Why is it impossible to reconfigure the Kinetic 3 router. Zyxel keenetic lite III: setting up a network with step-by-step instructions. Way. Semi-automatic firmware update

Keenetic Lite 3 is one of the updated line of routers from Zyxel. All of its products received a hardware update, as well as a new firmware version. That is why the setup of this router is somewhat different from its predecessors. Next we will go into more detail at each stage of this process.

Kit and appearance

Owners of earlier models will immediately identify a number of external differences that Keenetic Lite has received. This is still the same black and compact router, but its antennas are now located not at the back of the device, but on the sides, which makes it easier to mount on the wall.

The bottom is made glossy, side panels matte, and on top there is a signature wave-like pattern. The rear panel now houses a hardware mode switch. The operation indicators are located on the front of the router and glow green when active. They don't blink as often, so they don't attract attention.

The router kit includes:

• the device itself;
• power unit;
• network patch cord;
• detailed instructions;
• warranty card;
• advertising brochure with other company products.

Connecting a router

Let's start connecting:

The router is ready for further work. If you want, you can clarify what they are and what types they are, as well as what equipment they are used to connect.

Entrance

Let's move on to the basic setup of the Zyxel Keenetic Lite 3 router.

First, let's go to its interface With:

The router menu opens before us, which is necessary for its further configuration.

Internet protocol settings

After entering the configurator, you can use the “Wizard quick setup", which allows you to automatically obtain the simplest network settings. Next, we will look at the process of connecting to the network for each type of connection.

L2TP

This type of protocol is used provider Beeline. To establish a connection with such a network, we will need to create 2 connections using a dynamic IP address and an L2TP tunnel.

Let's create the first one:

Attention! If you plan to use the IPTV function, then also check the corresponding port in this menu.

• check the checkboxes next to two more items – “Enable interface” and “Use to access the Internet”;
• in the “Configure IP parameters” field, set it to “Automatic”;

Important! The previous paragraph is required. If you leave “No IP address” in it, then even with all the other correct settings the connection will not work.

click “Apply”.

After this procedure, you can start creating an L2TP connection:

Now you can connect the provider cable to the router (if you have not done this before) and check whether you have access to the Internet.

PPPoE

If you use the services of providers Rostelecom, Dom.ru and TTK, then we need to set up a PPPoE connection.

Attention! Some of the branches of the above providers instead PPPoE connections can use a different type - using a dynamic IP address. You can check this information with the service technical support.

Let's start establishing a connection:

1. go to the “PPPoE/VPN” section;
2. click “Add connection”;
3. activate the checkbox next to “Enable”;
4. in the description field, set the name for the connection (can be anything, in Latin letters);
5. indicate the protocol type “PPPoE”;
6. in “Connect via” we indicate the previously configured “Broadband...”;
7. set a name for the service, or leave this field empty;
8. indicate the login and password for the connection;
9. “Authentication method” select “Auto”;
10. click “Apply”;
11. connect the provider's cable to the WAN port and check the connection to the network.

Video: setting up the ZyXEL Keenetic Lite III router

DHCP

For of this type connection using automatic IP acquisition, we will need to do the following:

• open the “Internet” tab and select “Connection”;
• in the item “Configuring IP parameters” set “Automatic”;
• click “Apply”.

Setting up 3G Internet

To set up a 3G connection, follow these recommendations:

Note! For each specific operator, the settings in point 7 will be different. You can check them with the provider's technical support service.

WiFi

To establish a Wi-Fi connection:

Attention! Once the connection is established, the router will automatically connect to the Internet without requiring you to click on the shortcut each time.

IPTV

Let's start connecting the IPTV function:

Important! This step may vary for some providers. If the operator does not support automatic IP acquisition, then select “Without IP address”. This information You can check with your service provider.

• check “Enable” and “Use connector” opposite the 4th port, which will be used to connect the set-top box;
• save the changes.

Software Update

Like any other program, software for Keenetic Lite 3 needs timely updating. You can do this as follows:

Attention! The update will take a few minutes. At this time, do not turn off the router to avoid further errors in its operation.

When the router is updated and restarted, re-enter the login information and see in the software version line installed update. After this, it is recommended to change the standard password and login. This can be done in the “System” and “Users” tabs by double-clicking on the required data and changing them.

Zyxel Keenetic Lite 3– a reliable and easy-to-use router. Its setup is almost the same as previous versions. If this is your first time encountering this procedure, just follow our simple instructions or ask questions in the comments to the article.

Users do not even suspect that the reason for the poor Wi-Fi signal and the network in general is their home routers that do not meet the standards. This applies to outdated or low-quality routers. A cheap Chinese device is a reckless choice. To work productively and securely, you need appropriate, e.g. Zyxel router keenetic lite 3 – high-quality, reliable and inexpensive. However, buying and connecting is half the battle; you still need to activate it, and the setup instructions sometimes don’t take into account important points process.

"Kinetic Light 3" – this is the latest of the modern developments of the Swiss company, which has high functional characteristics and opportunities. The model is distinguished by its high-speed qualities and a number of advantages that are often unavailable for more expensive devices of this type. This is especially true for connecting everyone possible devices to the network and IP television. The new product has undergone several hardware updates, in particular, a revision of the MT7620N chip presented by MediaTek, with a frequency of 580 MHz. Data transfer reaches 300 Mbit/s.

The important features of connecting to two or three providers at the same time have been preserved. Thanks to this, Keenetic lite uses a backup channel when possible failures in the main network by controlling access priority. The same applies to filters to protect against viruses, unauthorized entry into the database, including the “ Parental control", when connecting this option on the Yandex.DNS service.

The new “Adapter Mode” function allows computers with ports without any accompanying devices to connect to a Wi-Fi network. There is also the possibility to get remote access using a VPN server and other useful options.

Main characteristics of the new Zixel:

• The standards of the networks used are 802.11b/g/n.
• Wi-Fi frequency range is 2.4 GHz.
• Basic transfer speed is 100 Mbit/s.
• The maximum possible transmission speed is 300 Mbit/s.
• The antenna gain is 3 dBi.
• Connection security – WEP, WPA, WPA2.
• Dynamic routing protocols – IGMP v2, IGMP v1, IGMP proxy, IGMP snooping.
• Equipped with five 100 Mbit ports.

Appearance

The Zixel router is black and made of plastic. It has small compact dimensions: 16.6 cm wide, 11.6 cm long, 3.4 cm high, the weight of Zyxel keenetic lite III is 200 grams. It is equipped with a convenient and intuitive Web interface that is easy to understand. This largely universal router differs from its predecessors by moving improved antennas to the side panels, which made it possible to increase the radius of signal reception and transmission. A switch appeared on the rear panel to control operating modes. Indicators that glow green during the active phase blink infrequently so as not to involuntarily distract the attention of users.

Where to install

It is better to place the keenetic lite in free space so that there are no walls in the signal path to the computer. Depending on the building material, the radius of the network can be reduced to 30 m.

It is necessary to raise the device as high as possible, away from household appliances in the house. This is the main condition observed during installation.

TVs, refrigerators, microwaves, Cell phones and other familiar household devices operate at the same frequency as routers. They negatively affect their performance, reduce the reception speed or jam the home network signal. By transferring the antennas to the keenetic lite III, the router is mounted on the wall. It is necessary to install the router away from:

1. Soundproofed walls.
2. Flat metal structures.
3. Windows and mirrors.
4. Aquariums and other open water surfaces.

Connection and preparation for work

Connecting the keenetic lite-3 router occurs as follows: the device is unpacked, then you need to make sure that all the elements included in the kit are in place. The first thing to do is to install the antennas in the corresponding connectors on its side panels and set the mode as “Main” with the switch button.

Using the Zixel power adapter, keenetic lite is connected to the electrical network, from the outlet - the power plug is inserted into the slot on the back surface. The Internet cable is connected to the WAN interface of the router, which is also located on the reverse side. Using a patch cord—the shortest cord included—one of the device’s LAN ports is connected. They are both the same color, with a connector network card computer. After this, you need to turn on the power button, the beacons will light up, the connection to the router is complete, all that remains is to configure it.

Settings

Settings home router Zyxel keenetic lite III and Internet connection are carried out in two ways, in two modes: manual and automatic. When choosing the first option, the web configurator is used, the second option is the device interface. This is the so-called quick setup. But in both cases, you need to understand the intricacies of the process, strictly adhering to the sequence of actions.

Automatic setup

For self-settings The zyxel keenetic lite III router has instructions for its operation, which must be included with the device. To start the settings automatically, you need to go to the router interface. Using a computer or laptop, open home page usual browser. Then everything is simple:

• In the search engine, enter the IP address of the router, indicated on the tag below: 192.168.1.1, entered via http://

• Next, the router will ask you to enter data to access the system; the default login and password are used here: admin and 1234; after standard configuration, it is better to change them to your own.
• A welcome page will open notifying you that the Internet centers are not configured. Here you need to click on the “Quick setup” button and go through a simple registration.
• After completing the standard procedures, you will need to enter your personal data again, but not this time, but the Internet service provider - the “Next” button.
• If users plan to connect IP television, they need to specify the port for connecting it to the set-top box, if there is one;
• Here you should also configure “Yandex filters”, then click “Update” and wait until the entered information is saved.

Manual Internet connection

Setting up a keenetic lite 3 Zixel router to connect manually is not a difficult task. Its essence comes down to authorization. Connecting manually takes a lot of time, and the sequence of steps to connect to the network is as follows:

• Click “Start” to open “Control Panel”.
• On the settings page that opens, go to “Network and Internet”.
• From there, go to “Network and Sharing Center”.
• In the “Changing network settings” column, select “Creating and setting up a new connection.”
• In it, select “Connect to the Internet” – “Next”.
• In the column “How do you want to connect?” select the “High-speed (with PPPoE)” option.

• When asked to enter the information received from the service provider, enter the ones specified by the provider - this is your login from the contract and password.
• Return to the “Network and Sharing Center”, where in the left column select “Change settings”.
• Use it to go to the “High-speed connection”, which is in the disabled state.
• After double-clicking, an authorization window will open, here click on the “Connect” button, everything will work. At the end of these steps, drag the icon to any comfortable spot for the user.

It is important to know! In the future, the keenetic lite (3) router settings can be changed at your own discretion. But if you reinstall Windows, the system will not even accept the correct login data; the entire operation will need to be done again to connect again.

Home ru

This provider uses a connection standard like PPPoE, but not always. This depends on its branches, for example, in Eastern Siberia, dynamic IP addresses are used for connection. However, the PPPoE protocol remains one of the most popular throughout the CIS. Connecting Dom.ru takes place in two stages, the first one will require:

1. Open the Internet and go from it to “Connection”.
2. Next, find the Broadband connection item.
3. Check the box next to “Use connector”.
4. The “Enable” and “Use to access the Internet” options must be active.
5. In “IP Settings” select the “No IP address” option.
6. Here, in “MAC address”, select “Default” - “Apply”.

At the next stage, apply the following actions:

1. In the PPPoE/VPN section, select “Add connection”.
2. Check the box next to “Enable”.
3. In “Description” enter the name for the connection in Latin Internet.
4. In the “Type” field, select a protocol from the PPPoE list.
5. In the “Connect via” field – Broadband connection ISP.
6. Enter user data.
7. In the “Authentication Method” select “Auto” – “Apply”.

Having completed this operation, proceed to connecting the provider cable, for which the WAN port connector is used.

Rostelecom

When connecting Rostelecom, which uses the PPPoE protocol, you will need to repeat the same sequence of actions. True, as in the case of Dom.ru, the provider also uses a different type of connection depending on the region; this is typical, for example, for the Udmurt and Chuvash branches using Dynamic IP. To avoid misunderstandings and unnecessary gestures, before connecting, you need to clarify the connection protocol at the customer technical support service.

"Beeline"

This provider uses an L2TP connection, a new, according to reviews, promising connection protocol. It has a number of significant differences from the previous one, but the connection process also occurs in two stages. The first step is to apply a connection using an IP address:

1. Open the Internet and go from it to “Connection”.
2. Here, as in the case of Dom.ru, select the Broadband connection item and click on it.
3. Under the WAN port, check the “Use connector” checkbox; the icon will turn blue, indicating that the option is active.
4. Check “Enable interface” and “Use to access the Internet” if you plan to use IPTV.
5. In “IP Settings” select the “Automatic” option.
6. Click "Apply".

The second stage involves creating an L2TP tunnel, for this you need:

1. Open "PPPoE/VPN".
2. Select "Add connection".
3. Check the boxes “Enable interface” and “Use to access the Internet”.
4. In the “Access Point” select the “L2TP” option.
5. In the “Server Address” enter “tp.internet.beeline.ru”.
6. Below, enter the user data specified by the provider.
7. In the IP settings settings, set the option to “Automatic”.
8. Click “Apply” and wait for the changes made to be saved.

NetByNet

Netbaynet uses the PPTP connection protocol, which is not too separate from the others, but there are still differences in the connection. This applies to the use by the provider VPN servers, which sometimes provides benefits for subscribers.

The whole process goes as follows:

1. From the Internet, go to “Connection”.
2. In the “Connection Settings”, opposite the “Connection Type” line, select the PPTP option.
3. In “Connect via” specify Broadband connection (ISP).
4. In “Server Address” enter the data specified in the agreement with the provider.
5. The same applies to the user name and password.
6. In “IP Settings” select the “Automatic” option
7. The "Authentication Method" option is "Auto".
8. Click “Apply” and save the data changes made.

Backup connection via 3G

To connect to a 3G connection, you will need to go to the keenetic lite III interface and perform a simple operation in the following sequence:

1. Make sure that “Support for wireless modems for 3G networks” is in the active phase.
2. From the “System” section, go to the “Components” tab; if the option is not connected, it must be activated on the official website.
3. Log in to the device’s web interface using the default login and password admin/1234, if they have not been changed by the subscriber.
4. In the settings section, select “3G Configuration”.
5. Check the box next to “Enable 3G backup”.
6. Specify the operator, number, authorization method, user name and password.

This is followed by using a USB cable.

Wireless network

To connect a Wi-Fi connection to your home network, you need to do the following:

1. In the device interface, select the Wi-Fi section and go to the “Access Point” tab.
2. In the “Network name” field, enter the connection data, for example, your login.
3. In the “Use connection security” field, select the option WPA-PSK + WPA2-PSK.
4. In the “WPA Key” field, enter the password used for the connection.
5. Check the box next to “Enable access point” – “Apply”.

Setting in repeater mode

To configure the Zixel Kinetic router in this way, you must first of all change the device’s operating mode to “Amplifier”. For this purpose, it has a switch located on the rear panel. If this fails, you need to perform a simple operation in the settings:

1. In the “System” section, go to the “Mode” tab.
2. In the “Amplifier - Wi-Fi zone extension” field, check the box
3. Click on the “Apply” button.

IPTV

To enable the interactive television function, if this has not been done before, when connecting to the provider’s network, for example, you must do the following:

1. Enter Zyxel interface keenetic lite III and go to the “Internet” tab at the bottom.
2. From the “Connection” tab, open Broadband connection.
3. Check the “Use connector” checkbox under the port marked 4.
4. In the “Configure IP settings” field, select the “Automatic” option.
5. Click on the “Apply” button, after saving the changes, you can connect the cable to the set-top box.

Individual user connection settings

It is also possible to configure the Zixel router individually. To do this, you will need to connect to the device using an Internet cable and log into the interface. You only need to open it through Internet browser Explorer. The Internet center connection settings are configured using a web configurator; a connection via any selected PPPoE, PPTP or L2TP protocol is used using the methods described above, using the example of Dom.ru, Beeline and Netbaynet.

Dynamic DNS

The dynamic connection type is used by most providers; for this, they provide their users with the data required during authorization to connect to DNS servers. In case of connecting to public servers, unknown domain names and IP parameters. They are set independently in manual or automatic modes. The easiest way to do it is this:

1. Open the device web configurator.
2. From the settings section " home network» Go to the “IP Settings” tab.
3. Open “DHCP Server”, where you specify the addresses of the public DNS server.

Security Settings

To increase the security functions when working on the network, you will first need to perform such an action as changing the password to wifi router. On Keenetic Lite, like any other device of this type, this is easy to do:

1. Open the web configurator.
2. Click on the signal level icon.
3. In the “Network name” field, indicate the changed data in Latin letters.
4. Do the same in the “Network key” field.
5. Click on the “Apply” button, then reboot the router and log in using the updated username and password.

Additionally, the keenetic lite-3 will benefit from setting up a firewall to protect against unauthorized penetration of third-party elements into the home network. To do this you will need:

1. Login to the web configurator again.
2. Select the "Security" menu, then go to the "Firewall" tab.
3. In the “Rules” field, enter the name of your home network.
4. Next, specify hosts with unrestricted access and block access for others.
5. Click on the “Add Rule” button, and then reboot the router again.

Parental control

The purpose of this function on Keenetic Lite-3 is to limit access to the home network in certain time when children are unattended by their parents. Moreover, the router itself is in access point mode and cannot be used using the designated devices.

For this:

1. Open the web configurator.
2. Select the “Home Network” item, from where go to the “Devices” tab.
3. Select the device name by clicking on the entry.
4. In the “Online Registration” window that opens, check the “ Permanent IP address", click on the "Register" button.
5. After that, open the “System” item and go to the “Schedule” tab, click on the “Add schedule” button.
6. In the new “Schedule Settings” window, select devices and define work time by clicking on the “Apply” button.

But it is much easier to implement Parental Control if you use the Yandex.DNS service: the principle is the same, but more convenient and free.

Changing the function of the buttons

The functions of the buttons are configured on the Keenetic Lite-3 router by default, but you can always “remake” them in your own way in system parameters web configurator. To do this you need:

1. Open main menu.
2. Select “System” and go to the “Buttons” tab.
3. In the list that opens, select any option for their functioning that is convenient for you.
4. Click on the “Apply” button.

Setting up the printer

For keenetic lite-3, working with printers is a painful topic, especially with regard to new firmware, although such a problem was not observed before. But still, there is one way that works flawlessly:

1. Connect the printer to the USB connector of the Internet center using a direct connection.
2. After opening the web interface, specify the printer’s IP address: standard 192.168.1.1.
3. Go to the "System Monitor" section to make sure that the printer is visible to the device.
4. Open the “System” tab, in the right column at the bottom, in the “USB devices” section, the corresponding line will appear: printer and device name.
5. Open the “Applications” section, go to the MS Windows network, where check the “Enable” and “Allow access without authorization” - “Save” checkboxes.
6. Go to Windows Explorer and address bar enter the router data (192.168.1.1). If the printer is displayed there, right-click on its shortcut to open context menu- "To plug".
7. To check the printer connection, go to the “Control Panel”: it will be visible in the “Printers and Faxes” section under its name.

Setting up DLNA on the router

All keenetic lite III Internet centers have access to the DLNA server, which is popular among many users, and it is quite easy to set up:

1. Open the web configurator.
2. Go to the “System” section, and from there go to the “Components” tab.
3. Check the “DLNA server” box.
4. Click on the “Apply” button and wait for the update.

Setting up a VPN server

To configure a VPN server, exactly the same steps are used as for setting up a DLNA server. You need to go to the “Components” tab and check the required box. If the option is not in the list of components, you will need to go to the “Updates” tab, check the “VPN server” box and click on the “Update” button. After installation, you need to configure it:

1. In the “Applications” section, select the service and specify the interface to connect to – Home network.
2. Next, you need to enable the “Client Address Translation (NAT)” option.
3. After that, go to the “System section”, where select the “Users” tab.
4. Open the “Add users” item, enter login information and check the box next to “Access right” - “Save”.

Setting up a torrent client on the router

It is possible to configure a similar option in Keenetic Lite III routers, but support for Transmission torrent clients is limited in terms of download and upload speeds. The data transfer is so low that there is no point in fiddling with the settings.

Those who are not stopped by this configure the option as shown in the example of setting up a DLNA server.

Possible malfunctions and ways to eliminate them

Any device is prone to problems and malfunctions, and the keenetic lite III is no exception. Failures, freezing and slowdown of the system are possible; it is impossible to foresee everything in advance, just as it is impossible to list the problems that arise with the router. The router system has a debugging mode; it is installed like this:

1. From there, go to the “Diagnostics” tab, where click on the “Start debugging” button.

After this, the corresponding icon will appear at the top of the system monitor; by clicking on it, you can observe and control the process, terminate it or start it again.

Firmware update

It is recommended to update the firmware on the Keenetic Lite router while setting up basic functions and connections, preferably to the latest improved version of ndms v2 08 abco. Updating the firmware is done in several ways, the most common is downloading the firmware file. But there are more convenient and quick solutions, which do not require special skills.

Via web interface

The most acceptable firmware option of all existing ones, the main condition is an Internet connection. All you need for this:

1. Go to the “System” settings section.
2. In the right column, in “System Information”, find the “Updates” item.
3. If it says “Available” opposite, click on this link.
4. A list of all available updates will appear; click the “Update” button.
5. After downloading the firmware components, the router will automatically reboot.

Via mobile application

First you need to download the application on Google services Play or AppStore. Then launch My.Keenetic, after making sure that it is active and there is an Internet connection. After that, go to the “System” settings, where select “Firmware”. A list of current update components will open, click “Device Update”.

Via USB device

This function is not supported in Zyxel keenetic lite III; firmware can only be flashed using the above methods.

Resetting the router to factory settings

When unstable work Keenetic Lite device, frequently recurring problems or system slowdown, you will need to reset the settings, this will be much easier. There are two methods: hardware and software. The first one is most preferable because the process
takes just a few seconds. You just need to press the “Reset” button located on the back panel of Keenetic Lite using a long thin object: a pin or needle. Second: go to system settings, then go to the “Options” tab, click on the “Return to factory settings” button. After this, confirm the action by clicking on the “Yes” button when the system issues a warning that all installed files will be deleted.

Conclusion

Zixel keenetic lite III is worthy of users' attention. Of course, it cannot be called the best router in the world, but in terms of price-quality criteria, you definitely won’t find anything like it. The device has positive and negative sides, but there are incomparably more of the former, so you may not pay attention to the latter.

pros

Among the positive aspects of Keenetic Lite, users note the following:

• convenient and functional;
• Russian-language interface;
• has high speed characteristics and reception radius;
• reliable to use;
• simple settings for the zyxel keenetic lite III router;
• unpretentious in maintenance;
• does not overheat;
• inexpensive.

Minuses

As for negative ratings, users emphasize in Keenetic Lite:

• low Wi-Fi speed;
• ineffective support service;
• lack of many options;
• problems that arise during the second year of operation.

The new GIGA III uses an MT7621S 880 MHz processor, 256 MB DDR3 RAM, the previous generation Mediatek RT6856 with a frequency of 700 MHz and the same 256 Mbit random access memory. As you can see, the processor has received a good performance increase and, accordingly, the question arises - what are they spending on? additional features. As you remember, the previous generation used two USB 2.0 connectors, the updated version has one 3.0 connector and the other 2.0. What does this give? Higher speed of information exchange with those connected to the router hard drive or USB flash drive, up to 40 MB/s. But the biggest breakthrough in this model can be considered a Wi-Fi network operating at a frequency of 5 GHz with a speed of up to 867 Mbit/s (thanks to the IEEE 802.11ac standard), of course, the 2.4 GHz frequency has not gone away and connecting via it gives a maximum speed of 300 Mbit/s With. It should be noted that in order to use Wi-Fi standard AC, it is necessary that your device supports it or you can purchase it additionally Wi-Fi adapter. In all other respects, these models are similar, both LAN ports operate at a speed of 1000 Mbit/s, it is possible to connect 3G/4G modems, printers and flash drives/USB hard drives.

Appearance, from previous version, is not much different, the main difference is the location of the antennas, now they are on the side and cannot be twisted out.

I suggest moving on to setting up the Zyxel Keenetic GIGA III to make it easier to navigate the article, below is the table of contents:

Before you start setting up your router, check if it is turned on automatic retrieval of network settings on the computer or laptop from which the setup will be performed. Next, using the included LAN port, connect one end to any LAN port of the router ( yellow color), the other end into a computer or laptop. Connect Zixel Giga 3 to power and press the power button on the back wall. Next, on your computer/laptop, open any browser (IE, Chrome, Mazilla, Opera, etc.), the router web interface page should open, if this does not happen, enter 192.168.1.1 in the address bar. If the router has been reset to factory settings or you are setting it up for the first time, a window will open asking you to perform Quick Setup or go to the web interface.

Quick Internet setup.

For quick setup, click the "Quick Setup" button.

Information will appear indicating that the provider's cable is connected to the WAN connector.

Select the country where you will use the Internet Center.

Please indicate your region or city of residence.

Select your provider from the list.

After this, enter your username and password. given to you by your provider. They must be specified in the contract.

Then you need to choose whether you want to enable Yandex DNS.

As a result, you will see a window with Internet settings options. To continue setting up Zyxel Keenetic GIGA III, select "Web Configurator".

Next, you will be asked to create and enter a password to connect to the web interface. It is only needed to log into the router’s web interface. We recommend using complex password, consisting of numbers, letters and special characters (!"№;). A strong password will protect your router and increase its security.

You will be taken to the "System Monitor" menu, here you can see the main parameters and settings of the router.

Setting up the Internet manually on Zyxel Keenetic GIGA III

In addition to quickly setting up the Internet, you can configure it manually; to do this, click the “Internet” menu, select the tab that corresponds to the protocol of your provider. The most popular protocols are PPPoE, L2TP and PPPtP, respectively, tab "PPPoE/VPN" and click the "Add connection" button.

In the window that opens, set the appropriate settings for your provider. For example, for Beeline it will be:

Description- enter a custom name,
Type (protocol)- L2TP
Username- indicate the data from the contract with the provider
Password- enter the password specified in the agreement.
Server address- tp.internet.beeline.ru

For Rostelecom:

Description- arbitrary name
Type (protocol)- PPPoE
Username- use from the agreement with the provider
Password- information in the agreement with the provider

As for the mobile 3G/4G Internet, after you have inserted the modem, in the menu " System Settings", the "USB" tab should see the connected modem.

In addition, if you go to the "Internet" menu, the "3G/4G" tab should see a connection via a 3G/4G modem.

Zyxel Keenetic GIGA III firmware update

Video review of the Zyxel firmware update.

Updating the firmware is a very important point in the stable and safe operation of the router, plus the first firmware does not have the torrent client and DLNA functions. So we recommend that you update the firmware immediately after setting up the Internet. This can be done in two ways:

1) Semi-automatic firmware update;

2) Update manually.

Let's look at each method in more detail.

1 Method. Semi-automatic firmware update.

This method is extremely simple, but requires an Internet connection from your router. Go to the "System" menu, select the "Update" tab and click the "Update" button.

As a result, the router will download the updated firmware version, install it and reboot. After a few minutes, your router will be ready to use.

2 Method. Update the firmware manually.

This method is more convenient because it does not require a direct connection to the router to the Internet. From a computer/laptop with Internet access, you need to download the firmware file and then “slip” it into the router.

First of all, look at the firmware version on the router’s web interface; it can be seen in the “System Monitor” line “NDMS Version”.

Then go to the official Zyxel website and look at the latest firmware version in the “Support” tab. If it is newer than the one installed on the router, download it and unzip the downloaded archive.

After that, on the web interface, go to the "System" menu, select the "Files" tab, click on "firmware" in the window that opens, click the "Select file" button and specify the path to the unzipped file, click the "Replace" button.

A few minutes later, after rebooting the router, you will see the updated firmware version in the “NDMS Version” line.

Setting up Wi-Fi.

Before we start setting up, I want to say that a secure Wi-Fi network has already been configured and has a network name and password, which you can see on the router sticker.

If for some reason you are not satisfied with the network name or password, you can change it. To do this on web interface select menu " Wi-Fi network". In the "2.4 GHz Access Point" tab, you can change the network name and password; we recommend creating a complex password, consisting of numbers, letters and special characters (!"No;), this way you will protect your network from neighbors and other uninvited persons If you wish, you can change channel , we recommend leaving all other settings at default.

After setting, do not forget to click the "Apply" button.

Now you can start setting up Wi-Fi 5GHz, to do this, select the “5GHz Access Point” tab. indicate the name of the network, usually indicate the same name as for the 2.4 GHz network with the addition of the prefix “5G”, so that devices can distinguish which frequency to connect to. We recommend using the same password as for the 2.4 GHz frequency.

Using a torrent client on Zyxel Keenetic GIGA III.

In addition to standard functions for most functions, the Zyxel Keenetic GIGA III router can download torrents and make a connected USB drive available over the network. To take advantage of these functions, connect to USB port flash drive or external USB HDD. Next, on the web interface, go to the "Applications" menu and select the "BitTorrent Client" tab, check the "Enable" checkbox, in the "Directory for storing files" line, click on the ellipsis and in the window that opens, point to the entire media or select a folder in it in which will save torrents and service files.

In order to add a torrent for downloading, click the "Manage downloads" button or on new page browser enter 192.168.1.1:8090 . In this window you will have the opportunity to manage torrents; in order to add a torrent, click the “Open torrent” button (folder with an up arrow), in the window that appears, click “Select file” and specify the path to the previously downloaded torrent file and click “Ok”.

As a result, you will see the file downloading.

In order to access the media connected to the router from Windows computers/laptops, press the key combination “Win” + “R”, enter \\192.168.1.1 and press the Enter button.

In order to make files available for the TV, go to the router’s web interface in the “Applications” menu, “” tab DLNA Server", check the "Enable" checkbox, then click "Directory for media files" and specify a folder or the entire USB drive.

Thus, you have made USB storage available for TVs using the DLNA protocol (the TV must support this function).

Video review of Zyxel Keenetic GIGA III.

Bottom line.

Zyxel Keenetic GIGA III router is very advanced network device, which will satisfy most users. It has quite serious hardware, which gives it the opportunity not to “cut” the Internet speed, even if the provider provides you with a speed of 1000 Mbit/s. Plus, there are all sorts of functions: support for 3G/4G modems, printers and USB storage devices, and the presence of two USB ports frees you up to use these functions, and you also don’t have to forget about super-fast Wi-Fi. In general, Zyxel Kinetic Giga 3 is a worthy representative of Zyxel.