includes free and filled volume);
- "thermometer";
- "health" in general.
Everything is laid out comfortably: only facts and nothing superfluous.
In the Visual section- data about the content stored on the drive. They are sorted by sector, which will allow you to immediately track large files.
Health, as is already clear from the title of the section, provides detailed information about the technical condition of the device, allowing the user to assess its condition.
Advice: When buying an SSD, you need to pay attention to the form factor, because not every option will fit into a laptop or be suitable for a desktop PC.
The program can also track the path to a specific file and clear the cache. A free week is given to evaluate the capabilities of Disk Sensei, then you will have to spend money on a license.
Loading...
