Many users Apple products set passwords on tablets, phones and computers. It happens that people are looking for a way to unlock their iPhone if they have forgotten the password. In this case, you need to understand that normal recovery will not be possible if the password is lost, but you can bypass all restrictions and return the password or create a new one.

How to unlock iPhone if you forgot your password

There are several ways to achieve what you want:

  • Through synchronization with iTunes program
  • Through the phone detection functionality
  • Via phone firmware

Let's consider each case in more detail.

How to unlock an iPhone via iTunes

Several steps need to be taken:

  1. Connect your phone to your computer.
  2. Install iTunes from the official Apple website. If you have a computer or laptop from a company, then the program is installed by default.
  3. Launch the program.
  4. Let the program sync with your phone. To do this, you need to enter your phone number in DFU mode, that is, recovery mode. To enter the mode, hold down the power button and the home button of the phone for 10 seconds. The company logo will appear on the screen.
  5. In the program, select the “Devices” tab, find your phone and click the “Restore” button.

After the process, you can use your phone again. However, all data from it will be deleted. Therefore, this method is recommended for those who have nothing to lose on their phone.

How to unlock an iPhone through phone detection

To use this method, you need to enable the Find My iPhone function in the settings on your phone. If this function is not enabled, the method will not work.

To unlock, you need:

  1. Go to this site.
  2. Find your iPhone in the list.
  3. Click the “Erase” button.

After the process, all data will be deleted, but you can restore it through the setup assistant.

Unlocking iPhone via firmware

This method is very complicated for the average user, so it is better to entrust the phone to a service specialist than to try to reflash it yourself. One mistake could cause you damage. software telephone, and then you will definitely have to contact service center.

Like regular phone, iPhone can also be locked. But what if you have secured yourself, but your PIN code is lost? What to do and how 4 if you forgot your password?

When a problem occurs

Most often, you need to unlock an iPhone that was imported from abroad, for example from the USA or Europe, and supports one of the local operators. There are several options to make it available to your SIM card. There are both non-standard methods, such as the use of specially developed programs, and completely legal ones. For example, contacting customer service. Let's look at everything in order.

Guide to action

You need to know the GSM operator in order to figure it out; iPhone 4 has a security gap. It allows you to easily access iPhone content. For example, your device is linked to the T-Mobile (USA) operator. First, you need to insert an original AT&T SIM card into your phone. Then dial the service number technical support 611. Drop the call immediately. After turning on Airplane Mode, replace the SIM card with your own. Be sure to check if WI-FI is turned off. Then you need to cancel Airplane Mode, and the phone will search for the network. EDGE is automatically activated, this will be indicated by the appearance of the letter “E” in the upper left corner of the screen. After 20-30 seconds, the phone must be turned off. You will see that this option of how to unlock iPhone 4 if you forgot the password is the most acceptable and simple. After turning on, the phone will again require activation. When one bar signal appears, you need to select cellular communication, remove the SIM card from the device. Again, an activation request will appear on the screen. After this, the SIM must be inserted into the phone. Now it's unlocked.

How to bypass a password

When you turn on the device, the message “Unlock” and the request “Enter the password” appear on the screen. It can be either simple (consist of 4 digits) or complex. In this case, a free line appears on the iPhone display. If you enter the password incorrectly 10 times, information stored on your device may be damaged. First of all, don't panic. In any system you can find a loophole. For example, in electronic devices ah, who are working with the operating system, a bug has been detected that makes it easy to deal with the problem. Moreover, you do not have to have programming skills. You can do without a lost PIN code. Enough after turn on iPhone select on the screen " Emergency call" Then press the power button and hold it until “Power off” appears. Now select “Cancel”, after which you need to dial the phone emergency service, hang up the call and block the device again. You can turn it on using the Home button. This method of unlocking iPhone 4 if you forgot the password is also suitable for electronic devices version 5.1. Finally, when it appears again, you need to hold the power button for 3 seconds, and then click on “Emergency Call”. Thanks to this error, you can bypass iPhone security, send SMS messages, add photos, view

Special programs

The problem of how to unlock the iPhone 4 screen can be solved in another way. Hacker programs are specially created that allow you to hack a phone with almost any modem. The Chinese developer offers the SAM program. It is based on the ICCID vulnerability of the iPhone. When starting this method, you should keep in mind that after such an operation, the iPhone will only be able to work with one SIM card. You can do the following. Restore the device to factory settings and reinstall the operating system via iTunes.

Service to help you!

Not only hacker programs help if you are puzzling over how to unlock a password, iPhone 4 is quite amenable to “opening” in the hands of professionals who work in specialized service centers for repairing electronic devices. Moreover, unlocking will take very little time (about a quarter of an hour). True, professional repairs cost money, but you will be provided with a guarantee and safety of the operations performed. Experts offer a completely legal way to make a phone accessible to anyone mobile operator. To do this, you need to order the “Official unlock” service (unlocking). This procedure is carried out through Apple company. Therefore, if you had a warranty on your iPhone, it remains valid. At the same time, it becomes possible to use WI-FI, play games, and update the device’s firmware to the latest version.

Despite all the simplicity and accessibility of ways to unlock an iPhone 4 if you forgot your password, you must keep in mind that they can be used not only by forgetful owners of mobile electronic devices, but also by scammers. Therefore, you need to be careful when buying a new phone.

Unlocking iPhone 4 becomes popular if the user has forgotten the four-digit password for his device. The most effective way unlocking will be flashed when connected to a computer with pre-installed iTunes application. On this moment This is the only way to solve the problem, but be prepared for the fact that all data stored on the phone will be lost. If your iPhone is locked and you do not have credentials in your Apple ID, then the “Find My iPhone” function must be disabled to be able to reset it. The fact is that it is impossible to activate a smartphone starting from iOS 7 without entering this information.

Flashing to reset password

If your iPhone is locked, there is no other way to restore it. First you need to prepare to flash the phone firmware:
1. Install and enable iTunes, visit the Help menu and check for updates. To be able to work with the phone you will need the most a new version programs;
2. Connect the iPhone using the original cable to the computer;
3. Click on the phone icon in the application, go to the iPhone menu. A menu will appear where you will work.

Even an inexperienced user can unlock 3gs on his own by pressing the “Restore” button. The application will download current version firmware from official sources, and then install it on your device. Then, using the same application, you will be able to restore user data from previously saved backups.

But this method is not without its drawbacks:
1. Latest version operating system takes up a lot of free space (1.5 GB), which is why the process takes quite a long time;
2. If, when trying to unlock 3gs, the Internet connection is lost or Apple servers become unavailable, you will have to do everything all over again.

Installing your own firmware

More advanced users can download the appropriate firmware version and use it during installation. To unlock 3gs using this method you will need to perform similar steps:
1. Download the latest firmware for your phone model;
2. In the open iTunes window, click “Restore”, while holding down the ShIft key on the keyboard if you have Windows OS on your computer or ALT if you are working under Mac OS;


3. Next, unlocking 3gs will not be difficult. An explorer window will appear where you need to find the downloaded firmware file and open it. In the future, the procedure will proceed automatically. You can unlock 3gs after it switches to Recovery Mode. Then it will flash and reboot. All you have to do is specify the interface language, region, connect to iTunes and select the “Like New” iPhone setting.
Next, you will be asked to set a password, but this is not necessary so as not to forget it again. When you start, you will see that in front of you is a “clean” iPhone a1387 with factory settings.

Resetting your password in DFU mode

The described method does not always allow you to avoid errors when resetting your password. Unlocking will be most reliable if you force the phone into DFU mode, which is significantly different from Recovery. The latter rather returns the system to factory settings, erasing user data, while DFU is a bootloader mode in which the device’s memory is erased, and then the system is reinstalled.
The unlocking can be done independently, but if you forgot to backup the data first, it will be irretrievably lost.

The sequence of actions will be as follows:
1. Disconnect your phone, and then use the original cable to connect it to a computer with iTunes installed on it. We transfer it to DFU mode. This is done as follows:
○ Press and hold the power button for 3 seconds;
○ Hold the Home key for 10 seconds without releasing the Power button;
○ Release the Power button and continue to hold the Home button until the device enters DFU mode.
Unlocking begins with selecting the phone in iTunes, and then pressing the “Restore” key while holding down the Shift button. Next, unlocking the phone occurs in the same way as we have already described above. All subsequent actions take place in automatic mode. You may not be able to switch to DFU mode the first time, especially if this is your first experience. If the device goes into Recovery mode, the corresponding image of the media player icon will be displayed on the display. When entering DFU, the screen will be black or white and will not respond to key presses. But iTunes will be able to see the locked device, and it will be indicated that it is in Recovery mode. Ignore it for now, follow the above template.

Apple ID data recovery

Unlocking your iPhone 4 yourself is not that difficult if you remember your Apple ID password. But if the data is forgotten and you have no way to remember it, then even after flashing it using DFU mode, you will not be able to unlock the phone without logging into your profile. In this case, the procedure becomes much more complicated. In addition, when the “Find phone” option is activated, automatic linking to account Apple ID, so reflashing the problem will not solve the problem.
Unlocking should be done strictly using official methods, especially since at the moment there is no real effective methods hacking

There are few official methods, but they are legal and work:
1. Go to the page https://iforgot.apple.com, where you need to enter the attached when registering Mailbox, which serves as an identifier in the Apple ID. Next, press the continue key;
2. When choosing a confirmation method via E-mail linked to your account, you will receive an SMS notification containing a link. By clicking on it you can change your password;
3. If you have lost access to your linked e-mail, then try to answer correctly security questions, which you indicated during the registration procedure.
If none of the methods helped solve the problem, you will have to contact technical support, where they will help you restore access to your personal profile.

To protect user data in iPhone smartphones It is possible to set a password. It will be prompted every time you log in, preventing unauthorized access to sensitive or sensitive data. How to unlock an iPhone if the password has been forgotten? This situation is far from uncommon, so we decided to compile these instructions that will help you reset the security password request.

Blocking methods that don't work

Password protection is highly effective. By setting a sufficiently complex password, you can prevent unauthorized persons from accessing your iPhone. For example, in this way you can protect your smartphone from children who really like to tinker with other people’s gadgets. Also the password will become reliable protection from nosy colleagues poking their noses into other people’s business.

If you store confidential photos or important work data on your device, be sure to use a password - it will protect the contents of your smartphone from access by unauthorized persons.

  • Being complex and chaotic will prevent accidental guessing of the password;
  • The password should not be created based on personal data - specifying your date of birth as a password is complete stupidity;
  • Lack of consistent combinations of letters and numbers - a password like “1234” cannot be called good protection.

Very often, in an effort to meet these requirements, users install such complex passwords, what in certain moment they just fly out of your head. How to lock an iPhone if you forgot your password? Previously, a variety of tools were used to bypass the blocking - logging into the system when dialing, errors in the operating system, outright holes in the security system.

Today, all these methods do not work, as Apple specialists are actively patching holes, preventing the password request from being bypassed. But there are still workarounds, despite active work in this area. Perhaps over time they will stop working, but for now they are quite functional. How to unlock iPhone 5S and any other iPhone models? The following methods are used for this:

  • Unlocking via the Find My iPhone function;
  • Unlock via recovery.

Let's try to look at these methods in more detail.

Current unlocking methods

How to unlock iPhone 4S or any other Apple smartphone? To do this, you need to use the recovery procedure. The essence of any unlocking is to completely delete all data from the smartphone, and then restore it using backup copy. But before you delete data, you need to create a backup copy itself.

This is done as follows:

  • Connect iPhone to computer;
  • Launch iTunes and wait for the connection to be established;
  • If iTunes asks for a password, try connecting to another computer;
  • After the connection is established, we create a backup copy of all important data.

In order to make a backup copy, you need to go to the “Browse” tab and go down to the “Backups” window. Select a storage location for copies (iCloud or computer), click on the “Create a copy now” button and wait for the operation to complete. In the next step, we need to start the iPhone in recovery mode (DFU). How to do it?

First, you need to completely turn off your smartphone by pressing and holding the power key - after a few seconds, a shutdown slider will appear, which you will need to swipe to the right. Now we need to turn on the smartphone in recovery mode. To do this, hold down the power/lock button and the Home button and hold them for 10 seconds. After 10 seconds, release the power key while continuing to hold down “Home”. After another 10 seconds, we release her too. Please note that all this time the smartphone must be connected to a computer with iTunes running on it.

As soon as we release the Home button, iTunes will announce that it has detected a device connected in recovery mode. Click on the restore button and wait for the operation to complete. As soon as the restore operation is completed, the smartphone will turn off and start in normal mode, with the operating system launching. Now it will be the same as it left the manufacturer's factory. In order to return all the data to it, you need to connect the device to your computer, launch iTunes and restore the data from the latest backup. Now your smartphone is completely ready for further use.

When setting up security for logging into the system, set passwords so that you can remember them. If you suffer from forgetfulness, write down your password on a piece of paper and place it in a safe place, such as your smartphone box.

How to unlock your iPhone using Find My iPhone

How to unlock iPhone 6S or any other Apple smartphone? You can try using the “Find iPhone” function; the essence of the procedure is to delete all data remotely. What is needed for this?

  • Log in from your computer or other device to iCloud;
  • Log in with your Apple ID;
  • Go to the “Find iPhone” page and select the device;
  • Select the option “Erase all data”.

After a few seconds, all data on the smartphone will be destroyed. The password prompt will also disappear.

Please note that before wiping remotely, you need to make sure that you have a backup copy of all your data, as it will be destroyed during the wiping process.

Unlocking iPhones through a service center

If you are unable to unlock your smartphone at home, you should contact a service center. How much does it cost to unlock an iPhone using the service? The cost of the procedure varies between 1000-1500 rubles. If you want to save money, contact the official service, taking with you the packaging and cash receipt. Service specialists will try to unlock your iPhone without losing important data.

Hello friends! Not long ago I bought my wife an iPhone 7, but she is a forgetful lady and a problem arose: how to unlock an iPhone if you forgot your password? At that moment I realized what the next topic of my article would be.

Despite the fact that most iPhone models have finger scanners installed, many people continue to use them out of habit. digital passwords. There are also owners of phone models 4 and 4s, which do not have a built-in fingerprint scanner. Plus, there is a possibility of glitches in the scanner. This is why thousands of people are still faced with the problem of a forgotten password.

1. How to unlock iPhone if you forgot your password: 6 ways

After the tenth attempt, your favorite iPhone is blocked forever. The company tries to protect phone owners as much as possible from data hacking, so it is quite difficult to recover the password, but it is possible. In this article we will give as many as six ways to unlock your iPhone if you forgot your password.

Important! If you haven't synced any of your data before attempting the reset, it will all be lost.

1.1. Using iTunes from a previous sync

If the owner has forgotten the password on the iPhone, this method is recommended. Forethought in recovery is very important and if you are lucky enough to have a backup copy of your data, there should be no problems.
For this method you will need a computer on which synchronization with the device was previously carried out.

1. Using a USB cable, connect your phone to your computer and wait until it appears in the list of devices.

3. Now you need to wait, iTunes will synchronize the data for some time. This process may take a few hours, but it's worth it if you need the data.

4. When iTunes reports that synchronization is complete, select "Restore data from backup" iTunes copies" Using backups is the easiest thing you can do if you forgot your iPhone password.

5. The program will display a list of your devices (if there are several of them) and backup copies with their creation date and size. The creation date and size determine how much of the information will remain on the iPhone; changes made since the last backup will also be reset. Therefore, choose the latest backup.

If you are not lucky enough to have a backup of your phone in advance or you do not need the data, read on and choose another method.

1.2. How to unlock an iPhone via iCloud

This method only works if you have the Find My iPhone feature set up and activated. If you are still wondering how to recover your iPhone password, use any of the other five methods.

1. First of all, you need to go to the link https://www.icloud.com/#find from any device, no matter whether it is a smartphone or a computer.
2. If you have not previously logged into the site and saved a password, at this stage you need to enter your Apple ID profile information. If you have forgotten your account password, go to the last section of the article regarding how to reset your iPhone password for Apple ID.
3. At the top of the screen you will see a list of “All devices”. Click on it and select the device you need, if there are several of them.


4. Click “Erase (device name)”, this will erase all the phone data along with its password.

5. Now the phone is available to you. You can restore it from an iTunes or iCloud backup or re-set it up as if you just bought it.

Important! Even if the service is activated, but Wi-Fi access is disabled on the phone or mobile internet, this method will not work.

Without an Internet connection, most methods for hacking an iPhone password will not work.

1.3. By resetting the failed attempt counter

If your gadget is locked after the sixth attempt to enter the password, and you hope to remember the password, try resetting the counter of incorrect attempts.

1. Connect your phone to your computer via a USB cable and turn on iTunes. It is important that Wi-Fi or mobile Internet is turned on on your mobile phone.

2. Wait a little while the program “sees” the phone and select the “Devices” menu item. Then click “Sync with (name of your iPhone).”

3. Immediately after synchronization begins, the counter will reset to zero. You can continue to try to enter the correct password.

Do not forget that the counter cannot be reset simply by rebooting the device.

1.4. Using recovery mode

This method will work even if you have never synced with iTunes or enabled the feature to find your iPhone. When you use it, both the device data and its password will be deleted.

1. Connect your iPhone via USB to any computer and open iTunes.

2. After this, you need to hold down two buttons at the same time: “Sleep mode” and “Home”. Keep them on for a long time, even when the device starts to reboot. You need to wait for the recovery mode window. On iPhone 7 and 7s, hold down two buttons: Sleep and Volume Down. Hold them for the same long time.

3. You will be prompted to restore or update your phone. Select recovery. The device may exit recovery mode if the process takes too long, then repeat all the steps again 3-4 times.

4. Once the recovery is complete, the password will be reset.

1.5. By installing new firmware

This method is reliable and works for the vast majority of users, but requires selecting and downloading firmware, which weighs 1-2 Gigabytes.

Attention! Carefully select the source for downloading the firmware. If there is a virus inside it, it can completely break your iPhone. You will no longer be able to find out how to unlock it. Don't ignore warnings antivirus program and do not download files with the extension .exe

1. Using your computer, find and download the firmware for your iPhone models with extension.IPSW. This extension is the same for all models. For example, almost all official firmware can be .

2. Log into Explorer and move the firmware file to the folder at C:\Documents and Settings\username you are using\Application Data\Apple Computer\iTunes\iPhone Software Updates.

3. Now connect your device to your computer via USB cable and log into iTunes. Go to your phone section (if you have multiple devices). Each model will have a full technical name and you can easily find yours.

4. Press CTRL and "Restore iPhone". You will be able to select the firmware file that you downloaded. Click on it and click “Open”.

5. Now all we have to do is wait. Eventually the password will be reset along with your data.

1.6. Using a special program (only after jailbreak)

If your favorite phone was hacked by you or the previous owner, all the methods above will not work for you. They will lead you to install official firmware. You will have to download a separate program called Semi-Restore for this. It won't work if you don't have the OpenSSH file and the Cydia store on your phone.

Attention! At the moment the program only works on 64-bit systems.

1. Download the program from https://semi-restore.com/ and install it on your computer.

2. Connect the device to the computer via a USB cable, after a while the program will recognize it.

3. Open the program window and click the “SemiRestore” button. You will see the process of clearing devices of data and password in the form green stripe. Wait, the mobile may reboot.

4. When the runner “crawls” to the end, you will be able to use the phone again.

2. How to reset your Apple ID password?

If you don't have a password for your account Apple records ID you will not be able to log into iTunes or iCloud and reset. All methods of how to recover a password on an iPhone will not work for you. Therefore, you will first need to be restored Apple password ID. Most often, the account ID is your email.

1. Go to https://appleid.apple.com/#!&page=signin and click the “Forgot your Apple ID or password?” button.

2. Enter your ID and click on “Continue”.

3. Now you can reset your password in four ways. If you remember the answer to Security Question, select the first method, enter the answer and you will get the opportunity to enter New Password. You may also receive a password reset email to your primary or backup account email. If you have another Apple device, you can recover your password using it. If you have enabled two-step verification, you will also need to enter the password that will be sent to your phone.

4. Once you reset your password using any of these methods, you will need to update it in other Apple services.

Which method worked? Perhaps you know life hacks? Share in the comments!