Sometimes a situation arises when you need to disable autorun of some programs in Windows 7 in order to reduce significant resource consumption and speed up the computer, namely Reduce system boot time when turned on.
The fact is that some programs, after installation, set themselves to autostart when you turn on the computer.
Now we will look at several ways to disable autorun of programs that you do not need.
But be careful, because some programs are necessary for the system to operate and are utility programs. Disabling them may affect some functionality of the operating room. Windows systems 7, her safety.
We remove programs from the startup folder through the start menu
This method may already be familiar to you; if you have been using a computer for a long time, then you could do it without any additional information discover it yourself by accident, but for beginners the information may still be new.
Go to the Start menu > All Programs and find the Startup folder.
Everything that is there starts when the computer is turned on. To prevent these programs from running, simply remove them from there.
We use the standard Windows 7 utility - MSConfig
This utility, MSConfig, is already on your computer by default and you don’t need to install it, you just need to run it and use it.
And it’s very simple to launch it:
Open the Start menu again and type msconfig in the search bar.
It will be found immediately, all you have to do is click on its shortcut to launch it.
If for some reason you don’t have a search bar in the Start menu, you can simply press the Win+R key combination and the following window will open:
Enter msconfig there and click OK.
As a result, the msconfig utility should start. It looks like this:
Go directly to the Startup tab. By unchecking the boxes you will disable unnecessary programs. But if you don’t understand what each of them is responsible for, then it’s better not to disable it.
After you click OK, you will be prompted to restart your computer, but you don't have to.
This utility is very convenient, but it is also not functional enough, because... is not able to provide us with the ability to disable absolutely all (any) programs from startup.
So we'll look at a few more ways.
Manual removal from the Windows 7 registry
Launch the registry editor. To do this, press the usual key combination “Win + R” or again in the search bar in the “Start” menu we type the words “regedit”.
A very scary, incomprehensible window opens with many folders that look more like gobbledygook than names.
But we are not afraid, but calmly understand everything and gain knowledge!
Among these folders, in the distant wilds, there are two autorun sections of the “seven”:
general (local registry), which is used for all users, the address is:
Computer\HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Run
personal register - for current user, at this address:
Computer\HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Run
That is you need to go to the Run folder, expanding the folder tree one by one.
They contain files that run along with Windows and you can easily delete them as usual - by clicking right click mouse and selecting “delete”.
You can first go to the first address, clean it there, and then start on the second.
Disabling autorun of programs using third-party software
Now we'll talk about third party program Autoruns, which is distributed completely free of charge (freeware), but at the same time very powerful and functional - in just a couple of clicks it can disable absolutely everything that can automatically start when you turn on the computer.
Download Autoruns program You can follow the link from the official website: http://download.sysinternals.com/files/Autoruns.zip(521 KB)
At the office The website has an English version, but we can easily understand it, even without knowledge of this foreign language.
The downloaded archive has a .zip extension and can be unpacked with any archiver.
There are 4 files in the folder. We are interested in “autoruns.exe”, which we launch (it is advisable to right-click on the file icon and select “run as administrator”).
When we first start we will be asked to accept license agreement, which we will do by clicking on the “Agree” button.
The program looks like this:
We immediately see the “Everything” tab, which is a list of absolutely all startup objects.
But in order not to get lost there, there are tabs in which all this is broken down separately: Winlog, Drivers, Explorer, etc.
If you uncheck the box, we will disable autorun. If you click on a line, below you can see a description of the object: the version of the program, where it is located on the computer, size, etc.
In the “Logon” tab there is a list of programs that we could disable using the previous methods described in the article.
You may notice that some lines are highlighted in pink - these are simply objects that do not have detailed description, A yellow those whose files have been deleted and can no longer be loaded are marked, but are simply listed. Those. they may not be deleted.
Again, be careful when disabling something you know nothing about. Perhaps this is necessary for the main Windows operation 7 and after disabling these services, the computer will not work as it should.
For the laziest we provide video tutorial of the whole process:
Hello! Friends, do you know what I do on almost every computer that comes into my possession? That's right, I'm cleaning the list of startup programs. When I turn on someone else's computer, about 80% of the time I want to cry :). I simply cannot observe the process when, along with turning on the computer, another 20 programs are launched, and the computer seems to have already turned on, but you need to wait a few more minutes until you can open the folder, etc.
As you already understand, I will write about how to remove programs from startup, and thereby speed up the computer boot many times. In the article, I also wrote about startup programs, and how to clear the startup list. But there I wrote how to do it using Total programs Commander, also with additional utilities, and such Total version I'm probably the only one who has Commander :), it's already old.
I remember I was still uneducated in computer science, and my computer broke down, Windows crashed, I don’t remember exactly. And I took mine system unit for repairs to a friend. He did everything for me, for only 20 UAH. and then installed this Total Commander(by the way, I installed it on autorun, I suffered for a long time until I removed it from there :)) and since then I have been using it, although I only use it to clean the system, it has good utility. Okay, enough memories :), on to the point.
So in this article I will write about how to remove programs from startup using a standard utility in Windows. There are many programs for this matter, but I understand that you don’t always want to download and install some additional programs, then also understand them. Moreover, if it is possible to do everything as a built-in tool.
Why clear the list of programs in startup?
Let's first figure out where they come from. It's very simple, you install different programs, some you install yourself, and some are installed without your help. Some programs are added to the startup list, and when you turn on the computer, they start themselves. Sometimes it is convenient, and even necessary. It’s good when, for example, Skype, antivirus, etc. start automatically.
There are programs that run automatically, but you don’t need them at all, or you need them very rarely. For example the same DAEMON Tools Lite is a great program, but for example I need it once a month, and I can run it myself. But here it starts all the time when you turn on the computer. Okay, as long as it starts up, it also works all the time and eats RAM. What if there are ten or more such useless programs? This all greatly affects the speed at which the computer turns on and its operation.
I think you already understand where programs in startup come from and why they start themselves when you turn on the computer. In short, autorun is a list of programs that should start when you turn on the computer.
Why they need to be removed from there, I think you already understand. All this is done in order to increase the boot speed of the computer and increase the speed of its operation. After all, all these programs that are always running, of course, slow down the computer, and sometimes they also secretly use the Internet connection, I wrote about this case in the article.
So, let’s clean the startup list and your computer will start breathing in a new way! Of course, I have disabled unnecessary programs from startup, but I still check them from time to time. It happens that garbage appears on this list again.
How to remove programs that start when you turn on your computer?
As I promised, we will use the standard tool.
On Windows 7:"Start" "All programs", “Standard”, look for and run the “Run” utility.
On Windows XP:“Start”, “Run”.
In the window that appears, enter the command msconfig and click “Ok”.
A window will open in which we go to the tab. We look at the list and remove all programs that you do not need to autoload.
Be careful!
Do not uncheck programs that you do not know. If you want, you can type the name of the program from the list in a search, for example in Google, and see what kind of program it is. After checking, you can decide whether to disable it or not.
As you can see, my startup list is very modest. After you remove everything unnecessary (uncheck the boxes), click “Apply” and “OK”.
It happens that unnecessary programs may still be among the services. Therefore, in the window that we opened above, go to the “Services” tab. Immediately check the box next to “Do not display Microsoft services”. And uncheck unnecessary services. To save the result, click “Apply” and “Ok”.
A message will appear, you can exit without rebooting, or restart your computer.
If you have disabled a decent number of programs and services, then after a reboot you will see how much faster your computer will turn on and work. I hope that my advice will be useful to you and that you will use it, since it has a very good effect. Good luck!
Also on the site:
How to remove programs from startup (autorun)? Speed up your computer boot updated: February 7, 2018 by: admin
Many owners of computer equipment have repeatedly wondered why it loaded quickly enough upon purchase, and after a short period, loading Windows became longer. Experienced PC owners know that when installing new software products, the availability of which is seen as an urgent need, execution files are simultaneously included in the startup registry. As a result, these applications begin to automatically launch in background along with Windows. Of course, due to this, additional information increases, and therefore its loading time also increases.
Considering that most often the user does not need all these daily installed applications, a completely reasonable question arises: how to remove the program from startup.
A large list of startup programs can affect performance operating system.
Before you start learning about how to disable startup Windows programs, it is important to understand why this is all being done.
Why remove programs from startup?
If only a small part of the installed applications starts at the same time as the operating system, this is unlikely to cause irritation to the PC owner; in some cases their autoloading will remain completely invisible to him.
If the number of such programs increases, then the boot time of Windows increases proportionally with them. And this already causes negativity on the part of the PC owner. Unfortunately, many software product developers even without urgent need include the autoload function in it. As a result, after installation it starts up along with the OS.
Now it’s quite easy to figure out how to disable startup programs. The green checkmark next to unnecessary applications is removed. Once all actions are completed, the system will prompt you to reboot. It is best to do this right away, then the result of all actions will be immediately obvious. But you can refuse an immediate reboot, then the changes will take effect after the scheduled system reboot.
Removal using programs
It is also useful to know an alternative way to remove a program from startup. It is carried out thanks to special software products that can be downloaded from various resources, installed and immediately begin implementing your plans.
One such software product that allows you to easily disable everything unnecessary from automatic download, is CCleaner. It is good because it is compact, easy to use and highly efficient.
After launching CCleaner, the user should go to the Startup tab, where it will also be presented full list software products that are loaded with the operating system.
The user, wanting to delete a specific application, must click on it, the line will turn blue. Now all that remains is to press two buttons in sequence: “Turn off” and “Ok”. Having performed such simple manipulations, the user will undoubtedly be able to disable unnecessary applications.
There is another successful program called Autoruns that acts as an effective assistant if you need to remove something from an automatic download. Despite the fact that Autoruns is not Russified, the interface is quite clear, so it does not raise questions even for beginners. To delete software from automatic download, just uncheck the box next to it.
Qualified specialists, as well as those who have sufficient practical skills, prevent the installation of programs with activated function automatic start, turning it off either at the installation stage, or immediately after installation, going into the settings of the installed software application.
Removing unnecessary applications from automatic loading is a necessary measure, since with a significant number of them it is impossible to talk about the successful operation of the operating system.
As you install new programs, your computer may slow down. One of the reasons is a large number of utilities in the startup list that take up device resources. Today we’ll look at what autoloading is, as well as how to optimize it so that resources are not wasted.
Autoload: what is this option and how is it useful?
The option to autorun programs implies opening utilities for further work in them immediately after turning on the computer, in particular, Windows OS. There is a list of startup programs. The user has the right to edit it himself: add and remove unnecessary utilities. Auto mode turning on applications will save you from searching for shortcuts on the “Desktop” in order to launch programs: you have turned on your computer device and can immediately work in the desired utility.
In the Startup tab, you can edit the list of programs that should open when Windows starts
It is important to know that a considerable number of startup utilities negatively affect the performance of the operating system: utilities included in the list continue to function in the background after autostart and load CPU. As a result, the device works slowly, especially if it has poor technical specifications.
Thus, it is not recommended to include many utilities in the list: no more than 7. Only antivirus will be a mandatory item. All other programs you choose yourself. For example, if you work constantly on the Internet, put your favorite browser in autoload.
How to disable autorun utilities in Windows 10 or remove unnecessary software from there
Autoloading is a useful option, but sometimes, as we noted above, users also encounter its disadvantages. Problems in this case may arise through no human fault: often during installation, utilities are automatically included in the startup list without the user’s knowledge, even if there is no need for this. As a result, even new computer starts to freeze.
What to do in such a situation? You won't be able to turn off autoloading completely. In this case, only unnecessary programs are removed using any of the methods below, so that the list becomes much smaller.
Via "Task Manager"
In the Task Manager, you can not only end program processes, but also configure your startup list. What exactly needs to be done in this window?
- In Windows 10, “Task Manager” can be quickly launched through the “Taskbar” (the bottom bar on the computer screen where icons are located). open source software and the "Start" button). Right-click on an icon-free field on the “Taskbar” and context menu make a choice in favor of “Task Manager”.
Select "Task Manager" from the "Taskbar" context menu - You can open this window in the classic way: hold down the key combination Ctrl + Shift + Delete and select “Task Manager” in the new screen.
- The manager window will have several tabs. As you may have guessed, we need the “Startup” section.
In Task Manager, switch to the Startup tab - Click on the column at the top “Status” to organize the list with utilities - it will be convenient to work with it.
Click on the “Status” option to sort the list - Look at the apps that are included in startup. Find the ones you don't need. Select them one by one with the left mouse button, and then click on the “Disable” button located at the bottom of the window. If you want to deactivate all applications in this list, repeat the procedure for all items except the antivirus, as it should start working immediately after Windows startup.
Select the program in the list with the left mouse button and click on the “Disable” button - Close Task Manager and restart your device.
Video: how to remove programs from the startup list using Task Manager
Using Registry Editor
You can set up a list of startup utilities not only through the familiar “Task Manager”, but also through a window called “Registry Editor”. Even beginners who previously did not know about the existence of this important built-in service can cope with this procedure. Let's look at everything step by step.
- To make the “Registry Editor” window appear on the screen of your device, hold down two keys at the same time: Win (the button with Windows icon) and R.
- A small “Run” window will open. It will contain one line “Open”. Enter the regedit command here. Now click on OK or press Enter on the keyboard.
Enter the command regedit in the "Open" field - Click on the left button “Yes” to allow the “Registry Editor” to make changes on this computer.
Click "Yes" to allow Registry Editor to make changes to your device - The editor window is divided into two parts. We will look for the file folder we need in the left area, where the tree structure is located.
The Registry Editor window is divided into two parts: sections and a list of files in folders - First, open the following sections one by one: HKEY_CURRENT_USER - Software - Microsoft - Windows - CurrentVersion - Run.
- As a result, you will see a list of files that are responsible for the autostart of individual applications on the device. As a rule, the name of these files contains the name of the utility, so it will be easy to determine which items need to be deleted.
Find the names in the list of registry entries in the Run folder unnecessary programs that should not run on Windows - To remove an application from the list, for example, ViStart or CCleaner, right-click on it to bring up a small menu with options. In it we already select “Delete”.
Click on "Delete" to remove the registry entry - Click on “Yes” to confirm deleting the file from the registry. Don't worry: this will not lead to a system failure. You simply disable the utility from running.
Confirm deleting the registry entry by clicking on “Yes”
Using the Startup folder on the system drive
The folder containing the list of startup programs is located on system disk. To avoid searching for it in Windows Explorer for a long time, we suggest using in a fast way, which will help you immediately display the desired section on the screen. So what to do:
- On your keyboard, press and hold two keys for a couple of seconds: Win and R. The familiar “Run” window, with which we launched the “Registry Editor,” will open.
- In the “Open” field we write the following: shell:startup. To avoid making a mistake in a command, it is better to copy it and then paste it into a line using the right-click context menu.
Enter shell:startup in the Open field to launch the Startup folder. - As a result, " Windows Explorer", specifically the Startup folder.
The Startup folder will contain a list of programs that start working when Windows starts - To remove unnecessary application from the list, right-click on it to display a list of options. In it we already click on the “Delete” item, which is located towards the end.
Select “Delete” in the context menu that appears to remove the program shortcut from the Startup folder
This method has a big disadvantage: not all applications that are in Autorun mode are displayed in this folder. Thus, you will not be able to fully edit the list of utilities.
Uninstall using Task Scheduler
Optimize the list of startup utilities along with loading Windows You can use another built-in service of the operating system: “Task Scheduler”. How to open it and what needs to be done in its window?
- Open the "Search" section on the "Taskbar". It will have a magnifying glass icon to the right of the Start button.
Click on the magnifying glass icon to open Windows Search - If there is no such icon, enable it: right-click on the “Taskbar” and select “Search” in the context menu, and then select “Show search icon”.
Select "Show search icon" - Enter the query “Task Scheduler” in the line. It will appear in the results immediately. Open it with the left mouse button.
Enter the search term “Task Scheduler” in the line - In the service window, open “Task Scheduler Library”.
- There will be a list in the middle part of the window. Find the unnecessary program in it. Left-click on it to highlight it, and then click on “Delete” or “Disable” in the right third part of the screen. Be careful, as here you can disable important processes from running.
In the list of programs scheduled to run with Windows, disable unnecessary items
Installing special programs
You can clear the startup list not only using the built-in Windows tools, but also with the help of special software. Today we’ll look at two simple and effective utilities as examples: CCleaner and Autorun Organizer.
CCleaner: quickly and easily remove programs from startup
The CCleaner utility is a universal assistant for optimizing Windows performance from the developer Piriform. Its main function is cleansing hard drives from “junk” files that accumulate over time and begin to slow down the operation of the device. With this tool you can easily and simply edit the list of startup programs. Use the following instructions to remove unnecessary utilities from the list:
- Download the utility from the official website. Install the program following the simple prompts of the installation wizard.
Click on the Download Free Version button to download the CCleaner installer - Launch the application using the shortcut on the Desktop.
- Go to the "Tools" section, and then to the "Startup" tab. A list will appear in the Windows block with programs that open when the device starts.
In the Startup tab there is a list of programs that start with Windows - Select the unnecessary utility in the list with the left mouse button. Then click on the blue “Turn Off” or “Delete” button. Repeat this step for each application you want to remove.
Left-click on the unnecessary program and select “Turn off” or “Uninstall” on the right side of the screen
Video: how to disable startup programs using CCleaner
Autorun Organizer: an easy-to-use startup manager
Unlike CCleaner, this tool, developed by ChemTable Software, is only designed to manage the startup list. This is its main function: it does not clean disks. Nevertheless, the utility copes with its tasks efficiently: even if the program re-includes itself in the autorun list, Autorun will immediately disable it.
The downside of the utility is that during installation it is suggested to install additional software: Yandex.Browser and other related products from this company. However, you can refuse to install these programs by simply unchecking the boxes.
Now let's look at where you can download this startup manager from, as well as how to work in its window.
In the program itself
Often, utilities themselves include themselves back in the autorun list some time after you have removed them using any of the above methods (with the exception of Autorun Organizer, since the program strictly monitors this). To prevent them from being included in the list again, turn off the autoload option in the utility itself along with the OS. Typically, every program has a “Run automatically with Windows” option.
Let's look at the procedure using the example of one of the popular download managers and media players in one tool called MediaGet.
- Open MediaGet from the shortcut on your Desktop or Start menu.
- In the upper right corner, look for a small gear icon.
Find the gear icon in the top right corner - Click on it to open the menu. Now click on “Settings” to open the settings section.
Left-click on “Settings” - You will immediately be taken to the Main tab.
- In this tab, in the “System” block, find the “Start with Windows” item.
Find "Start with Windows" - Uncheck it to prevent the program from running in the background immediately after Windows starts.
Uncheck "Start with Windows" - Left-click on the green OK button for the changes to take effect.
You can go into the settings of each program individually and turn off the option to run with Windows to completely remove them from the list.
If there are a lot of utilities you don’t need at startup along with Windows, you need to clean up the list: remove all programs that you don’t use, as they take up precious system resources on your computer. This can be done using standard means Windows, and due to special utilities, for example, CCleaner and Autorun Organizer. If you notice that a program is being re-added to the list, disable the “Run with Windows” option directly in its settings.
Autorun is a very useful thing, especially when it comes to applications that must be open all the time. For example, Skype or antivirus. But often there are unnecessary programs sitting there: they only interfere with work and load the system.
For example, the uTorrent torrent client. Of course, if you are constantly downloading something, then this may be a good idea, but in most cases it is not needed. So why load the system once again and waste Internet traffic?!
There are several ways to disable autorun. I will tell you about each of them, because it is often not so easy to uproot a program. Let's start with the simplest.
Method No. 1
Disabling autorun in the program itself
Often autoloading can be disabled directly in the application itself. To do this, open the program, go to its settings and uncheck the box in the desired place. I’ll show you using uTorrent as an example.
1 . In the upper right part of the window, click the “Settings” button and select “Program Settings” from the list.
2. In the window that opens (in the “General” section), uncheck the box next to “Run uTorrent with Windows” and “Run minimized”, click “Apply” and OK.
As you can see, everything is very simple. But, unfortunately, it does not always work. In some applications, this setting may be deeply hidden or absent altogether.
Method No. 2
Cleaning the Startup folder
In general, in Windows, in any version (XP, 7, 8, 10) there is a special folder where there are shortcuts to programs that are loaded along with the system. It is located in Start, in “All Programs” and is called “Startup”.
If you find a hated application in it, delete it without hesitation. This is done as usual: right-click - Delete.
If you don't have this folder, open it through search. To do this, in Start, type shell:startup in the search bar and open the found folder. Remove unnecessary applications and after that, open and clean the shell:common startup folder in the same way
In theory, of course, this is true, but in practice there are only part of the programs that are in autorun. And it’s not a fact that among them you will find the one you want to get rid of.
Method No. 3
Editing the system configuration
One of the most reliable ways to remove a program from startup. It almost always works.
1 . Open Start, enter msconfig in the search window and select the found file.
Uncheck unnecessary programs, then click “Apply” and OK.
In addition to regular software, this list also includes utilities, disabling the loading of which is highly not recommended. Therefore, you should only remove the birds if you are absolutely sure that this is the “same” (unnecessary) program.
Usually after this a small window appears where Windows prompts you to restart the system. This is not necessary. In any case, the next time you turn on the computer, the changes will take effect.
Method No. 4
Removing startups in CCleaner
CCleaner is a program that helps the average user clean the system of all junk (remove junk, clean the registry, and much more). You can also configure autorun through it.
Often this application is already installed on the computer and is located in the Start - All Programs - CCleaner folder. But if it is not there, and you would like to keep the system clean and tidy, then you can download and install this utility for free from here.
1 . We launch the program, select the “Tools” item, go to “Startup”. The Windows tab should be open here.
Programs that are in autorun mode will be highlighted more rich color and opposite them in the “Enabled” column will be written Yes or Yes.
2. Click on the program that you want to remove from startup, and click on the “Disable” button at the top right.
3. Restart your computer for the changes to take effect.
Method No. 5
Disable autorun through the registry
The registry is the place where all the Windows system settings are located. You need to work in it carefully, because if you do something “wrong,” you can make your life much more difficult.
Particularly talented ones, for example, manage to completely shut down the system, after which the computer simply refuses to work. So if you are not confident in yourself, it is better not to take risks: use the methods that I wrote about above.
1 . Open the registry editor. You can do this by searching in Start by typing the word regedit there
2. Open the folders in the following sequence (on the left side): HKEY_CURRENT_USER - Software - Microsoft - Windows - CurrentVersion - Run
3. C right side There will be commands that launch certain programs. This is where they need to be removed.
And check the adjacent RunOnce folder. The full path to it is: HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\RunOnce. There may also be commands here that launch all sorts of applications. We remove them in the same way.
You can also check and, if necessary, clean these two folders:
- HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Run
- HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\RunOnce
Which programs to remove from startup, and which ones are better to leave?
For maximum fast loading and work Windows autorun It is desirable to free as much as possible from unnecessary things. However, you should not be zealous, because this can lead to serious problems, especially if you touch service applications.
Programs such as iTunes, uTorrent, Mail.ru, Yandex can be safely removed. Usually they are specifically added to startup right during installation and do nothing useful.
But everything that has words like Intel, Nvidia, Microsoft is better leave. And, of course, do not touch the antivirus - it must work constantly from the moment you turn on the computer until it turns off.
The situation with messengers is ambiguous. System loading speed certainly suffers, but manual start requires additional time. And sometimes you can completely forget to launch some Skype and end up missing an important call or message. So decide for yourself.
In general, if in doubt, you can type the name of the program into the Yandex or Google search engine and find out what it does. Most likely, it will also be written there whether it can be removed from autorun without consequences or not.
Loading...
