It happens that, due to ignorance or carelessness, after an unsuccessful flashing or software change, the phone does not turn on and is blocked. In this condition, a ZTE phone/smartphone model 7 on an operating system with a screen - dpi called "brick".
It’s clear what to do with a brick, but what to do with such a phone? How to revive it and start it? Of course, there is no universal remedy; for each model ZTE a6, a610 plus, z11 s, z17 and other models, there are recovery methods phone.
Errors on the phone, how to turn on the phone ZTE m2, l5, af 3. Restoring from a brick state.
Information on how to restore ZTE l110, z10, black, ZTE 4g, 5, 8 phone after flashing or from a locked state, or when the phone does not turn on, you can read on specialized forums and websites.
Carelessness or error when flashing the firmware of a ZTE phone/smartphone model v7 on an operating system with a screen - dpi.
If you did something unhealthy with your ZTE 8, 20, a910 phone, and after that it stopped loading at all and won’t let you into recovery, FTM or fastboot, then don’t despair. There is one more remedy left:
Restoring dead ZTE phones that won't turn on at home.
- recovery of ZTE phones, after unsuccessful firmware. The description posted on the site uses the so-called Jag method. The essence of the method is that it is necessary to make a special Jag plug by soldering contacts (4 and 5) together through a 301 kOhm resistor. This Jag is inserted into the ZTE a6 - dpi phone with the battery removed. More details on how to restore your phone this way are described here.Restoring a ZTE phone to a working state.
- for phone owners. You can view a list of all supported devices, such as the ZTE a610 plus - dp phone and others, Motorola FAQ on phone recovery is posted at the link above. The site also provides a description of how to restore a phone by closing the contacts when the battery is removed.Before restoring your phone, you need to download and install special program on PC: Random "s Developments Flash & backup. Next you need to: remove the battery, connect pins 4 and 5 (see photo) to each other on the phone connector (see photo), keeping the needles closed, insert the battery, open the needles, insert the cord into the connector and connect to the computer, in Random's Developments Flash&backup program should display a message that the ZTE z11 s - dpi phone is connected.
Restoring a ZTE phone from a brick state.
- this method of restoring ZTE a610c, 4, mf920 phones different models, different manufacturers. When restoring a ZTE v, mf823d, a210 phone, special software is used: a standard flasher from MTS, a programmer from ZTE and a HEX editor. A detailed description with screenshots of the actions is posted on this page of the site (see link).Restoring a ZTE phone using the SEMCtool program.
- these instructions are for restoring some ZTE models. Symptoms of failure: ZTE 610, mf90, t620 phone freezes on “Please wait”, the white display flashes, there is no network signal, there is no connection through the DCU-60, neither through “C” nor through “2+5”. The phone recovery method for the ZTE z17 phone - dpi posted on this site is using a service cable, together with SEMCtool v8.7 software, which can be downloaded for free on the same site.Restoring a ZTE cell phone damaged by water - drowned.
- instructions with pictures on how to restore a ZTE g, ZTE Nubia 32gb 32 GB, 6 phone after it fell into water. In order to prevent corrosion of the phone elements of the ZTE m2 - dpi phone, you need to very quickly remove it from the water and remove the battery. Then the case is removed and the phone is placed in a jar filled with rice for two days. The fact is that rice absorbs moisture very well and is an excellent absorbent. Ordinary homemade rice will draw out all the moisture from the smallest components of the ZTE t320, a330, mf823 phone, and also prevent corrosion. You can use cat litter as an absorbent at home.How to resolve "Operation Error" in Java on ZTE phones.
- instructions for users of ZTE a465, f660, a476 phones if they have problems installing applications or games on their phone. If, when entering the application/game folders, the message “Error during operation” pops up, this means that the Java machine on the ZTE l5 - dpi phone has crashed. This problem can be resolved by simply removing and inserting the memory card into the phone. If this does not help, you will need more complex actions. To restore the functionality of the Java machine, you will need to reflash the firmware FS file and finalize it. More details on how to do this are described in this article.How to turn on your ZTE phone.
To enable touch phone ZTE 510, blade, mf667, you need to do the following:
Press and hold the Power key until the phone vibrates.
- If the phone was turned on, but the screen went dark, press and release the Power key to turn it on.
- an image of a lock will appear on the screen; to unlock the screen, drag the lock icon or click on it.
- when prompted to enter a code, enter the PIN code from your SIM card. In most cases this is 0000 and click OK.
- wait for the phone to start.
Note: The PIN code for the SIM card is located on a plastic card or in the package received when purchasing a SIM card in the salon cellular communication. But be careful, if the PIN code is incorrect three times, you can activate the SIM card only through the PUK code, which is also included in the package received when purchasing the SIM card. If the PUK code is lost, it can only be restored using the passport of a citizen of the Russian Federation for which the SIM card is issued. Therefore, do not enter your PIN incorrectly more than three times. If you have lost your PIN code and there is no way to recover it through your telecom operator, you can do the following.
Cancel the request to enter a PIN code when turning on your ZTE mf 180, l4, a5 phone. To do this, find another SIM card with a PIN code you know (you can assign a PIN code in the settings) and insert it into your phone. Turn on the phone according to the steps described above, when entering the password, enter the PIN code you know from another SIM card. After successfully turning on the phone, go to the phone settings and cancel the PIN code prompt when turning on the ZTE af 3 - dpi phone. Having done this, turn off the phone and change the SIM cards. Now, when you turn on the phone, the system will not require you to enter a PIN code.
This is, of course, elementary advice, but there are solutions to more serious problems.
Advice. The SIM PIN is initially provided by your network operator, but can be changed in the Settings menu. To correct an error when entering your SIM card PIN, tap the “Delete” icon.
ZTE phone won't turn on! Error during phone self-test
The very first thing you need to do is try to reflash your ZTE af 3, a3, x9 phone. But the problem of the phone not turning on can be not only due to “crashed” software, but also due to a breakdown of the phone’s on/off button, breakdown or failure of the battery - charger, etc.
ZTE phone won't turn on. What to do?.
- Very detailed description fix the problem ZTE z7, nubia z9 max, gf3 phone does not turn on, how to turn on the phone. The article is divided into points, with a solution to each problem point by point: checking the power source - the battery, the power button is faulty, the power button circuits, the power controller or its soldering is broken, secondary power sources - power supply to the processor, memory, etc. devices, setup software mobile phone phone ZTE af 3 - dpi.Instructions for restoring the phone ZTE l110 phone on the OS platform on the screen with resolution, type from a non-working state - brick More details on how to restore the device, turn on the touch ZTE v8, 10, 7, v7, a6, a610 plus, z11 s, z17, m2, l5, af 3, l110, z10, black, zxhn h118n, 4g, 5, 8, 20, a910, a610c, 4, mf920, v, mf823d, a210, 610, mf90, t620, n1, g, zte nubia 32gb 32 GB, 6, t320, a330, mf823, a465, f660, a476, 510, blade, mf667, mf 180, l4, a5, s6, l3, v815w, l2 lte, af 3, a3, x9, z7, nubia z9 max , gf3, v5, x5, axon mini, af3, blade q lux, lite, af5, 1920x1080, hn, l370, v2 white, MTS 535, geek pro, leo black, z5s, star, z5 gray, s, v987, t220 , t221 red, x7 lte, x3 gold, m, v790, blade v807, v880g, v880e, v970, v970m, v889m, skate, grand era, r221, mimosa, v8110, a21plus, v71b, e7, v9c 1, light tab 2 , v9s 3g, light tab 3, light tab v9a, v9 light, v98, life and what to do if cellular smartphone does not turn on.
Popular reviews on ZTE
| “I called you, but why didn’t you pick up?” “I didn’t hear the phone ringing. Tell me, where can I download a loud ringer for my phone?” | |
| You can learn more about how to Download ZTE music for free here; to do this, follow the link above. | |
 | Here you can find the latest and most current drivers for mobile phones And ZTE tablets. This link contains the correct, correct programs and latest versions drivers for mobile devices ZTE. |
| If for some reason you have difficulties connecting your ZTE phone to a laptop or PC via wifi, bluetooth, usb, read the following instructions. | |
It is necessary to separate the concepts of “does not load” and “does not turn on”. In the first case, the firmware will not load, i.e. Android itself. In the second case, the phone itself does not turn on and the problem may be either hardware or software.
To determine the cause, you need to understand what was the root cause (impact, moisture, an attempt to update the firmware, installation of applications, etc.). Then, depending on the situation, you can act: restore the system yourself (in case of software errors due to applications) or seek help from professionals at the service center, including replacing damaged components.
Let's figure out why ZTE won't boot or turn on
By the wording “ZTE does not turn on”, users can understand either the complete lack of response of the smartphone to pressing the power button (the screen does not react, the diode does not turn on, there is no vibration shock), or the loading of the smartphone to the logo and then “stop”.
Let's look at the main reasons and try to understand the situation. The cost of repair depends entirely on the phone model and the cause of the breakdown.
An error
A message may pop up on the screen about some error with applications or the Android OS itself.
Here you need to act according to the situation and, depending on what the error is, eliminate it. Error explanations can be found on the manufacturer’s website or by contacting technical support service center.
If an application error constantly appears, then the phone's flash memory is probably damaged. It will have to be changed. This is done only in service centers, because a special tool is required.
An option to solve the problem of errors and the inability to boot ZTE is to reset to factory settings. Depending on the situation: you can do this from within Android itself in Settings, select reset, or through Hard Reset and boot Recovery menu, where to select Wipe Data. But this is for those who understand what they are doing. We are not responsible for your actions.
Battery and charging problems
The phone's lack of response when turned on may indicate problems with the battery. So, the battery could simply fail. This problem is solved by replacing it. The battery may have lost its former capacity. Or is it a manufacturing defect?
It also happens that the battery does not charge at all. The issue may be charger- you need to buy a new one. It is much worse if the power connector or contacts were damaged. In this case, repairs are required.
Mechanical damage
With mechanical damage, a lot could happen to a ZTE smartphone. If there was swipe- any contacts could come loose, even internal hardware parts could be damaged. Therefore, it is better to immediately bring your phone for diagnostics if you see the first symptoms of serious problems.
Screen problems
The screen deserves special attention. Any fall could damage the matrix. As a result, you will have to replace the screen. Only an experienced master can do this.
System problems
Usually when system problems we see either a dark screen, or the phone is simply slow. Such problems can be solved by reinstalling the system and installing latest updates. Specialist in software repair smartphones will quickly cope with this task. And if your phone is frozen, you need to contact us urgently! Perhaps the phone is just glitchy, there is nothing serious about it.
Liquid ingress
As soon as water or other liquid gets under the smartphone case, you need to immediately dry the device. Otherwise it will be destroyed due to rotting and oxidation. The device may need serious restoration. You should not try to charge the device; this will only make the situation worse. Bring your ZTE, the specialists will professionally dry and restore it.
Problems with the Power button
Sometimes the power button breaks. This could happen if dropped, pressed too hard, or used in frosty weather. The problem is solved by replacement.
Solution
If ZTE does not turn on, come to us:
- Diagnostics will be performed directly upon application;
- We will quickly identify the cause of the problem;
- Let's name the cost of repairs;
- Let's get to work.
As a result, you will soon be able to get a fully working ZTE smartphone!
Flashing a phone is always a risky business. It would seem that even if you follow everything strictly according to the instructions, unforeseen situations may arise, and in this case it is very easy to get a brick instead of a working phone. Therefore, there are several simple rules that it is better not to neglect, so as not to tempt fate.
Firstly, the phone should always be charged more than 50%. Secondly, before installing the firmware you must do backup data (Backup). In this case, you can return the phone to the initial state. Having found on a reputable forum instructions for any firmware that pioneers have already successfully flashed, you should not neglect these points, unless, of course, you are a guru in unlocking and flashing devices. But usually, after an unsuccessful attempt, a long correspondence appears in a forum thread with the one who, so to speak, implemented this method. Therefore, the third simple rule can be considered personal attentiveness and strict adherence to instructions.
Even if after flashing your ZTE V880E does not turn on at all, and it has become clear that it is “dead”, this is not a reason to be upset. Below are instructions for restoring a “dead” device.
Recovery instructions for ZTE V880E
- If the phone is still working and the radio module has not been backed up, then be sure to do Backup QPST. How to do this is described. If the ZTE V880E does not turn on and Backup was not done, then the IMEI and MAC address will be changed during recovery. As for Wi-Fi, it should work after the radio is restored.
- Download and unpack into any folders. We also download Russian modified firmware version 2.3.6.
- We take out the battery, simultaneously hold down the volume “+” and “-” and insert the cable, without releasing the volume, press “on”. DFU mode is loading. The phone is detected as ZTE Handset Diagnostic Interface.
- Launch DFU Tools. On the left side, select all the checkboxes, on the right side, indicate the path to the dump. The checkbox on the right side is not selected. Click the left button below. After the process is completed, the smartphone will enter FTM mode on its own. DFU Tools can be closed.
- We reboot the smartphone, now it has Chinese firmware installed.
- In the settings menu, switch to English language(gray letter A).
- Install CWM and, as usual, flash to Russian 2.3.6.
- Using QPST, we restore the previously removed Baskup of the radio module on the Restore tab (where the checkbox is not selected). For those who don’t have it, skip this point.
ZTE phone won't turn on do
After using a ZTE office phone for some time, I encountered some problems, my phone did not turn on and the detector was pressed on its own, I solved these problems and will tell you about it in the article. ZTE is one of the most recognizable phone and telecommunications equipment companies in China. In general, in the international market, phones from this manufacturer have received recognition from many users. Firmware Zte Blade A510 does not turn on after -. But, despite such popularity and the fact that the quality of the devices mobile gadgets in the Celestial Empire they try to improve it every year, the problem of shoddy assembly remains pressing.
This is what a ZTE phone looks like when disassembled. We made sure that ZTE Blade It charges, but still does not turn on, refusing to start. If the phone does not turn on after What to do if the iPhone is too strong. The power connector is being repaired here, because of problems with which the phone refuses to charge and, accordingly, turn on.
Ultimately, about 20% of users who purchased this accessory complain about poor battery performance and problems with charging the phone. Others write about ZTE software bugs. Such failures do not go unnoticed for this accessory and, ultimately, turn it into a so-called “brick” - in other words, into a phone that refuses to work at all. Can I turn it on without the bottom board? zte blade l2 the child broke the socket of the phone charging but does not turn on, please help me what should I do???. Therefore, the article will examine the reasons why the ZTE phone does not turn on, and the main methods for solving this problem will also be discussed.
What are the reasons for a ZTE phone to fail?
All problems, in general, with any computer (electronic computer) can be divided into two categories.
- Hardware - failure of certain devices of the device;
- Software - malfunctions in the accessory software.
This also applies to ZTE. What to do if ZTE Blade A510 does not turn on. In more detail, the main hardware prerequisites for which this model phone stops working, connected:
- With failure of the power connector or power controller. This problem is found in almost all ZTE phones, but it is especially pronounced in the economical models of this phone;
- In addition, the devices of this company have another nasty feature - a high probability of overheating;
- Falling or falling into water can also result in a fatal malfunction of the phone.
Software errors include:
- Critical system failure when updating the firmware version of the phone;
- Viral attack, the result of which is damage system files, responsible for loading and operating the phone.
Not turns on ZTE, ZTE won't charge
A PENNY FOR THE DEVELOPMENT OF THE CHANNEL - This video is after the live broadcast.
ZTE Blade X5 Diagnostics and repairs do not turn on.
Therefore, the main methods for solving the problem will be listed below. turn on the phone ZTE.
Hard-reset is the only one for today software method bring the phone into working condition in this case, if it refuses to turn on at all. We will talk about this method below.
How to fix the problem turn on the phone ZTE
So, there is a subsequent effective method independent decision this question on turning on the ZTE phone. iPhone won't turn on black screen what to do. It is based on the so-called “Hard Reset”, in other words complete removal everyone user data on the phone, also resetting all options on it to industrial settings. This procedure helps fix an unlimited number of software errors, so it’s worth trying this method. zte blade a510. Turned black What should I do if my phone doesn’t turn on? The tablet does not turn on. LG TV does not turn on and the indicator is blinking, what should I do? To implement it on ZTE phone need to:
- Remove the battery for a few seconds, then plug it back in;
This is what one of the ZTE models looks like when disassembled. Here you can see how you can remove the battery from a ZTE phone.
This is the phone's user data control panel. What to do when your iPhone won't turn on? 6s, Plywood Glass and iPhone 6s does not charge. To clear all data and reset device options, click on “Wipe Data/Factory Reset” (to confirm your choice, you must click on the power button)
Confirmation window for clearing user data. Here we must click on “Yes- delete all user data”
The final “Hard Reset” window, which is similar to the start one. What to do if the iPhone does not turn on but the apple is on fire. After completing the procedure of resetting the smartphone to factory settings and deleting all data, select “Reboot system now” to reboot the device.
Even in modern balanced Android smartphones famous manufacturers Sometimes there is a situation that characterizes device software developers from a not very good side. Quite often, even a relatively “fresh” smartphone can cause trouble for its owner in the form of a crash. Android systems, which makes further use of the device impossible. ZTE Blade A510 is a mid-level device that, with good technical specifications Unfortunately, it cannot boast of the stability and reliability of the system software from the manufacturer.
Fortunately, the troubles described above can be eliminated by flashing the device, which today does not pose any particular difficulties even for a novice user. The material below describes how to flash a ZTE Blade A510 smartphone - from simple installation/update official version system until the device receives the latest Android 7.
Before proceeding with the instructions below, please understand the following.
Stitching procedures carry potential danger! Only strict adherence to instructions can determine the smooth operation of software installation processes. At the same time, the Administration of the resource and the author of the article cannot guarantee the functionality of the methods for each specific device! The owner performs all manipulations with the device at his own peril and risk, and bears responsibility for their consequences independently!
Any software installation process is preceded by preparatory procedures. In any case, to be on the safe side, do all of the following before you start overwriting the ZTE Blade A510 memory partitions.
Hardware revisions
The ZTE Blade A510 model is available in two versions, the difference between which lies in the types of display used.
For this version of the smartphone there are no restrictions on the use of software versions; you can install any official OS from ZTE.
In this version of the display, only official firmware versions will function properly RU_B04, RU_B05, BY_B07, BY_B08.
You can find out which display is used in a particular device using the Device Info HW Android application, which is available in the Play Market.
After installing and launching Device Info HW, as well as granting root rights to the application, the display version can be viewed in the line "Display" on the tab "General" main screen of the program.
As you can see, determining the display type of the ZTE Blade A510 and, accordingly, the hardware revision of the device is a simple procedure, but it requires Superuser rights on the device, and obtaining them requires the preliminary installation of a modified recovery, which is done after a series of rather complex manipulations with the software and will described below.
Thus, in some situations you will have to act “blindly”, without knowing for sure what type of display is used in the device. Before the revision of the smartphone is determined, you should use only those firmwares that work with both revisions, that is RU_B04, RU_B05, BY_B07, BY_B08.
Drivers
As is the case with other Android devices, in order to manipulate the ZTE Blade A510 through Windows applications, you will need drivers installed in the system. The smartphone in question does not stand out in this regard with anything special. Install drivers for Mediatek devices by following the instructions from the article:
If you encounter problems or difficulties when installing drivers, use a specially created script to install the system components required for proper pairing of your smartphone and PC.
Backup important data
Every intervention in the software of all Android devices, and the ZTE Blade A510 is no exception, carries a potential danger and in most cases involves cleaning internal memory device from the data it contains, including user information. To avoid the loss of personal information, make a backup copy of important information, and ideally a complete backup of your smartphone’s memory sections, using the tips from the material:
The most important point to pay attention to is backing up the partition "NVRAM". Damage to this area during flashing leads to erasing of the IMEI, which in turn leads to the inoperability of SIM cards.
Recovery "NVRAM" without a backup it is very difficult, therefore, in the description of software installation methods No. 2-3 below in the article, steps are indicated that allow you to create a partition dump before interfering with the device’s memory.
Firmware
Depending on what your goal is, you can use one of several ways to rewrite the ZTE Blade A510 software. Method number 1 is most often used to update the version official firmware, method No. 2 is the most universal and radical method of reinstalling software and restoring the device to a working state, and method No. 3 involves replacing the smartphone’s system software with solutions from third-party developers.
Method 1: Factory recovery
Probably the easiest way to reinstall the firmware on the ZTE Blade A510 is to use the capabilities of the device's factory recovery environment. If the smartphone boots into Android, you don’t even need a PC to follow the instructions below, and if the device is not working correctly, then the steps listed will often help restore functionality.
Additionally. If any errors occur during the installation process or a prompt appears to reboot, as in the photo below, simply repeat the procedure again starting from step 1, after restarting the recovery.
Method 2: SP Flash Tool
The most effective method of flashing MTK devices is to use the proprietary development of Mediatek programmers, which, fortunately, is also available to ordinary users - the SP Flash Tool program. As for the ZTE Blade A510, using the tool you can not only reinstall the firmware completely or change its version, but also restore a device that does not start, hangs on the boot screen, etc.
Among other things, the ability to work with the SP Flash Tool will be needed to install custom recovery and modified OS in the ZTE Blade A510, so it’s definitely worth reading the instructions, and ideally, following them regardless of the purpose of the firmware. The version of the program from the example below can be downloaded from the link:
The model under consideration is very sensitive to flashing procedures and quite often during the manipulation process various failures occur, as well as damage to the partition "NVRAM", therefore, only strict adherence to the instructions below can guarantee the success of the installation!
Before proceeding to the process of installing system software in the ZTE Blade A510, it is recommended that you read the article at the link below, this will help you more fully understand the picture of what is happening and better understand the terms.
The example uses the firmware RU_BLADE_A510V1.0.0B05, as the most universal and fresh solution for models of both the first and second hardware revisions. Download the package with firmware intended for installation via SP FlashTool from the link:
- Launch flash_tool.exe from the directory resulting from unpacking the archive.
- Load into the program MT6735M_Android_scatter.txt- this is a file that is present in the directory with the unpacked firmware. Use the button to add a file "choose", located to the right of the field. By clicking it, determine the location of the file through Explorer and click "Open".
- Now you need to create a dump of the memory area that the partition occupies "NVRAM". Go to the tab "Readback" and press "Add", which will cause a line to appear in the main window field.
- Left-clicking on the added line will open an Explorer window in which you need to specify the path where the dump will be saved, as well as its name - "NVRAM". Next press "Save".
- In the window "Readback block start address", which appears after completing the previous step of the instructions, enter the following values:
- In field "Start Address"- 0x380000 ;
- In field "Length"- value 0x500000 .
And press "OK".
- Press the button "Readback". Turn off your smartphone completely and connect it to the device USB cable.
- The process of reading information from the device’s memory will begin automatically and end very quickly with the appearance of the window "Readback OK".
- This way you will have a backup file of the NVRAM partition of 5MB in size, which will be needed not only for next steps of this instruction, but also in the future if the need arises to restore IMEI.
- Disconnect your phone from the USB port and go to the tab "Download". Uncheck the checkbox next to the item "preloader" and begin the process of recording images into memory by pressing "Download".
- Connect the USB cable to your smartphone. Once the device is identified in the system, the installation of firmware on the device will automatically begin.
- Waiting for the window to appear "Download OK" and disconnect the ZTE Blade A510 from the computer’s USB port.
- Uncheck the checkboxes opposite all sections, and next to "preloader", on the contrary, check the box.
- Go to the tab "Format", move the formatting method switch to position "Manual FormatFlash", and then fill in the fields in the lower area with the following data:
- 0x380000 - in the field "Begin Address";
- 0x500000 – in the field “ Format Length".
- Click "Start", connect the device in the off state to the USB port and wait for the window to appear "Format OK".
- Now you need to record the previously saved dump "NVRAM" in memory of ZTE Blade A510. This is done using the tab "Write memory", available only in the “advanced” operating mode of SP FlashTool. To go to "Advanced Mode" you need to press the combination on the keyboard "Ctrl"+"Alt"+"V". Then go to the menu "Window" and choose "Write memory".
- Field "Begin Address" on the tab "Write memory" fill in by entering 0x380000, and in the field "File Path" add the file "NVRAM", obtained as a result of performing steps No. 3-7 of this instruction. Press the button "Write memory".
- Connect the switched off ZTE Blade A510 to the PC, and then wait for the window to appear "Write Memory OK".
- At this point, the installation of the OS in the ZTE Blade A510 can be considered complete. Disconnect the device from the PC and turn it on by long pressing the key "Nutrition". The first time after manipulations through the Flash Tool, you will have to wait about 10 minutes to load into Android, be patient.
Method 3: Custom firmware
If official ZTE firmware Blade A510 is not satisfied with its functional content and capabilities; if you want to try something new and interesting, then you can use modified solutions. For the model in question, many custom ones have been created and ported, choose any according to your preferences, but keep in mind that developers often upload firmware with non-working hardware components.
The most common “disease” of modified solutions for the ZTE Blade A510 is the inability to use the camera with flash. In addition, you should not forget about the two revisions of the smartphone and carefully read the description of the custom, namely what hardware version of the A510 it is intended for.
Custom firmware for the A510 is distributed in two forms - for installation via the SP Flash Tool and for installation via a modified recovery. In general, if you decide to switch to custom, it is recommended to follow this algorithm. First flash TeamWin Recovery (TWRP), get root rights and find out exactly the hardware revision. Then install the modified OS via FlashTool without a recovery environment. Subsequently change the firmware using custom recovery.
Installing TWRP and obtaining root rights
In order for a custom recovery environment to appear in the ZTE Blade A510, use the method of installing a separate image using SP FlashTool.
The image file of the modified recovery can be downloaded from the link:
Installing custom via SP FlashTool
The procedure for installing custom firmware is generally no different from the similar process when installing an official solution. If you transferred the official firmware files using method No. 2 above (and it is highly recommended to do this before installing a modified solution), then you already have a backup "NVRAM", which means that after installing any modified OS, if necessary, you can restore the partition.
As an example, let's install a custom solution in ZTE Blade A510 Lineage OS 14.1 on Android based 7.1. The disadvantages of the build include the occasional freezing of the Camera application when the flash is turned on. Otherwise, this is an excellent and stable solution, and also the most new Android. The package is suitable for both revisions of the device.
Installing custom via TWRP
Installing modified firmware via TWRP is very easy. The procedure is described in detail in the material at the link below; for the ZTE Blade A510 there are no significant differences in the process.
One of interesting solutions for the device in question is a ported MIUI 8 OS, which is characterized by a nice interface, a lot of options for fine tuning system, stability and access to Xiaomi services.
You can download the package for installation via TWRP from the example below using the link (suitable for both Rev1, so Rev2):
Thus, for the ZTE Blade A510 there are several methods for installing system software, used depending on the desired result. If something goes wrong during the installation of the system in your smartphone, do not worry. If you have a backup, restoring the smartphone to its original state using the SP Flash Tool takes 10-15 minutes.
Loading...
